Search

Most mapping methods for Arctic land cover are pixel-based techniques for low resolution data, and have limitations in mapping land cover heterogeneity over complex Arctic polygonal tundra terrain. In this study, we developed a hybrid object-based approach for Arctic coastal tundra mapping using very high resolution optical satellite imagery by combining results from semi-automatic water/land separation, texture analysis based on local binary pattern (LBP), and image classification via Random Forests (RF). The method was applied for coastal land cover mapping in a study site in Tuktoyaktuk, Northwest Territories, Canada using Pleiades satellite data. Results from pixel-based Maximum Likelihood Classifier (MLC), segment-based MLC, pixel-based RF, and segment-based RF were compared with the proposed method. The hybrid method outperformed other approaches and achieved an overall accuracy of 88% for 9 classes. In particular, it has successfully identified unique land cover types of Ice-Wedge Polygons, Wetland (inundated low-lying tundra and marsh with water ponds), with both producer's and user's accuracy over 91%. Results from this study indicate that the developed hybrid method is suitable to be applied for mapping Arctic coastal ecosystems, and confirms the feasibility of proper use of LBP at segment level for mapping complex environment. [ABSTRACT FROM AUTHOR]

Ecosystems are valuable as well as aesthetic. The natural functions of ecosystems can have profound effects on the economy, and human and wildlife health. The aggregate value of these 'ecosystem services' may far exceed the economic value derived from resource extraction or industrial development, especially when considering the costs of restoring ecosystems. There is increasing interest, therefore, in monitoring and protecting ecosystems, and accounting for the biodiversity and services they provide. In 2010, Canada undertook a review of ecosystem status and trends that identified the regions and ecosystems where management is most urgently needed. The authors concluded that more large-scale, long-term, standardized, and spatially complete information is needed for effective monitoring and management. Satellite-based earth observation (EO) tools were seen as a means of addressing this information need. In a separate exercise, a list of priority questions for conservation policy and management at a national level was produced: the resolution of three-quarters of those questions appears to depend on EO tools to a significant or critical extent. Canada has a long and successful history in all aspects of earth observation, placing it amongst the leaders in the international remote sensing community. Whereas the need for measuring ecosystem services to humans and wildlife is increasingly important, the challenges for doing so are increasingly significant and the technology required is increasingly complex. Overcoming these challenges is necessary to address emerging conservation priorities including measurement of ecosystem attributes to support habitat conservation for Species at Risk, measuring functional capacity of ecosystems to mitigate effects of climate change, monitoring and mitigating effects of resource extraction, and supporting industrial development in Canada's north. Addressing emerging priorities requires dialogue among ecologists and decision makers, coordinated at regional and national scales, and requires drawing on the best EO technologies and infrastructure available. This review highlights the urgency of a coordinated approach for innovative applications of EO tools toward conservation and discusses some of the key elements that might be included and opportunities and challenges that might be encountered, by such an approach. [ABSTRACT FROM AUTHOR]

ABSTRACT Double-crested cormorant ( Phalacrocorax auritus) populations have increased greatly across North America. The interior North America subpopulation is the largest with many birds nesting on the Laurentian Great Lakes. Lake Erie supports a large number of breeding pairs that nests primarily on islands in the western basin of the lake. These islands also harbor many rare plant species constituting some of the last vestiges of Carolinian plant communities in Canada. Nesting cormorants can adversely affect the plant communities on the islands on which they nest. Annual ground censuses were conducted from 1979 to 2011 to assess temporal changes in the density of nesting cormorants on 3 islands in western Lake Erie. We used aerial photographs taken over a maximum 16-year span to assess changes in forest cover on these island ecosystems. We observed declines in forest cover on all 3 islands ranging from 47% to 85%. Trends among islands differed reflecting differences in cormorant colonization histories and the degree to which cormorants were managed, thereby influencing nest densities. Islands without cormorant management had cormorant nest densities ranging from approximately 300-500 nests/ha and forests declined continuously through time. On the island where cormorants were culled, nest densities were lower (approx. 200 nests/ha) and forest decline stabilized. © 2014 The Wildlife Society. [ABSTRACT FROM AUTHOR]

The generation of geospatial thematic information for managing and monitoring Canada's boreal ecosystem is essential for researchers, land managers, and policy makers. Canada's boreal region is a vast mosaic of forests, wetlands, rivers, and lakes, but anthropogenic disturbances have impacted these ecosystems resulting in habitat loss, fragmentation, and threats to biodiversity. Across Canada various geospatial datasets representing anthropogenic disturbance exist for timber harvesting, hydro-electric activity, settlement, and oil and gas activities; however, these products often vary in scale, attributes, time period, and mapping technique. Driven by the need for national data as part of the 2011 boreal caribou science assessment, a standardized methodology was developed and implemented to create a single geospatial dataset representing anthropogenic disturbances across a significant portion of Canada's boreal ecosystem. The boreal ecosystem anthropogenic disturbances data are a vector disturbance dataset of individual linear and polygonal disturbance types that were manually collected through the interpretation of 2008-2010 Landsat imagery at a 1:50 000 viewing scale. Summary results identified a total polygonal anthropogenic disturbance footprint of approximately 24 million ha with forest cutblocks accounting for more than 60% of mapped polygonal disturbance. Linear disturbance features across the boreal total approximately 600 000 km with roads and seismic exploration lines contributing to more than 80% of the mapped linear disturbances. [ABSTRACT FROM AUTHOR]

