Search

Abstract Nanotechnology is the art and science of dealing with nanoscale particles. This has transformed contemporary dental practices through myriad contributions to biomaterial science. Titanium dioxide nanoparticles procured from Bacillus subtilis, an eco-friendly and biogenic source, can significantly magnify the physiochemical attributes of dental materials. However, postoperative sensitivity is a major drawback of composite restorations. The incorporation of these nanoparticles into dental adhesives can greatly benefit clinical dentistry by resolving this issue. This trial aimed to evaluate the effectiveness of a novel titanium dioxide nanofortified adhesive on the postoperative sensitivity of composite restorations. Methods This triple-blind, parallel-group randomized controlled trial was conducted at the Department of Operative Dentistry and Endodontics, School of Dentistry, Islamabad, from May 15, 2023, to November 25, 2023. Participants (n = 60) with Class I and II primary carious lesions with a minimum cavity depth of 3–5 mm were randomly assigned to two groups (n = 30). After obtaining informed consent, the restorative procedure was accomplished using a minimally invasive approach and etch-and-rinse adhesive strategy. In group A, a nanofortified adhesive was used for composite restoration, whereas in group B, an adhesive without nanoparticles was used. Postoperative sensitivity was evaluated using the Visual Analog Scale (VAS) score at follow-up periods: of one day, one week, two weeks and one month. A Chi-square test was used to compare postoperative sensitivity between the two groups. The level of significance was set at p

Application of intracanal medicaments may affect the physical properties of root dentine. Calcium hydroxide (CH), a gold standard intracanal medicament, has proven to decrease root dentine microhardness. A natural extract, propolis, has been shown to be superior to CH in eradicating endodontic microbes, but its effect on the microhardness of root dentine is still not known. This investigation aims to evaluate the effect of propolis on root dentine microhardness compared to calcium hydroxide. Ninety root discs were randomly divided into three groups and treated with CH, propolis, and a control. A Vickers hardness indentation machine with a load of 200 g and dwell time of 15 s at 24 h, 3, and 7 days was used for microhardness testing. ANOVA and Tukey’s post hoc test were used for statistical analysis. A progressive decrease in microhardness values was observed in CH (p < 0.01), whereas a progressive increase was observed in the propolis group (p < 0.01). At 7 days, propolis demonstrated the highest microhardness value (64.43 ± 1.69), whereas CH demonstrated the lowest value (48.46 ± 1.60). The root dentine microhardness increased over time when propolis was applied, while it decreased over time after application of CH on root dentine sections.

Currently, titanium oxide (TiO2) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO2 NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO2 NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).

The ChAdOx1 nCoV-19 vector vaccine (Vaxzevria, AstraZeneca, Cambridge, UK) was developed at Oxford University and is considered safe for the administration in lactating mothers. Nevertheless, as a novel vaccine, there are gaps in the knowledge regarding possible adverse events in breastfeeding infants of vaccinated mothers. This case report provides first-time data on a possible delayed, cutaneous, adverse reaction in a breastfed, 16-month-old female infant after the first administration of the AstraZeneca vaccine to her 33-year-old mother. Even though, no clinical adverse effects were observed in the mother, her daughter had a 2-day rash in the lower extremities and face. The infant’s cutaneous rashes might be a coincidental event. However, all skin lesions were analogous to previous descriptions and photographs of dermatologic reactions, which resolved spontaneously with no medical intervention, in people who had been vaccinated with other COVID-19 vaccines. Our aim is that this short report contributes to the enhancement of parental awareness about the possibility of similar skin rashes in breastfed children when the mothers receive a vaccination and the importance of reporting those adverse reactions to the competent authorities.

