Search

In this study, we developed a hydrogel from cross-linked keratin and chitosan (KC) to remove patulin (PAT) from apple juice. We explored the potential of incorporating Lactobacillus rhamnoses into the KC hydrogel (KC-LR) and tested its effectiveness in removing PAT from simulated juice solutions and real apple juice. The KC hydrogel was developed through a dynamic disulfide cross-linking reaction. This cross-linked hydrogel network provided excellent stability for the probiotic cells, achieving 99.9 % immobilization efficiency. In simulated juice with 25 mg/L PAT, the KC and KC-LR hydrogels showed removal efficiencies of 85.2 % and 97.68 %, respectively, using 15 mg mL -1 of the prepared hydrogel at a temperature of 25 °C for 6 h. The KC and KC-LR hydrogels achieved 76.3 % and 83.6 % removal efficiencies in real apple juice systems, respectively. Notably, the encapsulated probiotics did not negatively impact the juice quality and demonstrated reusability for up to five cycles of the PAT removal process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Patulin (PAT) is a hazardous mycotoxin frequently occurs in fruit industry. A reusable g-C 3 N 4 -SH@KG composite aerogel for PAT removal in a novel "dark adsorption-light regeneration" mode was prepared by thiol(-SH) functionalization and konjac glucomannan (KG) immobilization. The g-C 3 N 4 -SH@KG was characterized by SEM, FT-IR, XPS and UV-Vis DRS, and its PAT adsorption and photocatalytic regeneration behaviors and mechanisms were investigated. The g-C 3 N 4 -SH@KG exhibited good regeneration performance, maintaining 83% of PAT initial adsorption capacity (0.92 mg/g) after 5 "adsorption-regeneration" cycles. The adsorption process was endothermic and spontaneous. •OH and h + generated by photocatalysis were the main substances that degraded PAT into two products and regenerated -SH. The g-C 3 N 4 -SH@KG could effectively remove PAT without negative impact on juice quality. The study provided a new strategy for the regeneration of thiol-functionalized PAT adsorbents, and a new idea for the application of non-selective photocatalysis in the control of food contaminations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

In this paper, a green and inexpensive air-assisted natural deep eutectic solvent-based solidified homogeneous liquid phase microextraction procedure was optimized for extraction of patulin in fruit juice and dried fruit samples using experimental design prior to its spectrophotometric determination. Four different natural deep eutectic solvent were prepared and applied to ensure efficient, and selective extraction of patulin. The significant variables including Zn(II) amount, cooling time, pH and amount of natural deep eutectic solvent were optimized by using central composite design. Under optimized conditions, working range was 10-750 μg L -1 with 0.9996 of correlation coefficient. Detection limit and preconcentration factor were 3.5 μg L -1 and 150, respectively. The repeatability and reproducibility precision were in the range of 3.2-4.6% and 4.3-5.6% respectively. Recoveries ranging from 94% to 104% proved the accuracy of the method. The optimized method was successfully applied to the extraction and identification of patulin in the selected samples., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Biodegradation based on microbial enzymes is considered to be one of the promising ways for controlling patulin contamination. However, few patulin degrading enzymes have been isolated and characterized until now. Here, a short-chain dehydrogenase/reductase (SDR) gene, CgSDR, was cloned from a yeast strain Candida guilliermondii, and expressed in Escherichia coli. The expression of CgSDR conferred a strong patulin tolerance and degradation ability to E. coli, and purified CgSDR could transform patulin into E-ascladiol in vitro with NADPH as a coenzyme. Moreover, addition of CgSDR at 150 μg/mL could reduce 80% of patulin in apple juice and the biodegradation process did not affect the quality of the apple juice. A molecular docking analysis and site-directed mutagenesis indicated that CgSDR might interact with patulin via VAL188 as an active binding sites. The findings provide new insights for developing enzymic formulations for mycotoxin detoxification in fruit derived products., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: Patulin is a mycotoxin that mainly contaminates apple juice, which is a typical high sugar matrix. Many different adsorbents have been utilized to develop a sample pretreatment method to minimize the matrix interference from apple juice., Results: A simple and reliable extraction method for the determination of patulin in apple juice has been developed. The sample preparation involves a simple one-step cleanup procedure using amine-functionalized polymeric solid-phase extraction cartridges (Retain AX) that effectively remove interferences and facilitate the quantification. Isotope dilution liquid chromatography tandem mass spectrometry (ID-LC-MS/MS) was employed to minimize the matrix effect and ensure reliable results. The limit of detection was as low as 0.2 μg kg -1 , which was satisfactory with regard to current European, US, and Chinese legislation. Matrix-matched linearity (r 2 = 0.9997) was established in the range of 1-400 μg kg -1 . Recovery was performed in samples spiked at three levels, and results were between 97.2% and 100.2%., Conclusion: The results indicated that, with one-step cleanup, the matrix effect was negligible and sensitivity was satisfactory. Our work provided a simple and reliable method for patulin detection in apple juice and is also very promising in routine quality control. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Patulin (PAT) contaminant causes severe food safety issue throughout apple industry. Although adsorption is the feasible approach to remove PAT, the limited adsorption capacity and separation difficulty of most adsorbent is the major drawback that remains to be overcome. Here GO-SH doped aerogel was prepared and used for removal PAT from apple juice. The intrinsic porous of the aerogel and abundant active sites including -COOH, -NH 2 and -SH offered the PAT adsorption capacity of 24.75 μg/mg that superior to most reported adsorbents. Furthermore, it could reduce 89 ± 1.23% PAT in real apple juice without juice quality deterioration and cytotoxicity. Importantly, the aerogel with good mechanical strength and structure stability could endure the complex juice solution so that there was no any residue after convenient separation of the aerogel, which proved that the proposed aerogel was a promising adsorbent to be applied to apple juice industry for PAT removal., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A highly efficient and selective method was successfully developed by using magnetic molecularly imprinted polymers (MMIPs) combined with high performance liquid chromatography (HPLC) to quickly determine patulin (PAT) in juice. MMIPs was prepared by surface imprinting method using Fe 3 O 4 nanoparticles as supporter, 2-oxindole as virtual template, (3-Aminopropyl) triethoxysilane (APTES) as functional monomer and tetraethyl orthosilicate (TEOS) as crosslinking agent. The structure of the product was characterized by vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The results showed that MMIP with a particle size of about 450 nm was successfully prepared, the imprinted molecular layer accounted for about 11.6% of the total mass, and the saturation magnetization was about 6.82 emu/g. The maximum adsorption capacities (Qmax) of kinetic and thermodynamic adsorption experiments were 1.97 mg/g and 4.241 mg/g, respectively. The adsorption process was highly selective and fitted well with the pseudo-second-order model. Langmuir model demonstrated that the binding sites were evenly distributed on the surface of the MMIPs. Scatchard analysis showed that MMIPs had two types of binding sites with Qmax of 4.53 mg/g and 5.73 mg/g, respectively. In the actual sample application, the limit of detection (LOD) and the limit of quantification (LOQ) were 3 μg/kg and 10 μg/kg. And the recovery rate of the sample was 86.44-95.50%. MMIPs possessed excellent applicability with stability of 1.11-3.16% and accuracy of 0.63-1.94%. These results indicated that MMIPs had good performance in separating PAT and was suitable for determining PAT in actual samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In this study, a novel magnetic molecularly imprinted polymer (MMIP) was prepared by surface imprinting technology using 2-oxin and 6-HNA as dual virtual templates and 4-vinyl pyridine (4-VP) as the functional monomer for extraction of patulin (PAT) from the surface of magnetic nanoparticles. MMIPs were characterized by fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The results showed that the molecularly imprinted polymer (MIP) was successfully coupled with magnetic nanoparticles and could be used as a magnetic selective recognition material. Moreover, MMIPs have a greater adsorption capacity for PAT than conventional MIPs. The magnetic dispersion solid-phase extraction procedure was optimized and then combined with liquid chromatography-tandem mass spectrometry (MDSPE-LC-MS/MS) for detection of PAT in juice samples. The method showed excellent analytical performance in terms of linearity (ranged between 0.5 μg L -1 and 100 μg L -1 with correlation coefficients (r) higher than 0.999) and limit of detection (LOD) (0.1 μg L -1 , S/N = 3). At three spiking concentrations (1, 10, and 50 μg L -1 ), the mean recoveries were ranged between 79.4% and 97.9% with relative standard deviations (RSDs) < 4.7% (n = 3)., Competing Interests: Declaration of Competing Interest Authors have declared no conflicts of interest., (Copyright © 2019. Published by Elsevier B.V.)