This paper presents development of a multivariate forest structural complexity index based on relationships between field-based structural variables and geospatial data. Remote sensing has been widely used to model individual forest structural attributes at many scales. As opposed to, or in addition to, individual structural parameters such as leaf area index or tree height, overall structural complexity information can enhance forest inventories and provide a variety of information to forest managers, including identifying damage and disturbance as well as indicators of habitat or biodiversity. In this study, a multivariate modelling technique, redundancy analysis, was implemented to derive a model incorporating both horizontal and vertical structural attributes as predicted by an ensemble of high-resolution multispectral airborne imagery and topographic variables. The first redundancy analysis axis of the final model explained 35% of the total variance of the field variables and was used as the complexity index. With a root mean squared error of 19.9%, the model was capable of differentiating four to five relative levels of complexity. This paper presents the forest ecological and modelling aspects of the research. A related paper presents the remote sensing aspects, including application of the model to map predicted structural complexity, map validation, and testing of the method at multiple scales. Cet article présente le développement d'un indice multivarié de complexité de la structure de la forêt basé sur les relations entre des variables structurales mesurées sur le terrain et des données géospatiales. La télédétection a été largement utilisée pour modéliser les attributs structuraux de la forêt à plusieurs échelles. Contrairement à, ou en plus, des paramètres structuraux individuels comme l'indice de surface foliaire ou la hauteur des arbres, une information globale au sujet de la complexité structurale peut améliorer les inventaires forestiers et fournir une variété de renseignements aux aménagistes forestiers, incluant l'identification des dommages et des perturbations aussi bien que des indicateurs d'habitat ou de biodiversité. Dans cette étude, une technique de modélisation multivariée, l'analyse de redondance, a été appliquée pour dériver un modèle qui incorpore des attributs, tant horizontaux que verticaux de la structure, prédits par un ensemble d'images aériennes multispectrales à haute résolution et des variables topographiques. Le premier axe de l'analyse de redondance du modèle final expliquait 35 % de la variance totale des variables terrain et a été utilisé comme indice de complexité. Avec une erreur quadratique moyenne de 19,9 %, le modèle était capable de différencier quatre à cinq niveaux de complexité. Cet article présente les aspects de la recherche reliés à la modélisation et à l'écologie forestière. Un autre article présente les aspects reliés à la télédétection, incluant l'application du modèle pour cartographier la complexité structurale prédite, la validation de la cartographie et l'essai de la méthode à plusieurs échelles. [ABSTRACT FROM AUTHOR]

Abstract: Remote sensing has been widely used for modelling and mapping individual forest structural attributes, such as LAI and stem density, however the development and evaluation of methods for simultaneously modelling and mapping multivariate aspects of forest structure are comparatively limited. Multivariate representation of forest structure can be used as a means to infer other environmental attributes such as biodiversity and habitat, which have often been shown to be enhanced in more structurally diverse or complex forests. Image-based modelling of multivariate forest structure is useful in developing an understanding of the associations between different aspects of vertical and horizontal structure and image characteristics. Models can also be applied spatially to all image pixels to produce maps of multivariate forest structure as an alternative to sample-based field assessment. This research used high spatial resolution multispectral airborne imagery to provide spectral, spatial, and object-based information in the development of a model of multivariate forest structure as represented by twenty-four field variables measured in plots within a temperate hardwood forest in southern Quebec, Canada. Redundancy Analysis (RDA) was used to develop a model that explained a statistically significant proportion of the variance of these structural attributes. The resulting model included image variables representing mostly within-crown and within-shadow brightness variance (texture) as well as elevation, taken from a DEM of the study area. It was applied spatially across the entire study area to produce a continuous map of predicted multivariate forest structure. Bootstrapping validation of the model provided an RMSE of 19.9%, while independent field validation of mapped areas of complex and simple structure showed accuracies of 89% and 69%, respectively. Multiscale testing using resampled imagery suggested that the methods could possibly be used with current pan-sharpened, or future sub-metre resolution, multispectral satellite imagery, which would provide much greater spatial coverage and reduced image processing compared to airborne imagery. [Copyright &y& Elsevier]

