Search

Starch is one of the best candidates to replace non-renewable plastics thanks to its plentiful availability in nature, and low cost. Food industry produces large amount of starch-containing waste, which are not utilizable as nutrients, therefore have potential for non-food applications. However, some of the physicochemical characteristics of starch, such as low thermal stability and high hydrophilicity are undesirable for many applications. Supercritical CO2 is an attractive alternative media for the chemical modification of starch due to its unique tuneable properties, non-toxicity and reduced cost. In this study we performed the benzoylation of starch using vinyl benzoate via a base-catalysed transesterification reaction in supercritical CO2 employing different reaction conditions (temperature, pressure, reaction time, reagents feed) obtaining a wide range of degrees of substitution (0.01-3.00), as determined via elemental analysis and NMR. The modified starches were fully characterized (FT-IR, TGA, DSC, SEM, contact angle, rheology), revealing an overall increased hydrophobicity and improved thermal stability while retaining most of their biodegradability potential. To the best of our knowledge, this is the first report of benzoylation of starch in supercritical CO2 (scCO2), paving the way for the industrial application of this novel solvent in the hydrophobization of starches.

Introduction: Optimizing the approach to older adults with cancer is now a priority given the increasing frequency of new cancer diagnoses that are made in the older population. The comprehensive geriatric assessment (CGA) represents the gold‐standard for (1) defining prognosis and ability to withstand cancer treatments, (2) exploring the multiple aspects that define the complexity of frail older persons, and (3) designing person‐tailored interventions. Materials and methods: In this document, based on a comprehensive revision of the literature, the Italian Society for Geriatrics and Gerontology proposes a CGA model (ONCOGER CGA) to be adopted by oncology centers for their routine approach to older patients with cancer. Results and discussion: A widespread use of this standardized CGA format will facilitate comparisons across institutions, promote studies based on a multidimensional patient assessment, and foster the inclusion of geriatric endpoints in oncological clinical trials. Furthermore, we predict that the use of a standardized CGA approach will increase the integration of geriatricians into oncology care teams with the final result of improving therapeutic choices and clinical outcomes. [ABSTRACT FROM AUTHOR]

The development of functional microsystems and microrobots that have characterized the last decade is the result of a synergistic and effective interaction between the progress of fabrication techniques and the increased availability of smart and responsive materials to be employed in the latter. Functional structures on the microscale have been relevant for a vast plethora of technologies that find application in different sectors including automotive, sensing devices, and consumer electronics, but are now also entering medical clinics. Working on or inside the human body requires increasing complexity and functionality on an ever-smaller scale, which is becoming possible as a result of emerging technology and smart materials over the past decades. In recent years, additive manufacturing has risen to the forefront of this evolution as the most prominent method to fabricate complex 3D structures. In this review, we discuss the rapid 3D manufacturing techniques that have emerged and how they have enabled a great leap in microrobotic applications. The arrival of smart materials with inherent functionalities has propelled microrobots to great complexity and complex applications. We focus on which materials are important for actuation and what the possibilities are for supplying the required energy. Furthermore, we provide an updated view of a new generation of microrobots in terms of both materials and fabrication technology. While two-photon lithography may be the state-of-the-art technology at the moment, in terms of resolution and design freedom, new methods such as two-step are on the horizon. In the more distant future, innovations like molecular motors could make microscale robots redundant and bring about nanofabrication.

The present study aimed to investigate how playing positions differ in specific body composition variables in professional soccer players with respect to specific field zones and tactical lines. Five hundred and six Serie A and B professional soccer players were included in the study and analyzed according to their playing positions: goalkeepers (GKs), central backs (CBs), fullbacks (FBs), central midfielders (MIDs), wide midfielders (WMs), attacking midfielders (AMs), second strikers (SSs), external strikers (ESs), and central forwards (CFs), as well as their field zones (central and external) and tactical lines (defensive, middle, and offensive). Anthropometrics (stature and body mass) of each player were recorded. Then, body composition was obtained by means of bioelectric impedance analysis (BIA). GKs and CFs were the tallest and heaviest players, with no differences from each other. Likewise, GKs and CFs, along with CBs, were apparently more muscular (for both upper and lower limbs) and fatter at the same time compared with the other roles. Overall, players of the defensive line (CBs and FBs), along with those playing in central field zones (CBs, MIDs, AMs, SSs, and CFs), were significantly (p < 0.05) superior in almost all anthropometric and body composition variables than those of middle and offensive line and external zones, respectively.