A molecularly imprinted polymer (MIP) with specific adsorption for patulin was successfully polymerized by precipitation polymerization using 2-oxindole (2-oxin) and 6-hydroxynicotinic acid (6-HNA) as dummy template molecules, methylacrylic acid (MAA) as a functional monomer, trimethylolpropane trimethacrylate (TRIM) as a crosslinker, 2,2-azobis-(2-methylpropionitrile) (AIBN) as a initiator, and methanol as a porogen solvent. The molecularly imprinted solid phase extraction (MI-SPE) column was prepared using the polymer as a sorbent and applied for the selective extraction of patulin from real samples. The results showed that the MI-SPE method had high selectivity and specific adsorption towards patulin with mean recoveries ranged between 81.3% and 106.3% and a relative standard deviation (RSD) < 4.5%. Additionally, the developed MI-SPE method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) exhibited good linearity in the range of 1-100 ng mL - 1 with correlation coefficients (R 2 ) >0.998. The limits of detection (LODs, S/N = 3) were 0.05-0.2 ng g - 1 , and the limits of quantification (LOQs, S/N = 10) were 0.2-0.5 ng g - 1 . The developed method showed a better purification and higher patulin recovery for real samples than the quick, easy, cheap, effective, rugged, safe "QuEChERS" method., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The identification and characterization of fungal commensals of the human gut (the mycobiota) is ongoing, and the effects of their various secondary metabolites on the health and disease of the host is a matter of current research. While the neurons of the central nervous system might be affected indirectly by compounds from gut microorganisms, the largest peripheral neuronal network (the enteric nervous system) is located within the gut and is exposed directly to such metabolites. We analyzed 320 fungal extracts and their effect on the viability of a human neuronal cell line (SH-SY5Y), as well as their effects on the viability and functionality of the most effective compound on primary enteric neurons of murine origin. An extract from P. coprobium was identified to decrease viability with an EC 50 of 0.23 ng/µL in SH-SY5Y cells and an EC 50 of 1 ng/µL in enteric neurons. Further spectral analysis revealed that the effective compound was patulin, and that this polyketide lactone is not only capable of evoking ROS production in SH-SY5Y cells, but also diverse functional disabilities in primary enteric neurons such as altered calcium signaling. As patulin can be found as a common contaminant on fruit and vegetables and causes intestinal injury, deciphering its specific impact on enteric neurons might help in the elaboration of preventive strategies., Competing Interests: The authors declare no conflict of interest.

Aims: The aim of this study was to evaluate the elimination of patulin (PAT) by Lactobacillus plantarum ATCC 8014 from artificially contaminated apple juice and its dependence on prebiotic, citric acid and ascorbic acid content., Methods and Results: A central composite design was used for studying each of the three factors at five levels to find the optimum concentrations. The results showed that inserting 2·3% (w/v) fructooligosaccharide, 213 mg l -1 ascorbic acid and 1·4 g l -1 citric acid to apple juice with inoculating 3·6 × 10 11 CFU per ml, L. plantarum improved the efficiency of PAT removal to 95·91% during 6 weeks cold storage. SDS-PAGE of cell surface proteins of probiotics revealed that surface layer proteins have an important role in PAT removal from apple juice. No significant difference was observed in the flavour and colour of the optimized synbiotic apple juice and in the control sample until 3 weeks of cold storage., Conclusion: Lactobacillus plantarum ATCC 8014 is capable of PAT removal from artificially contaminated synbiotic apple juice., Significance and Impact of the Study: Synbiotic apple juice artificially contaminated with PAT will be safe for consumers after the first day of probiotic inoculation; and surface layer proteins of probiotic cells are responsible for PAT removal., (© 2018 The Society for Applied Microbiology.)