Abstract: Modelling and mapping of hooded warbler (Wilsonia citrina) nesting habitat in forests of southern Ontario were conducted using Ikonos and Landsat data. The study began with an analysis of skyward hemispherical photography to determine canopy characteristics associated with nest sites. It showed that nest sites had significantly less overhead canopy cover and larger maximum gap size than in non-nest areas. These findings led to the hypothesis that brightness variability in high to moderate resolution remotely sensed imagery may be greater at nest sites than in non-nest areas due to larger shadows and greater shadow variability related to these gap characteristics. This was confirmed when, in addition to some spectral band brightness variables, several image texture and spectrally unmixed fraction (shadow, bare soil) variables were found to be significantly different for nest and non-nest sites in Ikonos and Landsat imagery. These significantly different variables were used in maximum likelihood classification (MLC) and logistic regression (LR) to produce maps of potential nesting habitat. Mapping was conducted with Ikonos and Landsat in a local area where most known nest sites occur, and regionally using Landsat data for almost all of the hooded warbler range in southern Ontario. For the local area mapping using Ikonos data, a posteriori probabilities for both the MLC and LR methods showed that about 62% of the nest sites set aside for validation had been classified with high probability (p >0.70) in the nest class. MLC mapping accuracy was 70% for the validation nest sites and 87% of validation nest sites were within 10 m of classified nesting habitat, a distance approximately equivalent to expected positional error in the data. LR accuracy was slightly lower. Nest site MLC mapping accuracy in the local area using Landsat data was 87% but the map was much coarser due to the larger pixel size. Regional mapping with Landsat imagery produced lower classification accuracy due to high errors of commission for the habitat class. This resulted from a poor spatial distribution and low number of observations of nest sites throughout the region compared to the local area, while the non-nest site data distribution was too narrow, having been defined and assessed (using standard accepted methods) as areas with no ground shrubs. If either of these problems can be ameliorated, regional mapping accuracy may improve. [Copyright &y& Elsevier]

During a time of rapid urban growth and development, it is becoming ever more important to monitor the carbon fluxes of our cities. Unlike Canada's commercially managed forests that have a long history of inventory and modelling tools, there is both a lack of coordinated data and considerable uncertainty on assessment procedures for urban forest carbon. Nonetheless, independent studies have been carried out across Canada. To improve upon Canada's federal government reporting on carbon storage and sequestration by urban forests, this study builds on existing data to develop an updated assessment of carbon storage and sequestration for Canada's urban forests. Using canopy cover estimates derived from ortho-imagery and satellite imagery ranging from 2008 to 2012 and field-based urban forest inventory and assessment data from 16 Canadian cities and one US city, this study found that Canadian urban forests store approximately 27,297.8 kt C (− 37%, + 45%) in above and belowground biomass and sequester approximately 1497.7 kt C year−1 (− 26%, + 28%). In comparison with the previous national assessment of urban forest carbon, this study suggested that in urban areas carbon storage has been overestimated and carbon sequestration has been underestimated. Maximizing urban forest carbon sinks will contribute to Canada's mitigation efforts and, while being a smaller carbon sink compared to commercial forests, will also provide important ecosystem services and co-benefits to approximately 83% of Canadian people. [ABSTRACT FROM AUTHOR]

Landsat is a fundamental data source for understanding historical change and its effect on environmental processes. In this research we test shallow and deep convolution neural networks (CNNs) for Landsat image super-resolution enhancement, trained using Sentinel-2, in three study sites representing boreal forest, tundra, and cropland/woodland environments. The analysis sought to assess baseline performance and determine the capacity for spatial and temporal extension of the trained CNNs. This is not a data fusion approach and a high-resolution image is only needed to train the CNN. Results show improvement with the deeper network generally achieving better results. For spatial and temporal extension, the deep CNN performed the same or better than the shallow CNN, but at greater computational cost. Results for temporal extension were influenced by change potentiality reducing the performance difference between the shallow and deep CNN. Visual examination revealed sharper images regarding land cover boundaries, linear features, and within-cover textures. The results suggest that spatial enhancement of the Landsat archive is feasible, with optimal performance where CNNs can be trained and applied within the same spatial domain. Future research will assess the enhancement on time series and associated land cover applications. [ABSTRACT FROM AUTHOR]