Ankle-brachial index and arterial stiffness are associated with leg function in the elderly and in patients with peripheral arterial disease. Little is known about the meaning of these parameters in young and trained subjects and how they are related to physical performance. The main objective was to evaluate the mediating role of arterial stiffness and ankle-brachial index in physical performance. In a cross-sectional, case-control study, 240 male athletes were consecutively enrolled from the Laboratory of Cardiology and Sports Medicine, “G. d’Annunzio” University (Italy). All the subjects underwent the examination protocol for the annual medical evaluation for sport participation. Soccer (football) players compared to runners showed a lower level of ankle-brachial index, higher arterial stiffness, and lower systolic and diastolic blood pressure. In the treadmill stress test, soccer players compared to runners showed a greater maximal aerobic capacity. Differences in cardiovascular performance between soccer players and runners were mediated by better arterial stiffness and low level of ankle-brachial index; the estimated effect was 0.11 ± 0.05 and 0.24 ± 0.06, respectively. Vigorous strength training drops blood pressure and increases arterial stiffness. Taken together, our findings would seem to suggest that ABI and CAVI could be used as markers for athletes’ performance.

L’article estudia alguns aspectes de la vida i de l’obra del catalanòfil italià Cesare Giardini (Bolonya, 1893 – Milà, 1970) fins a la dècada dels anys trenta del segle xx. La seva activitat inicial d’actor li va permetre viatjar a Barcelona el 1912 amb la companyia de la gran actriu italiana Lyda Borelli. Es va quedar a Barcelona durant un mes i, arran d’aquesta visita, va poder contactar amb alguns representants de la cultura catalana, tot i que encara era molt jove. A partir dels anys vint començà a treballar a l’editorial Alpes de Milà, que va publicar traduccions d’obres catalanes a l’italià, com ara La nazionalità catalana, d’Enric Prat de la Riba (1924). La seva tasca de difusió de la literatura catalana es va desenvolupar també mitjançant moltíssims articles a diferents diaris i revistes durant tota la seva trajectòria vital. Va publicar l’any 1926, amb l’editorial de Piero Gobetti (Edizioni del Baretti), una antologia de poetes catalans, que va reeditar amb pocs canvis l’any 1950.

Polymers crosslinked via furan/maleimide thermo-reversible chemistry have been extensively explored as reprocessable and self-healing thermosets and elastomers. For such applications, it is important that the thermo-reversible features are reproducible after many reprocessing and healing cycles. Therefore, side reactions are undesirable. However, we have noticed irreversible changes in the mechanical properties of such materials when exposing them to temperatures around 150 °C. In this work, we study whether these changes are due to the self-reaction of maleimide moieties that may take place at this rather low temperature. In order to do so, we prepared a furan-grafted polyketone crosslinked with the commonly used aromatic bismaleimide (1,1′-(methylenedi-4,1-phenylene)bismaleimide), and exposed it to isothermal treatments at 150 °C. The changes in the chemistry and thermo-mechanical properties were mainly studied by infrared spectroscopy, 1H-NMR, and rheology. Our results indicate that maleimide self-reaction does take place in the studied polymer system. This finding comes along with limitations over the reprocessing and self-healing procedures for furan/maleimide-based reversibly crosslinked polymers that present their softening (decrosslinking) point at relatively high temperatures. On the other hand, the side reaction can also be used to tune the properties of such polymer products via in situ thermal treatments.

In questo saggio si fa una riflessione sull’opera di Joan Sales Incerta glòria e particolarmente si vede le conessione tra filologia, storia e traduzione. This article makes a reflection on the work of Joan Sales, Incerta glòria, and it particularly affects the connection between philology, history and translation.

Homogeneous water dispersions of multi-walled carbon nanotubes (MWCNTs) were prepared by ultrasonication in the presence of an amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA) copolymer. The ability of PS-b-PAA to disperse and stabilize MWCTNs was investigated by UV-vis, SEM and zeta potential. The results show that the addition of a styrene block to PAA enhances the dispersion efficiency of the graphitic filler compared to pure PAA, possibly due to the nanotube affinity with the polystyrene moiety. Notably, the dispersions show an evident pH-responsive behavior, being MWCNTs reaggregation promoted in basic environment. It is worth noting that the responsive character is maintained in solid composites obtained by drop casting, thus indicating potential applications in sensing.

Novel, multipurpose terpolymers based on styrene (PS), tert-butyl methacrylate (tBMA) and glycidyl methacrylate (GMA), have been synthesized via Atom Transfer Radical Polymerization (ATRP). Post-synthetic modification with 1-pyrenemethylamine (AMP) allows non-covalent functionalization of carbon nanotubes, eventually yielding a conductive nanocomposite materials capable of interacting with different Volatile Organic Compounds (VOCs) by electrical resistance variation upon exposure. Moreover, facile hydrolysis of the tBMA group yields polyelectrolytic macrosurfactants with remarkable thickening properties for promising applications in water solution, such as Enhanced Oil Recovery (EOR).

