Search

This work is about improvement of a maceration method in order to achieve a green process for the enrichment of virgin olive oil (VOO) with natural antioxidants, specifically from oregano leaves. This goal was accomplished after evaluating different mechanical methods, i.e. magnetic stirring, sonication, vertical stirring and sonication in combination with vertical stirring, for promoting the extraction of the antioxidants from oregano. The results obtained indicated that the best extraction procedure was vertical stirring at 1000 r.p.m. for 3 h. Therefore, these conditions were selected to enrich VOO with phenolic acids (mainly rosmarinic acid) and endogenous antioxidants (o-coumaric and vanillic acids), and further determine their stability at room temperature or under temperature stress (50°C) during 45 days. Quantitative analysis of rosmarinic, o-coumaric and vanillic acids was carried out by an off-line, solid phase extraction, capillary zone, electrophoresis method combined with diode-array detector (SPE-CE-DAD)., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

We report a novel method for the simultaneous determination of omeprazole and their main metabolites (omeprazole sulphide, omeprazole sulphone and 5-hydroxy omeprazole) in human urine samples. For this purpose, two new capillary electrophoresis (CE) methods were developed for the simultaneous determination of target compounds, using initially diode-array for optical detection and electrospray ionization-mass spectrometry (ESI-MS) for metabolites identification and identity confirmation. A new metabolite (5-hydroxysulphide omeprazole) was identified by electrospray ionization multi-stage mass spectrometry (ESI-MS2) fragment which was then used to support the proposed chemical structure. Pharmacokinetic results using CE method were compared with those obtained when a HPLC method was used. Equivalent pharmacokinetics profiles resulted when any analytical methods were carried out., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A new non-aqueous capillary electrophoresis method is proposed for the separation and simultaneous determination of cimetidine, ranitidine, roxatidine, nizatidine and famotidine by using a 30-cm long × 75 µm i.d. fused silica capillary and UV detection at 214 nm. Using a temperature of 25°C, an applied voltage of 15 kV, and a background electrolyte consisting of methanol containing 10 mM ammonium acetate and 0.2% acetic acid allowed the analytes to be separated in less than 4 min. The limits of detection obtained ranged from 7 and 17 µg L(-1). The proposed method was successfully used to determine the analytes in pharmaceutical preparations and its results were checked against an HPLC method.

A ThermoFinnigan sheath liquid flow capillary electrophoresis-mass spectrometry system designed for coupling via a co-axial interface was coupled through an adapted via an alternative, commercially available interface for orthogonal sampling. The affordable, reversible structural alterations made in the commercial LC-MS interface resulted in improved analytical performance. The results of a conventional capillary electrophoresis (CE) method using a commercial co-axial source to determine antioxidant phenolic acids present in virgin olive oil, were compared with those obtained by using a modified orthogonal sampling position. In both cases, separations were done using a 10 mM ammonium acetate/ammonium hydroxide buffer solution at pH 10.0 and a constant applied voltage of 25 kV. The operating variables for the mass spectrometry interface were re-optimized for the modified orthogonal orientation. This allowed the sheath liquid, sheath gas flow rates and capillary voltage to be lowered with respect to the co-axial coupling configuration. In addition, the orthogonal sampling position provided a higher selectivity by effect of ion sampling excluding larger droplets-with an increased momentum along the axis-which were drained through the sink at the bottom of the ion source. Also, the new configuration facilitated sample ionization, improved electrospray stability and led to stronger signals as a result. The new system was validated in terms of precision (repeatability), linearity, and limits of detection and quantification. A comparison of the validation data with the results previously obtained by using a commercial co-axial configuration revealed the adapted orthogonal sampling position to provide better repeatability in both migration times and relative peak areas (<1% and 7% respectively with n=15 replicates), a good linear range (with levels in the microgram-per-litre region) and lower limits of detection-especially for the compounds detected with the lowest sensitivity when co-axial ESI was used, as HFA, GEN, FER and VAN finding LOD among 24-3.0 microg L(-1) respectively., (Copyright 2010 Elsevier B.V. All rights reserved.)