An innovative approach based on a surface functional monomer-directing strategy for the construction of a sensitive and selective molecularly imprinted electrochemical sensor for patulin recognition is described. A patulin imprinted platinum nanoparticle (PtNP)-coated poly(thionine) film was grown on a preformed thionine tailed surface of PtNP-nitrogen-doped graphene (NGE) by electropolymerization, which provided high capacity and fast kinetics to uptake patulin molecules. Thionine acted not only as a functional monomer for molecularly imprinted polymer (MIP), but also as a signal indicator. Enhanced sensitivity was obtained by combining the excellent electric conductivity of PtNPs, NGE, and thionine with multisignal amplification. The designed sensor displayed excellent performance for patulin detection over the range of 0.002-2 ng mL -1 (R 2 = 0.995) with a detection limit of 0.001 ng mL -1 for patulin. In addition, the resulting sensor showed good stability and high repeatability and selectivity. Furthermore, the feasibility of its applications has also been demonstrated in the analysis of real samples, providing novel tactics for the rational design of MIP-based electrochemical sensors to detect a growing number of deleterious substances.

Patulin is a naturally produced toxin having potential carcinogenic properties. It is mainly produced by species of Penicillium growing on fruits, especially on apples. Detoxification of patulin, therefore, is very important for providing food safety. In this study, sulfhydryl-terminated, silica coated iron oxide beads were investigated as a multi-use sorbents for effective recovery of patulin from apple juice. The effect of beads amount, contact time, pH and temperature were evaluated for high adsorption capacity and the results showed maximum adsorption capacity at a reaction condition of 1.5 mg of beads for 4 h incubation at pH 7.2 and 25 °C. These sorbents were highly effective both in aqueous solution and apple juice with adsorption efficiencies of 99% and 71.25%, respectively. Adsorption process was explained by Langmuir isotherm model with pseudo-second order kinetic model. Thermodynamic parameters described spontaneous adsorption of patulin onto beads with high feasibility and preferences. The reusability of sulfhydryl coated magnetic beads was shown for at least four times without any significant decreases in efficiency. Results showed that this sorbent had potential for removal of patulin from apple juice without any negative effects on final quality parameters, Brix, color, clarity, total sugar and titratable acidity., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Patulin (PAT) is one of the most common toxic contaminants of apple juice, which causes severe food safety issues throughout the apple industry. In order to remove PAT efficiently, a metal-organic framework-based adsorbent (UiO-66(NH 2 )@Au-Cys) was successfully synthesized and used for PAT removal from juice-pH simulation solution and real apple juice. Batch adsorption experiments were systematically performed to study the adsorption behavior for PAT. The results showed that adsorption process could be well described by the Pseudo-second order model and Freundlich isotherm model. The maximum adsorption capacity (4.38 µg/mg) was 10 times higher than the microbe-based biosorbents. Thermodynamic investigation demonstrated that adsorption process was spontaneous and endothermic. Furthermore, no marked cytotoxicity on NIH 3T3 cell lines was observed when the concentration of the adsorbent was lower than 10 μg/mL. Therefore, UiO-66(NH 2 )@Au-Cys is a potential adsorbent for PAT removal from apple juice with little quality changes., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Quick and simple analytical methodology has been developed for the measurement of patulin in apple juice by combining single-drop liquid-liquid-liquid microextraction with isotope dilution ultra-high performance liquid chromatography-mass spectrometry. After systematic parameters optimization, the whole sample pretreatment only consisted of single extraction that consumed 1.5 mL ethyl acetate. While, other methods usually needed complicated pretreatment, including extraction, purification, evaporation and redissolution. This sample pretreatment method could greatly lower the interferences from sugar-rich matrix, and the limit of detection was 0.5 μg/L and limit of quantification was 2 μg/L in apple juice. Moreover, linear range covered three orders of magnitude from 2 to 2000 μg/L. The proposed method is promising for patulin extraction and detection in apple juice, which will opens a new perspective in the enrichment of trace contaminations in high sugar complex matrix., (Copyright © 2018. Published by Elsevier Ltd.)

Lung cancer is the most lethal form of cancer in the world. Its development often involves an overactivation of the nuclear factor kappa B (NF-κB) pathway, leading to increased cell proliferation, survival, mobility, and a decrease in apoptosis. Therefore, NF-κB inhibitors are actively sought after for both cancer chemoprevention and therapy, and fungi represent an interesting unexplored reservoir for such molecules. The aim of the present work was to find naturally occurring lung cancer chemopreventive compounds by investigating the metabolites of Penicillium vulpinum , a fungus that grows naturally on dung. Penicillium vulpinum was cultivated in Potato Dextrose Broth and extracted with ethyl acetate. Bioassay-guided fractionation of this extract was performed by measuring NF-κB activity using a HEK293 cell line transfected with an NF-κB-driven luciferase reporter gene. The mycotoxin patulin was identified as a nanomolar inhibitor of TNF-α-induced NF-κB activity. Immunocytochemistry and Western blot analyses revealed that its mechanism of action involved an inhibition of p65 nuclear translocation and was independent from the NF-κB inhibitor α (IκBα) degradation process. Enhancing its interest in lung cancer chemoprevention, patulin also exhibited antiproliferative, proapoptotic, and antimigration effects on human lung adenocarcinoma cells through inhibition of the Wnt pathway., Competing Interests: The authors declare no conflict of interest.

