Search

To design a high‐efficiency crystalline silicon (c‐Si) photocathode, the photovoltage and photocurrent generated by the device must be maximized because these factors directly affect the hydrogen evolution reaction (HER). In this study, a c‐Si p–n junction is used to enhance the photovoltage of the c‐Si photocathode, and a tapered microwire array structure is introduced to increase the photocurrent. When tapered microwire arrays are employed on the front surface of the c‐Si photocathode, a current density of ≈41.7 mA cm−2 is achieved at 0 VRHE (reversible hydrogen electrode); this current density is the highest among all reported photocathodes including c‐Si, approaching the theoretical maximum value for c‐Si. Furthermore, a Ni foil/Pt catalyst is introduced on the opposite side of the incident light, simultaneously serving as an electrocatalyst to reduce side reactions in the HER and encapsulation layer to prevent c‐Si from contacting the electrolyte. Thus, a stable device is developed using c‐Si photoelectrochemical cells that have an efficiency exceeding 97% for >1000 h. [ABSTRACT FROM AUTHOR]

To address the recent increase in wildfire severity and incidence, as well as the subsequent financial and physical costs, forest managers and wildland firefighting agencies rely on remotely sensed products for better decision-making and mitigation efforts. To address the remote sensing needs of these agencies, which include high spatial resolution, immunity to atmospheric and solar illumination effects, and day/night capabilities, the use of synthetic aperture radar (SAR) is under investigation for application in current and upcoming systems for all phases of a wildfire. Focusing on the active phase, a method for monitoring wildfire activity is presented based on changes in the radar vegetation index (RVI). L-band backscatter measurements from NASA/JPL's UAVSAR instrument are used to obtain RVI images on multiple dates during the 2020 Bobcat (located in Southern CA, USA) and Hennessey (located in Northern CA, USA) fires and the 2021 Caldor (located in the Sierra Nevada region of CA, USA) fire. Changes in the RVI between measurement dates of a single fire are then compared to indicators of fire activity such as ancillary GIS-based burn extent perimeters and the Landsat 8-based difference normalized burn ratio (dNBR). An RVI-based wildfire "burn" detector/index is then developed by thresholding the RVI change. A combination of the receiver operating characteristic (ROC) curves and F1 scores for this detector are used to derive change detection thresholds at varying spatial resolutions. Six repeat-track UAVSAR lines over the 2020 fires are used to determine appropriate threshold values, and the performance is subsequently investigated for the 2021 Caldor fire. The results show good performance for the Bobcat and Hennessey fires at 100 m resolution, with optimum probability of detections of 67.89% and 71.98%, F1 scores of 0.6865 and 0.7309, and Matthews correlation coefficients of 0.5863 and 0.6207, respectively, with an overall increase in performance for all metrics as spatial resolution becomes coarser. The results for pixels identified as "burned" compare well with other fire indicators such as soil burn severity, known progression maps, and post-fire agency publications. Good performance is also observed for the Caldor fire where the percentage of pixels identified as burned within the known fire perimeters ranges from 37.87% at ~5 m resolution to 88.02% at 500 m resolution, with a general increase in performance as spatial resolution increases. All detections for Caldor show dense collections of burned pixels within the known perimeters, while pixels identified as burned that lie outside of the know perimeters have a sparse spatial distribution similar to noise that decreases as spatial resolution is degraded. The Caldor results also align well with other fire indicators such as soil burn severity and vegetation disturbance. [ABSTRACT FROM AUTHOR]

The so-called screening current in a high temperature superconductor (HTS) is a well-known phenomenon that has detrimental effects on performance of an HTS magnet. To date, many research efforts have been devoted to suppressing screening current in an HTS magnet. Here, we report a customized electric-heater, named "Thermal Eraser," to mitigate the screening current. The key idea is to optimally control the spatial temperature distribution in an HTS magnet using the customized heater and the consequent temperature-dependent local critical current of HTS wires of the magnet. To validate the idea, a Thermal Eraser was designed, constructed, and installed in an actual single-pancake HTS coil. The Thermal Eraser with the test coil system was operated at temperatures ranging 7–40 K in our in-house conduction-cooling cryogenic facility. The feasibility of the Thermal Eraser was demonstrated in terms of two aspects: (1) creation of the designated spatial temperature distribution within the HTS test coil as designed and (2) quantitative evaluation of its effectiveness to mitigate screening current using both experimental and numerical results. We confirmed that the screening current induced field in the test coil was reduced by 0.6 mT after activation of the Thermal Eraser, which implies 60% reduction of screening current in the HTS test coil. The results demonstrate that the Thermal Eraser is a viable option to effectively reduce the screening current in an HTS magnet. [ABSTRACT FROM AUTHOR]

Here, we report deep metal-assisted chemical etching (MACE) using a porous monolithic AgAu layer on crystalline silicon (c-Si) as an alternative to the expensive deep reactive ion etching (DRIE) for fabricating neutral-colored transparent crystalline silicon photovoltaics (c-Si TPV). To prevent the uneven etching of c-Si by Ag particles, a porous monolithic Ag layer is developed by introducing acetonitrile to enhance the interaction between the c-Si surface and Ag precursor. This results in cooperative motion during MACE, as confirmed by microscopic observation, surface area measurements, and computational simulations. The durability of this Ag catalyst can be further improved by passivation with Au via galvanic replacement (i.e., the porous monolithic AgAu layer), thereby preventing indiscriminate defect generation. Thus, the fabricated c-Si TPV using MACE and a porous monolithic AgAu layer exhibits a high performance of 13.0% with 20% neutral-colored transparency, representing results superior to those obtained with samples fabricated by DRIE (11.5%). [ABSTRACT FROM AUTHOR]