Search

In the present study, polyvinylchloride (PVC) and polymethyl methacrylate (PMMA) blended nanocomposites comprised of graphene nanoplatelets (GNPs), montmorillonite (MMT), and copper oxide (CuO) nanoparticles were prepared through solvent casting approach. The structural and morphological measurements confirmed the presence and dispersion of nanofillers in the polymeric chains. Thermo-gravimetric analysis (TGA) and differential-scanning calorimetry (DSC) investigations suggested the improved thermal stability for nanocomposite with 1.5 wt% GNPs loading having minimum weight loss and reduction in Tm due to the presence of GNPs, MMT, and CuO acting as a barrier to oxygen molecule diffusion and polymer-chain movement in the nanocomposite. The dielectric and impedance properties of PVC/PMMA/MMT/GNP/CuO nanocomposite investigated in 1 Hz to 20 MHz frequency range and at room temperature have shown improved dielectric constant upto 90.59 in 1 Hz frequency. The σac measures to be improved by 0.0034 (S/m) after adding GNPs, MMT, and CuO resulted from the interfacial polarization effect. The cole–cole plot investigations have shown the formation of semicircles for higher nanofiller loadings of nanocomposite. A drastic improvement in the SETotal was observed from lower to higher nanofiller concentrations. The total SE obtained for the nanocomposite with 2.5 wt% GNPs is upto 5 dB in 8–12 GHz range with absorption dominant nature of nanocomposite. [ABSTRACT FROM AUTHOR]

A simple solution casting technique was used to formulate films of polyvinylidenefluoride‐co‐hexafluoropropylene, polymethylmethacrylate, and Ti3AlC2 MAX phase polymer nanocomposites (PPT) with different filler content. The functional groups present in the PPT films were studied using the Fourier transform infrared spectroscopy and the nature of crystallinity was observed using X‐ray diffraction technique. The morphology of the films was studied by scanning electron microscopy. The thermal analysis was done using the thermogravimetric analysis and differential thermogravimetry analysis. The tensile behavior of the prepared films was studied from the stress‐strain graphs. The ultraviolet–visible spectra revealed their optical characteristics. The dielectric parameters of the polymer blend and nanocomposite films like dielectric constant, loss tangent, AC conductivity, and complex impedance spectroscopy with corresponding equivalent circuits were studied. A comparative study of the above parameters was done for both the polymer blend and nanocomposites to find out the advancement in the properties of the prepared nanocomposite compared with the polymer blend. The nanocomposite film having 3 wt% of Ti3AlC2 MAX phase filler loading exhibited the best properties among all the nanocomposites. The enhanced dielectric properties of the nanocomposites with mechanical and thermal resistance can be used for real‐time efficient energy storage applications. [ABSTRACT FROM AUTHOR]

This study investigates the dielectric properties, including dielectric constant (ɛ′), dielectric loss (ɛ″), tangent delta (tan δ), and AC conductivity (σac), of PVA/Y2O3 polymer nanocomposites (PNCs). The dielectric behavior of the PNCs was examined as a function of frequency and temperature. The results revealed that the addition of Y2O3 nanoparticles to the PVA matrix influenced the dielectric properties of the composites. In contrast to pure PVA, the PVA/Y2O3 PNCs with a 15 wt% Y2O3 loading exhibited high values of ɛ′, ɛ″, tan δ and σac are 647.49, 1607.48, 9.70 and 1.024 × 10−5, respectively, at low frequency and at particular temperature. Furthermore, the electrical properties of PVA/Y2O3 PNCs were also investigated using the Cole-Cole plots. These plots provide valuable insights into the complex impedance behavior and allow for comprehensive understanding of the electrical response of the nanocomposites. [ABSTRACT FROM AUTHOR]

In this work, zirconia (ZrO2) nanoparticles (NPs) incorporated poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanocomposites were fabricated at varying weight ratios through solution casting approach. The structural properties of PVDF-HFP/ZrO2 nanocomposites have been investigated by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis. The strong interaction of ZrO2 with the PVDF-HFP matrix was observed revealing the structural modifications in the nanocomposites. The thermal degradation behavior of PVDF-HFP/ZrO2 nanocomposites was investigated by thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). Addition of ZrO2 in the PVDF-HFP matrix has greatly improved the thermal stability of the PVDF-HFP/ZrO2 nanocomposites. The dielectric properties of the PVDF-HFP/ZrO2 nanocomposites were investigated as a function of frequency and temperature. The dielectric constant was observed to be higher at low frequency and decreased abruptly on increasing the frequency. Moreover, the impedance behavior of PVDF-HFP/ZrO2 nanocomposites with different loadings was studied by plotting Nyquist plots. These results revealed that PVDF-HFP/ZrO2 nanocomposites have shown enhanced thermal, dielectric and impedance properties as compared to neat PVDF-HFP film. These significant outcomes suggest that the PVDF-HFP/ZrO2 nanocomposites hold promise as viable options for energy storage applications. [ABSTRACT FROM AUTHOR]

