368 results on '"Peng, Chaoqun"'
Search Results
2. Microstructure evolution and shear behavior of Pb–16Sn–7.5Sb–xAg/Cu joints
3. Room and high temperature mechanical properties of spray co-deposited SiCP/Al-Cu-Mg-Ag composite: Effect of pre-stretching
4. Effects of alloying elements on the corrosion behavior and discharge performance of Al-Zn-Mg-In-Ti-Sn sacrificial anode
5. Calculation method of deflection of high strength steel reinforced ultra-high-performance concrete beam
6. Effect of voltage and time on microstructure and corrosion resistance of anodic oxidation film on Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy
7. The influence of ball milling conditions on the powder characteristics and sintering densification of Mo[sbnd]Cu alloy
8. Experimental and finite element analysis of thermal conductivity in Cu matrix composites reinforced with surface-modified Kovar particles
9. A study on hot deformation behaviors and microstructures of 10 vol% SiCP/Al–Cu–Mg–Ag composite prepared by spray co-deposition and extrusion
10. Strengthening Mg–8Li–3Al–2Zn-1Gd-0.2Zr alloy by combining hot extrusion and cold rolling
11. Impact of Back-Gate Radiation on Single-Event Effects of Ultrathin Body and Buried Oxide Fully Depleted Silicon-on-Insulator MOSFETs
12. Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy
13. Ab initio molecular dynamics study on the local structures and solid/liquid interface in liquid Al-Ti and Al-B-Ti alloys
14. Effect of voltage on microstructure and corrosion resistance of micro-arc oxidation coating on Mg–Zn–Ca biodegradable alloy
15. Influence of cooling rate on the corrosion behavior of Al–Zn–In–Mg–Ag sacrificial anode
16. Interfacial diffusion behavior and properties of hot-pressed Kovar/Cu composites
17. Improving the corrosion resistance of Mg-8Li-3Al-2Zn alloy by combining Gd alloying and hot extrusion
18. The evolution of precipitates and mechanical properties in rapidly solidified 2195 Al–Cu–Li alloy during thermal exposure
19. Microstructure, mechanical property, in vitro biodegradation behavior and biocompatibility of as-extruded Mg-2Zn-0.2Zr-xNd (x = 0.2, 0.6, 1.0) alloys
20. Characteristics of tungsten coating on silicon particles prepared by sol-gel method
21. Microstructure and Mechanical Properties of the Extruded Al-Cu-Mn-Sc-Zr Alloy during Single-Stage and Two-Stage Aging
22. Microstructural evolution and mechanical properties of 2195 Al-Li alloy processed by rapid solidification and thermo-mechanical processing
23. Enhancing mechanical properties of 7055 Al alloy by adding 1 wt.% Mg and tailoring the precipitations
24. Improved strength and ductility of rapidly solidified 2195 alloy by pre-rolling combined with double aging and interrupted aging
25. Suppressing the dissolution of vanadium by organic-inorganic hybrid for aqueous zinc-ion batteries
26. Microstructure, mechanical and thermo-physical properties of hot-rolled Mo-50Cu composite
27. Influence of 0.6 wt% Sc/Nd on the microstructure, mechanical property and in vitro biodegradation behavior of as-cast Mg-2Zn-0.2Zr alloy
28. The separation behavior of impurity in antimony during vacuum distillation
29. Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution
30. Effective thermal conductivity of ellipsoidal inclusion-reinforced composites: Theoretical model and numerical simulation
31. Precipitation and mechanical properties for rapidly solidified Al-Cu-Li alloy: Effect of pre-rolling
32. Influence of Sc on the microstructure, degradation behavior, biocompatibility in vitro and mechanical property of Mg-2Zn-0.2Zr alloy
33. Effect of Sc/Sm microalloying on microstructural and properties of Mg-2Zn-0.3Ca biodegradable alloy
34. Vat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation.
35. Microstructure and properties of Al-Si/Al-SiCp bilayer composite for electronic packaging
36. Precipitation behavior and properties of Al–50Si–0.5X (X = Sc, La, Nb) alloys
37. Hot deformation behavior and finite element simulation of hot isostatic pressed Mo-50Cu composite
38. Comparison of microstructure and mechanical properties of Al-Mg-Li-Sc-Zr alloys processed by ingot metallurgy and rapid solidification
39. Influence of aging treatment on the microstructure, mechanical properties and corrosion behavior of spray deposited Al-Mg-Li-Sc-Zr alloy
40. Ultra-high strength Al-Zn-Mg-Cu alloys with high zinc content prepared via powder hot extrusion
41. Microstructural evolution and mechanical performance of in-situ TiB2/AlSi10Mg composite manufactured by selective laser melting
42. Microstructure evolution and mechanical properties for rapidly solidified Cu–3Ag-0.5Zr alloy during isothermal compression
43. Multistage aging treatment influenced precipitate characteristics improve mechanical and corrosion properties in powder hot-extruded 7055 Al alloy
44. Microstructure and mechanical properties of Al-Mg-Li-Sc-Zr alloy processed by spray deposition and thermo-mechanical processes
45. Effects of alloying elements on the microstructure and corrosion behavior of Mg–Li–Al–Y alloys
46. Manipulating the microstructure and tensile properties of selective laser melted Al–Mg-Sc-Zr alloy through heat treatment
47. Low-temperature annealing behavior and tensile properties of the rapidly solidified Cu3Ag0.5Zr0.4Cr0.35Nb alloy reinforced by cold rolling
48. Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x = 5, 8, 11 wt.%)
49. Effect of repetitious retrogression and re-aging treatment on the microstructure, strength and corrosion behavior of powder hot-extruded 7055 Al alloy
50. Ultrafine grained Cu–3Ag-xZr (x = 0.5, 1.0 wt%) alloys with high strength and good ductility fabricated through rapid solidification and cryorolling
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.