Search

Exoskeletons for rehabilitation can help enhance motor recovery in individuals suffering from neurological disorders. Precision in movement execution, especially in arm rehabilitation, is crucial to prevent maladaptive plasticity. However, current exoskeletons, while providing arm support, often lack the necessary 3D feedback capabilities to show how well rehabilitation exercises are being performed. This reduces therapist acceptance and patients' performance. Augmented Reality technologies offer promising solutions for feedback and gaming systems in rehabilitation. In this work, we leverage HoloLens 2 with its advanced hand-tracking system to develop an application for personalized rehabilitation. Our application generates custom holographic trajectories based on existing databases or therapists' demonstrations, represented as 3D tunnels. Such trajectories can be superimposed on the real training environment. They serve as a guide to the users and, thanks to colour-coded real-time feedback, indicate their performance. To assess the efficacy of the application in improving kinematic precision, we tested it with 15 healthy subjects. Comparing user tracking capabilities with and without the use of our feedback system in executing 4 different exercises, we observed significant differences, demonstrating that our application leads to improved kinematic performance. 12 clinicians tested our system and positively evaluated its usability (System Usability Scale score of 67.7) and acceptability (4.4 out of 5 in the 'Willingness to Use' category in the relative Technology Acceptance Model). The results from the tests on healthy participants and the feedback from clinicians encourage further exploration of our framework, to verify its potential in supporting arm rehabilitation for individuals with neurological disorders., Comment: 25 pages, 9 figures, 3 tables, journal submission

Cable-driven exosuits have the potential to support individuals with motor disabilities across the continuum of care. When supporting a limb with a cable, force sensors are often used to measure tension. However, force sensors add cost, complexity, and distal components. This paper presents a design and control approach to remove the force sensor from an upper limb cable-driven exosuit. A mechanical design for the exosuit was developed to maximize passive transparency. Then, a data-driven friction identification was conducted on a mannequin test bench to design a model-based tension controller. Seventeen healthy participants raised and lowered their right arms to evaluate tension tracking, movement quality, and muscular effort. Questionnaires on discomfort, physical exertion, and fatigue were collected. The proposed strategy allowed tracking the desired assistive torque with an RMSE of 0.71 Nm (18%) at 50% gravity support. During the raising phase, the EMG signals of the anterior deltoid, trapezius, and pectoralis major were reduced on average compared to the no-suit condition by 30%, 38%, and 38%, respectively. The posterior deltoid activity was increased by 32% during lowering. Position tracking was not significantly altered, whereas movement smoothness significantly decreased. This work demonstrates the feasibility and effectiveness of removing the force sensor from a cable-driven exosuit. A significant increase in discomfort in the lower neck and right shoulder indicated that the ergonomics of the suit could be improved. Overall this work paves the way towards simpler and more affordable exosuits., Comment: 19 pages, 10 figures, and 3 tables in the main manuscript. 12 pages, 4 figures, and 13 tables in the supplementary materials

This work addresses human intention identification during physical Human-Robot Interaction (pHRI) tasks to include this information in an assistive controller. To this purpose, human intention is defined as the desired trajectory that the human wants to follow over a finite rolling prediction horizon so that the robot can assist in pursuing it. This work investigates a Recurrent Neural Network (RNN), specifically, Long-Short Term Memory (LSTM) cascaded with a Fully Connected layer. In particular, we propose an iterative training procedure to adapt the model. Such an iterative procedure is powerful in reducing the prediction error. Still, it has the drawback that it is time-consuming and does not generalize to different users or different co-manipulated objects. To overcome this issue, Transfer Learning (TL) adapts the pre-trained model to new trajectories, users, and co-manipulated objects by freezing the LSTM layer and fine-tuning the last FC layer, which makes the procedure faster. Experiments show that the iterative procedure adapts the model and reduces prediction error. Experiments also show that TL adapts to different users and to the co-manipulation of a large object. Finally, to check the utility of adopting the proposed method, we compare the proposed controller enhanced by the intention prediction with the other two standard controllers of pHRI.

