Search

Liquid crystal elastomer (LCE) actuators are generally limited in shape, size, and quantity by the need for aligning via stretching and fixing via photopolymerizing. A thermoplastic LCE is presented that may be vacuum thermoformed into centimeter-sized hemispheres. The scalable industrial process induces LCE alignment without requiring postfixing. The hemispheres display remarkable properties, actuating with strains around 20% and transitioning from opaque and scattering to highly translucent upon heating: both the physical and optical effects are fully reversible. Simulations reveal the LCE experiences biaxial strains during processing, the magnitude varying as a function of location on the hemisphere: the resulting alignment describing the hemisphere actuation well. The thermoplastic LCE hemispheres may be combined to form complete spheres by simply heating the joint. The hemisphere can also be physically deformed into a ball which can then unfold back into the hemisphere again. By doping the hemispheres with photoswitches, fluorescent or photothermal dyes, devices are formed for light collection and redistribution, addressable water containers that may pour at will, and light-responsive surfing devices. This is the first example of an LCE amenable to high-volume industrial vacuum thermoforming which may lead to intricate 3D-shaped actuators with new functional properties., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

We use molecular dynamics simulations to unravel the physics underpinning the light-induced density changes caused by the dynamic trans-cis-trans isomerization cycles of azo-mesogens embedded in a liquid crystal polymer network, an intriguing experimental observation reported in the literature. We employ two approaches, cyclic and probabilistic switching of isomers, to simulate dynamic isomerization. The cyclic switching of isomers confirms that dynamic isomerization can lead to density changes at specific switch-time intervals. The probabilistic switching approach further deciphers the physics behind the non-monotonous relation between density reduction and light intensities observed in experiments. Light intensity variations in experiments are accounted for in simulations by varying the trans-cis and cis-trans isomerization probabilities. The simulations show that an optimal combination of these two probabilities results in a maximum density reduction, corroborating the experimental observations. At such an optimal combination of probabilities, the dynamic trans-cis-trans isomerization cycles occur at a specific frequency, causing significant distortion in the polymer network, resulting in a maximum density reduction., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Light-induced oscillatory behavior of liquid crystal polymer network (LCN) films has been demonstrated by several researchers in the past decade. Similarly, oscillations in LCN films under constant thermal stimulus have been reported recently, although the mechanism and the factors that govern the oscillatory behavior are not well understood. In this work, we study the dynamics of self-sustained oscillations exhibited by LCN films under a constant thermal stimulus through experiments and simulations. Geometrically asymmetric films such as a right triangle and an equilateral triangle are obtained from a twisted nematic square film. A multiphysics computational framework using the finite element method is developed to simulate the oscillatory behavior of the LCN films kept on a hot plate. The framework accounts for a coupling between heat transfer and mechanical deformations during the oscillations. Small temperature fluctuations (≈ 1 °C) coupled with gravity induced torque are shown to drive the oscillatory behavior at a specific plate temperature. We show for the first time that self-sustained oscillations can also be achieved in symmetric shapes, such as square films, by creating a thickness tapering between two opposite edges. The frequency of the oscillations is found to be in the range of 0.5 to 2.5 Hz for different geometries studied. The oscillation temperature depends on the mean thickness, size, and thickness profile of the films. As a possible application, we demonstrate a thermally actuated optical chopper using the oscillatory response of the films.

We describe photo-thermo-mechanical actuation and its dynamics in thin films of a liquid crystal networks (LCN) under near infrared (NIR) illumination through experiments and simulations. Splay aligned films of different thicknesses (25 μm to 100 μm) were obtained by crosslinking a mixture of mono-functional and bi-functional liquid crystal monomers. The NIR-driven thermo-mechanical actuation was achieved by adding an NIR dye to the monomer mixture. The absorption of incoming radiation by the dye molecules raises the local temperature of the film causing an order-disorder (nematic-isotropic) transition, thereby resulting in a macroscopic shape change. We have investigated the effect of film thickness, NIR laser power and dye concentration on the tip displacement of the films in a cantilever configuration. The experimental findings and finite element simulation results are in reasonably good quantitative agreement. Despite using lower NIR powers than typically employed, the films show high actuation and large displacements. After achieving saturation in actuation, the films exhibit a flutter behavior which is discussed in light of the observed overshoot in the tip displacement for certain intensities and thicknesses. Finally, using a solar simulator, we also show the visible light response of the film.

Soft actuators allowing multifunctional, multishape deformations based on single polymer films or bilayers remain challenging to produce. In this contribution, direct ink writing is used for generating patterned actuators, which are in between single- and bilayer films, with multifunctionality and a plurality of possible shape changes in a single object. The key is to use the controlled deposition of a light-responsive liquid crystal ink with direct ink writing to partially cover a foil at strategic locations. We found patterned films with 40% coverage of the passive substrate by an active material outperformed "standard" fully covered bilayers. By patterning the film as two stripes, a range of motions, including left- and right-handed twisting and bending in orthogonal directions, could be controllably induced in the same actuator. The partial coverage also left space for applying liquid crystal inks with other functionalities, exemplified by fabricating a light-responsive green reflective actuator whose reflection can be switched "on" and "off". The results presented here serve as a toolbox for the design and fabrication of patterned actuators with dramatically expanded shape deformation and functionality capabilities.

Liquid crystal polymers are a special class of soft materials that can change their shape in response to numerous stimuli such as light, heat, electric field, and chemicals. The ability to tailor the deformed shape by tuning the alignment of mesogens across the film has enabled the researchers to generate unique motions from these liquid crystal polymer thin films. Simulating such motions might allow us to understand the underlying mechanisms better and could lead to novel designs. In this paper, we analyze the kinematics of the light-driven rolling motion of wheels fabricated with azobenzene-doped glassy liquid crystal networks through a one-way coupled transient photo-mechanical model. The influence of the isomerization parameters and the alignment of mesogens through the thickness on the kinematics of the wheel is presented. The developed model is further used to assess the feasibility of a light-actuated four-wheeled cart with wheels made of azobenzene-doped liquid crystal network thin films.

Achieving oscillatory motion in polymers without requiring on/off switching of stimuli is a current challenge. Hereby, a free-standing liquid crystal polymer (LCP) is demonstrated to undergo a sustained oscillatory motion when triggered by light, moving back and forth, resembling the motion of a rocking-chair. Two polymer films having different azobenzene photo-switches have been studied, revealing photoswitch requirements as well as illumination conditions necessary to sustain oscillations. The motion presented here shows how feedback loops involving light-triggered actuation, self-shadowing and a shifting center of gravity can be utilized to achieve self-sustained motion in free-standing polymers., Competing Interests: The authors declare no conflict of interest., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

A triangular shaped liquid crystal network is shown to undergo a continual, rocking chair-like oscillatory chaotic motion upon exposure to a surface of constant temperature. With the addition of an azobenzene chromophore, dual response is achieved, extending the actuation freedom towards a film that shows rocking and rolling motion.

Liquid crystalline networks have been fashioned into thin films with tapered thicknesses, revealing the possibility of rolling up extremely tightly when triggered thermally or with light. Compared to the often limited bending shown previously in liquid crystal network actuators, these tapered films curl up several hundreds of degrees. Finite element results of simulated functionally graded thin films with tapered thicknesses corroborate well with experimental work.