Search

The National Institute of Standards and Technology (NIST, formerly the National Bureau of Standards) has developed and certified a Standard Reference Material, SRM 2381, for use in testing for bias in determinations of morphine and codeine in human urine. Each unit of this SRM consists of three vials with different levels of morphine and codeine in lyophilized urine. Three different analytical methods, employing GC/MS, LC/MS, and MS/MS, were used to certify the concentrations of each analyte. Results from the three methods were in good agreement and, therefore, were statistically combined to yield certified values of 138, 293, and 578 ng/mL for morphine and 134, 283, and 591 for codeine. A round-robin study on this material among nine military laboratories demonstrated the suitability of the SRM for its intended purpose.

Three interlaboratory round-robin studies (RR1, RR2, and RR3) were conducted to identify a serum-based reference material that would aid in the standardization of direct ion-selective electrode (ISE) measurements of sodium and potassium. Ultrafiltered frozen serum reference materials requiring no reconstitution reduced between-laboratory variability (the largest source of imprecision) more than did other reference materials. ISE values for RR3 were normalized by the use of two points at the extremes of the clinical range for sodium (i.e., 120 and 160 mmol/L), with values assigned by the flame atomic emission spectrometry (FAES) Reference Method. This FAES normalization of ISE raw values remarkably improved all sources of variability and unified the results from seven different direct ISE analyzers to the FAES Reference Method value. Subsequently, a three-tiered, fresh-frozen human serum reference material was produced to the specifications developed in RR1-RR3, was assigned certified values for sodium and potassium by Definitive Methods at the National Institute of Standards and Technology (NIST), and was made available in 1990 to the clinical laboratory community as a Standard Reference Material (SRM); it is now identified as SRM 956. Albeit retrospectively, we show how applying an FAES normalization step identical to that used in RR4/5 to the ISE data for SRM 956 after the NIST Definitive Method values were known, consistently moved the ISE results for RR3 closer to the true value for Na+ and K+.

In response to the scheduled destruction of U.S. military stockpiles of the hallucinogenic agent 3-quinuclidinyl benzilate (QNB), a specific confirmatory test for human exposure to QNB was developed. The amount of the parent compound in the urine as well as the two major metabolites, 3-quinuclidinol (Q) and benzilic acid (BA), was determined because the relationship between QNB dose and levels of QNB and its metabolites in human urine is not known. QNB was determined in urine samples spiked at a target level of 0.5 ng/mL, and the metabolites BA and Q were determined at a target level of 5 ng/mL. The method uses solid-phase extraction to isolate each analyte from the urine and isotope dilution gas chromatography/mass spectrometry for quantitation. Each analyte is converted to its trimethylsilyl derivative for analysis. The analytical method was tested on eight different urine samples spiked with known amounts of the analytes near the target levels, at 10 times the target levels, and blank (unspiked) urine samples. The variabilities in the method are for the most part evenly distributed between three imprecision categories: GC/MS measurement, sample preparation, and the urine samples. The total imprecision (1 standard deviation) of a single measurement is about 15% of the value for each analyte.

The concentrations of cocaine and benzoylecgonine (BE) in Standard Reference Material (SRM) 1508, cocaine and metabolites in freeze-dried human urine, were determined at the National Institute of Standards and Technology (NIST, formerly NBS) by two independent methods. For cocaine, one method was based on gas chromatography/mass spectrometry (GC/MS); the other was based on high-performance liquid chromatography (HPLC). For BE, one method was based on GC/MS; the other was based on flow injection analysis/thermospray mass spectrometry (FIA/MS). The results for each pair of methods were statistically evaluated. Concentrations were determined in the SRM for three levels of cocaine and three levels of benzoylecgonine. Methylecgonine, although present in the material, was not determined. For cocaine, the concentrations were 90, 263, and 429 ng/mL of human urine. For BE, the concentrations were 103, 259, and 510 ng/mL of human urine.