In this paper, molecular imprinting technique was applied to the electrochemical sensor. We used 2-oxindole as dummy template, ρ-Aminothiophenol (ρ-ATP) as functional monomers, combined with the high sensitivity of electrochemical detection, to achieve a specific and efficient detection of patulin in fruit juice. In addition, carbon dots and chitosan were used as the modifying material to improve electron-transfer rate, expand the electroactive surface of glassy carbon electrode and enhance strength of the signal. The Au-S bond and hydrogen bond were employed to complete the assembly of the ρ-ATP and 2-oxindole on the surface of the electrode. Then, polymer membranes were formed by electropolymerization in a polymer solution containing ρ-ATP, HAuCl 4 , tetrabutylammonium perchlorate (TBAP) and the template molecule 2- oxindole. After elution, the specific cavity can adsorb the target patulin. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements were performed to monitor the electropolymerization process and its optimization. Transmission electron microscopy (TEM), Scanning electron microscopy (SEM) and Atomic force microscopy (AFM) analyses were used for characterization. This was the first time that the molecularly imprinted polymer (MIP) technology combined with carbon dots, chitosan and Au nanoparticles modification and was applied in the electrochemical detection of patulin. The linear response range of the MIP sensor was from 1 × 10 -12 to 1 × 10 -9 molL -1 and the limit of detection (LOD) was 7.57 × 10 -13 molL -1 . The sensor had a high-speed real-time detection capability, low sample consumption, high sensitivity, low interference, good stability and could become a new promising method for the detection of patulin., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Reaching trace amounts of mycotoxin contamination requires sensitive and selective analytical tools for their determination. Improving the selectivity of sample pretreatment steps covering new and modern extraction techniques is one way to achieve it. Molecularly imprinted polymers as selective sorbent for extraction undoubtedly meet these criteria. The presented work is focused on the hyphenation of on-line molecularly imprinted solid-phase extraction with a chromatography system using a column-switching approach. Making a critical comparison with a simultaneously developed off-line extraction procedure, evaluation of pros and cons of each method, and determining the reliability of both methods on a real sample analysis were carried out. Both high-performance liquid chromatography methods, using off-line extraction on molecularly imprinted polymer and an on-line column-switching approach, were validated, and the validation results were compared against each other. Although automation leads to significant time savings, fewer human errors, and required no handling of toxic solvents, it reached worse detection limits (15 versus 6 μg/L), worse recovery values (68.3-123.5 versus 81.2-109.9%), and worse efficiency throughout the entire clean-up process in comparison with the off-line extraction method. The difficulties encountered, the compromises made during the optimization of on-line coupling and their critical evaluation are presented in detail., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Penicillium frequentans (Pf909) reduces brown rot caused by Monilinia spp. in stone fruit. The registration of a microbial biocontrol agent in Europe requires information on the risks and safety of a biological product. This study focused on the impact of the physical environment on Pf909 survival and growth, Pf909 mycotoxin production on fruit surface, and the Pf909 resistance to commercial antifungal compounds used in animal and human medicine. The effect of temperature (4 to 37°C), water activity (0.999 to 0.900), pH (3 to 11), light intensity (0, 90 and 180lm) and photoperiod (0/24, 12/12, 16/8, 24/0; light/dark) on mycelial growth and sporulation of Pf909 were monitored for 10days in vitro on culture medium. Antifungal activity of antifungal compounds on mycelial growth of Pf909 was also measured by a quantitative micro spectrophotometric assay after 72h of incubation. The presence or absence of four non-volatile mycotoxins (patulin, penicillic acid, ochratoxin A and citrinin) on nectarine surfaces treated with Pf909 was determined by HPLC. Growth rate was significantly influenced by water activity, temperature and light exposure conditions. Pf909 showed maximum growth and sporulation at 22°C and 25°C, in wet conditions (0.999 water activity), with a pH5.6 to 9, and in darkness or a short light photoperiod. Our results showed all antifungal compounds used reduced significantly Pf909 mycelial growth at tested commercial doses. HPLC data analysis showed that 7days after biofungicide (Pf909) application there were no mycotoxin products on the surface of nectarine. Finally, no phylogenetic relationship has been shown among Pf909 and other species of Penicillium that produce mycotoxins. In conclusion, from an ecological point of view, Pf909 would establish and survive actively over a broad range of climatic conditions. The probability of risks to human and animal health is considered very low., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The purpose of this study was to identify the key factors involved in patulin adsorption by heat-inactivated lactic acid bacteria (LAB) cells. For preventing bacterial contamination, a sterilization process was involved in the adsorption process. The effects of various physical, chemical, and enzymatic pre-treatments, simultaneous treatments, and post-treatments on the patulin adsorption performances of six LAB strains were evaluated. The pre-treated cells were characterized by scanning electron microscopy (SEM). Results showed that the removal of patulin by viable cells was mainly based on adsorption or degradation, depending on the specific strain. The adsorption abilities were widely increased by NaOH and esterification pre-treatments, and reduced by trypsin, lipase, iodate, and periodate pre-treatments. Additionally, the adsorption abilities were almost maintained at pH 2.2-4.0, and enhanced significantly at pH 4.0-6.0. The effects of sodium and magnesium ions on the adsorption abilities at pH 4 were slight and strain-specific. A lower proportion of patulin was released from the strain with higher adsorption ability. Analyses revealed that the physical structure of peptidoglycan was not a principal factor. Vicinal OH and carboxyl groups were not involved in patulin adsorption, while alkaline amino acids, thiol and ester compounds were important for patulin adsorption. Additionally, besides hydrophobic interaction, electrostatic interaction also participated in patulin adsorption, which was enhanced with the increase in pH (4.0-6.0).