Agriculture is a primary factor underlying world-wide declines in biodiversity. However, different agricultural systems vary in their effects depending on their resemblance to the natural ecosystem, coverage across the landscape, and operational intensity. We combined data from the North American Breeding Bird Survey with remotely sensed measures of crop type and linear woody feature (LWF) density to study how agricultural type, woody structure and crop heterogeneity influenced the avian community at landscape scales across a broad agricultural region of eastern Canada. Specifically, we examined whether 1) avian diversity and abundance differed between arable crop agriculture (e.g., corn, soy) and forage (e.g., hay) and pastoral agriculture, 2) whether increasing the density of LWF enhances avian diversity and abundance, and 3) whether increasing the heterogeneity of arable crop types can reduce negative effects of arable crop amount. Avian diversity was lower in landscapes dominated by arable crop compared to forage agriculture likely due to a stronger negative correlation between arable cropping and the amount of natural land cover. In contrast, total avian abundance did not decline with either agricultural type, suggesting that species tolerant to agriculture are compensating numerically for the loss of non-tolerant species. This indicates that bird diversity may be a more sensitive response than bird abundance to crop cover type in agricultural landscapes. Higher LWF densities had positive effects on the diversity of forest and shrub bird communities as predicted. Higher crop heterogeneity did not reduce the negative effects of high crop amount as expected except for wetland bird abundance. In contrast, greater crop heterogeneity actually strengthened the negative effects of high crop amount on forest bird abundance, shrub-forest edge bird diversity and total bird diversity. We speculate that this was due to negative correlations between crop heterogeneity and the amount of shrub and forest habitat patches in crop-dominated landscapes in our study region. The variable response to crop heterogeneity across guilds suggests that policies aimed at crop diversification may not enhance avian diversity on their own and that management efforts aimed at the retention of natural forest and shrub patches, riparian corridors, and hedge-rows would be more directly beneficial. [ABSTRACT FROM AUTHOR]

The Random Forest algorithm was used to classify 86 Wide Fine Quadrature Polarized RADARSAT-2 scenes, five Landsat 5 scenes, and a Digital Elevation Model covering an area approximately 81,000 km² in size, and representing the entirety of Dease Strait, Coronation Gulf and Bathurst Inlet, Nunavut. The focus of this research was to assess the potential to operationalize shoreline sensitivity mapping to inform oil spill response and contingency planning. The impact of varying the training sample size and reducing model data load were evaluated. Results showed that acceptable accuracies could be achieved with relatively few training samples, but that higher accuracies and greater probabilities of correct class assignment were observed with larger sample sizes. Additionally, the number of inputs to the model could be greatly reduced without impacting overall performance. Optimized models reached independent accuracies of 91% for seven land cover types, and classification probabilities between 0.77 and 0.98 (values for latter represent per-class averages generated from independent validation sites). Mixed results were observed when assessing the potential for remote predictive mapping by simulating transferability of the model to scenes without training data. [ABSTRACT FROM AUTHOR]

With increasing ship traffic and natural resource extraction in the Canadian Arctic, the chance of an oil spill occurring is steadily increasing. Oil deposited in the marine environment will impact the ocean, and as it is washed onto shore many species and their habitats. In 2009, Environment Canada initiated a project to produce baseline coastal information required for operational prioritization in the event of a marine oil spill in the Canadian Arctic. Earth observation data can potentially be used to improve on traditional mapping methods. RADARSAT-2 C-band data and geotagged videography were collected for selected sites in the Canadian Arctic. Object-based classification was compared to pixel-based classification using two of these pilot sites, Richards Island (Northwest Territories) and Ivvavik (Yukon Territory). The object-based classification achieved an overall accuracy of 74% at Richards Island and 63% at Ivvavik, whereas the pixel-based reached 73% at both sites. To test transferability, the classifiers developed at Richards Island were applied to Ivvavik. In this case, the object-based classification achieved an overall accuracy of 78% and the pixel-based reached 71%. Results showed that characterizing shorelines in the Arctic using Earth observation data for oil spill cleanup response activities is possible. [ABSTRACT FROM AUTHOR]

We investigated the potential of using Synthetic Aperture Radar (SAR) imagery from three different frequencies: X-, C-, and L-band, to characterize coastal wetlands in the Great Lakes. Three sets of SAR data acquired over the Bay of Quinte, Ontario, Canada between 2016 and 2018 from Radarsat-2, 2016 from TerraSAR-X, and 2018 from ALOS-2 satellites were processed using small baseline subset (SBAS) Interferometric SAR (InSAR) techniques to provide maps of surface changes in marshes and swamps. Results showed that SAR backscatter and coherence were sensitive to sensor characteristics (frequency, polarization, incidence angle, acquisition interval), changes in water level, and phenology. InSAR time series observations were evaluated using measurements from water level loggers based on correlation and root mean square error (RMSE) from a linear regression model. Correlation between InSAR measurements and water level changes in the field varied from −1 to 1 depending on the site, type of wetland vegetation, and incidence angle. Although results from some sensor modes provided good correlation (0.77–1) at a few locations, the low fringe rate and large RMSE between 4 and 64 cm indicated that InSAR observations of water level changes in the dynamic wetland environment were generally underestimated. [ABSTRACT FROM AUTHOR]

