Search

In closed-loop wireless control systems, the state-of-the-art approach prescribes that a controller receives by wireless communications the individual sensor measurements, and then sends the computed control signal to the actuators. We propose an over-the-air controller scheme where all sensors attached to the plant simultaneously transmit scaled sensing signals directly to the actuator; then the feedback control signal is computed partially over the air and partially by a scaling operation at the actuator. Such over-the-air controller essentially adopts the over-the-air computation concept to compute the control signal for closed-loop wireless control systems. In contrast to the state-of-the-art sensor-to-controller and controller-to-actuator communication approach, the over-the-air controller exploits the superposition properties of multiple-access wireless channels to complete the communication and computation of a large number of sensing signals in a single communication resource unit. Therefore, the proposed scheme can obtain significant benefits in terms of low actuation delay and low wireless resource utilization by a simple network architecture that does not require a dedicated controller. Numerical results show that our proposed over-the-air controller achieves a huge widening of the stability region in terms of sampling time and delay, and a significant reduction of the computation error of the control signal.

In the aeronautics industry, wireless avionics intra-communications have a tremendous potential to improve efficiency and flexibility while reducing the weight, fuel consumption, and maintenance costs over traditional wired avionics systems. This survey starts with an overview of the major benefits and opportunities in the deployment of wireless technologies for critical applications of an aircraft. The current state-of-art is presented in terms of system classifications based on data rate demands and transceiver installation locations. We then discuss major technical challenges in the design and realization of the envisioned aircraft applications. Although wireless avionics intra-communication has aspects and requirements similar to mission-critical applications of industrial automation, it also has specific issues such as complex structures, operations, and safety of the aircraft that make this area of research self-standing and challenging. To support the critical operations of an aircraft, existing wireless standards for mission-critical industrial applications are briefly discussed to investigate the applicability of the current solutions. Specifically, IEEE 802.15.4-based protocols and Bluetooth are discussed for low data rate applications, whereas IEEE 802.11- based standards are considered for high data rate applications. Eventually, we propose fundamental schemes in terms of network architecture, protocol, and resource management to support the critical avionics applications and discuss the research directions in this emerging area.

Wireless networked control systems (WNCS) are composed of spatially distributed sensors, actuators, and con- trollers communicating through wireless networks instead of conventional point-to-point wired connections. Due to their main benefits in the reduction of deployment and maintenance costs, large flexibility and possible enhancement of safety, WNCS are becoming a fundamental infrastructure technology for critical control systems in automotive electrical systems, avionics control systems, building management systems, and industrial automation systems. The main challenge in WNCS is to jointly design the communication and control systems considering their tight interaction to improve the control performance and the network lifetime. In this survey, we make an exhaustive review of the literature on wireless network design and optimization for WNCS. First, we discuss what we call the critical interactive variables including sampling period, message delay, message dropout, and network energy consumption. The mutual effects of these communication and control variables motivate their joint tuning. We discuss the effect of controllable wireless network parameters at all layers of the communication protocols on the probability distribution of these interactive variables. We also review the current wireless network standardization for WNCS and their corresponding methodology for adapting the network parameters. Moreover, we discuss the analysis and design of control systems taking into account the effect of the interactive variables on the control system performance. Finally, we present the state-of-the-art wireless network design and optimization for WNCS, while highlighting the tradeoff between the achievable performance and complexity of various approaches. We conclude the survey by highlighting major research issues and identifying future research directions., Comment: 37 pages, 17 figures, 4 tables