Search

In order to clarify the polymorphism in the lithium sulfate family, LiREx(NH4)1 - xSO4 (0.5 ⩽ X ⩽ 4.0 mol%, nominal value; RE = Er3+, Yb3+ and Dy3+) crystals were grown from aqueous solution by slow evaporation between 298 and 313 K. The doping of the samples allowed us to obtain two polymorphic forms, α and β, of LiNH4SO4 (LAS). By means of X-ray diffraction (XRD) in single crystals, we determined the crystal structures of two new α-polytypes, which we have named α1- and β2-LAS. They present the same space group P21/c and the following relation among their lattice parameters: a2 = -c1, b2 = -b1, c2 = -2a1 - c1. In order to evaluate the stability of the new α-polytypes, we performed thermal analysis, X-ray diffraction and dielectric spectroscopy on single crystals and polycrystalline samples over the cyclic temperature range: 190 → 575 → 190 K. The results obtained by all the techniques used in this study demonstrate that α-polytypes are stable across a wide range of temperatures and they show an irreversible phase transition to the paraelectric β-phase above 500 K. In addition, a comparative study of α- and β- polytypes shows that both polymorphic structures have a common axis, with a possible intergrowth that facilitates their coexistence and promotes the reconstructive α → β transition. This intergrowth was related to small anomalies detected between 240 and 260 K, in crystals with an α-habit. [ABSTRACT FROM AUTHOR]

In order to clarify the polymorphism in the lithium sulfate family, LiREx(NH4)1 - xSO4 (0.5 ⩽ X ⩽ 4.0 mol%, nominal value; RE = Er3+, Yb3+ and Dy3+) crystals were grown from aqueous solution by slow evaporation between 298 and 313 K. The doping of the samples allowed us to obtain two polymorphic forms, α and β, of LiNH4SO4 (LAS). By means of X-ray diffraction (XRD) in single crystals, we determined the crystal structures of two new α-polytypes, which we have named α1- and β2-LAS. They present the same space group P21/c and the following relation among their lattice parameters: a2 = -c1, b2 = -b1, c2 = -2a1 - c1. In order to evaluate the stability of the new α-polytypes, we performed thermal analysis, X-ray diffraction and dielectric spectroscopy on single crystals and polycrystalline samples over the cyclic temperature range: 190 → 575 → 190 K. The results obtained by all the techniques used in this study demonstrate that α-polytypes are stable across a wide range of temperatures and they show an irreversible phase transition to the paraelectric β-phase above 500 K. In addition, a comparative study of α- and β- polytypes shows that both polymorphic structures have a common axis, with a possible intergrowth that facilitates their coexistence and promotes the reconstructive α → β transition. This intergrowth was related to small anomalies detected between 240 and 260 K, in crystals with an α-habit. [ABSTRACT FROM AUTHOR]

Directional bonding strategies guide the design of complex molecular architectures, yet challenges arise due to emergent behavior. Rigid structures face geometric constraints and sensitivity to mismatches, hindering the efficient assembly of molecular organic cages (MOCs). Harnessing intramolecular non-covalent interactions offers a promising solution, broadening geometrical possibilities and enhancing adaptability to boost assembly yields. However, identifying these interactions remains challenging, with their full potential sometimes latent until final assembly. This study explores these challenges by synthesizing boronic acid tripods with varied oxygen positions at the tripodal feet and investigating their role in assembling tetrahedral boronate MOCs. Our results reveal substantial differences in the assembly efficiency among tripods. While the building blocks with oxygen in the benzylic position relative to the central aromatic ring form the MOCs in high yields, those with the oxygen atom directly bound to the central aromatic ring, only yield traces. Through X-ray crystallography and DFT analyses, we elucidate how intramolecular interactions profoundly influence the geometry of the building blocks and cages in a relay-like fashion, highlighting the importance of considering intramolecular interactions in the rational design of (supra)molecular architectures., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

A novel family of cobalt(II) compounds with tridentate pyridine-2,6-diiminephenyl type ligands featuring electron-withdrawing substituents of general formula [Co( n -XPhPDI) 2 ](ClO 4 ) 2 ·S [ n -XPhPDI = 2,6-bis( N-n -halophenylformimidoyl)pyridine with n = 4 (1-3) and 3 (4); X = I (1), Br (2 and 4) and Cl (3); S = MeCN (1 and 2) and EtOAc (3)] has been synthesised and characterised by single-crystal X-ray diffraction, electron paramagnetic resonance, and static (dc) and dynamic (ac) magnetic measurements combined with theoretical calculations. The structures of 1-4 consist of mononuclear bis(chelating) cobalt(II) complex cations, [Co II ( n -XPhPDI) 2 ] 2+ , perchlorate anions, and acetonitrile (1 and 2) or ethyl acetate (3) molecules of crystallisation. This unique series of mononuclear six-coordinate octahedral cobalt(II) complexes displays both thermally-induced low-spin (LS)/high-spin (HS) transition and field-induced slow magnetic relaxation in both LS and HS states. A complete LS ↔ HS transition occurs for 1 and 2, while it is incomplete for 4, one-third of the complexes being HS at low temperatures. In contrast, 3 remains HS in all the temperature range. 1 and 2 show dual spin relaxation dynamics under the presence of an applied dc magnetic field ( H dc ), with the occurrence of faster- (FR) and slower-relaxing (SR) processes at lower ( H dc = 1.0 kOe) and higher fields ( H dc = 2.5 kOe), respectively. On the contrary, 3 and 4 exhibit only SR and FR relaxations, regardless of H dc . Overall, the distinct field-dependence of the single-molecule magnet (SMM) behaviour along with this family of spin-crossover (SCO) cobalt(II)- n -XPhPDI complexes is dominated by Raman mechanisms and, occasionally, with additional temperature-independent Intra-Kramer [LS or HS ( D > 0)] or Quantum Tunneling of Magnetisation mechanisms [HS ( D < 0)] also contributing.

The ability of mononuclear first-row transition metal complexes as dynamic molecular systems to perform selective functions under the control of an external stimulus that appropriately tunes their properties may greatly impact several domains of molecular nanoscience and nanotechnology. This study focuses on two mononuclear octahedral cobalt(ii) complexes of formula {[Co II (HL) 2 ][Co II (HL)L]}(ClO 4 ) 3 ·9H 2 O (1) and [Co II L 2 ]·5H 2 O (2) [HL = 4'-(4-carboxyphenyl)-2,2':6',2''-terpyridine], isolated as a mixed protonated/hemiprotonated cationic salt or a deprotonated neutral species. This pair of pH isomers constitutes a remarkable example of a dynamic molecular system exhibiting reversible changes in luminescence, redox, and magnetic (spin crossover and spin dynamics) properties as a result of ligand deprotonation, either in solution or solid state. In this last case, the thermal-assisted spin transition coexists with the field-induced magnetisation blockage of "faster" or "slower" relaxing low-spin Co II ions in 1 or 2, respectively. In addition, pH-reversible control of the acid-base equilibrium among dicationic protonated, cationic hemiprotonated, and neutral deprotonated forms in solution enhances luminescence in the UV region. Besides, the reversibility of the one-electron oxidation of the paramagnetic low-spin Co II into the diamagnetic low-spin Co III ion is partially lost and completely restored by pH decreasing and increasing. The fine-tuning of the optical, redox, and magnetic properties in this novel class of pH-responsive, spin crossover molecular nanomagnets offers fascinating possibilities for advanced multifunctional and multiresponsive magnetic devices for molecular spintronics and quantum computing such as pH-effect spin quantum transformers., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A device comprising a zirconium-based metal-organic framework (MOF) mixed-matrix membrane (MMM) framed in a plastic holder has been used to monitor the content of personal care products (PCPs) in cosmetic samples. Seven different devices containing the porous frameworks UiO-66, UiO-66-COOH, UiO-67, DUT-52, DUT-67, MOF-801, and MOF-808 in polyvinylidene fluoride (PVDF) membranes were studied. Optimized membranes reach high adsorption capacities of PCPs, up to 12.5 mg·g -1 benzophenone in a 3.0 mg·L -1 sample. The MMM adsorption kinetics, uptake measurements, and isotherm studies were carried out with aqueous standard solutions of PCPs to ensure complete characterization of the performance. The studies demonstrate the high applicability and selectivity of the composites prepared, highlighting the performance of PVDF/DUT-52 MMM that poses uptakes up to 78% for those PCPs with higher affinity while observing detection limits for the entire method down to 0.03 μg·L -1 . The PVDF/DUT-52 device allowed the detection of parabens and benzophenones in the samples, with PCPs found at concentrations of 1.9-24 mg·L -1 .

Hybrid materials based on polystyrene (PS) and green metal-organic frameworks (MOFs) were synthesized, characterized, and evaluated as potential sorbents in dispersive micro-solid-phase extraction (µ-dSPE). Among the resulting materials, the hybrid PS/DUT-67(Zr) was selected as the adequate extraction material for the monitoring of six personal care products in micellar cosmetic samples, combining the µ-dSPE method with ultra-high performance liquid chromatography (UHPLC) coupled to ultraviolet/visible detection (UV/Vis). Univariate studies and a factorial design were performed in the optimization of the microextraction procedure. The compromise optimum extraction conditions included 20 mg of PS/DUT-67(Zr) for 10 mL of sample, 2 min of extraction time, and two desorption steps using 100 µL of acetonitrile and 5 min assisted by vortex in each one. The validated μ-dSPE-UHPLC-UV/Vis method presented limits of detection and quantification down to 3.00 and 10.0 μg·L -1 , respectively. The inter-day precision values were lower than 23.5 and 21.2% for concentration levels of 75 μg·L -1 and 650 μg·L -1 , respectively. The hydrophobicity of the resulting PS/DUT-67(Zr) material was crucial for the improvement of its extraction capacity in comparison with its unitary components, showing the advantages of combining MOFs with other materials, getting new sorbents with interesting properties.

Metal-organic frameworks (MOFs) are attractive materials used as sorbents in analytical microextraction applications for contaminants of emerging concern (CECs) from environmental liquid matrices. The demanding specs for a sorbent in the analytical application can be comprehensively studied by considering the interactions of the target analytes with the frameworks by the use of single-crystal X-ray diffraction, computational analysis, and adsorption studies, including the kinetic ones. The current study intends a better understanding of the interactions of target CECs (particularly, propylparaben (PPB) as a model) and three Zn-based layered pillared MOFs: CIM-81 [Zn 2 (tz) 2 (bdc)] (Htz = 1,2,4-triazole and H 2 bdc = 1,4-benzenedicarboxylic acid) and their amino derivatives [Zn 2 (NH 2 -tz) 2 (bdc)] CIM-82 and [Zn 2 (tz) 2 (NH 2 -bdc)] CIM-83 (NH 2 -Htz = 3-amino-1,2,4-triazole and NH 2 -H 2 bdc = 2-amino-1,4-benzenedicarboxylic acid). The crystal structures of the two solvate compounds ( dma@CIM-81 (dma = dimethylacetamide) and acetone@CIM-81 ) were solved by single-crystal X-ray diffraction to determine the points of interaction between the framework and the guest molecules. They also served as a starting point for the computational modeling of the PPB@CIM-81 compound, showing that up to two PPB molecules can be hosted in one of the pores, while only one can be trapped in the second pore type, leading to a maximum theoretical capacity of 291.9 mg g -1 . This value is close to the value obtained by the adsorption isotherm experiment for CIM-81 (283 mg g -1 ). This value is, by far, higher than those previously reported for other materials for the removal of PPB from water, and also higher than the experimental values obtained for CIM-82 (54 mg g -1 ) and CIM-83 (153 mg g -1 ). The kinetics of adsorption is not very fast, with uptake of about 40% in 3 h, although a 70% release in methanol is achieved in 1 h. In addition, a further comparison of performance in analytical microextraction (requiring only 10 mg of CIM-81 ) was carried out together with chromatographic analysis to support all insights attained, with the method being able to monitor CECs as low as μg L -1 levels in complex environmental water samples, thus performing successfully for water monitoring even in multicomponent scenarios.

A headspace solid-phase microextraction (HS-SPME) method was developed using the metal-organic framework (MOF) CIM-80(Al) as extraction phase and in combination with gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of 6 methylsiloxanes and 7 musk fragrances in different environmental waters. The chromatographic separation was optimized in different GC instruments equipped with different detectors, allowing the correct separation and identification of the compounds. The HS-SPME method was optimized using a Box-Behnken experimental design, while the validation was carried out together with the most suitable commercial fiber (divinylbenzene/polydimethylsiloxane) for comparison purposes. The MOF-based coating was particularly efficient for the determination of volatile methylsiloxanes, showing moderately lower limits of detection (of 0.2 and 0.5 μg L -1 versus 0.6 μg L -1 for cyclic methylsiloxanes) and slightly better precision (relative standard deviation values lower than 17% versus 22%) than the commercial coating, while avoiding the cross-contamination issues associated to the polymeric composition of commercial fibers. The method was applied for the analysis of seawater and wastewater samples, allowing the quantification of several analytes and the assessment of matrix effects. The proposed HS-SPME method using the CIM-80(Al) fiber constitutes a more environmentally friendly, simpler, and efficient strategy in comparison with other sample preparation methods using different extraction techniques, while the use of a MOF as fiber sorbent constitutes a potential alternative to exploit the features of SPME for the challenging environmental monitoring of these compounds., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

A dynamic nucleophilic aromatic substitution of tetrazines (S N Tz) is presented herein. It combines all the advantages of dynamic covalent chemistry with the versatility of the tetrazine moiety. Indeed, libraries of compounds or sophisticated molecular structures can be easily obtained, which are susceptible to post-functionalization by inverse electron demand Diels-Alder (IEDDA) reaction, which also locks the exchange. Additionally, the structures obtained can be disassembled upon the application of the right stimulus, either UV irradiation or a suitable chemical reagent. Moreover, S N Tz is compatible with the imine chemistry of anilines. The high potential of this methodology has been proved by building two responsive supramolecular systems: A macrocycle that displays a light-induced release of acetylcholine; and a truncated [4+6] tetrahedral shape-persistent fluorescent cage, which is disassembled by thiols unless it is post-stabilized by IEDDA., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Thermal-assisted spin crossover and field-induced slow magnetic relaxation coexist in the solid state for the mononuclear cobalt(ii) complex with the non-innocent 2,6-bis(N-4-methoxyphenylformimidoyl)pyridine ligand. One-electron oxidation of the paramagnetic low-spin Co II ion (S Co = 1/2) to the diamagnetic low-spin Co III ion (S Co = 0) leads to the electroswitching of the slow magnetic relaxation in acetonitrile solution.

A new solid-phase microextraction (SPME) fiber coating was prepared by the immobilization of the metal-organic framework (MOF) CIM-80(Al) on nitinol wires by a green in situ growth approach, using an aqueous synthetic approach, and without the need of any additional material to ensure the attachment of the MOF to the nitinol support. The coating was used for the development of headspace (HS) and direct immersion (DI) SPME methods in combination with gas chromatography and mass spectrometry (GC-MS) for the determination of polycyclic aromatic hydrocarbons (PAHs) as model compounds. Both methods were optimized and validated using the MOF-based fiber together with the commercial polydimethylsiloxane (PDMS) fiber. The MOF extraction phase exhibited superior analytical performance for most of the PAHs in HS-SPME mode (and particularly for less volatiles), while the PDMS fiber presented better results in the DI-SPME method. The analytical performance of the MOF sorbent coating in HS- and DI-SPME methods was also evaluated in urine and brewed coffee samples, without requiring any pretreatment step apart from dilution for DI-SPME experiments, thus showing suitability of the novel coatings for the analysis of complex samples. The proposed CIM-80(Al) fiber was efficient and biocompatible (for using a low cytotoxic sorbent and a biocompatible core support), and it also demonstrated stability and robustness, with inter-fiber (and inter-day) relative standard deviation values lower than 19%, and reusability for more than 80 extraction cycles using 280 °C as desorption temperature., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Chemical vapor deposition of MOFs (MOF-CVD) has been used to coat solid-phase microextraction (SPME) fibers with ZIF-8, by exposing ZnO layers to the linker vapor (2-methylimidazole). This ZIF-8 coating has been used as a seed layer in a following solvothermal MOF growth step in order to increase the ZIF-8 thickness. The combined MOF-CVD and solvothermal growth of ZIF-8 on the fibers result in a thickness of ~3 μm, with adequate thermal stability, and mechanical integrity when tested with methanol and acetonitrile ultrasonic treatments. The fibers have been evaluated in direct immersion mode using gas chromatography and flame ionization detection (GC-FID), for a group of target analytes including three polycyclic aromatic hydrocarbons (PAHs) and five personal care products (PCPs). The optimized conditions of the SPME-GC-FID methods include low amount of aqueous sample (5 mL), stirring for 45 min at 35 °C, and desorption at 280 °C for 5 min. The method presents limits of detection down to 0.6 μg L -1 ; intra-day, inter-day and inter-batch relative standard deviation values lower than 16%, 19%, and 23%, respectively; and a lifetime higher than 70 cycles., Competing Interests: Declaration of competing interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Core-shell SiO 2 @CIM-80(Al) microspheres were synthesized, characterized, and used as novel sorbent in a dispersive miniaturized solid-phase extraction (D-μSPE) method for the determination of fourteen polycyclic aromatic hydrocarbons (PAHs) in wastewaters by ultra-high performance liquid chromatography coupled to a fluorescence detector (UHPLC-FD). A Doehlert experimental design permitted to optimize the main parameters affecting the microextraction procedure, intending the obtaining of a simple approach. Optimized extraction conditions include 13 mg of SiO 2 @CIM-80(Al) microparticles (~2 mg CIM-80(Al)), 2.5 min of extraction time, 0.125 mL of acetonitrile (ACN) as desorption solvent and 0.5 min of desorption time. The entire method showed adequate analytical performance with limits of detection down to 5 ng L -1 , and inter-day precision lower than 14.1% for a concentration level of 0.5 μg L -1 . The extraction capability of SiO 2 @CIM-80(Al) microspheres was compared to that obtained with commercially available silica microspheres and the neat MOF CIM-80(Al), demonstrating the advantages of the use of MOF core-shell sorbents in D-μSPE., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The mixed-ligand strategy was selected as an approach to tailor a metal-organic framework (MOF) with microextraction purposes. The strategy led to the synthesis of up to twelve UiO-66-based MOFs with different amounts of functionalized terephthalate ligands (H-bdc), including nitro (-NO 2 ) and amino (-NH 2 ) groups (NO 2 -bdc and NH 2 -bdc, respectively). Increases of 25% in ligands were used in each case, and different pore environments were thus obtained in the resulting crystals. Characterization of MOFs includes powder X-ray diffraction, infrared spectroscopy, and elemental analysis. The obtained MOFs with different degrees and natures of functionalization were tested as sorbents in a dispersive miniaturized solid-phase extraction (D-µSPE) method in combination with high-performance liquid chromatography (HPLC) and diode array detection (DAD), to evaluate the influence of mixed functionalization of the MOF on the analytical performance of the entire microextraction method. Eight organic pollutants of different natures were studied, using a concentration level of 5 µg· L -1 to mimic contaminated waters. Target pollutants included carbamazepine, 4-cumylphenol, benzophenone-3, 4-tert-octylphenol, 4-octylphenol, chrysene, indeno(1,2,3-cd)pyrene, and triclosan, as representatives of drugs, phenols, polycyclic aromatic hydrocarbons, and disinfectants. Structurally, they differ in size and some of them present polar groups able to form H-bond interactions, either as donors (-NH 2 ) or acceptors (-NO 2 ), permitting us to evaluate possible interactions between MOF pore functionalities and analytes' groups. As a result, extraction efficiencies can reach values of up to 60%, despite employing a microextraction approach, with four main trends of behavior being observed, depending on the analyte and the MOF.

We herein present the synthesis, spectroscopic analysis, description of the crystal structures and magnetic properties of four new complexes of the formula [{Cu(opba)(H 2 O) 1.2 }{Cu(dmphen)(SCN)} 2 ]·dmf (1), [{Cu(opba)} 2 {Cu(dmphen)Cl} 4 ]·1.5dmf·2.5dmso (2), [{Cu(opba)} 2 {Cu(dmphen)Br} 4 ]·dmf·2.3dmso (3) and [{Cu(opba)}{Cu(dmphen)(dca)} 2 ] n (4) [H 4 opba = N,N'-1,2-phenylenebis(oxamic acid), dmphen = 2,9-dimethyl-1,10-phenanthroline and dca = dicyanamide anion]. 1 is a neutral tricopper(ii) complex where an inner [Cu(opba)] 2- fragment adopts a bis-bidentate coordination mode towards two outer [Cu(dmphen)(NCS)] + units. 2 and 3 are bis-trinuclear species where two oxamato-bridged [Cu(opba){Cu(dmphen)X} 2 ] [X = Cl - (2) and Br - (3)] tricopper(ii) entities are connected by two single X ions involving the central and one of the peripheral copper(ii) ions. 4 is a neutral chain made up of oxamato-bridged [Cu(opba){Cu(dmphen)(dca)} 2 ] fragments linked through a single end-to-end dicyanamide ligand that connects the central copper(ii) ion with one of the peripheral copper(ii) ions. Magnetic susceptibility measurements on polycrystalline samples of 1-4 in the temperature range 1.9-300 K show the occurrence of strong antiferromagnetic interactions between the copper(ii) ions through the oxamate bridge [J = -328(2) (1), -288(2) (2), -431(2) (3) and -370(1) cm -1 (4), the Hamiltonian being defined as H = -J(S 1 ·S 2 + S 1 ·S 3 )] and a weak ferromagnetic coupling across the equatorial-axial exchange pathway provided by the single halide bridge [j = +3.08(3) (2) and +2.34(1) cm -1 (3)]. These values are analyzed by simple orbital symmetry considerations and compared with those reported in the literature for polynuclear copper(ii) complexes with these bridging ligands.

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL -1 ; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL -1 )-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Four metal-organic frameworks (MOFs), specifically UiO-66, UiO-66-NH₂, UiO-66-NO₂, and MIL-53(Al), were synthesized, characterized, and used as sorbents in a dispersive micro-solid phase extraction (D-µSPE) method for the determination of nine pollutants of different nature, including drugs, phenols, polycyclic aromatic hydrocarbons, and personal care products in environmental waters. The D-µSPE method, using these MOFs as sorbents and in combination with high-performance liquid chromatography (HPLC) and diode-array detection (DAD), was optimized. The optimization study pointed out to UiO-66-NO₂ as the best MOF to use in the multi-component determination. Furthermore, the utilization of isoreticular MOFs based on UiO-66 with the same topology but different functional groups, and MIL-53(Al) to compare with, allowed us for the first time to evaluate the influence of such functionalization of the ligand with regards to the efficiency of the D-µSPE-HPLC-DAD method. Optimum conditions included: 20 mg of UiO-66-NO₂ MOF in 20 mL of the aqueous sample, 3 min of agitation by vortex and 5 min of centrifugation, followed by the use of only 500 µL of acetonitrile as desorption solvent (once the MOF containing analytes was separated), 5 min of vortex and 5 min of centrifugation. The validation of the D-µSPE-HPLC-DAD method showed limits of detection down to 1.5 ng·L -1 , average relative recoveries of 107% for a spiked level of 1.50 µg·L -1 , and inter-day precision values with relative standard deviations lower than 14%, for the group of pollutants considered.

The CIM-80 material (aluminum(iii)-mesaconate) has been synthetized in high yield through a novel green procedure involving water and urea as co-reactants. The CIM-80 material exhibits good thermal stability with a working range from RT to 350 °C with a small contraction upon desolvation. Moreover, this material is stable in water at different pH values (1-10) for at least one week, and shows a LC 50 value higher than 2 mg mL -1 . The new material has been tested in a microextraction methodology for the monitoring of up to 22 water pollutants while presenting little environmental impact: only 20 mg of CIM-80 and 500 μL of acetonitrile are needed per analysis. The analytical performance of the CIM-80 in the microextraction strategy is similar to or even better for several pollutants than that of MIL-53(Al). The average extraction efficiencies range from ∼20% for heavy polycyclic aromatic hydrocarbons to ∼70-100% for the lighter ones. In the case of the emerging contaminants, the average extraction efficiency can reach values up to 70% for triclosan and carbamazepine., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Five metal-organic frameworks (MOFs), specifically HKUST-1, MOF-5(Zn), MIL-53(Al), UiO-64 and MOF-74(Zn) are synthesized, characterized, and utilized in a miniaturized solid-phase extraction method under dispersive mode (D-µSPE) for the determination of six pollutants of different nature, including one polycyclic aromatic hydrocarbon, two hormones, two drugs, and one disinfectant, from environmental waters (tap water and wastewater). A discussion of possible interactions justifying the partitioning of target analytes to the MOFs is included, considering not only the analytes' physicochemical characteristics but also those of MOFs: metal nature, structural environment of MOF pores, pore size and pore aperture widths, among others. MIL-53(Al) is selected for its versatility and high extraction efficiency for the target compounds. The D-µSPE method using MIL-53(Al) is optimized and used in combination with high-performance liquid chromatography (HPLC) with diode array detector (DAD) or liquid-chromatography with time-of-flight mass spectrometric detector (LC-TOF). Under optimum conditions, only 5mg of MIL-53(Al) are required for 10mL of water, with the aid of 5min of vortex and 5min of centrifugation. Elution is accomplished with 200µL of acetonitrile (3 times), and evaporation down to 100µL before LC injection. Detection limits down to 0.040μgL -1 for triclosan and 0.013μgL -1 for atrazine are obtained for the entire method using HPLC-DAD and LC-TOF, respectively. The method, operating at low spiked levels (2µgL -1 for HPLC-DAD and 0.7µgL -1 for LC-TOF), is also characterized for average relative recoveries of 109% and 105%; relative standard deviation values lower than 8.7% and 7.5%; and average extraction efficiencies of 41.2% and 49.1%; using HPLC-DAD and LC-TOF, respectively; while demonstrating adequate analytical performance with complex samples such as wastewaters., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A novel three-dimensional (3D) coordination polymer with the formula (C 3 N 2 H 5 ) 4 [MnCr 2 (ox) 6 ]·5H 2 O (2), where ox = oxalate and C 3 N 2 H 5 = imidazolium cation, is reported. Single crystal X-ray diffraction reveals that this porous coordination polymer adopts a chiral three-dimensional quartz-like architecture, with the guest imidazolium cations and water molecules being hosted in its pores. This novel multifunctional material exhibits both a ferromagnetic ordering at T C = 3.0 K, related to the host MnCr 2 network, and high proton conductivity [1.86 × 10 -3 S cm -1 at 295 K and 88% relative humidity (RH)] due to the presence of the acidic imidazolium cations and free water molecules. The similarity of the structure of compound 2 to that of the previously reported analogous compound (NH 4 ) 4 [MnCr 2 (ox) 6 ]·4H 2 O, (1), also allows us to analyse, to a certain extent, the effect of the acidity of the proton donating guest molecules on proton conduction properties. 2 hosts, in one-dimensional (1D) channels, imidazolium cations, which are more acidic than the ammonium ones in 1 and, as a consequence, 2 shows higher proton conduction than 1, highlighting the effect of the pK a of the proton donating guest molecules on proton conductivity.

In the series described in this work, the hydrothermal synthesis led to oxidation of the 5-methyl-pyrazinecarboxylate anion to the 2,5-pyrazinedicarboxylate dianion (2,5-pzdc) allowing the preparation of three-dimensional (3D) lanthanide(III) organic frameworks of formula {[Ln 2 (2,5-pzdc) 3 (H 2 O) 4 ]·6H 2 O} n [Ln = Ce (1), Pr (2), Nd (3), and Eu (4)] and {[Er 2 (2,5-pzdc) 3 (H 2 O) 4 ]·5H 2 O} n (5). Single-crystal X-ray diffraction on 1-5 reveals that they crystallize in the triclinic system, P1̅ space group with the series 1-4 being isostructural. The crystal structure of the five compounds are 3D with the lanthanide(III) ions linked through 2,5-pzdc 2- dianions acting as two- and fourfold connectors, building a binodal 4,4-connected (4·6 4 8)(4 2 6 2 8 2 )-mog network. The photophysical properties of the Nd(III) (3) and Eu(III) (4) complexes exhibit sensitized photoluminescence in the near-infrared and visible regions, respectively. The photoluminescence intensity and lifetime of 4 were very sensitive due to the luminescence quenching of the 5 D 0 level by O-H oscillators of four water molecules in the first coordination sphere leading to a quantum efficiency of 11%. Variable-temperature magnetic susceptibility measurements for 1-5 reveal behaviors as expected for the ground terms of the magnetically isolated rare-earth ions [ 2 F 5/2 , 2 H 4 , 4 I 9/2 , 7 F 0 , and 4 I 15/2 for Ce(III), Pr(III), Nd(III), Eu(III), and Er(III), respectively] with M J = 0 (2 and 4) and ±1/2 (1, 3, and 5). Q-band electron paramagnetic resonance measurements at low temperature corroborate these facts. Frequency-dependent alternating-current magnetic susceptibility signals under external direct-current fields in the range of 100-2500 G were observed for the Kramers ions of 1, 3, and 5, indicating slow magnetic relaxation (single-ion magnet) behavior. In these compounds, τ -1 decreases with decreasing temperature at any magnetic field, but no Arrhenius law can simulate such a dependence in all the temperature range. This dependence can be reproduced by the contributions of direct and Raman processes, the Raman exponent (n) reaching the expected value (n = 9) for a Kramers system.

Solid-phase microextraction (SPME) is a powerful technique commonly used in sample preparation for extraction/preconcentration of analytes from a wide variety of samples. Among the trends in improving SPME applications, current investigations are focused on the development of novel coatings able to improve the extraction efficiency, sensitivity, and thermal and mechanical stability, within other properties, of current commercial SPME fibers. Metal-organic frameworks (MOFs) merit to be highlighted as promising sorbent materials in SPME schemes. MOFs are porous hybrid materials composed by metal ions and organic linkers, presenting the highest surface areas known, with ease synthesis and high tuneability, together with adequate chemical and thermal stability. For MOF based-SPME fibers, it results important to pretreat adequately the SPME supports to ensure the correct formation of the MOF onto the fiber or the attachment MOF-support. This, in turn, will increase the final stability of the fiber while generating uniform coatings. This review provides a critical overview of the current state of the use of MOFs as SPME coatings, not only highlighting the advantages of these materials versus commercial SPME coatings in terms of stability, selectivity, and sensitivity; but also insightfully describing the current methods to obtain reproducible MOF-based SPME coatings., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A hybrid material composed by the metal-organic framework (MOF) HKUST-1 and Fe3O4 magnetic nanoparticles (MNPs) has been synthetized in a quite simple manner, characterized, and used in a magnetic-assisted dispersive micro-solid-phase extraction (M-d-μSPE) method in combination with ultra-high-performance liquid chromatography (UHPLC) and fluorescence detection (FD). The application was devoted to the determination of 8 heavy polycyclic aromatic hydrocarbons (PAHs) in different aqueous samples, specifically tap water, wastewaters, and fruit tea infusion samples. The overall M-d-μSPE-UHPLC-FD method was optimized and validated. The method is characterized by: its simplicity in both the preparation of the hybrid material (simple mixing) and the magnetic-assisted approach (∼10min extraction time), the use of low sorbent amounts (20mg of HKUST-1 and 5mg of Fe3O4 MNPs), and the low organic solvent consumption in the overall M-d-μSPE-UHPLC-FD method (1.5mL of acetonitrile in the M-d-μSPE method and 2.8mL of acetonitrile in the UHPLC-FD run). The resulting method has high sensitivity, with LODs down to 0.8ngL(-1); adequate intermediate precision, with relative standard deviation values (RSD) always lower than 6.3% (being the range 5.9-9.0% in tap water for a spiked level of 45ngL(-1), 6.1-14% in wastewaters for a spiked level of 45ngL(-1), and 7.2-17% in fruit tea infusion samples for a spiked level of 45ngL(-1)); and adequate relative recoveries, with average values of 82% in tap water, and 94% and 75% in wastewater and fruit tea infusion samples, respectively, if using the proper matrix-matched calibration., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Single-ion magnets (SIMs) are the smallest possible magnetic devices and are a controllable, bottom-up approach to nanoscale magnetism with potential applications in quantum computing and high-density information storage. In this work, we take advantage of the promising, but yet insufficiently explored, solid-state chemistry of metal-organic frameworks (MOFs) to report the single-crystal to single-crystal inclusion of such molecular nanomagnets within the pores of a magnetic MOF. The resulting host-guest supramolecular aggregate is used as a playground in the first in-depth study on the interplay between the internal magnetic field created by the long-range magnetic ordering of the structured MOF and the slow magnetic relaxation of the SIM., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report two novel three-dimensional porous coordination polymers (PCPs) of formulas Li4{Mn4[Cu2(Me3mpba)2]3}·68H2O (2) and K4{Mn4[Cu2(Me3mpba)2]3}·69H2O (3) obtained-via alkali cation exchange in a single-crystal to single-crystal process-from the earlier reported anionic manganese(II)-copper(II) PCP of formula Na4{Mn4[Cu2(Me3mpba)2]3}·60H2O (1) [Me3mpba(4-) = N,N'-2,4,6-trimethyl-1,3-phenylenebis(oxamate)]. This postsynthetic process succeeds where the direct synthesis in solution from the corresponding building blocks fails and affords significantly more robust PCPs with enhanced magnetic properties [long-range 3D magnetic ordering temperatures for the dehydrated phases (1'-3') of 2.0 (1'), 12.0 (2'), and 20.0 K (3')]. Changes in the adsorptive properties upon postsynthetic exchange suggest that the nature, electrostatic properties, mobility, and location of the cations within the framework are crucial for the enhanced structural stability. Overall, these results further confirm the potential of postsynthetic methods (including cation exchange) to obtain PCPs with novel or enhanced physical properties while maintaining unaltered their open-framework structures.

A unique chiral three-dimensional magnet with an overall racemic double-interpenetrated (10,3)-a structure of the formula [(S)-(1-PhEt)Me3N]4[Mn4Cu6(Et2pma)12](DMSO)3]·3DMSO·5H2O (1; Et2pma = N-2,6-diethylphenyloxamate) has been synthesized by the self-assembly of a mononuclear copper(II) complex acting as a metalloligand toward Mn(II) ions in the presence of a chiral cationic auxiliary, constituting the first oxamato-based chiral coordination polymer exhibiting long-range magnetic ordering.

Three metal-organic frameworks (MOFs), specifically HKUST-1, MOF-5, and MIL-53(Al), have been synthetized, characterized, studied and compared in a vortex-assisted dispersive micro-solid-phase extraction (VA-D-µ-SPE) procedure in combination with high-performance liquid chromatography (HPLC) with diode-array detection (DAD) for determining seven parabens in environmental waters (tap water, swimming pool water, and water coming from a spa pool), human urine (from two volunteers), and cosmetic creams (two commercial brands). Experimental parameters, such as nature and amount of MOF, sample volume, nature of elution solvent and its amount, vortex and centrifugation time, among others, were properly optimized. HKUST-1 was the most adequate MOF to work with. Detection limits for the overall method down to 0.1 μgL(-1) for butylparaben (BPB) and benzylparaben (BzPB) were obtained, with determination coefficients (R(2)) higher than 0.9966 for a range of 0.5-147 μgL(-1) (depending on the paraben), average relative recoveries (RR, in %) of 80.3% at the low spiked level (7 μgL(-1)), and relative standard deviation (RSD) values below 10% also at the low spiked level. The strength of the affinity between HKUST-1 and parabens was evaluated, and it ranged from 33.5% for isopropylparaben (iPPB) to 77.0% for isobutylparaben (iBPB). When analyzing complex environmental waters, RR values of 78%, inter-day precision values (as RSD) lower than 15%, and intra-day precision values lower than 7.8% were obtained, despite the observed matrix effect. When analyzing cosmetic creams, parabens were detected, with contents ranging from 0.14 ± 0.01 μgg(-1) for EPB in the healing cream analyzed to 1.12 ± 0.07 mgg(-1) for MPB in the mask cream analyzed, with precision values (RSD) lower than 12% and RR values from 63.7% for propylparaben (PPB) to 121% for iPPB. When analyzing human urine, no parabens were detected but the method could be performed with RSD values lower than 19%. These results show the adequateness of MOFs as sorbents in VA-D-µ-SPE procedures despite sample complexity., (Copyright © 2015 Elsevier B.V. All rights reserved.)