Background and Objectives: This systematic review aimed to assess the literature focusing on the clinical management of traumatized teeth with Pulp Canal Obliteration (PCO) and propose an updated clinical decision-making algorithm. The present review follows the PRISMA guidelines and was registered on PROSPERO database (CRD42020200656). Materials and Methods: An electronic search strategy was performed in Pubmed, EBSCOhost and LILACS from inception to March 2021. Only anterior permanent teeth with PCO due to dental trauma were included. Regarding clinical approaches, only teeth managed with a “watchful waiting” approach, tooth bleaching or root canal treatment (RCT) were included. Quality assessment was performed using the JBI Critical Appraisal Tool for Case Reports. Results: Twenty case reports were selected, resulting in a total of 27 patients. The number of traumatized teeth diagnosed with PCO was 33. The “watchful waiting” approach was the most implemented clinical strategy. Discolored non-symptomatic PCO teeth were mostly managed with external bleaching. The prevalence of pulp necrosis (PN) was 36.4%. For teeth diagnosed with PN, non-surgical RCT was performed in 10 teeth and surgical RCT in one tooth. Guided endodontic technique was performed in six of those teeth. Conclusions: For discolored non-symptomatic PCO teeth, external bleaching is advocated and the RCT approach should not be implemented as a preventive intervention strategy. Symptomatic PCO teeth should follow regular endodontic treatment pathways. Clinical approach of teeth with PCO should follow a decision-making algorithm incorporating clinical and radiographic signs and patient-reported symptoms.

A proper bond between root canal filling materials and dentin surface is essential to resist dislodgement and guarantee long-term success. Blood exposure is likely to occur in various clinical situations in which calcium silicate-based materials are used; therefore, it is fundamental to render data concerning the influence of blood on bond strength. The present study aims to evaluate the effect of blood contamination on the push-out bond strength obtained with three different biomaterials to root canal dentin; Ninety extracted human mono-radicular permanent teeth were selected. The root canals were prepared with Gates Glidden burs until a diameter of 1.10 mm was achieved. Teeth were then randomly divided into six experimental groups (n = 15) according to the presence/absence of blood contamination and biomaterial used for root canal filling (ProRoot® MTA, BiodentineTM, and TotalFill® BC Putty). After one week, each root was sectioned in three segments (coronal, middle, and apical regions). Specimens were then submitted to push-out bond strength tests. Fracture pattern evaluation was performed. The significance level was set at 5%.; Blood contamination did not affect the push-out bond strength of any of the three tested calcium silicate-based cements (p > 0.05). Regardless of blood contamination, TotalFill showed statistically higher push-out bond strength when compared with Biodentine (p = 0.040) and MTA (p = 0.004). Biodentine exhibited higher bond strength than MTA (p = 0.043). Biomaterials’ comparison within each radicular segment revealed statistically superior bond strength of both Biodentine and TotalFill over MTA (p < 0.05) in the coronal segment. TotalFill presented higher push-out bond strength regarding the apical segment compared to Biodentine (p = 0.003). Fractures were mostly adhesive.; Overall results indicate TotalFill presents the highest push-out bond strength values, followed by Biodentine and, lastly, MTA. Blood contamination did not affect the dislodgement resistance. Biomaterials’ comparison within each radicular segment revealed both TotalFill and Biodentine as the preferable alternatives for application in the coronal region. TotalFill might be the biomaterial of choice for placement in the apical region.

The main purpose of this work was to analyze the stress distribution in premolars restored with indirect IPS Empress® CAD onlays or inlays. The three-dimensional geometry of a human first premolar was created using modeling software. The tooth fixation system was simulated through box geometry, comprising a cortical bone layer with 2 mm of thickness over a layer of trabecular bone with 15 mm of thickness. The tooth had the following approximated crown dimensions: 10.35 mm buccolingual length; 7.1 mm mesiodistal width; and 7.0 mm cervico-occlusal height. The mesio-occluso-distal (MOD) cavity preparations followed the suggestions available in the literature. The cement geometry was modified to include cohesive zone models (CZM) to perform the adhesive joint’s strength prediction. The loading body was created assuming contact between the food bolus and the tooth surface. Numerical solutions were obtained by performing static analysis and damage analysis using the finite element method. Von Mises stress values generated in the ceramic inlay restoration ranged from 1.39–181.47 MPa, which were on average 4.4% higher than those of the onlay ceramic restoration. The fracture strength of the onlay restoration was about 18% higher than that of the inlay restoration. The onlay design seems to contribute to higher homogenization of the adhesive resin cement strain and higher tooth structure protection.