During the past half-century, the prefix “nano„ attached to several words, such as “technology„, “motors„, “device„, and so on has denoted cutting-edge research fields and topics at the forefront of classical scientific disciplines. Possible application fields have been frequently evoked, even if real-life examples are still difficult to find. The present review analyzes how nanotechnology is utilized in enhanced oil recovery (EOR) processes so as to increase the efficiency of mature oilfields. Nanotechnology in EOR is classified into three categories: nanoparticles/nanofluids, nanoemulsions, and nanocatalysts. The advantages at the nanoscale are also described and discussed, including an overview of manufacturing methods as well as the concerns about their possible environmental impacts. Clearly, nanotechnology has the potential to boost EOR techniques, although there are still many questions and drawbacks to be tackled.

Conductive rubber nanocomposites were prepared by dispersing conductive nanotubes (CNT) in thermoreversibly cross-linked ethylene propylene rubbers grafted with furan groups (EPM-g-furan) rubbers. Their features were studied with a strong focus on conductive and mechanical properties relevant for strain-sensor applications. The Diels-Alder chemistry used for thermoreversible cross-linking allows for the preparation of fully recyclable, homogeneous, and conductive nanocomposites. CNT modified with compatible furan groups provided nanocomposites with a relatively large tensile strength and small elongation at break. High and low sensitivity deformation experiments of nanocomposites with 5 wt % CNT (at the percolation threshold) displayed an initially linear sensitivity to deformation. Notably, only fresh samples displayed a linear response of their electrical resistivity to deformations as the resistance variation collapsed already after one cycle of elongation. Notwithstanding this mediocre performance as a strain sensor, the advantages of using thermoreversible chemistry in a conductive rubber nanocomposite were highlighted by demonstrating crack-healing by welding due to the joule effect on the surface and the bulk of the material. This will open up new technological opportunities for the design of novel strain-sensors based on recyclable rubbers.

Erectile dysfunction (ED) is one of the complications associated with pelvic surgery. The significance of ED as a complication following pelvic surgery, especially radical prostatectomy (RP), lies in the negative impact that it has on patients’ sexual and overall life. In the literature, rates of ED following RP range from 25% to 100%. Such variety is associated with pelvic dissection and conservation of neurovascular structures. Another important factor impacting on postoperative ED is the preoperative erectile function of the patient. Advances in the knowledge of pelvic anatomy and pathological mechanisms led to a refinement of pelvic surgical techniques, with attention to the main structures that if damaged compromise erectile function. These improvements resulted in lower postoperative ED rates and better erectile recovery, especially in patients undergoing RP. Furthermore, surgery alone is not sufficient to prevent this complication, and thus, several medical strategies have been tested with the aim of maximizing erectile function recovery. Indeed it seems that prevention of postoperative ED must be addressed by a multimodal approach. The aim of this review is to give a picture of recent knowledge, novel techniques and therapeutic approaches in order to reach the best combination of treatments to reduce the rate of ED after pelvic surgery.