We describe a rapid method for accurately and precisely measuring ascorbic acid and dehydroascorbic acid in plasma. Total analysis time is less than 10 min, replicate analyses of a single pool provide precision less than or equal to 2%, and values measured in supplemented samples agree with known concentrations of 4.68 and 11.83 mg/L. The stability and homogeneity of lyophilized plasma samples supplemented with ascorbic acid and dithiothreitol are documented. We also describe a procedure in which metaphosphoric acid (50 g/L) is used to prepare a reference material for the measurement of ascorbic acid and dehydroascorbic acid. The procedure for both acids consists of first measuring the native ascorbic acid, then reducing the dehydroascorbic acid, at neutral pH, with dithiothreitol, and finally measuring the total ascorbic acid; dehydroascorbic acid is then determined by difference. The metaphosphoric-acid-treated samples were stable at -70 degrees C, but stability decreased with temperature over the range examined, 4-50 degrees C.

Three laboratories in the U.S. and two in the Netherlands determined molar absorptivities (epsilon) of Standard Reference Material (SRM) 916a Bilirubin from the National Institute of Standards and Technology. In caffeine reagent the average epsilon values were 50,060 and 48, 980 L.mol-1.cm-1 at 432 and 457 nm, respectively. The epsilon value of the blue azopigment, obtained with the Reference Method for total serum bilirubin, was 76,490 L.mol-1.cm-1 at 598 nm. When the addition of alkaline tartrate was omitted, the molar absorptivity of the red azopigment was 56,600 L.mol-1.cm-1 at 530 nm.

A straightforward explanation of the statistical technique of ruggedness testing is presented. Efficient Plackett-Burman designs are used in ruggedness tests. These designs involve the simultaneous change of levels of a number of variables. The designs allow the ruggedness test user to determine the effect of the separated variables on the measurement process. This paper (Part I) deals with the common situation where two-factor and higher order interactions can be safely ignored. A method is presented for evaluating the experimental uncertainties. A detailed example of glass electrode measurements of pH of dilute HCl solutions is used to illustrate ruggedness testing procedures.

Isotope dilution/mass spectrometric methods for total serum cholesterol, developed separately at the Karolinska Institutet (KI) and the National Bureau of Standards (NBS), were compared by applying them to a common set of serum pools. A search for the cause of a systematic difference of a few percent in results from the two methods revealed that the KI cholesterol standard contained lathosterol, which interfered with the calibration of the method. With NBS Standard Reference Material cholesterol used for new analyses at the KI, the average difference in mean values dropped to 0.2%. The NBS results are more precise. This is attributed to the protocols NBS used for sample preparation and mass spectrometry. However, these protocols make the NBS method more complex and time-consuming. A recent critical article on the use of this technique for total cholesterol is also examined.

A method is presented for the statistical analysis of sets of data which are assembled from multiple experiments. The analysis recognizes the existence of both within group and between group variabilities, and calculates appropriate weighting factors based on the observed variability for each group. The weighting factors are used to calculate a "best" consensus value from the overall experiment. The technique for obtaining the consensus value is applicable to either the determination of the weighted average value, or to the parameters associated with a weighted least squares regression problem. The calculations are made by using an iterative technique with a truncated Taylor series expansion. The calculations are straightforward, and are easily programmed on a desktop computer. An examination of the observed variabilities, both within groups and between groups, leads to considerable insight into the overall experiment and greatly aids in the design of future experiments.

This paper describes the development of Standard Reference Material, SRM 2694, "Simulated Rainwater," intended to aid in the analysis of acidic rainfall. Details of the formulation and preparation of the two levels of solutions (2694-I and 2694-II) are given. The 10 analytical techniques used to measure the 12 components in the solutions are described in brief. The data used in the statistical evaluation of the results are summarized and the recommended values for pH, specific conductance, acidity, fluoride, chloride, nitrate, sulfate, sodium, potassium, ammonium, calcium, and magnesium are tabulated. The instability of ammonium ion in acidic solutions is discussed. Recommendations for the use of SRM 2694, particularly with regard to the measurement of pH, are given.