This work reports a systematic study of the electrochemical performance of the Ti3AlC2 MAX phase/PVA-PEDOT: PSS + DMSO polymer nanocomposite (PPM) films fabricated by the facile solution cast technique. A varying weight percentage of Ti3AlC2 MAX phase nanoparticles were dispersed in the polyvinyl alcohol (PVA)-[poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) + dimethyl sulfoxide)] (PEDOT: PSS + DMSO) polymer blend to fabricate the polymer nanocomposite films. The structural, morphological, optical, thermal, electrical, and electrochemical properties of the nanocomposite films were studied meticulously. The structural and morphological studies were done by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction technique (XRD), and field emission scanning electron microscopy (FESEM). The optical properties of the PPM films were analyzed using the UV-Visible (UV-Vis) spectra. The thermal analysis of the PPM films was done from the thermogravimetric analysis (TGA) curves. The ac conductivity and dynamic mechanical analysis (DMA) were done to evaluate the electrical conductivity and mechanical properties of the PPM films. The performance enhancement of the polymer blend film by loading Ti3AlC2 MAX phase nanofiller was investigated. The nanocomposite film having the highest conductivity and the greatest mechanical strength was further considered for the electrochemical characterization. The nanocomposites reported a specific capacitance of 52.8 F/g and 1500 mF/g in 0.1 M HCl electrolyte at a scan rate of 20 mV/s in the 3-electrode system and 2-electrode system, respectively. The Nyquist plots and Bode plots were plotted from the electrochemical impedance spectroscopy (EIS) data. The Nyquist plots were analyzed from the simulated equivalent circuits. The facile fabrication method of the supercapacitor electrode with improved thermal and mechanical properties will be beneficial for their commercial electrochemical applications in the future. [ABSTRACT FROM AUTHOR]

Herein, Ti2CTx MXene‐Polyvinyl alcohol (PVA) nanocomposite films with different weight percent (wt%) of MXene loadings were successfully prepared using the facile solution casting method. The structural, morphological, optical, thermal, and tensile properties of the nanocomposite films were analyzed using FTIR, XRD, Raman, SEM, UV–Vis spectroscopy, TG‐DTA, mechanical tests, and so forth. The variation in dielectric constant, loss tangent, and AC conductivity of the nanocomposite films was analyzed in the range of 1 Hz to 10 MHz with the variation of temperature (30–150°C) and MXene concentrations (5–20 wt%) using impedance spectroscopy. The nanocomposite films showed a very high dielectric constant in the range of ~105 for lower frequency and very low dielectric loss in the range of 0–1 for higher frequency (100 kHz–10 MHz). The dielectric constant, loss tangent, and AC conductivity values increased at a certain temperature and further decreased with increase in temperature. The increase in filler concentration increased the values of these investigated electrical parameters but at a concentration of 20 wt%, the nanocomposite films reached the percolation limit, and hence a slight reduction in the dielectric properties was noticed. Moreover, the complex impedance spectroscopy studies of the nanocomposite films were also carried out and their corresponding circuit diagrams were fitted according to the obtained cole‐cole plots. [ABSTRACT FROM AUTHOR]

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO2) nanoparticles (NPS) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO2 nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO2 nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO2 NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO2 nanocomposite films as low cost, lightweight and flexible material for EMI shielding. [ABSTRACT FROM AUTHOR]

Hexagonal boron nitride nanoparticles (h-BNNPs)/Chitosan (CS)/Hydroxypropyl methylcellulose (HPMC) based ternary nanocomposites were prepared using solution casting method and characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analyses (TGA), Scanning electron microscopy (SEM) and Atomic force microscopy (AFM). The dielectric properties of CS/HPMC/h-BNNP nanocomposite films were also investigated as a function of frequency and temperature and a maximum dielectric constant of ~1200 was achieved at 5 wt % of h-BNNP loading in CS/HPMC blend matrix. The results from the structural, morphological and thermal studies revealed good interactions between h-BNNPs, CS and HPMC. [ABSTRACT FROM AUTHOR]

The hexagonal boron nitride nanoparticles (h-BNNPs) reinforced flexible polyvinylidene fluoride (PVDF) nanocomposite films were prepared via a simple and versatile solution casting method. The morphological, thermal and electrical properties of h-BNNPs/PVDF nanocomposite films were elucidated. The electromagnetic interference (EMI) shielding properties of prepared nanocomposite films were investigated in the X-band frequency regime (8–12 GHz). The EMI shielding effectiveness (SE) was increased from 1 dB for the PVDF film to 11.21 dB for the h-BNNPs/PVDF nanocomposite film containing 25 wt% h-BNNPs loading. The results suggest that h-BNNPs/PVDF nanocomposite films can be used as lightweight and low-cost EMI shielding materials. [ABSTRACT FROM AUTHOR]