A fast and simple solvent microextraction technique using salting out-vortex-assisted liquid-liquid microextraction (salting out-VALLME) was developed for the extraction of furfurals (2-furfural (2-F), 3-furfural (3-F), 5-methylfurfural (5-MF) and 5-hydroxymethylfurfural (5-HMF)) and patulin (PAT) in fruit juice samples. The optimum extraction conditions for 5 mL sample were: extraction solvent, 1-hexanol; volume of extractant, 200 µL; vortex time, 45 s; salt addition, 20%. The simultaneous determination of the furfurals and PAT were investigated using high performance liquid chromatography coupled with diode array detector (HPLC-DAD). The separation was performed using ODS Hypersil C18 column (4.6 mm i.d × 250 mm, 5 μm) under gradient elution. The detection wavelengths used for all compounds were 280 nm except for 3-F (210 nm). The furfurals and PAT were successfully separated in less than 9 min. Good linearities (r(2)>0.99) were obtained within the range 1-5000 μg L(-1) for all compounds except for 3-F (10-5000 µg L(-1)) and PAT (0.5-100 μg L(-1)). The limits of detection (0.28-3.2 µg L(-1)) were estimated at S/N ratio of 3. The validated salting out-VALLME-HPLC method was applied for the analysis of furfurals and PAT in fruit juice samples (apple, mango and grape)., (© 2013 Published by Elsevier B.V.)

This study aimed to investigate the adsorption of patulin from apple juice by Ca-alginate-activated carbon (Ca-alginate-AC) beads. The capacity of patulin was determined by high-performance liquid chromatography. The results showed that Ca-alginate-AC beads have significant ability to reduce patulin from contaminated apple juice. Furthermore, the adsorption process did not affect the quality of apple juice. The effects of contact time, initial patulin concentration, adsorbent dose, and temperature were assessed. The removal percentage of patulin increased with contact time, adsorbent dose, and temperature. A reduction was also noted to bind patulin at increased levels of contamination. The equilibrium data were fitted to Langmuir, Freundlich, and Temkin isotherm models and the isotherm constants were calculated at different temperatures. The adsorption equilibrium was best described by the Freundlich isotherm (R(2) > 0.990). The pseudo 1st-order model was found to describe the kinetic data satisfactorily. Thermodynamic parameters such as standard Gibbs free energy (ΔG◦◦), standard enthalpy (ΔH◦), and standard entropy (ΔS◦) were evaluated. The results showed that the adsorption was spontaneous and endothermic nature., (© 2013 Institute of Food Technologists®)

Patulin is a mycotoxin that contaminates pome fruits and derived products worldwide. Basidiomycete yeasts belonging to the subphylum Pucciniomycotina have been identified to have the ability to degrade this molecule efficiently and have been explored through different approaches to understand this degradation process. In this study, Sporobolomyces sp. strain IAM 13481 was found to be able to degrade patulin to form two different breakdown products, desoxypatulinic acid and (Z)-ascladiol. To gain insight into the genetic basis of tolerance and degradation of patulin, more than 3,000 transfer DNA (T-DNA) insertional mutants were generated in strain IAM 13481 and screened for the inability to degrade patulin using a bioassay based on the sensitivity of Escherichia coli to patulin. Thirteen mutants showing reduced growth in the presence of patulin were isolated and further characterized. Genes disrupted in patulin-sensitive mutants included homologs of Saccharomyces cerevisiae YCK2, PAC2, DAL5, and VPS8. The patulin-sensitive mutants also exhibited hypersensitivity to reactive oxygen species as well as genotoxic and cell wall-destabilizing agents, suggesting that the inactivated genes are essential for tolerating and overcoming the initial toxicity of patulin. These results support a model whereby patulin degradation occurs through a multistep process that includes an initial tolerance to patulin that utilizes processes common to other external stresses, followed by two separate pathways for degradation.

A new solid-phase extraction (SPE) pretreatment method using a home-made polyvinylpolypyrrolidone-florisil (PVPP-F) column was developed for the analysis of patulin in apple and hawthorn products in China. Fifty samples (25 apple juices, 12 apple jams, and 13 hawthorn juices) were prepared using the new method and then analyzed by high performance liquid chromatography with diode array detection (HPLC-DAD) on an Agela Venusil MP C(18) reversed-phase column (4.6 mm × 250 mm, 5 μm). The cleanup results for all samples using home-made PVPP-F column were compared with those obtained using a MycoSep®228 AflaPat column. The correlation coefficient R (0.9998) fulfilled the requirement of linearity for patulin in the concentration range of 2.5-250 μg/kg. The limits of detection (LODs) and quantification (LOQs) of patulin were 3.99 and 9.64 μg/kg for PVPP-F column, and 3.56 and 8.07 μg/kg for MycoSep®228 AflaPat column, respectively. Samples were spiked with patulin at levels ranging from 25 to 250 μg/kg, and recoveries using PVPP-F and MycoSep®228 AflaPat columns were in the range of 81.9-100.9% and 86.4-103.9%, respectively. Naturally occurring patulin was found in 2 of 25 apple juice samples (8.0%) and 1 of 13 hawthorn juice samples (7.7%) at concentrations ranging from 12.26 to 36.81 μg/kg. The positive results were further confirmed by liquid chromatography electrospray ionization mass spectrometry (LC-ESI-MS)., (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A liquid chromatography electrospray ionization tandem mass spectrometry method for the determination of patulin in apple- and pear-based foodstuffs was developed. The sample preparation is based on the QuEChERS procedure involving an initial extraction step with water and acetonitrile, followed by a partitioning step after the addition of magnesium sulfate and sodium chloride. The cleanup was performed by using dispersive solid-phase extraction with a mixture of magnesium sulfate, primary secondary amine sorbent, and n-octadecylsiloxane sorbent added together to the extract. The cleaned extract was finally evaporated and reconstituted in water prior to injection. Quantitation was performed by isotope dilution using ((13)C(7))-patulin as internal standard. The method was first fully validated in three different baby food products including apple-pear juice, apple-pear puree, and infant cereals. Then the scope of application of the method was extended to pear concentrate, raw apples, apple flakes (naturally contaminated), dried apples, and yogurt. The sensitivity achieved by the method in all matrices gave limits of detection (LOD) and quantitation (LOQ) of ≤0.5 and ≤10 μg/kg, respectively, which was compliant with maximum levels settled in Commission Regulation (EC) No. 1881/2006. Method performances for all matrices also fulfilled the criteria established in the CEN/TR 16059:2010 document. Indeed, recoveries were within the 94-104% range; relative standard deviations of repeatability (RSD(r)) and intermediate reproducibility (RSD(IR)) were ≤7.5 and ≤13.0%, respectively, and trueness in an infant apple drink (FAPAS 1642) was measured at 99%.