The purpose of this research was to develop a state of science synthesis of remote sensing technologies that could be used to track changes in Great Lakes coastal vegetation for the Great Lakes-St. Lawrence River Adaptive Management (GLAM) Committee. The mapping requirements included a minimum mapping unit (MMU) of either 2 × 2 m or 4 × 4 m, a digital elevation model (DEM) accuracy in x and y of 2 m, a "z" value or vertical accuracy of 1–5 cm, and an accuracy of 90% for the classes of interest. To determine the appropriate remote sensing sensors, we conducted an extensive literature review. The required high degree of accuracy resulted in the elimination of many of the remote sensing sensors used in other wetland mapping applications including synthetic aperture radar (SAR) and optical imagery with a resolution >1 m. Our research showed that remote sensing sensors that could at least partially detect the different types of wetland vegetation in this study were the following types: (1) advanced airborne "coastal" Airborne Light Detection and Ranging (LiDAR) with either a multispectral or a hyperspectral sensor, (2) colour-infrared aerial photography (airplane) with (optimum) 8 cm resolution, (3) colour-infrared unmanned aerial vehicle (UAV) photography with vertical accuracy determination rated at 10 cm, (4) colour-infrared UAV photography with high vertical accuracy determination rated at 3–5 cm, (5) airborne hyperspectral imagery, and (6) very high-resolution optical satellite data with better than 1 m resolution. [ABSTRACT FROM AUTHOR]

We compared traditional spatial filters and multi-temporal filters to remove speckle from synthetic aperture radar (SAR) data for mapping Phragmites australis. SAR constellations, with more rapid revisit capability, allow one to generate stacks of SAR data and to use multi-temporal filters for speckle reduction. GAMMA software offers multi-temporal filters for SAR processing, two of which we compared to the traditional Enhanced Lee and the Lee filters. We evaluated the filters using three criteria: (1) visual inspection, (2) signal level ratio, and (3) the equivalent number of looks (ENL). The results of this study show that multi-temporal filters were able to reduce speckle from areas of surface water and land, as well as to improve the detection of Phragmites patches due to preserving the resolution and texture which helped in the detection of the patch boundaries. The signal level ratio was approximately 1.0 with the GAMMA Multi-temporal filter and approximately 0.9 with the other filters. The enhanced Lee and the two multi-temporal filters produced an equal ENL of about 6. However, due to small patch sizes and backscatter similarity with cattails and other cover types Phragmites patches were difficult to separate from other types of flooded vegetation with C-HH intensity only. [ABSTRACT FROM AUTHOR]

Methods for effective wetland monitoring are needed to understand how ecosystem services may be altered from past and present anthropogenic activities and recent climate change. The large extent of wetlands in many regions suggests remote sensing as an effective means for monitoring. Remote sensing approaches have shown good performance in local extent studies, but larger regional efforts have generally produced low accuracies for detailed classes. In this research we evaluate the potential of deep-learning Convolution Neural Networks (CNNs) for wetland classification using Landsat data to bog, fen, marsh, swamp, and water classes defined by the Canada Wetland Classification System (CWCS). The study area is the northern part of the forested region of Alberta where we had access to two reference data sources. We evaluated ResNet CNNs and developed a Multi-Size/Scale ResNet Ensemble (MSRE) approach that exhibited the best performance. For assessment, a spatial extension strategy was employed that separated regions for training and testing. Results were consistent between the two reference sources. The best overall accuracy for the CWCS classes was 62–68%. Compared to a pixel-based random forest implementation this was 5–7% higher depending on the accuracy measure considered. For a parameter-optimized spatial-based implementation this was 2–4% higher. For a reduced set of classes to water, wetland, and upland, overall accuracy was in the range of 86–87%. Assessment for sampling over the entire region instead of spatial extension improved the mean class accuracies (F1-score) by 9% for the CWCS classes and for the reduced three-class level by 6%. The overall accuracies were 69% and 90% for the CWCS and reduced classes respectively with region sampling. Results in this study show that detailed classification of wetland types with Landsat remains challenging, particularly for small wetlands. In addition, further investigation of deep-learning methods are needed to identify CNN configurations and sampling methods better suited to moderate spatial resolution imagery across a range of environments. [ABSTRACT FROM AUTHOR]

In this study, a new method is proposed for semi-automated surface water detection using synthetic aperture radar data via a combination of radiometric thresholding and image segmentation based on the simple linear iterative clustering superpixel algorithm. Consistent intensity thresholds are selected by assessing the statistical distribution of backscatter values applied to the mean of each superpixel. Higher-order texture measures, such as variance, are used to improve accuracy by removing false positives via an additional thresholding process used to identify the boundaries of water bodies. Results applied to quad-polarized RADARSAT-2 data show that the threshold value for the variance texture measure can be approximated using a constant value for different scenes, and thus it can be used in a fully automated cleanup procedure. Compared to similar approaches, errors of omission and commission are improved with the proposed method. For example, we observed that a threshold-only approach consistently tends to underestimate the extent of water bodies compared to combined thresholding and segmentation, mainly due to the poor performance of the former at the edges of water bodies. The proposed method can be used for monitoring changes in surface water extent within wetlands or other areas, and while presented for use with radar data, it can also be used to detect surface water in optical images. [ABSTRACT FROM AUTHOR]