Applications involving humans and robots working together are spreading nowadays. Alongside, modeling and control techniques that allow physical Human-Robot Interaction (pHRI) are widely investigated. To better understand its potential application in pHRI, this work investigates the Cooperative Differential Game Theory modeling of pHRI in a cooperative reaching task, specifically for reference tracking. The proposed controller based on Collaborative Game Theory is deeply analyzed and compared in simulations with two other techniques, Linear Quadratic Regulator (LQR) and Non-Cooperative Game-Theoretic Controller. The set of simulations shows how different tuning of control parameters affects the system response and control efforts of both the players for the three controllers, suggesting the use of Cooperative GT in the case the robot should assist the human, while Non-Cooperative GT represents a better choice in the case the robot should lead the action. Finally, preliminary tests with a trained human are performed to extract useful information on the real applicability and limitations of the proposed method.

This paper addresses human-robot collaboration (HRC) challenges of integrating predictions of human activity to provide a proactive-n-reactive response capability for the robot. Prior works that consider current or predicted human poses as static obstacles are too nearsighted or too conservative in planning, potentially causing delayed robot paths. Alternatively, time-varying prediction of human poses would enable robot paths that avoid anticipated human poses, synchronized dynamically in time and space. Herein, a proactive path planning method, denoted STAP, is presented that uses spatiotemporal human occupancy maps to find robot trajectories that anticipate human movements, allowing robot passage without stopping. In addition, STAP anticipates delays from robot speed restrictions required by ISO/TS 15066 speed and separation monitoring (SSM). STAP also proposes a sampling-based planning algorithm based on RRT* to solve the spatio-temporal motion planning problem and find paths of minimum expected duration. Experimental results show STAP generates paths of shorter duration and greater average robot-human separation distance throughout tasks. Additionally, STAP more accurately estimates robot trajectory durations in HRC, which are useful in arriving at proactive-n-reactive robot sequencing., Comment: 7 pages, 7 figures. Accepted at IEEE ROMAN 2023

Combining symbolic and geometric reasoning in multi-agent systems is a challenging task that involves planning, scheduling, and synchronization problems. Existing works overlooked the variability of task duration and geometric feasibility that is intrinsic to these systems because of the interaction between agents and the environment. We propose a combined task and motion planning approach to optimize sequencing, assignment, and execution of tasks under temporal and spatial variability. The framework relies on decoupling tasks and actions, where an action is one possible geometric realization of a symbolic task. At the task level, timeline-based planning deals with temporal constraints, duration variability, and synergic assignment of tasks. At the action level, online motion planning plans for the actual movements dealing with environmental changes. We demonstrate the approach effectiveness in a collaborative manufacturing scenario, in which a robotic arm and a human worker shall assemble a mosaic in the shortest time possible. Compared with existing works, our approach applies to a broader range of applications and reduces the execution time of the process., Comment: 12 pages, 6 figures, accepted for publication on IEEE Transactions on Cybernetics in March 2023

The ease of use of robot programming interfaces represents a barrier to robot adoption in several manufacturing sectors because of the need for more expertise from the end-users. Current robot programming methods are mostly the past heritage, with robot programmers reluctant to adopt new programming paradigms. This work aims to evaluate the impact on non-expert users of introducing a new task-oriented programming interface that hides the complexity of a programming framework based on ROS. The paper compares the programming performance of such an interface with a classic robot-oriented programming method based on a state-of-the-art robot teach pendant. An experimental campaign involved 22 non-expert users working on the programming of two industrial tasks. Task-oriented and robot-oriented programming showed comparable learning time, programming time and the number of questions raised during the programming phases, highlighting the possibility of a smooth introduction to task-oriented programming even to non-expert users., Comment: This article has been accepted for publication in the International Journal of Computer Integrated Manufacturing, published by Taylor & Francis

