Search

Background: A rotator cuff tear (RCT) is a common shoulder diagnosis and its etiology may be acute, traumatic, or chronic degenerative. Differentiation between the 2 etiologies may be important for multiple reasons, but remains difficult based on imaging. Further knowledge about radiographic and magnetic resonance findings to distinguish traumatic from degenerative RCT is needed. Methods: We analyzed magnetic resonance arthrograms (MRAs) of 96 patients with traumatic or degenerative superior RCT, which were matched according their age and the affected rotator cuff muscle into the 2 groups. Patients older than 66 years of age were excluded from the study to avoid including cases with pre-existing degeneration. In the case of traumatic RCT, the time between the trauma and MRA had to be less than 3 months. Various parameters of the supraspinatus (SSP) muscle-tendon unit were assessed (tendon thickness, presence of a remaining tendon stump at the greater tubercle, magnitude of retraction, layer appearance). The retraction of the 2 SSP layers were individually measured to determine the difference of retraction. Additionally, edema of the tendon and muscle, the tangent- and kinking-sign as well as the newly introduced Cobra-sign (bulging of the distal part of the ruptured tendon with slim configuration of the medial part of the tendon) were analyzed. Results: Edema within the SSP muscle (sensitivity 13%, specificity 100%, P = .011) or the tendon (sensitivity 86%, specificity 36%, P = .014) are more frequent in traumatic RCT. The same association was found for the kinking-sign (sensitivity 53%, specificity 71%, P = .018) and the Cobra sign (sensitivity 47%, specificity 84%, P = .001). Even though not statistically significant, tendencies were observed toward thicker tendon stumps in traumatic RCT, and greater difference in retraction between the 2 SSP layers in the degenerative group. The cohorts had no difference in the presence of a tendon stump at the greater tuberosity. Conclusion: Muscle and tendon edema, as well as tendon kinking appearance and the newly introduced cobra-sign are suitable MRA parameters to distinguish between traumatic and degenerative etiology of a superior RTC.

Background: The need for coracoclavicular (CC) stabilization in the fixation of fractures with CC instability (Neer type IIB and V) was biomechanically demonstrated by higher construct strength than isolated locking plate osteosynthesis. It was the purpose of this study to prove noninferiority of the new cow-hitch suture repair technique compared with the well-established suture tape double-button fixation with regard to overall fixation strength and cyclic loading properties. Methods: Twelve human cadaver shoulders (7 right and 5 left) were matched for sex and age (mean age: 75 ± 5 years). An oblique parasagittal fracture line 20 mm medial to the acromioclavicular joint line was created, and the CC ligaments were dissected. Six shoulders were reconstructed by a double FiberTape fixation with two suture buttons (group DB), and the remaining six shoulders by a cow-hitch suture repair using a double FiberWire with only coracoid button fixation (group CH). Both reconstruction techniques were tested in a servo-hydraulic material testing machine for cyclic displacement (mm), stiffness (N/mm), and maximum load-to-failure (N) after 500 cycles at 3 mm/s and inferosuperior load between 15 and 70 N. Superior fragment displacement in space was recorded using a MicroScribe digitizer. Results: There were no statistically significant differences regarding cyclic displacement (group DB: 0.7 mm; group CH: 1.3 mm; P = .36), stiffness (group DB: 177 N/mm; group CH: 116 N/mm; P = .17), maximum load-to-failure (group DB: 560 N; group CH: 492 N; P = .59), and superior displacement in space of the medial fragment (group DB: 3.2 mm; group CH: 1.6 mm; P = .48). Conclusion: Fixation of unstable distal clavicle fractures using a double FiberWire cow-hitch suture repair with isolated coracoid button fixation for stand-alone CC stabilization resulted in similar biomechanical properties to a double-suture button fixation with FiberTapes while avoiding prominent clavicular implants.