A sensitive and expeditious CE-ESI-MS analytical method for the separation, identification and determination of seven selected antioxidants (cinnamic and benzoic acids), including three isomers of coumaric acid (ortho-, meta- and para-) has been developed. In order to obtain the analytical separation, capillary electrophoresis and CE-MS interface parameters (e.g., buffer pH and composition, sheath liquid and gas flow rates, sheath liquid composition, electrospray voltage, etc.) were carefully optimized. The polar fraction containing the selected phenolic acids was obtained using a previously optimized SPE pretreatment. An MS detector in order to extract structural information about the target compounds and facilitate their qualitative analysis was used in the negative ion mode. The proposed off-line SPE CE-ESI-MS method was validated by assessing its precision, LODs and LOQs, linearity range and accuracy. The optimized and validated method was used in order to quantify the selected antioxidants in various samples of virgin olive oil and extra-virgin olive oil obtained from the main olive varieties cropped in Castilla-La Mancha, Spain. Salicylic acid was used as internal standard throughout in order to ensure reproducibility in the quantitative analysis of the oil samples. The results confirmed the presence of hydroxyphenyl acetic, p-coumaric, ferulic and vanillic acids in substantial amounts (microg g(-1) level) in all samples.

An analytical method based on CZE to determine lansoprazole enantiomers in pharmaceuticals was developed. The primary factors affecting its separation efficiency, which include chiral selector, pH, buffer concentration, capillary temperature and injection time, were optimised. The best results were obtained by using a background electrolyte consisting of 50 mM phosphate adjusted to pH 2.2, 12 mM beta-CD and 5 mM sodium sulphite, in combination with hydrodynamic injection and a 15 kV separation voltage. Detection limits were calculated from baseline noise and found to be 0.64 mg L(-1) for the R enantiomer and 0.72 mg L(-1) for the S enantiomer. The proposed method was used to analyse three different pharmaceutical preparations with recoveries of 91-102% of the label content.

A simple, rapid and sensitive procedure using capillary zone electrophoresis (CZE) to measure methotrexate, folinic acid and folic acid in human urine has been developed and validated. Optimum separation of methotrexate, folinic acid and folic acid was obtained on a 60 cm x 75 microm capillary using a 15 mM phosphate buffer solution (pH 12.0), temperature and voltage 20 degrees C and 25 kV, respectively and hydrodynamic injection. Under these conditions the analysis takes approximately 9.0 min. Good results were obtained for different aspects including stability of the solutions, linearity, accuracy and precision. Before CZE determination, the urine samples were purified and enriched by means of a solid phase extraction step with a preconditioned C(18) cartridge and eluting the compound with a mixture 1:1 of methanol:water. A linear response over the urine concentration range 1.0-6.0 mgL(-1) for MTX and 0.5-6.0 mgL(-1) for folinic acid and folic acid was observed. Detection limits for the three compound in urine were 0.35 mgL(-1). CZE was shown to be a good method with regard to simplicity, satisfactory precision, and sensitivity.

A simple, rapid and sensitive procedure using nonaqueous capillary electrophoresis (NACE) to measure fluoxetine and its main metabolite norfluoxetine has been developed and validated. Optimum separation of fluoxetine and norfluoxetine, by measuring at 230nm, was obtained on a 60cm x 75mum capillary using a nonaqueous solution system of 7:3 methanol-acetonitrile containing 15mM ammonium acetate, capillary temperature and voltage 25 degrees C and 25kV, respectively and hydrodynamic injection. Paroxetine was used as internal standard. Good results were obtained for different aspects including stability of the solutions, linearity, and precision. Detection limits of 10mugL(-1) were obtained for fluoxetine and its metabolite. This method has been used to determine fluoxetine and it main metabolite at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of extraction-preconcentration step with a preconditioned C(18) cartridge and eluting the compounds with methanol.

Micellar electrokinetic capillary chromatography (MEKC) coupled with sample stacking and polarity switching was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320, UK) in human serum in the concentration range of clinical interest. Human serum samples spiked with SC and UK were eluted with methanol from a C18 cartridge, the extract was evaporated and regenerated in a solution that contained 1 mM phosphate buffer (pH 12.3) and 20% methanol. The MEKC separation was performed using an injection time of 275 s, a polarity switching time of 93 s, a phosphate buffer, (pH 12.3, 15 mM) containing 25 mM sodium dodecyl sulfate as separation electrolyte and a fused-silica capillary. The analysis takes about 6 min and gives satisfactory inter-day precision with respect to migration times and linear responses over the 80-900 ng/ml concentration range investigated for SC and UK. Intra-day RSDs (n=4 graphs) for the slopes of the calibration graphs were 4.86% for SC and 3.50% for UK. Inter-day RSDs for the slopes were 4.37% for SC and 5.39% for UK. Detection limits (S/N=3) were about 17 ng/ml for both compounds in human serum. A 1-ml volume of blood serum was necessary to do this determination.