Collagenated porcine-derived bone graft materials exhibit osteoconductive properties and the development of different formulations intends to enhance bone regeneration. This study aims to evaluate bone healing in a rabbit cancellous bone defect in response to grafting with different physicochemical forms of heterologous porcine bone. Twenty-six adult male New Zealand White rabbits received two critical size femoral bone defects per animal (n = 52), each randomly assigned to one of the five tested materials (Apatos, Gen-Os, mp3, Putty, and Gel 40). Animals were sacrificed at 15- and 30-days post-surgery. Qualitative and quantitative (new bone, particle and connective tissue percentages) histological analyses were performed. Histomorphometry showed statistically significant differences in all evaluated parameters between mp3 and both Putty and Gel 40 groups, regardless of the timepoint (p < 0.05). Moreover, statistical differences were observed between Apatos and both Putty (p = 0.014) and Gel 40 (p = 0.007) groups, at 30 days, in regard to particle percentage. Within each group, regarding new bone formation, mp3 showed significant differences (p = 0.028) between 15 (40.93 ± 3.49%) and 30 (52.49 ± 11.04%) days. Additionally, intragroup analysis concerning the percentage of particles revealed a significant reduction in particle occupied area from 15 to 30 days in mp3 and Gen-Os groups (p = 0.009). All mp3, Gen-Os and Apatos exhibited promising results in terms of new bone formation, thus presenting suitable alternatives to be used in bone regeneration.

Calcium silicate-based sealers were recently introduced as a new class of endodontic sealers, with potential further benefits due to their bioactivity. The aim of this study was to evaluate the biocompatibility of two new hydraulic calcium silicate-based sealers, TotalFill BC Sealer (FKG, La Chaux-des-Fonds, Switzerland) and TotalFill BC Sealer HiFlow (FKG, La Chaux-des-Fonds, Switzerland) through subcutaneous implantation in connective tissue of rats. Subcutaneous implantation was performed in 16 young Wistar rats. Four polyethylene tubes were implanted in each animal, one empty to serve as a control, and three filled with tested sealers: AH Plus as reference (Dentsply DeTrey, Konstanz, Germany), TotalFill BC Sealer (BC) and TotalFill BC Sealer HiFlow (HiFlow). Eight rats were euthanized at 8 days and the remaining eight at 30 days. Hematoxylin-eosin staining was used to score the inflammatory reaction, macrophage infiltrate and to measure the thickness of the fibrous capsule. von Kossa staining was performed to evaluate the mineralization level. Kruskal–Wallis test followed by Dunn’s post hoc test was used to analyze non-parametric data. To analyze the influence of the implantation time within each material, a Mann–Whitney U test was performed. At eight days post-implantation, AH Plus induced a more intense inflammatory reaction when compared both with the control (p ≤ 0.001) and BC (p ≤ 0.01). HiFlow presented a higher score of macrophage infiltrate than control (p ≤ 0.01) and BC (p ≤ 0.05). The fibrous capsule thickness in this period was significantly higher for the BC group when compared to control (p ≤ 0.01) and AH Plus (p ≤ 0.05). The mineralization potential was higher for the HiFlow group when compared with the control (p ≤ 0.001) and AH Plus (p ≤ 0.001). At 30 days post-implantation, the score for the inflammatory reaction remained higher for the AH Plus group when compared both to control (p ≤ 0.01) and BC (p ≤ 0.001). The macrophage infiltrate of the HiFlow was significantly higher than control (p ≤ 0.001) and AH Plus groups (p ≤ 0.01), additionally, the fibrous capsule of the BC (p ≤ 0.001) and HiFlow (p ≤ 0.01) groups were both thicker than control. Mineralization potential was observed only on BC (p ≤ 0.05) and HiFlow groups (p ≤ 0.001), when compared to control). BC exhibited the best biocompatibility performance of all tested sealers and HiFlow provided the greatest induction of mineralized tissues. Both TotalFill BC Sealer and TotalFill BC Sealer HiFlow are biocompatible and show potential bioactivity when implanted in the subcutaneous tissue. Bioactivity was not found in AH Plus.