Type C hepatic encephalopathy (Type C HE) is a major and complex neurological condition that occurs following chronic liver failure. The molecular basis of Type C HE remains elusive. Type C HE is characterized by mental confusion, cognitive and motor disturbances. The presence of Alzheimer type II astrocytes (AT2A) is the key histopathological finding observed in Type C HE. However, nothing is currently known regarding AT2A development and its involvement in cognitive, and motor deficits in Type C HE. We, therefore, examined in rats the mechanisms by which liver failure contributes to the progression of AT2A, and its role in the development of cognitive and motor deficits in thioacetamide (TAA) model of Type C HE. We and others earlier reported increased oxidative/nitrosative stress (ONS), JNK1/2, and cMyc activation in ammonia-treated astrocyte cultures, as well as in brains from chronic liver failure. We now found increased levels of astrocytic glia maturation factor (GMF, a factor strongly implicated in neuroinflammation), as well as various inflammatory factors (IL-1β, TNF-α, IL-6, MMP-3, COX2, CXCL1, and PGE2), and reduced levels of GFAP and increased levels of aggregated nuclear protein Lamin A/C in rat brain cortex post-chronic liver failure. We also found increased levels of GMF and inflammatory factors (MMP-3, COX2, CXCL1, and PGE2) in astrocytes post-ammonia treatment in vitro. Additionally, pharmacological inhibition of upstream signaling of GMF (ONS, JNK1/2, and cMyc) or GMF inhibitors W-7 and trifluoperazine significantly reduced the levels of inflammatory factors, the number of AT2A cells, as well as the cognitive and motor deficits in TAA-treated rats. Increased levels of GMF were also identified in human post-mortem brain sections. These findings strongly suggest that increased levels of astrocytic GMF due to elevated levels of ONS, JNK1/2, and cMyc and the subsequent inflammation contribute to the development of AT2A and the consequent cognitive, and motor deficits in chronic liver failure., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Advances in assisted reproductive technologies have enabled postmenopausal women to achieve pregnancy beyond their reproductive lifespan. Although rare, these pregnancies are challenging and require a multidisciplinary approach due to the higher prevalence of medical comorbidities in this population. The placenta accreta spectrum is characterized by an abnormal invasion of chorionic villi into the myometrium. Risk factors associated with the placenta accreta spectrum include prior uterine surgeries, advanced maternal age, multiparity, in vitro fertilization, and placenta previa. We present a case of a 59-year-old postmenopausal woman with chronic hypertension, stage II chronic kidney injury, and superimposed pre-eclampsia who underwent cesarean delivery complicated by suspected focal placenta accreta. Histopathological examination revealed significant deviations from normative placental architecture, emphasizing the invasion of the villi. Further, congested blood vessels and the presence of inflammatory cells, along with heightened collagen deposition, suggest an underlying pathological process affecting placental health. These findings underscore a perturbation of placental homeostasis, emphasizing the necessity for further investigation into the mechanisms contributing to placental pathology in postmenopausal pregnancies., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Hajjar et al.)

Women are encouraged to have a yearly mammogram and in addition to screening for breast cancer, the radiologist reports the patient's breast density. High breast density increases a woman's risk of developing breast cancer. The number of chest computed tomography (CT) scans performed each year is increasing. Chest CT scans for lung cancer screening in high-risk patients are the standard of care. Important additional findings can be identified on these exams including coronary artery calcifications, thyroid nodules, and breast density. Our previous research has shown that breast density can be reliably graded on chest CT and is comparable to mammographic grading. However, the inter-reader agreement was higher for chest CT. It is important that thoracic radiologists include the grading of breast density in their chest CT reports. According to mammography literature, this information has proven to be helpful for early detection of breast cancer. Federal legislation recommends notifying both providers and patients about breast density on mammography and so it follows that if we see the same information on chest CT, we should report it so that at the very least the clinician can encourage their patient to have a routine mammogram., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://tbcr.amegroups.com/article/view/10.21037/tbcr-23-36/coif). MMS reports grant funding from Boehringer Ingelheim and Genentech, research with Bioclinica, LungLifeAI, AbbVie, and speaking with Peer View and France Foundation. KMC served as an advisor for Cardinal Health Oncology Summits. The other authors have no conflicts of interest to declare., (2023 Translational Breast Cancer Research. All rights reserved.)

Background: We report the results of our retrospective analysis of the ability of standard chest CT scans to correctly diagnose cancer in the breast. Methods: Four hundred and fifty-three consecutive women with chest CT scans (contrast and non-contrast) preceding mammograms within one year comprise the study population. All chest CT images were reviewed by an experienced fellowship-trained chest radiologist and mammograms by an experienced fellowship-trained mammographer without the benefit of prior or ancillary studies; only four mammographic views were included for analysis. The size, location, and shape of breast masses were documented; on CT, the average Hounsfield units were measured. On both imaging modalities, the presence of lymphadenopathy, architectural distortion, skin thickening, and microcalcifications were recorded. Ultimately, the interpreting radiologist was asked to decide if a biopsy was indicated, and these recommendations were correlated with the patient’s outcome. Findings: Nineteen of four hundred and fifty-three patients had breast cancer at the time of the mammography. Breast masses were the most common finding on chest CT, leading to the recommendation for biopsy. Hounsfield units were the most important feature for discerning benign from malignant masses. CT sensitivity, specificity, and accuracy of CT for breast cancer detection was 84.21%, 99.3%, and 98.68% compared to 78.95%, 93.78%, and 93.16% for four-view mammography. Chest CT scans with or without contrast had similar outcomes for specificity and accuracy, but sensitivity was slightly less without contrast. Chest CT alone, without the benefit of prior exams and patient recall, correctly diagnosed cancer with a p-value of <0.0001 compared to mammography with the same limitations. Conclusion: Chest CT accurately diagnosed breast cancer with few false positives and negatives and did so without the need for patient recall for additional imaging.