Detailed information on the land cover types present and the horizontal position of the land-water interface is needed for sensitive coastal ecosystems throughout the Arctic, both to establish baselines against which the impacts of climate change can be assessed and to inform response operations in the event of environmental emergencies such as oil spills. Previous work has demonstrated potential for accurate classification via fusion of optical and SAR data, though what contribution either makes to model accuracy is not well established, nor is it clear what shorelines can be classified using optical or SAR data alone. In this research, we evaluate the relative value of quad pol RADARSAT-2 and Landsat 5 data for shoreline mapping by individually excluding both datasets from Random Forest models used to classify images acquired over Nunavut, Canada. In anticipation of the RADARSAT Constellation Mission (RCM), we also simulate and evaluate dual and compact polarimetric imagery for shoreline mapping. Results show that SAR data is needed for accurate discrimination of substrates as user's and producer's accuracies were 5-24% higher for models constructed with quad pol RADARSAT-2 and DEM data than models constructed with Landsat 5 and DEM data. Models based on simulated RCM and DEM data achieved significantly lower overall accuracies (71-77%) than models based on quad pol RADARSAT-2 and DEM data (80%), with Wetland and Tundra being most adversely affected. When classified together with Landsat 5 and DEM data, however, model accuracy was less affected by the SAR data type, with multiple polarizations and modes achieving independent overall accuracies within a range acceptable for operational mapping, at 89-91%. RCM is expected to contribute positively to ongoing efforts to monitor change and improve emergency preparedness throughout the Arctic. [ABSTRACT FROM AUTHOR]

For this research, the Random Forest (RF) classifier was used to evaluate the potential of simulated RADARSAT Constellation Mission (RCM) data for mapping landcover within peatlands. Alfred Bog, a large peatland complex in Southern Ontario, was used as a test case. The goal of this research was to prepare for the launch of the upcoming RCM by evaluating three simulated RCM polarizations for mapping landcover within peatlands. We examined (1) if a lower RCM noise equivalent sigma zero (NESZ) affects classification accuracy, (2) which variables are most important for classification, and (3) whether classification accuracy is affected by the use of simulated RCM data in place of the fully polarimetric RADARSAT-2. Results showed that the two RCM NESZs (-25 dB and -19 dB) and three polarizations (compact polarimetry, HH+HV, and VV+VH) that were evaluated were all able to achieve acceptable classification accuracies when combined with optical data and a digital elevation model (DEM). Optical variables were consistently ranked to be the most important for mapping landcover within peatlands, but the inclusion of SAR variables did increase overall accuracy, indicating that a multi-sensor approach is preferred. There was no significant difference between the RF classifications which included RADARSAT-2 and simulated RCM data. Both medium- and high-resolution compact polarimetry and dual polarimetric RCM data appear to be suitable for mapping landcover within peatlands when combined with optical data and a DEM. [ABSTRACT FROM AUTHOR]

Wynja, V.; Demers, A.-M.; Laforest, S.; Lacelle, M.; Pasher, J.; Duffe, J.; Chaudhary, B.; Wang, H., and Giles, T., 2015. Mapping coastal information across Canada's northern regions based on low-altitude helicopter videography in support of environmental emergency preparedness efforts. In the face of increasing economic opportunities in Canada's northern regions, the need to improve our state of preparedness for oil spill-related emergencies is critical. While significant efforts have been put toward documenting baseline coastal information across Canada's southern regions, there is a large information gap regarding Arctic shorelines. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities ( i.e. Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Georeferenced high-definition videography was collected during the summers of 2010 to 2012 along coastlines within six study sites across the Canadian Arctic. Detailed information describing the upper intertidal, supratidal, and backshore zones was extracted from the video and entered into a geospatial database using a data collection form. This information was used to delimit and map alongshore segments in the upper intertidal zone. Almost 15,000 km of northern shorelines were mapped, including 25 shoreline types based on the upper intertidal zone. This information will feed into a larger ongoing project focused on Arctic coastal ecosystems and oil spill response planning should the need arise. [ABSTRACT FROM AUTHOR]