Background and objectives: The long-term outcome of endodontic microsurgery (EMS) performed on root-filled teeth affected by post-treatment apical periodontitis (AP) has been a matter of debate, re-launched by the introduction of novel root-end filling materials which have been proven to improve the short-term outcome of EMS. The purpose of this systematic review and meta-analysis is to evaluate the clinical and radiographic long-term outcome of endodontic microsurgery in teeth diagnosed with secondary AP through radiographic evaluation. Materials and Methods: This systematic review and meta-analysis followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Inclusion and exclusion criteria were defined a priori to select the best longitudinal evidence. Only randomized clinical trials (RCT) and prospective clinical studies (PCS), with a follow-up ≥ 2-year, and exhibiting well-established clinical and radiographic outcome criteria, were selected. Results: A total of 573 articles were obtained, from which 10 fulfill inclusion criteria: 6 PCS and 4 RCT. Meta-analysis showed a pooled proportion of success rate of 91.3%, from an overall amount of 453 treated teeth included in RCT; from overall 839 included teeth in PCS, a pooled success rate of 78.4% was observed, with the follow-up time ranging from 2 to 13-years. Survival rate outcomes varied from 79 to 100% for the same follow-up period. Five prognostic factors with influence on the outcome were disclosed: smoking habits, tooth location and type, absence/presence of dentinal defects, interproximal bone level, and root-end filling material. Conclusions: High success rates and predictable results can be expected when EMS is performed by trained endodontists, allowing good prognosis and preservation of teeth affected by secondary AP.

The aim of this study is to compare root-end preparation performed with two different ultrasonic tips—CVDentus and NSK—and respective time requirements. After root-end resection, 32 teeth were randomly divided in two groups, according to the ultrasonic tip used for root-end preparation. Preparation time was recorded. Photomicrographs were taken to assess the following parameters: root surface microcracking, marginal integrity and presence of debris. One ultrasonic tip from each group was analyzed through scanning electron microscopy before and after root-end preparation. The significance level was set at α = 0.05. Incidence of microcracks in both groups was 12.5%. Solely intracanal microcracking was found, consistently positioned within the widest side of the remaining dentine. No statistically significant differences were verified between both experimental groups regarding marginal integrity (p = 0.102) and preparation time (p = 0.780), whereas statistical differences (p = 0.003) were found concerning the presence of debris (the minimum registered score was mostly verified in CVDentus group). NSK tips showed major morphological changes, with extensive surface wear and noticeable loss of particles, which was not verified on CVDentus tips. Our findings suggest significant differences regarding root-end preparation walls quality, with CVDentus tips showing better results. Concerning microcracking, as well as preparation time and marginal integrity, both ultrasonic tips showed similar results. Qualitative analysis exposed NSK tips major morphological changes and wear after use, which was not verified on CVDentus tips.

The aim of the present ex vivo study was to assess and compare coronal discoloration induced by four endodontic biomaterials used in regenerative endodontic procedures (REPs). Root resection was executed horizontally, 2 mm apical to the cementoenamel junction, in all fifty-four teeth. After accessing the pulp chamber, specimens were randomly divided in groups and filled with either saline solution or blood, followed by calcium silicate-based cements (CSCs) placement: ProRoot mineral trioxide aggregate (MTA) (Dentsply Sirona), Biodentine (Septodont), TotalFill BC (FKG), or pulp capping material (PCM) (Coltène). Color change (ΔE) was assessed using the L* a* b* system at five different timepoints (before and immediately after biomaterial application, 72 h, 7 days, and 6 months). The significance level for statistical analysis was set at p < 0.05. There are statistically significant differences regarding ΔE over time (p < 0.001). Statistical differences are found considering material (p < 0.001), treatment (p = 0.007), or both (p = 0.002). If solely the material or treatment is considered, regardless of time, statistically significant differences are detected (p < 0.001). After a six-month period of evaluation, blood exposure might be a critical factor in biomaterials’ color variation. Biodentine presents the lowest discoloration potential, followed by TotalFill and PCM, albeit without statistically significant differences. MTA exhibited the greatest color variation. The selection of biomaterial should consider the material’s discoloration potential.

