Search

Changes in sulfate (SO

Microcoils provide a cost-effective approach to improve detection limits for mass-limited samples. Single-sided planar microcoils are advantageous in comparison to volume coils, in that the sample can simply be placed on top. However, the considerable drawback is that the RF field that is produced by the coil decreases with distance from the coil surface, which potentially limits more complex multi-pulse NMR pulse sequences. Unfortunately, 1 H NMR alone is not very informative for intact biological samples due to line broadening caused by magnetic susceptibility distortions, and 1 H-13 C 2D NMR correlations are required to provide the additional spectral dispersion for metabolic assignments in vivo or in situ. To our knowledge, double-tuned single-sided microcoils have not been applied for the 2D 1 H-13 C analysis of intact 13 C enriched biological samples. Questions include the following: Can 1 H-13 C 2D NMR be performed on single-sided planar microcoils? If so, do they still hold sensitivity advantages over conventional 5 mm NMR technology for mass limited samples? Here, 2D 1 H-13 C HSQC, HMQC, and HETCOR variants were compared and then applied to 13 C enriched broccoli seeds and Daphnia magna (water fleas). Compared to 5 mm NMR probes, the microcoils showed a sixfold improvement in mass sensitivity (albeit only for a small localized region) and allowed for the identification of metabolites in a single intact D. magna for the first time. Single-sided planar microcoils show practical benefit for 1 H-13 C NMR of intact biological samples, if localized information within ~0.7 mm of the 1 mm I.D. planar microcoil surface is of specific interest.

Comprehensive multiphase NMR combines the ability to study and differentiate all phases (solids, gels, and liquids) using a single NMR probe. The general goal of CMP-NMR is to study intact environmental and biological samples to better understand conformation, organization, association, and transfer between and across phases/interfaces that may be lost with conventional sample preparation such as drying or solubilization. To date, all CMP-NMR studies have used 4 mm probes and rotors. Here, a larger 7 mm probehead is introduced which provides ∼3 times the volume and ∼2.4 times the signal over a 4 mm version. This offers two main advantages: (1) the additional biomass reduces experiment time, making 13C detection at natural abundance more feasible; (2) it allows the analysis of larger samples that cannot fit within a 4 mm rotor. Chicken heart tissue and Hyalella azteca (freshwater shrimp) are used to demonstrate that phase-based spectral editing works with 7 mm rotors and that the additional biomass from the larger volumes allows detection with 13C at natural abundance. Additionally, a whole pomegranate seed berry (aril) and an intact softgel capsule of hydroxyzine hydrochloride are used to demonstrate the analysis of samples too large to fit inside a conventional 4 mm CMP probe. The 7 mm version introduced here extends the range of applications and sample types that can be studied and is recommended when 4 mm CMP probes cannot provide adequate signal-to-noise (S/N), or intact samples are simply too big for 4 mm rotors.

Considered as a promising source of sustainable energy, biofuel produced from algae holds many advantages. However, to truly understand the production process and assess the potential for further o...

In vivo nuclear magnetic resonance (NMR) is a powerful analytical tool for probing complex biological processes inside living organisms. However, due to magnetic susceptibility broadening, which produces broad lines in one-dimensional NMR, 1H-13C two-dimensional (2D) NMR is required for metabolite monitoring in vivo. As each 2D experiment is time-consuming, often hours, this limits the temporal resolution over which in vivo processes can be monitored. Furthermore, to understand concentration-dependent responses, studies are traditionally repeated using different contaminant and toxin concentrations, which can make studies prohibitively long (potentially months). In this study, time-resolved non-uniform sampling NMR is performed in the presence of a contaminant concentration sweep. The result is that the lowest concentration that elicits a metabolic response can be rapidly detected, while the metabolic pathways impacted provide information about the toxic mode of action of the toxin. The lowest concentration of bisphenol A (BPA) that induces a response was ∼0.1 mg/L (detected in just 16 min), while changes in different metabolites suggest a complex multipathway response that leads to protein degradation at higher BPA concentrations. This proof of concept shows it is possible, on the basis of "real-time" organism responses, to identify the sublethal concentration at which a toxin impacts an organism and thus represents an essential analytical tool for the next generation of toxicity-based research and monitoring.

Used cooking oil disposal is a concern at the global scale. Direct disposal from domestic households and restaurants via drains can result in serious environmental issues. In this study, waste cooking oil was collected directly from vats in a McDonald’s restaurant and acrylated via a straightforward one-step reaction. After the addition of a photoinitiator and without any photoinhibitor, the product can be printed using a commercial 3D printer. The formulated resin produced high-resolution prints with features down to 100 micrometers. The rapid prototyped prints show considerable thermomechanical stability, morphological homogeneity, and biodegradability when compared to a state-of-the-art research resin and a commercial resin. This paper introduces the concept that waste cooking oil can be directly converted into a high-value commercial 3D-printing resin, which may have considerable societal benefits including reduction of waste and carbon emissions.