Propylthiol functionalized SBA-15 silica was investigated to detoxify aqueous solutions contaminated with the regulated mycotoxin patulin. Micelle templated silicas with a specific pore size were synthetically modified to possess propylthiol groups, a functional group known to form Michael reaction products with the conjugated double bond system of patulin. BET surface area analysis indicated the propylthiol functionalized SBA-15 possesses channels with the pore size of 5.4 nm and a surface area of 345 m(2)g(-1). Elemental analysis indicates the silicon/sulfur ratio to be 10:1, inferring one propylthiol substituent for every ten silica residues. The propylthiol modified SBA-15 was effective at significantly reducing high levels of patulin from aqueous solutions (pH 7.0) in batch sorption assays at room temperature. The material was less effective at lower pH; however heating low pH solutions and apple juice to 60 °C in the presence of propylthiol functionalized SBA-15 significantly reduced the levels of patulin in contaminated samples. Composite molecular models developed by semi-empirical PM3 and empirical force field methods support patulin permeation through the mesoporous channels of propylthiol functionalized SBA-15. Density functional study at the B3LYP/6-31G(d,p) level predicts the proposed patulin adducts formed by reaction with the thiol residues exhibit less electrophilic properties than patulin. It is demonstrated the use of propylthiol functionalized SBA-15 is a viable approach to reduce patulin levels in aqueous solutions, including contaminated apple juice., (Published by Elsevier B.V.)

Patulin is a mycotoxin produced by species of Penicillium and Aspergillus and is toxic to a wide range of organisms, including humans and livestock. To produce large amount of pure patulin for research purposes, high-speed counter-current chromatography (HSCCC) and preparative high-performance liquid chromatography (prep-HPLC) were applied to the purification of patulin. Apple juice was inoculated with P. expansum and containing 0.5 mg patulin per ml was used as a starting material for separation. For HSCCC, a biphasic solvent system consisted of ethyl acetate-hexane-pH 4 acetic acid (7.5:2.5:10, v/v/v) was used. For prep-HPLC, the separation was carried out in a C18 reversed-phase preparative column with a mobile phase containing acetonitrile-pH 4 acetic acid (5:95, v/v). Fractions containing patulin were collected and analysed by analytical HPLC and identified by congruent retention time and ultraviolet/visible (UV-VIS) spectrum of the standard. The structure of the purified patulin was confirmed by mass spectrometry and nuclear magnetic resonance. HSCCC produced 21.9 mg of patulin from 50 ml apple juice culture whereas the prep-HPLC yielded 18.1 mg. HSCCC also produced purer patulin than the prep-HPLC (98.6 versus 96.3%) and higher recovery (86.2 versus 71.3%). In addition, the HSCCC method is advantageous for its lower cost and a simpler procedure compared with the prep-HPLC. This one-step HSCCC method can potentially provide a simple, effective and environmentally friendly tool for obtaining gram-level pure patulin for toxicology, detoxification and many other patulin-related studies.

Aims: To assess the ability of fungi isolated from grapes to produce patulin and citrinin., Methods and Results: A total of 446 Aspergillus isolates belonging to 20 species and 101 Penicillium isolates were inoculated in Czapek yeast extract agar and yeast extract sucrose agar and incubated for 7 days at 25 degrees C. Extracts were analysed for patulin and citrinin by thin-layer chromatography. None of the isolates of Aspergillus spp. produced either patulin or citrinin. Patulin was produced by three isolates of Penicillium expansum and two of Penicillium griseofulvum. Citrinin was produced by five isolates of P. expansum, two of Penicillium citrinum and one of Penicillium verrucosum., Conclusions: Our results show that the Aspergillus and Penicillium species commonly isolated from grapes are not a source of the mycotoxins, patulin and citrinin., Significance and Impact of the Study: The possibility of co-occurrence of patulin and citrinin with ochratoxin A in grapes and grape products remain low, owing to the low frequency of isolation of potentially producing species.

Many endophytic fungi are known to protect plants from plant pathogens, but the antagonistic mechanism has rarely been revealed. In this study, we wished to learn whether an endophytic Aspergillus sp., isolated from Taxus mairei, would indeed produce bioactive components, and if so whether (a) they would antagonize plant pathogenic fungi; and (b) whether this Aspergillus sp. would produce the compound also under conditions of confrontation with these fungi. The endophytic fungal strain from T. mairei was identified as Aspergillus clavatonanicus by analysis of morphological characteristics and the sequence of the internal transcribed spacers (ITS rDNA) of rDNA. When grown in surface culture, the fungus produced clavatol (2',4'-dihydroxy-3',5'-dimethylacetophenone) and patulin (2-hydroxy-3,7-dioxabicyclo [4.3.0]nona-5,9-dien-8-one), as shown by shown by NMR, MS, X-ray, and EI-MS analysis. Both exhibited inhibitory activity in vitro against several plant pathogenic fungi, i.e., Botrytis cinerea, Didymella bryoniae, Fusarium oxysporum f. sp. cucumerinum, Rhizoctonia solani, and Pythium ultimum. During confrontation with P. ultimum, A. clavatonanicus antagonized its growth of P. ultimum, and both clavatol as well as patulin were formed as the only bioactive components, albeit with different kinetics. We conclude that A. clavatonanicus produces clavatol and patulin, and that these two polyketides may be involved in the protection of T. mairei against attack by plant pathogens by this Aspergillus sp.