Simple rules for landscape management seem elusive because different species and species groups are associated with different land cover types; a change in landscape structure that increases diversity of one group may reduce diversity of another. On the other hand, if simple landscape–biodiversity relationships do exist despite this complexity, they would have great practical benefit to conservation management. With these considerations in mind, we tested for consistent relationships between landscape heterogeneity and biodiversity in farmland (the cropped areas in agricultural landscapes), with a view to developing simple rules for landscape management that could increase biodiversity within farmland. Our measures of farmland heterogeneity were crop diversity and mean crop field size, where increases in crop diversity and/or decreases in mean field size represent increasing landscape heterogeneity. We sampled the abundance, and alpha, gamma and beta diversity of birds, plants, butterflies, syrphids, bees, carabids and spiders, in crop fields within each of 93 1 km × 1 km agricultural landscapes. The landscapes were selected to represent three gradients in landscape composition and heterogeneity: proportion of the landscape in crop, mean crop field size and Shannon crop type diversity of the farmland. We found that mean crop field size had the strongest overall effect on biodiversity measures in crop fields, and this effect was consistently negative. Based on our results we suggest that, if biodiversity conservation in crop fields is a priority, policies and guidelines aimed at reducing crop field sizes should be considered. [ABSTRACT FROM AUTHOR]

Arctic amplification is accelerating changes in sea ice regimes in the Canadian Arctic with later freeze-up and earlier melt events, adversely affecting Arctic wildlife and communities that depend on the stability of sea ice conditions. To monitor both the rate and impact of such change, there is a need to accurately measure sea ice deformation, an important component for understanding ice motion and polar climate. The objective of this study is to determine the spatial-temporal pattern of deformation over landfast ice in the Arctic using time series SAR imagery. We present Interferometric Synthetic Aperture Radar (InSAR) monitoring of Arctic landfast sea ice deformation using C-band Radarsat-2, Sentinel-1 and L-band ALOS-2 in this paper. The small baseline subset (SBAS) approach was explored to process time series observations for retrieval of temporal deformation changes along a line-of-sight direction (LOS) over the winter. It was found that temporal and spatial patterns of deformation observed from different sensors were generally consistent. Horizontal and vertical deformations were also retrieved by a multi-dimensional SBAS technique using both ascending and descending Sentinel-1 observations. Results showed a horizontal deformation in the range of −95–85 cm, and vertical deformation in the range of −41–63 cm in Cambridge Bay, Nunavut, Canada during February-April 2019. High coherence over ice from C-band was maintained over a shorter time interval of acquisitions than L-band due to temporal decorrelation. [ABSTRACT FROM AUTHOR]

The prairie region of Canada is a dynamically changing landscape in relation to past and present anthropogenic activities and recent climate change. Improving our understanding of the rate, timing, and distribution of landscape change is needed to determine the impact on wildlife populations and biodiversity, ultimately leading to better-informed management regarding requirements for habitat amount and its connectedness. In this research, we assessed the viability of an approach to detect from–to class changes designed to be scalable to the prairie region with the capacity for local refinement. It employed a deep-learning convolutional neural network to model general land covers and examined class memberships to identify land-cover conversions. For this implementation, eight land-cover categories were derived from the Agriculture and Agri-Food Canada Annual Space-Based Crop Inventory. Change was assessed in three study areas that contained different mixes of grassland, pasture, and forest cover. Results showed that the deep-learning method produced the highest accuracy across all classes relative to an implementation of random forest that included some first-order texture measures. Overall accuracy was 4% greater with the deep-learning classifier and class accuracies were more balanced. Evaluation of change accuracy suggested good performance for many conversions such as grassland to crop, forest to crop, water to dryland covers, and most bare/developed-related changes. Changes involving pasture with grassland or cropland were more difficult to detect due to spectral confusion among classes. Similarly, conversion to forests in some cases was poorly detected due to gradual and subtle change characteristics combined with confusion between forest, shrub, and croplands. The proposed framework involved several processing steps that can be explored to enhance the thematic content and accuracy for large regional implementation. Evaluation for understanding connectivity in natural land covers and related declines in species at risk is planned for future research. [ABSTRACT FROM AUTHOR]

The restoration of peatlands is critical to help reduce the effects of climate change and further prevent the loss of habitat for many species of flora and fauna. The objective of this research was to evaluate RADARSAT-2 satellite imagery and high-resolution Unmanned Aerial Systems (UASs) to determine if they could be used as surrogates for monitoring the success of peatland restoration. Areas of peatland that were being actively harvested, had been restored from past years (1994–2003), and natural shrub bog in Lac St. Jean, Quebec were used as a test case. We compared the Freeman–Durden and Touzi decompositions by applying the Bhattacharyya Distance (BD) statistic to see if the spectral signatures of restored peatland could be separated from harvested peat and natural shrub bog. We flew Unmanned Aerial Surveys (UASs) over the study site to identify Sphagnum and Polytrichum strictum, two indicator species of early peatland restoration success. Results showed that the Touzi decomposition was better able to separate the spectral signatures of harvested, restored, and natural shrub bog (BD values closer to 9). Symmetric scattering type αs1, Helicity |τ1,2,3|, a steep incidence angle, and peak growing season appear to be important for separating the spectral signatures. We had moderate success in detecting Sphagnum and Polytrichum strictum visually by using texture and pattern but were unable to use colour due to differences in sun angle and clouds during the UAS flights. Results suggest that RADARSAT-2 data using the Touzi decomposition and UAS imagery show potential for monitoring peatland restoration success over time. [ABSTRACT FROM AUTHOR]