Regenerative endodontic procedures (REPs) have emerged as a treatment option for immature necrotic teeth to allow the reestablishment of a newly formed vital tissue and enable continued root development. The apical papilla stem cells (SCAPs) play an important role in physiologic root development and may also contribute to further root development during REPs. The goal of these case reports is to show evidence of the apical papilla survival and development, in human teeth with apical periodontitis, after REPs, with 5-year clinical and radiographic follow-up. In the first case, an 11-year-old girl with acute apical abscess of tooth 15 was referred for a REP. Treatment was performed with an intracanal medication followed by induction of a blood clot and a Mineral Trioxide Aggregate (MTA) cervical barrier. The 5-year follow-up showed an appreciable increase in root length as well as root canal thickness. In case 2, a 16-year-old girl was referred for endodontic treatment of tooth 21. The parents of the patient recalled a previous dental trauma (no specified on the patient records) on tooth 21 at age 7. The dental history reports a previous endodontic treatment failure and presence of a long-standing sinus tract. A mineralized tissue beyond the root apical portion could be seen at the preoperative X-ray. Nonsurgical root canal retreatment with an apical barrier was suggested as the treatment plan and accepted by the patient. After 2 weeks, the patient was recalled for a follow-up appointment presenting spontaneous pain, swelling, and sinus tract. Apical surgery was performed. Histopathological assessment of the apical root fragment collected showed the presence of dentin, cementum and pulp tissue, including odontoblasts. The 5-year follow-up depicted complete apical healing. The present case reports support survival and continued potential differentiation of the apical papilla after endodontic infection.

Apical periodontitis is a biofilm-mediated disease; therefore, an antimicrobial approach is essential to cure or prevent its development. In the quest for efficient strategies to achieve this objective, antimicrobial photodynamic therapy (aPDT) has emerged as an alternative to classical endodontic irrigation solutions and antibiotics. The aim of the present critical review is to summarize the available evidence on photosensitizers (PSs) which has been confirmed in numerous studies from diverse areas combined with several antimicrobial strategies, as well as emerging options in order to optimize their properties and effects that might be translational and useful in the near future in basic endodontic research. Published data notably support the need for continuing the search for an ideal endodontic photosensitizer, that is, one which acts as an excellent antimicrobial agent without causing toxicity to the human host cells or presenting the risk of tooth discoloration. The current literature on experimental studies mainly relies on assessment of mixed disinfection protocols, combining approaches which are already available with aPDT as an adjunct therapy. In this review, several approaches concerning aPDT efficiency are appraised, such as the use of bacteriophages, biopolymers, drug and light delivery systems, efflux pump inhibitors, negative pressure systems, and peptides. The authors also analyzed their combination with other approaches for aPDT improvement, such as sonodynamic therapy. All of the aforementioned techniques have already been tested, and we highlight the biological challenges of each formulation, predicting that the collected information may encourage the development of other effective photoactive materials, in addition to being useful in endodontic basic research. Moreover, special attention is dedicated to studies on detailed conditions, aPDT features with a focus on PS enhancer strategies, and the respective final antimicrobial outcomes. From all the mentioned approaches, the two which are most widely discussed and which show the most promising outcomes for endodontic purposes are drug delivery systems (with strong development in nanoparticles) and PS solubilizers.

Aim: The purpose of the present study is to assess the color stability of two calcium silicate-based cements (CSCs) used in regenerative endodontic procedures (REPs). Methods: A total of 40 acrylic single-rooted transparent teeth, with immature apex, were used. Root canals were filled up to 3 mm below the level of the cementoenamel junction, with either saline solution (Mineral Trioxide Aggregate (MTA)/saline and Biodentine/saline) or blood (MTA/blood and Biodentine/blood). Subsequently, ProRoot MTA® or BiodentineTM was placed in the root canal to create a cervical barrier. Color measurement was carried out at four different evaluation periods (3 h, 72 h, 7 days, and 6 months). Shade analysis within the L* a* b* color space was performed and color variation (∆E) calculated. The significance level for statistical analysis was set at p < 0.05. Results: The four groups showed a significant decrease in L* values over time. The ΔE value increased over time for all groups but was not statistically significant for the Biodentine/blood group. Two-way ANOVA showed no interaction between the CSC and treatment (contact with saline solution or blood). CSC used was the factor responsible for ΔE over time, inducing statistically significant color variations from T3H to T7D (p = 0.04) and T3H to T6M (p < 0.01). After 6 months, MTA/saline had 5.08 (p = 0.001) higher ΔE than Biodentine/Saline and the MTA/blood had 3.65 (p = 0.009) higher than Biodentine/blood. Conclusions: After 6 months, regardless of blood exposure, Biodentine exhibits superior color stability compared to MTA. Biodentine might be a suitable alternative to MTA as a cervical barrier material in REPs.