Cooking is essential for preparing starch-based food, however thermal treatment promotes the complexation of biopolymers, impacting their final properties. Comprehensive Multiphase (CMP) NMR allows all phases (liquids, gels, and solids) to be differentiated and monitored within intact samples. This study acts as a proof-of-principle to introduce CMP-NMR to food research and demonstrate its application to monitor the various phases in spaghetti, black turtle beans, and white long-grain rice, and how they change during the cooking process. When uncooked, only a small fraction of lipids and structurally bound water show any molecular mobility. Once cooked, little "crystalline solid" material is left, and all components exhibit increased molecular dynamics. Upon cooking, the solid-like components in spaghetti contains signals consistent with cellulose that were buried beneath the starches in the uncooked product. Thus, CMP-NMR holds potential for the study of food and related processes involving phase changes such as growth, manufacturing, and composting.

Microcoils provide a cost-effective approach to improve detection limits for mass-limited samples. Single-sided planar microcoils are advantageous in comparison to volume coils, in that the sample can simply be placed on top. However, the considerable drawback is that the RF field that is produced by the coil decreases with distance from the coil surface, which potentially limits more complex multi-pulse NMR pulse sequences. Unfortunately

Comprehensive multiphase (CMP) NMR, first described in 2012, combines all of the hardware components necessary to analyze all phases (solid, gel, and solution) in samples in their natural state. In combination with spectral editing experiments, it can fully differentiate phases and study the transfer of chemical species across and between phases, providing unprecedented molecular-level information in unaltered natural systems. However, many natural samples, such as swollen soils, plants, and small organisms, contain water, salts, and ionic compounds, making them electrically lossy and susceptible to RF heating, especially when using high-strength RF fields required to select the solid domains. While dedicated reduced-heating probes have been developed for solid-state NMR, to date, all CMP-NMR probes have been based on solenoid designs, which can lead to problematic sample heating. Here, a new prototype CMP probe was developed, incorporating a loop gap resonator (LGR) for decoupling. Temperature increases are monitored in salt solutions analogous to those in small aquatic organisms and then tested in vivo on Hyalella azteca (freshwater shrimp). In the standard CMP probe (solenoid), 80% of organisms died within 4 h under high-power decoupling, while in the LGR design, all organisms survived the entire test period of 12 h. The LGR design reduced heating by a factor of ∼3, which allowed 100 kHz decoupling to be applied to salty samples with generally ≤10 °C sample heating. In addition to expanding the potential for in vivo research, the ability to apply uncompromised high-power decoupling could be beneficial for multiphase samples containing true crystalline solids that require the strongest possible decoupling fields for optimal detection.

In vivo Nuclear magnetic resonance (NMR) is rapidly evolving as a critical tool as it offers real-time metabolic information, which is crucial for delineating complex toxic response pathways in living systems. Organisms such as D. magna (water fleas) and H.azteca (freshwater shrimps) are commonly 13C enriched to increase signal in NMR experiments. A key goal of in vivo NMR is to monitor how molecules (nutrients, contaminants, or drugs) are metabolized. Conventionally, these studies would normally involve using a 13C enriched probe molecule and feeding this to an organism at natural abundance, in turn allowing the fate of the probe molecule to be selectively analyzed. The setback of such an approach is that there is a limited range of 13C enriched probe molecules, and if available, are extremely cost prohibitive. Uniquely, when utilizing 13C organisms a reverse strategy of isotopic filtering becomes possible. The concept described here uses 1H detection in combination with a 13C filter on living organisms....

The superior mass sensitivity of microcoil technology in nuclear magnetic resonance (NMR) spectroscopy provides potential for the analysis of extremely small-mass-limited samples such as eggs, cells, and tiny organisms. For optimal performance and efficiency, the size of the microcoil should be tailored to the size of the mass-limited sample of interest, which can be costly as mass-limited samples come in many shapes and sizes. Therefore, rapid and economic microcoil production methods are needed. One method with great potential is 5-axis computer numerical control (CNC) micromilling, commonly used in the jewelry industry. Most CNC milling machines are designed to process larger objects and commonly have a precision of >25 μm (making the machining of common spiral microcoils, for example, impossible). Here, a 5-axis MiRA6 CNC milling machine, specifically designed for the jewelry industry, with a 0.3 μm precision was used to produce working planar microcoils, microstrips, and novel microsensor designs, with some tested on the NMR in less than 24 h after the start of the design process. Sample wells could be built into the microsensor and could be machined at the same time as the sensors themselves, in some cases leaving a sheet of Teflon as thin as 10 μm between the sample and the sensor. This provides the freedom to produce a wide array of designs and demonstrates 5-axis CNC micromilling as a versatile tool for the rapid prototyping of NMR microsensors. This approach allowed the experimental optimization of a prototype microstrip for the analysis of two intact adult Daphnia magna organisms. In addition, a 3D volume slotted-tube resonator was produced that allowed for 2D 1H–13C NMR of D. magna neonates and exhibited 1H sensitivity (nLODω600 = 1.49 nmol s1/2) close to that of double strip lines, which themselves offer the best compromise between concentration and mass sensitivity published to date.