There is limited research focusing on Interferometric Synthetic Aperture Radar (InSAR) applications in the Great Lakes coastal wetlands with large water level fluctuations. In this study, we investigated the potential of using C-band SAR data to characterize marsh wetland and monitor water level changes along the coast of the Great Lakes. InSAR analysis was conducted using Radarsat-2 and Sentinel-1 data collected at Long Point, Ontario, Canada over the period of 2016–2018. Observations indicated that both backscattering coefficients and coherence from tall plants (e.g. cattail/Phragmites), short plants (e.g. grass), and water varied with different sensor modes (incidence angles and polarizations) in response to changes in phenology, disturbance, and water level. InSAR phase changes were closely related to fluctuations in water level and flow direction. We evaluated InSAR time series observations using measurements from water level loggers based on correlation and root mean square error (RMSE). It was found that correlation between InSAR measurements and water level changes in the field varied depending on the site, type of wetland vegetation, incidence angle and polarization. Although results from some sensor modes provided good correlation at a few locations, the low fringe rate and RMSE between 9 and 28 cm indicated that InSAR observations of water level changes were generally underestimated. • Utility of C-band InSAR is confirmed for monitoring water level in the Great Lakes. • SAR images are sensitive to marsh vegetation phenology and manmade changes. • Correlation between InSAR and field water level measurements varies in marsh. • High coherence is consistent in cattail and Phragmites dominated marsh areas. • C-band InSAR interferogram is saturated in high water level changes. [ABSTRACT FROM AUTHOR]

Terricolous macrolichens are an important food source for caribou (Rangifer tarandus) and can greatly influence their movement, distribution and demography over time. Mapping the spatial distribution and cover of macrolichens with remote sensing can serve as an important approach for assessing the impact of disturbances (e.g. fire, grazing, trampling) on lichen cover at the landscape scale and for monitoring post-disturbance rates of recovery. Previous remote sensing-based efforts to retrieve the distribution and abundance of lichen have been restricted to particular regions and thus are not indicative of the potential for large extent mapping and monitoring. In this study, we assessed the effectiveness of machine learning methods for retrieving lichen cover and change across different regions in northern Canada and Alaska using Landsat-5 images, topographic and climate data. Global and regional-scale models were evaluated to assess whether regionally specific analyses would improve performance. Of the models tested, the deep neural network was the most accurate for predicting lichen cover (model efficiency (ME) = 0.58, mean absolute error (MAE) < 7%). For the regional analysis, the performance was the best in north-central Canada (ME = 0.56, MAE = 8%) and the worst in north-eastern Canada (ME = 0.22, MAE < 4%) due to lower lichen cover, more exposed ground, and reduced sample quality and distribution. Analysis of trend-based change detection from 1984 to 2011 in the three regional test areas showed the expected directional response with declining lichen cover in north-western Canada in response to climate-induced shrub expansion, slow recovery to wildfire in north-central Canada, and declining lichen cover in north-eastern Canada related to caribou foraging/trampling and shrub expansion. • Lichen cover retrieval assessed for northern Canada and Alaska using Landsat • Globally trained neural network preformed as well as regional models. • Lichen time series was consistent with known regional drivers of change. [ABSTRACT FROM AUTHOR]

To better understand and mitigate threats to the long-term health and functioning of wetlands, there is need to establish comprehensive inventorying and monitoring programs. Here, remote sensing data and machine learning techniques that could support or substitute traditional field-based data collection are evaluated. For the Bay of Quinte on Lake Ontario, Canada, different combinations of multi-angle/temporal quad pol RADARSAT-2, simulated compact pol RADARSAT Constellation Mission (RCM), and high and low spatial resolution Digital Elevation and Surface Models (DEM and DSM, respectively) were used to classify six land cover classes with Random Forests: shallow water, marsh, swamp, water, forest, and agriculture/non-forested. Results demonstrate that high accuracies can be achieved with multi-temporal SAR data alone (e.g., user's and producer's accuracies ≥90% for a model based on a spring image and a summer image), or via fusion of SAR and DEM and DSM data for single dates/incidence angles (e.g., user's and producer's accuracies ≥90% for a model based on a spring image, DEM, and DSM data). For all models based on single SAR images, simulated compact pol data generally achieved lower accuracies than quad pol RADARSAT-2 data. However, it was possible to compensate for observed differences through either multi-temporal/angle data fusion or the inclusion of DEM and DSM data (i.e., as a result, there was not a statistically significant difference between multiple models). With a higher repeat-pass cycle than RADARSAT-2, RCM is expected to be a reliable source of C-band SAR data that will contribute positively to ongoing efforts to inventory wetlands and monitor change in areas containing the same land cover classes evaluated here. [ABSTRACT FROM AUTHOR]