Search

Exploring bifunctional electrocatalysts to lower the activation energy barriers for sluggish electrochemical reactions for both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of great importance in achieving lower energy consumption and higher conversion efficiency for future energy conversion and storage system. Despite the excellent performance of precious metal-based electrocatalysts for OER and ORR, their high cost and scarcity hamper their large-scale industrial application. As alternatives to precious metal-based electrocatalysts, the development of earth-abundant and efficient catalysts with excellent electrocatalytic performance in both the OER and the ORR is urgently required. Herein, we report a core–shell CoFeS2@CoS2 heterostructure entangled with carbon nanotubes as an efficient bifunctional electrocatalyst for both the OER and the ORR. The CoFeS2@CoS2 nanocubes entangled with carbon nanotubes show superior electrochemical performance for both the OER and the ORR: a potential of 1.5 V (vs. RHE) at a current density of 10 mA cm−2 for the OER in alkaline medium and an onset potential of 0.976 V for the ORR. This work suggests a processing methodology for the development of the core–shell heterostructures with enhanced bifunctional performance for both the OER and the ORR. [ABSTRACT FROM AUTHOR]

Thin film-based optical sensors have been attracting increasing interest for use in developing technologies such as biometrics. Multilayered dielectric thin films with different refractive indices have been utilized to modulate the optical properties in specific wavelength bands for spectral selectivity of Thin Film Narrow Bandpass Filters (TFNBFs). Progress in TFNBF design has been made with the incorporation of metallic thin films. Narrower bandwidths with higher transmittance have been achieved in specific spectral bands. In this work, Ti/TiO2/SiO2 based multilayer thin films were prepared using pulsed-DC reactive sputtering. Computer simulations using the Essential Macleod Program allowed the optimal number of layers and thickness of the multilayer thin films to be determined to efficiently tailor the optical path transmitting specific wavelength bands. The addition of Ti metal layers within dielectric (TiO2/SiO2) multilayer thin films significantly changes the cutoff frequency of transmittance at specific wavelengths. Representative 26 multilayer films consisting of Ti, TiO2, and SiO2 show lower transmittance of 10.29% at 400 nm and 10.48% at 680 nm. High transmittance of 80.42% at 485 nm was observed, which is expected to improve the spectral selectivity of the TFNBF. This work provides a contribution to future simulation based design strategy based on experimental thin film engineering for potential industrial development opportunities such as optical biometrics. [ABSTRACT FROM AUTHOR]

Recent technological progress towards the application of wearable electronic devices has prompted the development of flexible electrodes. To date, various technical approaches to improve the mechanical and electrical reliability of flexible electrodes have been reported; however, the transition from lab-scale processing to industrialization is still limited by complex processing steps involved in their preparation. Simple engineering steps are introduced to prepare flexible electrodes fabricated from silver-polydimethylsiloxane (Ag-PDMS) composites for wearable device applications. The electrical properties of the electrodes were investigated under stretching and bending conditions. Also, the effect of different Ag contents in the electrodes on electrical properties was investigated. As increasing the Ag content above 300 wt.%, Ag-PDMS electrodes exhibit electrical conductivity, which is closely related to the percolation threshold for the formation of a 3-D network of Ag in the PDMS matrix. Further increase of Ag content up to 450 wt.% resulted in electrical conductivity about 1000 S/cm, corresponding to an electrical resistivity of 1 mΩ cm. Furthermore, we investigated the electrical resistivity changes when repetitive stretching and bending deformation was applied. Based on the conceptual demonstration of a light-emitting diode circuit using Ag-PDMS electrodes, a simple printable electrode fabrication method can be applied to various stretchable electronic devices. [ABSTRACT FROM AUTHOR]

In this work, we prepared spinel-type NiCo2O4 (NCO) nanopowders as a low-cost and sensitive electrochemical sensor for nonenzymatic glucose detection. A facile and simple chemical bath method to synthesize the NCO nanopowders is demonstrated. The effect of pH and annealing temperature on the formation mechanism of NCO nanoparticles was systematically investigated. Our studies show that different pHs of the precursor solution during synthesis result in different intermediate phases and relating chemical reactions for the formation of NCO nanoparticles. Different morphologies of the NCO depending on pHs are also discussed based on the mechanism of growth. Electrochemical performance of the prepared NCO was characterized towards glucose, which reveals that sensitivity and selectivity of the NCO are significantly related with the final microstructure combined with constituent species with multiple oxidation states in the spinel structure. [ABSTRACT FROM AUTHOR]