Background: The treatment of complex proximal humerus fractures with hemiarthroplasty is associated with a high failure rate due to secondary displacement of the tuberosities. It was the aim of this in-vitro study to compare the mechanical stability of tuberosity reattachment obtained with the so-called “Cow-Hitch” (CH) cerclage compared with conventional tuberosity reattachment. Methods: A 4-part proximal humerus fracture was created in 10 fresh-frozen, human cadaveric shoulders. The greater and lesser tuberosity were reattached to the hemiarthroplasty stem with in total 4 CH Cerclages in the Cow-Hitch group. The conventional technique—recommended for the tested implant—was used in the control group using 6 sutures. A total of 5000 loading cycles with forces of 350N were applied, while motion (in mm) of the tuberosities was recorded in 3 directions (anteroposterior = AP, mediolateral = ML, inferosuperior = IS) with a telecentric camera. Results: After 5000 loading cycles, the CH group showed less fragment displacement (AP: 2.3 ± 2.3 mm, ML: 1.8 ± 0.9 mm, IS: 1.3 ± 0.5 mm) than the conventional group (AP: 9.8 ± 12.3 mm, ML: 5.5 ± 5.6 mm, IS: 4.5 ± 4.7 mm). The differences were not statistically significant (AP: P = .241; ML: P = .159; IS: P = .216). The lesser tuberosity fragment displacement in the CH group after 5000 cycles was less in the AP (2.3 ± 3.3 vs. 4.0 ± 2.8, P = .359) and IS (1.9 ± 1.2 vs. 3.1 ± 1.8; P = .189) directions but higher in the ML direction (7.2 ± 5.7 vs 6.3 ± 3.6, P = .963). Conclusions: In-vitro, “Cow-Hitch” cerclage results in mean greater tuberosity displacements of 2 mm and reliably prevents displacements greater than 5 mm. In contrast, the conventional fixation technique yields unreliable, variable stability with low to complete displacement upon cyclical loading.

Background: Functional internal rotation (fIR) of the shoulder is frequently limited after reverse shoulder arthroplasty (RTSA). The objective of this study was to study a cohort of satisfied patients after RTSA who had comparable active mobility except for fIR and to identify factors associated with selective loss of fIR. Methods: A retrospective cohort study was conducted to compare 2 patient groups with either poor (≤ 2 points in the Constant-Murley score [CS]) or excellent (≥8 points in CS) fIR after RTSA at a minimum follow-up of 2 years. Influencing factors (demographic, surgical or implant related, radiographic parameters) and clinical outcome were analyzed. Results: Fifty-two patients with a mean age of 72.8 (±9.3) and a mean follow-up of 41 months were included in the IR≤2 group and 63 patients with a mean age of 72.1 (±8.0) and a mean follow-up of 59 months in the IR≥8 group. All patients had undergone RTSA with the same implant type and only 2 different glenosphere sizes (36 and 40) for comparable indications. A multivariate analysis identified the following significant risk factors for poor postoperative fIR: poor preoperative fIR (pts in CS: 3 [range: 2-6] vs. 6 [range: 4-8], P

Category: Bunion Introduction/Purpose: In hallux valgus deformity less weight can be borne by the first ray which may lead to transfer metatarsalgia and lesser toe deformities. Depending on the exact configuration of the bone cuts during the scarf procedure, an iatrogenic shortening of the first metatarsal may occur which may diminish weightbearing ability of the first ray as well, causing transfer metatarsalgia. The aim of the present study was therefore to determine preoperative and postoperative changes in length of the first metatarsal by using different methods of measuring metatarsal length. Methods: A consecutive series of 118 feet in 106 patients (89% female, 11% male) was enrolled, who underwent correctional osteotomy (Scarf-with/without Akin-Osteotomy) from May 2015 to July 2017 at a single institution. Patients, who underwent additional shortening osteotomy of the metatarsals, were excluded. Average age at the time of surgery was 51 years (range, 14 to 83 years). Pre- and postoperative angle measurement of hallux valgus- and intermetatarsal angle was assessed at between six weeks and three months postoperatively on standardized weight-bearing radiographs in dorsoplantar plane. We also identified early complications in hallux valgus surgery. An assessment and comparison of different methods of measuring metatarsal length (length of first metatarsal, ratio first to second metatarsal, Coughlin method) postoperatively was performed to identify the amount of shortening with this technique. Results: Hallux valgus angle was statistically significant reduced by an average of 18.6° (28.3° preoperatively to 9.7° postoperatively, p < 0.001), intermetatarsal angle by 7.7° (12.8° to 5.1°, p < 0.001). Measuring the length of the first metatarsal, in all three methods a statistically significant reduction of the first metatarsal length could be detected. Mean absolute shortening of 1.8 mm was measured (p < 0.001). The ratio of the first metatarsal to the second metatarsal averaged -0.03 (p = 0.02). The mean relative lengthening of the second metatarsal, using the method described by Coughlin, was 0.42 mm (from 4.51 to 4.89 mm, p < 0.001) on average. Of those three methods, the Coughlin method showed the highest correlation. 6 minor complications were observed (5%). Conclusion: In the current study we could demonstrate a significant reduction of hallux valgus angle and intermetatarsal angle with hallux valgus correction using Scarf-/Akin-Osteotomy, with a low complication rate. However, statistically significant shortening of the first metatarsal could be detected as well. Further research is required to improve and establish a hallux valgus correction technique without shortening of the first metatarsal.