Certain species of Penicillium have been reported to produce the mycotoxin patulin, and research was undertaken to identify these with the use of oligonucleotide primer pairs. Species examined were found in food, plants, and soil and were reported to produce patulin. Penicillium expansum is the most commonly detected species linked to the presence of patulin in apple juice. At least 10 different enzymes are involved in the patulin biosynthetic pathway, including the isoepoxydon dehydrogenase (idh) gene. Based on nucleotide sequences previously determined for the idh gene in Penicillium species, PCR primers were designed for the species-specific detection of patulin-producing species. The 5' primers were based on differences in the second intron of the idh gene. To ensure that the primer pairs produced a PCR product restricted to the species for which it was designed, and not to unrelated species, all of the primer pairs were tested against all of the Penicillium species. With one exception, it was possible to detect a reaction only with the organism of interest. The primer pair for Penicillium griseofulvum also amplified DNA from Penicillium dipodomyicola, a closely related species; however, it was possible to distinguish between these two species by doing a second amplification, with a different primer pair specific only for P. dipodomyicola. Consequently, with different primer sets, it was possible to identify individual patulin-producing species of Penicillium.

An investigation on the presence of mycotoxin patulin was performed on 71 apple juices and concentrates and 21 infant fruit purees purchased from retail outlets or producers in Tunisia, by reversed-phase high-performance liquid chromatography using a C18 column with UV detection at 276 nm, keeping the recovery higher than 96% for spiking levels ranging between 30 and 100 ppb. The detection limit of the method was found to be 5 ppb. The findings showed that 12% of the samples locally produced in Tunisia were contaminated by patulin, with a maximum level of 6 ppb, and 5% of the samples imported and marketed in Tunisia were contaminated at a mean level less than 6 ppb. No detectable patulin contaminations for apple cider and infant fruit puree samples were found.

The performance of 4 purification methods for the analysis of patulin in apple juice was evaluated by high-performance liquid chromatography (HPLC). Samples were spiked with patulin at 10, 20, 50, 100, and 150 ppb (ng/mL) and extracted by one of 4 methods (3 solid-phase extraction and one liquid-liquid extraction), and then analyzed by HPLC-UV under the same isocratic conditions. The methods were validated for recovery, linearity, and precision at high and low concentrations. Recoveries were all >70% for spiking range 10-150 ppb. The relative standard deviation for repeatability was found to meet European Union Directive requirements. In addition, all the methods showed baseline separation from hydroxymethylfurfural.

The use of solid-phase filtration column (MycoSep 228) and liquid chromatography for determination of patulin in apple and hawthorn beverages was investigated. The method passed a series of validation tests, including separation efficiency, sensitivity, repeatability, validation within a collaborative trial, recoveries, and applicability. Accuracy and precision were very good for determination of patulin in both spiked and naturally contaminated apple/hawthorn beverage samples at levels of 10 microg/L and above, with limits of detection and quantification at 8 and 23 [microg/L, respectively. The applicability of the method was tested by analyzing commercially available domestic apple and hawthorn beverages. Patulin was found in 3 of 52 (5.77%) apple beverages at concentrations ranging from 63.45 to 88.44 [microg/L, and in 6 of 43 (13.95%) hawthorn beverages ranging from 19.8 to 206.88 microg/L. Among these were 3 apple and 4 hawthorn beverage samples with toxin levels that exceeded the Chinese legislative requirement of 50 microg/L in apple- and hawthorn-based products intended for human consumption. Comparable tests revealed that the results obtained by both the new MycoSep-based method and the official AOAC method are not significantly different (t value = 0.003268 < to.05, P > 0.05).

The aim of this research was to compare the occurrence of patulin in a large group of organic, conventional, and handcrafted apple juices marketed in Belgium. An analytical procedure based on high-performance liquid chromatography with UV detection was validated and used to analyze 177 apple juice samples: 65 organic, 90 conventional, and 22 handcrafted. Patulin was detected in 22 samples (12%), and quantification was possible in 10 (6%) of these samples. The patulin content was higher than the European legal limit of 50 microg/liter in two samples of organic apple juice. Although, the incidence of patulin in organic (12%), conventional (13%), and handcrafted (10%) apple juices was not significantly different (P = 0.863), the mean concentration of patulin in contaminated samples was significantly higher in organic (43.1 microg/liter) than in conventional (10.2 microg/liter) (P = 0.02) and handcrafted (10.5 microg/liter) (P = 0.037) apple juice. The highest patulin concentrations were found in the most expensive apple juices because of the higher price of organic apple juice. This relation was not observed when only conventional apple juices were analyzed.

Patulin is a mycotoxin mainly produced by Penicillium and Aspergillus. We investigated the incidence of patulin contamination in 179 samples of apple juice and 9 samples of mixed juice (containing apple juice concentrate as an ingredient) commercially available in the Tohoku district of Japan. Patulin was detected in 3 of 143 samples containing domestic fruits and in 6 of 45 samples containing imported products and products produced in Japan using imported apple juice concentrate. Patulin analyses were carried out using high-pressure liquid chromatography with a detection limit of 4 microg/liter. The patulin content of contaminated domestic samples (three samples with concentrations ranging from 6 to 10 microg/liter), imported samples (one sample with a concentration of 15 microg/liter), and domestic samples produced containing imported concentrate (five samples with concentrations ranging from 6 to 9 microg/liter) was lower than the maximum limit of 50 microg/liter currently adopted by many countries, including Japan.

In the search for new natural products with anti-oxidant activity, we have combined the cell-free assay based on the scavenging of the stable radical 2,2-diphenyl-1-picrylhydrazyl (DPPH), with a bioassay that detects oxidative mutagens. This bioassay uses a new Escherichia coli tester strain, IC203, specifically sensitive to oxidative stress due to a deficiency in the OxyR function. OxyR is a redox-sensitive transcriptional activator of genes encoding anti-oxidant enzymes such as catalase and peroxiredoxin alkyl hydroperoxide reductase. The positive response observed in E. coli IC203 with several known anti-oxidants, including cysteine, catechol and ascorbic acid, suggested to us the usefulness of the mutagenicity assay for a rapid screening of anti-oxidant compounds. The extract from Penicillium novae-zeelandiae was found to scavenge the DPPH radical. Subsequently, guided by the DPPH-scavenging assay and the oxidative mutagenesis assay, we isolated and identified three compounds in fractions from that active extract: patulin (1). 3-hydroxybenzyl alcohol (2). and gentisyl alcohol (2,5-dihydroxybenzyl alcohol) (3). Of these, gentisyl alcohol showed both DPPH-scavenging activity and oxidative mutagenicity. This compound also gave rise to intracellular formation of superoxide, evaluated by monitoring the oxidation of dihydroethidium, and was able to inhibit mutagenesis induced by the model oxidant t-butyl hydroperoxide (t-BuOOH).