Human-robot co-manipulation of soft materials, such as fabrics, composites, and sheets of paper/cardboard, is a challenging operation that presents several relevant industrial applications. Estimating the deformation state of the co-manipulated material is one of the main challenges. Viable methods provide the indirect measure by calculating the human-robot relative distance. In this paper, we develop a data-driven model to estimate the deformation state of the material from a depth image through a Convolutional Neural Network (CNN). First, we define the deformation state of the material as the relative roto-translation from the current robot pose and a human grasping position. The model estimates the current deformation state through a Convolutional Neural Network, specifically a DenseNet-121 pretrained on ImageNet.The delta between the current and the desired deformation state is fed to the robot controller that outputs twist commands. The paper describes the developed approach to acquire, preprocess the dataset and train the model. The model is compared with the current state-of-the-art method based on a skeletal tracker from cameras. Results show that our approach achieves better performances and avoids the various drawbacks caused by using a skeletal tracker.Finally, we also studied the model performance according to different architectures and dataset dimensions to minimize the time required for dataset acquisition, Comment: Pre-print, Accepted to Robotics and Computer Integrated Manufacturing

A good estimation of the actions' cost is key in task planning for human-robot collaboration. The duration of an action depends on agents' capabilities and the correlation between actions performed simultaneously by the human and the robot. This paper proposes an approach to learning actions' costs and coupling between actions executed concurrently by humans and robots. We leverage the information from past executions to learn the average duration of each action and a synergy coefficient representing the effect of an action performed by the human on the duration of the action performed by the robot (and vice versa). We implement the proposed method in a simulated scenario where both agents can access the same area simultaneously. Safety measures require the robot to slow down when the human is close, denoting a bad synergy of tasks operating in the same area. We show that our approach can learn such bad couplings so that a task planner can leverage this information to find better plans., Comment: Accepted at IEEE Int. Conf. on Emerging Technology and Factory Automation, 2022

Human awareness in robot motion planning is crucial for seamless interaction with humans. Many existing techniques slow down, stop, or change the robot's trajectory locally to avoid collisions with humans. Although using the information on the human's state in the path planning phase could reduce future interference with the human's movements and make safety stops less frequent, such an approach is less widespread. This paper proposes a novel approach to embedding a human model in the robot's path planner. The method explicitly addresses the problem of minimizing the path execution time, including slowdowns and stops owed to the proximity of humans. For this purpose, it converts safety speed limits into configuration-space cost functions that drive the path's optimization. The costmap can be updated based on the observed or predicted state of the human. The method can handle deterministic and probabilistic representations of the human state and is independent of the prediction algorithm. Numerical and experimental results on an industrial collaborative cell demonstrate that the proposed approach consistently reduces the robot's execution time and avoids unnecessary safety speed reductions., Comment: Accepted in IEEE Robotics and Automation Letters, 2022

This paper improves the performance of RRT$^*$-like sampling-based path planners by combining admissible informed sampling and local sampling (i.e., sampling the neighborhood of the current solution). An adaptive strategy regulates the trade-off between exploration (admissible informed sampling) and exploitation (local sampling) based on online rewards from previous samples. The paper demonstrates that the algorithm is asymptotically optimal and has a better convergence rate than state-of-the-art path planners (e.g., Informed-RRT*) in several simulated and real-world scenarios. An open-source, ROS-compatible implementation of the algorithm is publicly available., Comment: Preprint of manuscript accepted for publication on Autonomous Robots, Springer Nature

In this paper, we propose a path re-planning algorithm that makes robots able to work in scenarios with moving obstacles. The algorithm switches between a set of pre-computed paths to avoid collisions with moving obstacles. It also improves the current path in an anytime fashion. The use of informed sampling enhances the search speed. Numerical results show the effectiveness of the strategy in different simulation scenarios., Comment: Submitted to IROS 2021. "This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible"