Search

The authors wish to make the following modification to this paper [...].

Ticks carry several human pathogenic microbes including Borreliae and Flavivirus causing tick-born encephalitis. Ticks can also carry DNA of Chlamydia-like organisms (CLOs). The purpose of this study was to investigate the occurrence of CLOs in ticks and skin biopsies taken from individuals with suspected tick bite. DNA from CLOs was detected by pan-Chlamydiales-PCR in 40% of adult ticks from southwestern Finland. The estimated minimal infection rate for nymphs and larvae (studied in pools) was 6% and 2%, respectively. For the first time, we show CLO DNA also in human skin as 68% of all skin biopsies studied contained CLO DNA as determined through pan-Chlamydiales-PCR. Sequence analyses based on the 16S rRNA gene fragment indicated that the sequences detected in ticks were heterogeneous, representing various CLO families; whereas the majority of the sequences from human skin remained "unclassified Chlamydiales" and might represent a new family-level lineage. CLO sequences detected in four skin biopsies were most closely related to "uncultured Chlamydial bacterium clones from Ixodes ricinus ticks" and two of them were very similar to CLO sequences from Finnish ticks. These results suggest that CLO DNA is present in human skin; ticks carry CLOs and could potentially transmit CLOs to humans., Competing Interests: The authors declare no conflict of interest.

Self-reinforced polylactide-polyglycolide (80/20) composite rods, 2 mm in diameter and 36 mm in length, were implanted into the dorsal subcutaneous tissue of 20 rabbits. Osteotomies of the distal femur were fixed with these rods (2x15 mm) in the rabbits. The follow-up times varied from 3 to 104 weeks. After sacrifice, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, microradiographic, oxytetracycline-fluorescence, and histomorphometrical studies of the osteotomized and intact control femora were performed. After 6 weeks the mechanical properties had decreased significantly, but osteotomies had healed uneventfully. The present investigation showed that the mechanical strength and fixation properties of SR-Polylactide-glycolide (80/20) rods are suitable for fixation of cancellous bone osteotomies in rabbits provided that the operative technique is correct. The present article is the first report on the application of these rods for fixation of cancellous bone osteotomies.

The effects of low-intensity pulsed ultrasound (30 mW/cm2) were investigated in experimental cancellous bone fracture healing in bioabsorbable self-reinforced poly-L-lactide (SR-PLLA) rod fixed distal femur osteotomy in rats. A transverse transcondylar osteotomy was fixed with one SR-PLLA rod in 32 male Wistar rats of the age of 20 weeks. Half of the rats had a daily 20-min ultrasound exposure for three weeks. The follow-up times were three, six, and 12 weeks. Radiographical, histological, microradiographical, oxytetracycline labeling, and histomorphometrical analyses were performed. No foreign-body reactions were noted. The biocompatibility of SR-PLLA and ultrasound was found to be good. In the radiological and histological assessments there was a slight tendency for enhanced healing in the ultrasound group at three weeks, but at six and 12 weeks no differences were observed. The histomorphometrical and oxytetracycline labeling analyses showed that ultrasound exposure had no significant effects on bone healing. The present study shows that there were no obvious findings to support the hypothesis that low-intensity pulsed ultrasound enhances bone healing in self-reinforced poly-L-lactide (SR-PLLA) rod fixed experimental metaphyseal distal femur osteotomy in rats. The observed good biocompatibility provides a safe starting-point for clinical trials on bioabsorbable fixation combined with low-intensity ultrasound.

Background: Self-reinforced poly(L/dL)lactide 70:30 (SR-PLA70) retains its strength in bone for 24 weeks, whereas self-reinforced poly-L-lactide (SR-PLLA) retains its strength for over 36 weeks. In this prospective randomized study, bioabsorbable 4.5-mm SR-PLA70 screws were compared with SR-PLLA screws in the treatment of displaced ankle fractures in adults., Methods: Sixty-two patients with ankle fractures needing operative treatment were randomized into two groups. Comminuted fractures needing plating were excluded. In total 54 of 62 patients were followed up for 1 year by clinical evaluation, radiographs, and Olerud-Molander score., Results: The study groups differed significantly only in the mean duration of sick leave (SR-PLA70, 60 days; SR-PLLA, 65 days; P = 0.02). At the 1-year follow-up, syndesmotic ossification was more common in the SR-PLA70 group (5 versus 1 patient, not significant). Radiologically, the screw channel had not disappeared in any of the patients by the 1-year follow-up., Conclusions: Both implant types proved to have good biocompatibility. SR-PLA70 and SR-PLLA screws are suitable in selected cases for the fixation of ankle fractures, but the mechanical stability of the fixation has to be carefully monitored perioperatively.

Human erythrovirus is a minute, single-stranded DNA virus causing many diseases, including erythema infectiosum, arthropathy, and fetal death. After primary infection, the viral genomes persist in solid tissues. Besides the prototype, virus type 1, two major variants (virus types 2 and 3) have been identified recently, the clinical significance and epidemiology of which are mostly unknown. We examined 523 samples of skin, synovium, tonsil, or liver (birth year range, 1913-2000), and 1,640 sera, by qualitative and quantitative molecular assays for the DNA of human erythroviruses. Virus types 1 and 2 were found in 132 (25%) and 58 (11%) tissues, respectively. DNA of virus type 1 was found in all age groups, whereas that of type 2 was strictly confined to those subjects born before 1973 (P < 0.001). Correspondingly, the sera from the past two decades contained DNA of type 1 but not type 2 or 3. Our data suggest strongly that the newly identified human erythrovirus type 2 as well as the prototype 1 circulated in Northern and Central Europe in equal frequency, more than half a century ago, whereafter type 2 disappeared from circulation. Type 3 never attained wide occurrence in this area during the past > or =70 years. The erythrovirus DNA persistence in human tissues is lifelong and represents a source of information about our past, the Bioportfolio, which, at the individual level, provides a registry of one's infectious encounters, and at the population level, a database for epidemiological and phylogenetic analyses.

Background: We investigated the effect of low-intensity ultrasound on bone healing in bioabsorbable self-reinforced poly-L: -lactic acid (SR-PLLA) screw-fixed lateral malleolar fractures. The study design was prospective, randomized, double-blind, and placebo-controlled., Methods: A total of 22 fractures were fixed with one SR-PLLA screw. All the patients were instructed to use an ultrasound device 20 min daily for 42 days without knowing whether it was active or inactive. Eleven patients had active and eleven sham ultrasound devices. The causes of error during treatment with head module placement and attachment to the convex surface of the lateral distal fibula were minimized by careful targeting and using coupling gel. Radiological fracture healing was assessed by radiographs and multidetector computed tomography (CT) scans in a blinded manner by a radiologist and orthopedic surgeons., Results: The overall compliance to the daily ultrasound treatments was good. All wounds healed uneventfully, and no foreign body reactions were observed. No difference was observed between the groups regarding either fracture line visualization or callus formation assessed by plain radiographs. In the CT images at 9 weeks, the share of the endosteal united fracture line compared to the non-united fracture line was slightly higher in the active ultrasound device group than in the sham ultrasound device group, but the difference was not statistically significant., Conclusion: The study indicates that the biocompatibility of ultrasound therapy and bioabsorbable SR-PLLA screw fixation is good. There was no obvious effect of low-intensity ultrasound on lateral malleolar fracture healing. However, the relatively small number of patients must be kept in mind when interpreting our results. It is also important to limit any conclusions based on the present study to malleolar fractures fixed with the SR-PLLA screw.

Introduction: There are no previous reports of low intensity pulsed ultrasound therapy in connection with bioabsorbable fracture fixation. In this randomised, prospective, double-blind and placebo-controlled study, the effects of ultrasound on bone mineral density and bone healing were examined in lateral malleolar fractures fixed with a bioabsorbable self-reinforced poly-L-lactide screw (SR-PLLA)., Materials and Methods: Thirty adult patients with SR-PLLA screw-fixed lateral malleolar fracture underwent ultrasound therapy 20 min daily for 6 weeks. Half of the patients were provided randomly with a sham ultrasound device. Bone mineral density and bone healing were assessed by dual-energy X-ray absorptiometry (DXA) and by radiographs., Results: Bone mineral density of the fractured lateral malleolus tended to increase slightly during 12 weeks of follow-up. The increase was symmetrical and statistically non-significant between the ultrasound and non-ultrasound group. All the fractures healed uneventfully. The biocompatibility of the bioabsorbable SR-PLLA fixation device and low intensity pulsed ultrasound was good. Despite the slight tendency for more frequent callus formation in the ultrasound group, no statistically significant effect of low intensity pulsed ultrasound on lateral malleolar fracture healing could be observed., Conclusion: It was not possible to observe any statistically significant effect of low intensity pulsed ultrasound on lateral malleolar fracture healing in this study. Further studies are needed to examine the role of ultrasound therapy in the healing of fractures treated with bioabsorbable fixation devices.

Porous hydroxyapatite HA blocks reinforced with poly-l/dl-lactide fibres were used to maintain the lumbar disc space and to start to create intercorporeal fusion in 23 growing pigs. In four pigs two emptied non adjacent disc spaces were left open. After 3, 6, 12 and 16 weeks the implanted disc blocks were studied radiologically, histologically, histomorphometrically, microradiographically, and with oxytetracycline fluorescence. In plain films slight to moderate ossification of the implanted disc spaces was detected at 12 and 16 weeks. Resorption of the implants was seen radiologically from 3 weeks and fragmentation from 12 weeks onwards. In microradiographs disintegration of the coralline inner structure started at 3 weeks. Histologically, connective tissue ingrowth was seen inside the porous structure from three weeks onwards. Small amounts of new bone were visible and connective tissue inside the implant increased from a mean of 65.6% at 3 weeks to a mean of 79.4% at 16 weeks histomorphometrically. The bone ingrowth varied from 0.7 to 1.7%. A loss of height in the implanted disc spaces was seen (p < 0.05, linear regression analysis). In control pigs the emptied disc spaces lost their height similarly. The implants used were not strong enough to maintain the lumbar disc height.

Background and Aims: The present study was initiated to evaluate the long-term effects of low-intensity ultrasound therapy on bioabsorbable screw-fixed lateral malleolar fractures, which has not been studied earlier., Patients and Methods: The study design was prospective, randomized, double-blinded, and placebo-controlled. Sixteen dislocated lateral malleolar fractures were fixed with one bioabsorbable self-reinforced poly-L-lactide screw. The patients used an ultrasound device 20 minutes daily for six weeks without knowing it was active (eight patients) or inactive (eight patients). The follow-up time was 18 months. The radiological bone morphology was assessed by multidetector computed tomography (MDCT) scans, the bone mineral density by dual-energy X-ray absorptiometry scans, and the clinical outcome by Olerud-Molander scoring and clinical examination of the ankle., Results: The MDCT scans revealed that all fractures were fully healed, and no differences were observed in radiological bone morphology at the fracture site. The bone mineral density of the fractured lateral malleolus tended to increase slightly during the 18-month follow-up, the increase being symmetrical in both groups. No differences were observed in the clinical outcome or Olerud-Molander scores., Conclusions: The six-week low-intensity ultrasound therapy had no effect on radiological bone morphology, bone mineral density or clinical outcome in bioabsorbable screw-fixed lateral malleolar fractures 18 months after the injury.

TT virus (TTV) is a newly discovered human virus of high genotypic diversity. TTV is widely distributed among humans, but the possible genotype-related differences in TTV biology are not well known. The prevalence and amount of TTV-DNA, especially of genotype 6, was determined by nested-PCR in various human tissues, and human parvovirus B19, another ssDNA virus, was used as a reference. TTV DNA was detected simultaneously in bile, peripheral blood mononuclear cells (PBMC) and plasma of 77% subjects, in 38% skin samples, in 38% synovial samples and in all (100%) adenoids, tonsils and liver samples. The relative concentrations of TTV-DNA did not vary significantly among the different samples. Genotype 6 TTV-DNA was detected in bile and plasma of one subject (3%), in skin and serum of one subject (8%) and in one liver (5%). The overall prevalence of TTV genotype 6 was 4% in subjects and 4% in sera. TTV genotype 6 was shown to occur in human tissues with no obvious tissue-type or symptom specificity. Parvovirus B19 DNA was detected overall in 38% subjects, and bile was the only sample type tested that did not persistently harbour B19 DNA.

Stress reactions in the bones of the lower extremities are a common finding on magnetic resonance (MR) imaging. The primary finding in the bone marrow is nonspecific edema without any visible fracture line that may even mimic tumor or infection. Continuing stress may eventually lead to a stress fracture. We present the case of a stress reaction related to breakdancing in a less typical localization, in the triquetral bone in the wrist.

Parvovirus B19 is the exclusive human pathogen of the Erythrovirus genus. In classical view, the B19 DNA sequence shows little variability, with no disease-specific or tissue type specific associations. We examined skin biopsies from patients with B19-unrelated skin disease or from constitutionally healthy adults by polymerase chain reaction assays for four different genomic regions of the B19 virus. Sequencing showed that the skin-derived viral DNA differed within the protein-coding region from the B19 reference sequences by 10.8% and from the V9 variant by 8.6% and within the noncoding region (covering nucleotides 189-435 of the promoter region) by 26.5 and 17.2%, respectively. Despite this sequence difference, the promoter region was shown by a luciferase gene expression assay to be biologically active. We have detected a new B19 virus genotype, K71, which differs extensively from the known B19-virus genotypes and is persistently carried in human skin.

The effects of low-intensity pulsed ultrasound on the mechanical and molecular properties of self-reinforced poly L-lactide (SR-PLLA) screws were studied in vitro. SR-PLLA screws of 4.5 mm diameter were exposed on low-intensity ultrasound for 1, 3. 6, 9, and 12 weeks. After exposure, the bending strength, shear strength, and molecular weight were investigated. There were no differences in the investigated properties between the ultrasound exposure and control groups. We found no evidence that low-intensity ultrasound has any effect on the mechanical or molecular properties of SR-PLLA screws in vitro. The present results suggest that biodegradable SR-PLLA fixation devices are compatible with low-intensity ultrasound in vitro.

Subcapital femoral osteotomies of ten young adult sheep were fixed with two bioabsorbable, self-reinforced, poly- L-lactide (SR-PLLA) lag screws of 4.5 mm in diameter. At 3 weeks radiographs were taken to check the reduction and fixation achieved. After follow-up periods of 12 weeks, 1 year and 3 years with three sheep in each group, and of 7 years and 4 months with one sheep, the sheep were killed, and the healing of the osteotomies, degradation and tissue response of the implants were examined radiographically, histologically and microradiographically. All osteotomies healed with a firm bony union. There was no dislocation or wound infection. Histologically, there was no marked tissue response in the bone tissue. At 12 weeks the implants were grossly intact, at 1 year granulation tissue and new bone formation had started to penetrate into the implant, and at 3 years the implant area was mostly replaced by connective tissue and new bone, but implant material was still seen as little islands surrounded by some lymphocytes. At 7 years and 4 months, the implant material had been degraded and replaced by tight bone. Self-reinforced poly- L-lactide lag screws seem to possess adequate mechanical properties and good biocompatibility for this demanding fixation.

Sixteen patients with dislocated ankle fractures fixed between 1988 and 1991 with self-reinforced poly(L-lactide; SR-PLLA) screws and/or rods were followed up after 8.6 to 11.7 years (mean 9.6 years) at the Department of Orthopaedics and Traumatology, Helsinki University Central Hospital. In all patients accurate reduction of the fractures was retained and uneventful bony union was achieved. Good or excellent long-term functional results were observed in 15 out of 16 patients. One patient had post-traumatic osteoarthritis. In 5 patients, a late tissue reaction was observed over an extruding screw head with mild symptoms, which led to removal of small palpable masses. There were two superficial wound infections, one after a primary operation and one caused by a late tissue reaction after an operation. The correct operative technique, where all extruding extraosseous SR-PLLA material should be removed during the primary operation, should be followed.

Background and Aims: Poly-L-lactide implants have gained popularity in the fixation of fractures and osteotomies in the past decade. The aim of the present experimental long-term study was to examine the degradation and strength retention of self-reinforced poly-L-lactide (SR-PLLA) lag-screws and the bone tissue response., Material and Methods: A total of 27 young adult sheep were used. Self-reinforced poly-L-lactide (SR-PLLA) lag-screws of 6.3 mm were implanted in the left proximal femur of nine sheep. At two, three and five years three of the sheep were sacrificed and the degradation was studied radiologically, microradiographically and histologically. For the strength retention measurements five SR-PLLA lag-screws of 6.3 mm and five lag-screws of 4.5 mm were implanted in the subcutaneous tissue of the five sheep and lag-screws of 6.3 mm for the pull-out test in the left proximal femur of 20 sheep. At 0, 12, 18, 24, 32, and 36 weeks bending and shear strength, molecular weight and pull-out measurements were performed., Results: At five years no SR-PLLA material could be seen. The implant area was surrounded by high density bone with bone ingrowth in the screw area. At 36 weeks the bending strength of the 6.3 mm screws had decreased from 257.9 MPa to 36.4 MPa and the shear strength from 131.8 MPa to 19.8 MPa. The pull-out strength of the lag-screws of 6.3 mm in diameter decreased from 1507 N to 331 N in 24 weeks., Conclusions: SR-PLLA lag-screws showed high initial values, a controlled strength retention and gradual degradation process making the use of them safe also in demanding fixations.

Bioabsorbable internal fixation devices were introduced clinically in the treatment of fractures and osteotomies of the extremities at the Department of Orthopaedics and Traumatology, Helsinki University, in 1984. Since November 5, 1984, a total of 3200 patients were managed using bone or ligament fixation devices made of self-reinforced (matrix and fibres of the same polymer) bioabsorbable alpha-hydroxy polyesters. The devices used included cylindrical rods, screws, tacks, plugs, arrows, and wires. The most common indication for the use of bioabsorbable implants was the displaced malleolar fracture of the ankle. Transphyseal fixation with small-diameter, mainly polyglycolide pins was used in children. The postoperative clinical course was uneventful in more than 90% of the patients. The complications included bacterial wound infection in 4% and failure of fixation in 4%. In one-fifth of the latter cases, however, re-operation was not necessary. The occurrence of non-infectious foreign-body reactions two to three months postoperatively has been observed in 2% of the patients operated in the last few years with polyglycolide implants but none of the patients managed with polylactide implants. This inflammatory tissue response often required aspiration with a needle but did not influence the functional or radiologic result of the treatment. Owing to the biodegradability of these internal fixation devices, implant removal procedures were avoided. This results in financial benefits and psychological advantages. Bioabsorbable implants can also be used in open fractures and infection operations.

Primary infection by human parvovirus B19 is often accompanied by arthropathy of varying duration, of which the most severe cases can be indistinguishable from rheumatoid arthritis (RA). While this might seem to imply a role in RA pathogenesis, recent studies have verified long-term persistence of B19 DNA in synovial tissue not only in patients with rheumatoid or juvenile arthritis, but also in immunocompetent, non-arthritic individuals with a history of prior B19 infection. However, the latter data are based on PCR amplification of short segments of DNA, with little sequence information. We determined the nucleotide sequence and examined the integrity of the protein-coding regions of B19 genomes persisting in synovial tissue and compared the results with data from synovial tissues of recently infected patients. In synovium of both previously and recently infected subjects, the viral coding regions were found to be present in an apparently continuous, intact DNA molecule. Comparison with sequences reported from blood or bone marrow showed that the synoviotropism or persistence of the B19 virus DNA was not due to exceptional mutations or particular genotype variants. The synovial retention of full-length viral genomes may represent a physiological process functioning in long-term storage of foreign macromolecules in this tissue.

Background and Aims: Cancellous bone fractures and arthrodeses have been treated successfully with bioabsorbable polyglycolide and poly-L-lactide implants. In this study bioabsorbable poly-L-lactide lag screws and metallic screws were compared in the fixation of subcapital femoral neck fractures., Patients and Methods: Forty patients with femoral neck fractures were treated by internal fixation using three bioabsorbable self-reinforced poly-L-lactide (SR-PLLA) lag screws of 6.3 mm in diameter and 38 patients using three metallic screws of 7 mm in diameter. In addition, one patient was operated on using two and one using four metallic screws. The patients did not differ in age, body weight or primary dislocation of the fracture. There were six males in the lactide group versus 14 in the metallic fixation group. There were two Garden Stage I, 27 Garden Stage II, nine Garden Stage III, and two Garden Stage IV fractures in both groups., Results: In the Garden I and II fractures there were 5/29 redislocations after SR-PLLA fixation and 8/29 after metallic fixation. In the Garden III fractures there were 4/9 and in the Garden IV fractures 2/2 redislocations in both groups. The ability to walk and the range of movement were better after bioabsorbable fixation., Conclusion: Self-reinforced poly-L-lactide lag screws can be used safely to fix subcapital femoral neck fractures in Garden Stage I and II fractures and in younger patients in Garden III fractures.

Purpose: Osteosynthesis by means of bioresorbable implants, mostly of self-reinforced poly-L-lactide (SR-PLLA), has been used in humans for about 10 years. The aim of this study was to examine the controversy between histological studies confirming fragmentation of the biomaterial and radiological studies showing no breaking of the material., Material and Methods: Six patients with displaced malleolar fractures operatively treated with biodegradable SR-PLLA screws underwent MR examinations at 1.5 T, immediately postoperatively and after one to two years., Results: The biodegradable osteosynthetic screws were clearly seen on all MR images. Of 12 screws, 6 were broken at the final examination (5 syndesmotic transfixation screws and 1 screw through the growth cartilage)., Conclusion: The breaking of a biodegradable osteosynthesis is possible to document on MR images.

In a preliminary study, 24 patients with rupture of the anterior cruciate ligament (ACL) were operated on using implants made of self-reinforced poly-l-lactide (SR-PLLA). The operation method was outside-in bone-tendon-bone reconstruction. In 10 patients the fixation was made with an SR-PLLA screw with a diameter of 6.3 mm, in 12 with an SR-PLLA expansion plug with a diameter of 6.0 mm, and in two cases both implants were used, but these cases were excluded from comparison. The purpose of the study was to evaluate and compare the use and fixation results of these two implants. The follow-up time averaged 3.2 years. Twenty patients attended follow-up. On subjective evaluations, seven of the eight patients following SR-PLLA screw fixation and six of the ten after expansion plug fixation regarded their knee as normal or nearly normal. Arthrometric testing showed the side-to-side difference to average 2. 9 mm following SR-PLLA screw fixation and 2.6 mm after expansion plug fixation (NS). Six of the patients had giving-way symptoms (two after screw fixation and four after plug fixation). The pivot shift test was slightly positive in two patients and positive in one patient after SR-PLLA screw fixation, and in three knees slightly positive and in another three knees positive following expansion plug fixation. Radiography showed variation in the location and orientation of the bone channels. Magnetic resonance imaging was performed in seven cases, and in two cases an edema was found in the tendon of the anterior cruciate ligament graft and in six cases the implants were visible. No statistical difference in results between the SR-PLLA screw and SR-PLLA expansion bolt was noted. Fixation with expansion plug seems technically more challenging, with a tendency to inferior results compared to screw fixation. In the absorbable fixation of a bone-tendon-bone graft there are no metallic artifacts on magnetic resonance imaging and no need to remove the fixation material regarding the revision surgery.

Background and Aims: Fracture of the femoral head associated with a traumatic dislocation of the hip is a rare but severe injury. The methods of the recommended treatment have varied from primary closed or open reduction without fixation to excision of fragments or internal fixation. In our department we have treated other kinds of intra-articular fractures successfully with totally absorbable polyglycolide and poly-L-lactide implants. The aim of this study was to investigate the value of totally absorbable rods and screws in the fixation of the femoral head fractures., Material and Methods: Six femoral head fractures associated with a posterior traumatic dislocation of the hip were treated by open reduction and internal fixation using self-reinforced absorbable polyglycolide (SR-PGA) or poly-L-lactide (SR-PLLA) rods and screws. The follow-up time was 38 months in average (range 6 weeks to 77 months)., Results: In three patients the end results were excellent and in one fair. One patient died six weeks after the accident from the consequences of the cerebral injury. In one 61-year-old patient an arthroplasty was performed one year after the primary osteosynthesis, because of avascular necrosis of the femoral head., Conclusions: Self-reinforced polyglycolide and polylactide implants can be used safely to fix femoral head fractures without the need of implant removal.

Background and Aims: In periprosthetic fracture associated with hip arthroplasty, no consensus exists about the use of plate fixation or revision stem except for cases where the stem is loose in a young patient and a revision is made. The aim of the present retrospective study was to compare two commonly used alternatives for treatment of the fracture--revision arthroplasty and plate fixation., Material and Methods: Seventy-five fractures associated with total hip arthroplasty were treated with revision arthroplasty (N = 40) or compression plate fixation (N = 35). Twenty-one fractures were intraoperative and 54 were postoperative. In revision arthroplasty, cemented (N = 11) and porous-coated (N = 29) stems were sued. Autologous bone grafts were used in 15 revision arthroplasties and 20 plate fixations. The follow-up time was median 20 months (range 12-96 months)., Results: Bone grafting at the time of fracture treatment had no significant effect on fracture healing in the present setting. One patient in both groups was operated secondarily because of fracture instability. Five nonunions in the former and 9 nonunions in the latter group were treated by repeated revision and bone graft. In two revision arthroplasties and nine cases with plate fixation, a secondary bone grafting operation was performed for delayed union. In all, 20 secondary operations were needed after prosthesis stem revision and 27 secondary operations after plate fixation (p = 0.014). The need for reoperations was similar in fractures at different levels of the femur. Fracture healing was finally obtained in 39 revision arthroplasties and 34 cases with plate fixation during the follow-up period., Conclusions: Cases where the prosthesis stem is stable, where its removal would include great risks and, where the biomechanical conditions are optimal, are best treated with plate fixation. In cases where the stem is loose and where a choice is possible, stem revision is preferable to plate fixation.

Absorbable fixation devices have been clinically used in the fracture treatment for over ten years. No studies have been published where bone mineral density has been measured after bone consolidation comparing absorbable and metallic fixation. In this study the bone mineral density was measured after operative ankle fracture treatment with absorbable self-reinforced polyglycolic acid (SR-PGA) screws (14 patients) or with absorbable self-reinforced polylactic acid (SR-PLLA) screws (eight patients) compared with metallic fixation (17 patients). The overall results were radiologically good in every group. A statistically significant difference in the bone mineral density (BMD) was found only in the distal tibial metaphysis between SR-PGA screw and metallic fixation. The BMD increased in the distal tibia after SR-PGA screw fixation by an average 18.3%. The average change of BMD in the distal tibia after SR-PLLA screw fixation decreased by 6.4% while after metallic fixation the average change of MBD decreased by 18.6%. Bone mineral density measurements in the present study may indicate osteogenetic capacity of polyglycolide implants in the bone after fracture or osteotomy fixation. On the other hand, metallic implants showed negative effects to the bone.

Nine adolescent patients with a femoral fracture involving the physeal plate were treated by using self-reinforced absorbable polyglycolide (SR-PGA) and poly-L-lactide (SR-PLLA) screws with a follow-up for an average of 2 years and 2 months. During the follow-up all but one of the femurs became skeletally mature. In two of nine patients a clinically significant growth disturbance occurred. The average length difference of the femurs was -5 mm (ranging from +8 mm(-)-41 mm). One valgus deformity was noted. In four patients a lengthening and in four patients a shortening of the operated femur were registered at the end of follow-up. Open reduction and fixation with absorbable screws seem to be suitable for the fixation of distal femoral fractures in adolescents.

Seven subcapital femoral osteotomies of adult sheep were each fixed with two absorbable self-reinforced poly-L-lactide lag-screws, and seven other osteotomies were each fixed with two metallic cancellous bone screws. At 3 and 12 weeks, radiographs were taken and callus formation, displacement, and union were evaluated. At 12 weeks, the animals were killed and strength measurements were carried out. According to the radiographs, union was achieved in six of seven osteotomies in both groups, while after 3 weeks one fixation in both the group treated with absorbable screws and the group treated with metallic screws had failed. There were no statistical differences between the groups with respect to callus formation or displacement. Regarding the strength of the osteotomized bones, at 12 weeks there were no statistically significant differences in the load-carrying capacity between the bones fixed with self-reinforced poly-L-lactide screws and those fixed with metallic screws. These results showed that self-reinforced poly-L-lactide screws, which have been used successfully in fractures and osteotomies in cancellous bone, are strong enough to support this more demanding fixation of weight-bearing bones.

In a bovine cadaver study, bone-tendon-bone graft fixation strength with different graft geometry and fixation devices was measured to evaluate the fixation strength of totally absorbable implants: a 6.0-mm expansion plug and 6.3-mm screw both made of self-reinforced polylactide (SR-PLLA). Comparison was made with 6.5-mm AO cancellous screw. Maximum tensile force to dislodge the bone plug from the bone tunnel was recorded. First, two preliminary tests were performed. In the first test, triangular bone plugs were used (9-mm diameter). The direction of the pull force was parallel to the bone tunnel. The maximum tensile forces were 786 N in femoral insertions and 625 N in tibial insertions, mean. After this, we evaluated the influence of change in the pullout direction. In the second test, a circular bone plug was used with no fixation but the direction of the pull force was parallel to the tibial or femoral axis and the bone plug (10-mm diameter) was in a 30 degrees to 40 degrees angle to the direction of the pull force and it was compressed to the tunnel (9-mm diameter). The maximum tensile forces were 783 N in femoral insertions and 695 N in tibial insertions, mean. In the final third test, we used a curved saw in harvesting the graft. This made a half-circular bone block with a diameter of 12 mm. The maximum tensile force to dislodge the bone plug from the bone tunnel was recorded and the pull force was in a 30 degrees to 40 degrees angle to the tunnel. The results were evaluated with Student's t-test and Mann-Whitney U-test. With the AO screw, the maximum tensile force to dislodge the bone plug from the bone tunnel was 2,113 +/- 407 N (mean +/- standard deviation) and it was better than the fixation strength of the SR-PLLA expansion plug, 1,379 +/- 328 N (P = .009, t-test) and better than the fixation strength of SR-PLLA screw, 1,454 +/- 230 N (P = .007, t-test). However, the maximum tensile force of both SR-PLLA implants in all measurements in the third test were above 1,100 N and it seems that the initial strength of totally absorbable implants is enough for the clinical use.

Totally absorbable internal fracture fixation devices were introduced clinically in the treatment of fractures and osteotomies of the extremities at our department in 1984. A total of 2,500 patients were managed using bone or ligament fixation devices made of self-reinforced (matrix and fibers of same polymer) absorbable alpha-hydroxy polyesters between November 5, 1984, and January 12, 1994. The devices used included cylindrical rods or pins, screws, tacks, plugs, and wires. The most common indication for the use of absorbable implants was displaced malleolar fracture of the ankle. Transphyseal fixation with small-diameter polyglycolide pins was used in children. The postoperative clinical course was uneventful in over 90% of the patients. The complications included bacterial wound infection in 3.6% and failure of fixation in 3.7%. In one-fifth of these cases, however, reoperation was not necessary. The occurrence of noninfectious foreign-body reactions 2 to 3 months postoperatively has been observed in 2.3% of the patients operated in the last years with polyglcolide implants but in none of the patients with polylactide implants. This inflammatory tissue response often required aspiration with a needle or small incision but did not influence the ultimate functional or radiologic result of treatment. Owing to the biodegradability of these internal fixation devices, over 1,000 implant removal procedures were avoided during the 9-year period under review, allowing medical personnel at these facilities to focus on other procedures. Avoidance of removal procedures results in financial benefits and psychological advantages. The benefits of absorbable implants for war surgery are the same as for civilian life. Absorbable implants can also be used in open fractures and infection operations.

Twenty-one patients, 11 male and nine female, with fracture of medial humeral epicondyle were treated. The mean age of the patients was 21 (range 8-52) years. The average initial displacement was 13 (range 3-24) mm, and four out of 21 patients had a dislocation of the elbow joint. Two patients were first treated conservatively, but later on operation for removal of the non-united fragment and reattachment of the ligaments and muscles was necessary. One patient was treated by primary excision of the fragment. Eighteen patients were treated by open reduction and internal fixation using self-reinforced polyglyclycolide (SR-PGA) screws in five patients, poly-l-lactide (SR-PLLA) screw in one, small (SR-PGA) rods in seven and Kirschner-wires in five patients. Solid union took place in 14 out of 18 patients and a good stability of the elbow joint was achieved. Fifteen patients scored an excellent result according to the scale of Broberg and Morrey. Although this series was not randomly allocated in respect of the method of treatment, it shows that medial epicondylar fractures can be fixed with absorbable implants without any need for removal procedure.

Biodegradable self-reinforced polyglycolide screws and rods were constructed for internal fixation of fractures in cancellous bone. The self-reinforced texture was achieved by embedding polyglycolide fibres in a polyglycolide matrix. In a prospective clinical study, a total of 37 patients at least 65 years of age with displaced malleolar fractures were managed by open reduction and internal fixation using either biodegradable screws and rods or metallic implants in a randomly allocated series. The results were assessed approximately one year after the fracture. One wound infection occurred after metallic fixation. Reoperation because of displacement of the fracture was needed in one patient after biodegradable fixation. The functional results were satisfactory in most patients. There were no major difference in the end results between both operative methods used.

Totally absorbable internal fixation devices have been used in a total of 2114 operations for the treatment of fractures, arthrodeses and osteotomies at our department between November 1984 and December 1992. The infection rate was 3,5%, for pure polyglycolide (PGA) implants 4% and for pure polylactide (PLLA) implants 0,7%. When the fixation with absorbable implants was compared to that of metallic implants in another series the infection rates were 4% and 9%, respectively. This difference was due to technical reasons. Sinus formation due to a foreign body reaction was observed in 2,5% of 2114 cases and was subsequently infected in 20%.

The clinical biocompatibility and degradation behavior of absorbable fracture fixation devices are still incompletely known in humans. Fifty-one patients with displaced fracture of the ankle treated by open reduction and internal fixation with absorbable screws made of polylevolactide were seen in followup for at least 3 years. The mean duration of followup time was 52 months. The tissue tolerance and degradation of the devices were studied clinically and radiographically using computed tomographic scans. In addition, biopsy specimens for histologic examination were taken in 5 patients. The screws were clinically effective: An accurate position of the fragments was maintained until union in 50 patients. A mild transient subcutaneous late foreign body reaction occurred in 1 patient 22 months after fixation of the fracture. Despite radiographic evidence of an advancing degradation of the implants, biopsy specimens taken 45 months after the original operation still showed consistent areas of polylactide in the tissues. In 3 patients, a disturbing palpable subcutaneous screw head had to be removed. The incidence of foreign body reactions to polylevolactide screws in the ankle seems to be low, but the duration of the degradation process of the polymer in human tissues is considerably longer than has been anticipated.

71 patients with displaced ankle fracture were treated by using absorbable screws in the fixation of fractures. The follow-up time was 17 (13 to 33) months in average. The fixation devices were SR-PLLA (self-reinforced poly-L-lactide) and SR-PGA (self-reinforced polyglycolide) screws. 38 of the ankle fractures were immobilized with plaster cast and 33 ankle joints were mobilized immediately with a brace. An exact radiological result was achieved in 66 cases, insignificant displacement was observed in four cases and the result was poor in one patient. The result was classified as excellent in 62 patients, as good in eight patients and as poor in one patient. The patients treated postoperatively without plaster healed in a somewhat shorter time, but at one year check-up the differences in the clinical results were almost eliminated. Selected ankle fractures fixed with absorbable screws can be treated postoperatively with early mobilization without plaster.

Seven patients with spastic neuromuscular disease and severe hindfoot valgus deformity were treated by subtalar arthrodesis. Arthrodesis was performed in both feet at the same operation and fixed on one side with a self-reinforced poly-L-lactide (SR-PLLA) screw, and with a standard AO screw on the other side. The functional status state was improved, and radiographic union of the arthrodesis occurred in all feet. The radiograph showed better solid fusion in five feet treated with PLLA screws, similar fusion in both sides in one patient, and one slower fusion in the side treated initially with a PLLA screw. Totally absorbable SR-PLLA screws appear to be firm enough for fixation of subtalar extraarticular arthrodesis in children.

In 11 patients, 12 arthrodeses of the ankle joint were performed by using absorbable self-reinforced poly-l-lactide (SR-PLLA) or polyglycolide (SR-PGA) screws. 8 patients had posttraumatic arthrosis, 3 rheumatoid arthritis, and 1 rigid flexion contracture of the ankle due to neuropathy. The average follow-up time was 14 (7-22) months. Solid fusion was achieved in 11 of 12 cases in 9(6-16) weeks.

The series consisted of 152 patients with ankle fractures treated between May 1987 and August 1989 using absorbable screws of self-reinforced polyglycolide 3.4 mm in inner diameter and 25-70 mm in length. The mean follow-up time was 2 years, 5 months (range, 1 year, 7 months-3 years, 10 months). After open reduction, a channel was drilled through the fracture surfaces and the fragments were fixed with one absorbable screw or screws. A plaster cast was used postoperatively. At 1-year follow-up observation, the radiographical result was anatomical in 93.3% of 104 patients with unimalleolar and bimalleolar ankle fractures (Weber A or B) and in 80.5% of 41 severe ankle fractures. Seven patients were unavailable for follow-up observation. Two reoperations were performed because of primary or secondary failure of fixation. In all unimalleolar and bimalleolar fractures and in 95.1% of severe ankle fractures the functional recovery score was at least satisfactory. Sinus formation as a sign of tissue reaction was observed in 10 patients 2-6 months postoperatively, but this did not influence the healing of the fracture or the functional recovery. This report is the first extensive publication on the clinical use of absorbable screws.