Patulin is a mycotoxin produced primarily by Penicillium expansum, a mold responsible for rot in apples and other fruits. The growth of this fungus and the production of patulin are common in fruit that has been damaged. However, patulin can be detected in visibly sound fruit. The purpose of this project was to determine how apple quality, storage, and washing treatments affect patulin levels in apple cider. Patulin was not detected in cider pressed from fresh tree-picked apples (seven cultivars) but was found at levels of 40.2 to 374 microg/liter in cider pressed from four cultivars of fresh ground-harvested (dropped) apples. Patulin was not detected in cider pressed from culled tree-picked apples stored for 4 to 6 weeks at 0 to 2 degrees C but was found at levels of 0.97 to 64.0 microg/liter in cider pressed from unculled fruit stored under the same conditions. Cider from controlled-atmosphere-stored apples that were culled before pressing contained 0 to 15.1 microg of patulin per liter, while cider made from unculled fruit contained 59.9 to 120.5 microg of patulin per liter. The washing of ground-harvested apples before pressing reduced patulin levels in cider by 10 to 100%, depending on the initial patulin levels and the type of wash solution used. These results indicate that patulin is a good indicator of the quality of the apples used to manufacture cider. The avoidance of ground-harvested apples and the careful culling of apples before pressing are good methods for reducing patulin levels in cider.

Aims: To study the influence of culture preservation methods and culture conditions on the production of the mycotoxins patulin and citrinin by Penicillium expansum., Methods and Results: Ten strains of Penicillium expansum were preserved using subculture and maintenance at 4 degrees C, mineral oil, drying on silica gel and freeze-drying. Patulin and citrinin production was assessed on yeast extract sucrose agar (YES) and grape juice agar (GJ), using TLC before and after 0.5, 2-3, 6 and 12 months preservation. Citrinin was detected in all cultures for all preservation techniques on YES. The patulin profiles obtained differed with strain and culture media used., Conclusions: Citrinin production seems to be a stable character for the tested strains. There is a tendency for patulin detection with time apparently more consistent for silica gel storage and freeze-drying, especially when the strains are grown on GJ., Significance and Impact of the Study: Variability in the profiles of the mycotoxins tested seems to be more strain-specific than dependent on the preservation technique used.

The purpose of this study was to investigate the patulin contamination of apple juices consumed by the Turkish population. Patulin was detected using high-performance liquid chromatography (HPLC) with a UV detector at 280 nm, and the identification of patulin was further confirmed by thin-layer chromatography (TLC). Using HPLC, the recoveries were 79.9 +/- 6.7% and 83.7 +/- 4.6%, and the coefficients of variation were 8.4 and 5.5% for apple juices spiked with the known amounts of patulin (60 and 120 microg/liter. respectively). The minimum patulin level detected was 5 ng in a standard solution and 5 microg/liter in apple juices. The TLC method was used only to confirm patulin levels higher than 20 microg/liter (100 ng/spot) in apple juices. The total number of samples was 45. Patulin was present in detectable levels in 60% of apple juices at concentrations ranging from 19.1 to 732.8 microg/liter. Forty-four percent of the apple juice samples had patulin contamination levels higher than 50 microg/ liter, which is the allowable upper limit in Turkey.

Penicillium urticae (NRRL 2159A) was grown in culture broth containing 1 muCi of [1-14C-A1acetate to produce [14C]patulin. [14C]patulin was purified from the broth and added to apple cider. After the patulin concentration of the cider was adjusted to 30 mug/ml with unlabeled patulin, the cider was subjected to various charcoal treatments. [14C]patulin was completely removed by shaking the cider with 20 mg of activated charcoal per ml and by eluting the cider through a 40- to 60-mesh charcoal column. Activated charcola at 5 mg/ml reduced patulin in naturally contaminated cider to nondetectable levels.

A gas-liquid chromatographic system which allows most of the metabolites of the patulin pathway to be separated and quantitated has been developed. The metabolites are mostly phenols, and after conversion to their trimethylsilyl derivatives they are efficiently separated on a 3.18 mm O.D. stainless-stell column of 10% QF-1 on Gas-Chrom Q using a temperature programme. The detection limits for the three phenolic acids, 6-methylsalicylic acid, m-hydroxybenzoic acid and gentisic acid are all markedly lower than those obtained in previous systems. The usefulness of the system has been assessed by quantitating the patulin pathway metabolites present in culture filtrates of Penicillium urticae NRRL 2159A.

The toxinogenesis of 10 strains of Penicillium granulatum, 5 of P. expansum, 4 of Aspergillus terreus, 2 of A. clavatus, P. thomii, P. urticae, P. italicum and 1 of P. claviforme was tested at 26 degrees C in Czapek's enriched liquid medium (8 p. 1000 glucose + 2 p. 1000 yeast extract). 6 strains of P. granulatum, 5 of P. expansum, 1 of P claviforme and P. thomii produced patulin after 9 days of culture. Mycotoxin concentrations recovered was between 0.2 ppm and 3127 ppm. Highly toxinogenic strains are Penicillium granulatum; but patulin in silages was not associated with P. granulatum.

An analytical method for the determination of Patulin in tomatoes, pears, apples, cucumbers and plums is described. The determination limit of the method is 40 mug Patulin/kg. With additions between 100-500 mug Patulin/kg the recovery rates lie between 86--95%. After a pre-purification of the crude extract by column chromatography and liquid-liquid extraction the Patulin is determined thin-layer chromatographically by reflectance measurement at 273 nm.