An extension to the theory of consensus values is presented. Consensus values are calculated from averages obtained from different sources of measurement. Each source may have its own variability. For each average a weighting factor is calculated, consisting of contributions from both the within- and the between-source variability. An iteration procedure is used and calculational details are presented. An outline of a proof for the convergence of the procedure is given. Consensus values are described for both the case of the weighted average and the weighted regression.

This paper is a continuation of the preceding article which introduced the reader to the general concepts of ruggedness testing. The current paper describes the effects of interactions on the measurement process, and presents procedures for the separation of the main effects from the two-factor interactions. The general characteristics of interactions are described in some detail. A short-cut procedure is presented for the calculations. A number of examples of glass electrode measurements of pH of dilute acid solutions are used to illustrate ruggedness testing procedures.

We carried out a statistically designed, multilaboratory study to evaluate a flame atomic emission spectroscopic (FAES) method for serum sodium as a Reference Method. definitive values for the serum pools for the study, with sodium in the 110-160 mmol/L range, were determined at the National Bureau of Standards by an ion-exchange/gravimetry method. The multilaboratory FAES results were judged against the preselected performance criteria for the Reference Method: maximum imprecision 1.5 mmol/L, maximum bias 2.0 mmol/L. The standard error of a single laboratory's performance of the method varied with concentration from 0.46 to 0.86 mmol/L with a maximum bias of 1.0 mmol/L; thus, the criteria were satisfied. The cooperating laboratories performed the method with either manual or semi-automated pipetting. Although both modes of pipetting satisfied our acceptability criteria, only the method with semi-automated pipetting is described here as the Reference Method. The statistical results indicate that the precision criterion can be fulfilled with fewer than four replicate analyses.

Throug the use of the statistical technic known as the linear model, a complete analysis has been made of data obtained in the Colleg of American Pathologists Survey of 1975 for calcium, potassium, and blood urea nitrogen (BUN). The analysis allows a separation of laboratories into core and non-core categories. It also allows for determination of the reproducibility of each analytic technic involved in this survey. For Ca and K, the results obtained by each analytic method were compared with the results obtained by the National Bureau of Standards through use of the definitive method. For BUN, the comparison was made with the average of values for all laboratories and all methods.

Ruggedness Test (RT) experiments were performed to assess the significance of the various main factors which affect pH measurements in low ionic strength aqueous solutions, as well as to establish the presence of interactions between the main factors. Stirring has an adverse effect on the measurement of pH, since it not only increases the random noise but also biases the measured value. Temperature control to the nearest 0.5 °C is sufficient for maintaining measurements accurate to 0.01 pH. Addition of NaNO 3 or KCl can not be tolerated in accurate pH measurements. Three small two-factor interactions were also revealed.

We describe a highly accurate and precise method for determination of total cholesterol in serum by isotope dilution/mass spectrometry. The method was developed for a Study Group of the Committee on Standards of the American Association for Clinical Chemistry, for use in establishing the accuracy of a candidate reference method for total cholesterol, and fulfills their criteria for a definitive method. Cholesterol-d7 is added to serum, with the weight ratio of cholesterol-d7 to total serum cholesterol kept near to 1:1. The esters are hydrolyzed and the cholesterol is separated and converted into the trimethylsilyl ether derivative for measurement by combined gas chromatography/mass spectrometry. The intensity ratio of the molecular ions at m/z 465 and 458 is measured for each sample and for two calibration mixtures, according to a prescribed bracketing protocol. A weight ratio for the sample is obtained by linear interpolation of the ion-intensity ratios, and the total cholesterol is then calculated. The method was applied four times over several weeks to each of five serum pools. Statistical analysis involving consideration of both replication error and variability between weeks gave a coefficient of variation for a single measurement of 0.36%. The absence of interferences in the method was demonstrated by measurements at several other masses.

An interlaboratory test of pH measurements in rainwater has been conducted. Various types of electrodes and junction materials were used in this test. The results of this exercise verify that there are significant differences in the pH values of low ionic strength solutions reported by various laboratories. Other work suggests that these differences are due to residual liquid junction potentials. Furthermore, this test confirms the efficacy of using dilute solutions of a strong acid as working standards for pH measurements in acid deposition studies.