Background: The development of materials with bioregenerative properties is critically important for vital pulp therapies and regenerative endodontic procedures. The aim of this study was to evaluate the cytocompatibility and cytotoxicity of a new endodontic biomaterial, PulpGuard, in comparison with two other biomaterials widely used in endodontic procedures, ProRoot Mineral Trioxide Aggregate (MTA) and Biodentine. Methods: Apical papilla cells (APCs) were isolated from third molars with incomplete rhizogenesis from patients with orthodontic indication for dental extraction. Cultured APCs were incubated for 24, 48, or 72 h with different dilutions of eluates prepared from the three materials. Cellular viability, mobility, and proliferation were assessed in vitro using the Alamar Blue assay and a wound-healing test. The cells were also cultured in direct contact with the surface of each material. These were then analyzed via Scanning Electron Microscopy (SEM), and the surface chemical composition was determined by Energy-Dispersive Spectroscopy (EDS). Results: Cells incubated in the presence of eluates extracted from ProRoot MTA and PulpGuard presented rates of viability comparable to those of control cells; in contrast, undiluted Biodentine eluates induced a significant reduction of cellular viability. The wound-healing assay revealed that eluates from ProRoot MTA and PulpGuard allowed for unhindered cellular migration and proliferation. Cellular adhesion was observed on the surface of all materials tested. Consistent with their disclosed composition, EDS analysis found high relative abundance of calcium in Biodentine and ProRoot MTA and high abundance of silicon in PulpGuard. Significant amounts of zinc and calcium were also present in PulpGuard discs. Concerning solubility, Biodentine and ProRoot MTA presented mild weight loss after eluate extraction, while PulpGuard discs showed significant water uptake. Conclusions: PulpGuard displayed a good in vitro cytocompatibility profile and did not significantly affect the proliferation and migration rates of APCs. Cells cultured in the presence of PulpGuard eluates displayed a similar profile to those cultured with eluates from the widely used endodontic cement ProRoot MTA.

The purpose of the present study was to assess the proper time to perform a restoration (immediately or delayed) after placement of two calcium silicate-based cements (CSCs) and to test the performance of two different restorative protocols regarding shear bond strength (SBS). Seventy-five acrylic blocks were randomly divided into five groups (n = 15). Specimens were filled with either ProRoot MTA (Dentsply Tulsa Dental) or Biodentine (Septodont). The restoration was performed at an immediate (12 min) or delayed (seven days) timeframe, using a resin-based flowable composite (SDR) (bonded to the CSC using a universal bonding system) or glass ionomer cement (GIC) as restorative materials. SBS was measured using a universal testing machine. Fractured surfaces were evaluated, and the pattern was registered. Statistical analysis was performed using the Dunn⁻Sidak post hoc test (P < 0.05). Biodentine/immediate SDR showed the highest mean SBS value (4.44 MPa), with statistically significant differences when compared to mineral trioxide aggregate (MTA)/GIC (1.14 MPa) and MTA/immediate SDR (1.33 MPa). MTA/GIC and MTA/immediate SDR did not present significant differences regarding SBS. No statistical differences were verified concerning mean SBS between both CSCs within the 7 day groups. MTA/delayed SDR (3.86 MPa) presented statistical differences compared to MTA/immediate SDR, whereas no differences were observed regarding Biodentine performance (Biodentine/immediate SDR and Biodentine/delayed SDR (3.09 MPa)). Bonding procedures directly on top of MTA might be preferably performed at a delayed timeframe, whereas Biodentine might allow for immediate restoration.