Nuclear Magnetic Resonance (NMR) spectroscopy is a non-invasive analytical technique which allows for the study of intact samples. Comprehensive Multiphase NMR (CMP-NMR) combines techniques and hardware from solution state and solid state NMR to allow for the holistic analysis of all phases (i.e. solutions, gels and solids) in unaltered samples. This study is the first to apply CMP-NMR to deceased, intact organisms and uses 13C enriched Daphnia magna (water fleas) as an example. D. magna are commonly used model organisms for environmental toxicology studies. As primary consumers, they are responsible for the transfer of nutrients across trophic levels, and a decline in their population can potentially impact the entire freshwater aquatic ecosystem. Though in vivo research is the ultimate tool to understand an organism’s most biologically relevant state, studies are limited by conditions (i.e. oxygen requirements, limited experiment time and reduced spinning speed) required to keep the organisms alive, which can negatively impact the quality of the data collected. In comparison, ex vivo CMP-NMR is beneficial in that; organisms do not need oxygen (eliminating air holes in rotor caps and subsequent evaporation); samples can be spun faster, leading to improved spectral resolution; more biomass per sample can be analyzed; and experiments can be run for longer. In turn, higher quality ex vivo NMR, can provide more comprehensive NMR assignments, which in many cases could be transferred to better understand less resolved in vivo signals. This manuscript is divided into three sections: 1) multiphase spectral editing techniques, 2) detailed metabolic assignments of 2D NMR of 13C enriched D. magna and 3) multiphase biological changes over different life stages, ages and generations of D. magna. In summary, ex vivo CMP-NMR proves to be a very powerful approach to study whole organisms in a comprehensive manner and should provide very complementary information to in vivo based research., Graphical abstract Image 1, Highlights • Comprehensive Multiphase NMR detects all phases (solid/liquid/gel) in whole samples. • Deceased organisms are not subjected to the limitations of in vivo NMR studies. • 2D ex vivo NMR offer increased spectral resolution, improving metabolite assignment. • Holistic analysis shows biological changes in D. magna over different life stages. • Ex vivo NMR can be a complementary tool for in vivo NMR metabolomic studies.

Many natural and environmental samples contain combinations of liquids, gels, and solids, yet quantification in the intact state and across multiple phases is highly challenging. Comprehensive multiphase nuclear magnetic resonance (CMP-NMR) combines all the capabilities of high-resolution magic angle spinning (HR-MAS), with the addition of full solids power handling, permitting all phases (i.e., mixtures of liquids, gels, and solids) to be studied and differentiated in intact samples without pre-treatment or extraction. Here, quantification in CMP-NMR is considered. As 1H NMR is considerably broadened in the solid-state, quantification is easier to achieve through 13C which can be observed easily in all the phases. Accurate 13C quantification requires effective 1H decoupling for all the phases, but each phase requires different decoupling conditions. To satisfy these conditions, a pulse sequence termed stepped decoupling is introduced. This sequence can be used to study all components under ideal decoupling conditions resulting in high-resolution spectra without truncation artifacts and provides accurate integrals of components in all phases. The approach is demonstrated on standards and then applied to natural samples including broccoli, soil, and Arabidopsis. The approach permits accurate quantification of chemical categories (for example total carbohydrates) as well as individual species (for example glucose). Further, as the samples are studied intact, volatile species such as methanol and ethylene which are normally hard to detect in plants can be easily quantified in Arabidopsis.

In vivo nuclear magnetic resonance (NMR) is rapidly evolving as a critical tool as it offers real-time metabolic information, which is crucial for delineating complex toxic response pathways in living systems. Organisms such as

In vivo NMR of small 13C-enriched aquatic organisms is developing as a powerful tool to detect and explain toxic stress at the biochemical level. Amino acids are a very important category of metabolites for stress detection as they are involved in the vast majority of stress response pathways. As such, they are a useful proxy for stress detection in general, which could then be a trigger for more in-depth analysis of the metabolome. 1H-13C heteronuclear single quantum coherence (HSQC) is commonly used to provide additional spectral dispersion in vivo and permit metabolite assignment. While some amino acids can be assigned from HSQC, spectral overlap makes monitoring them in vivo challenging. Here, an experiment typically used to study protein structures is adapted for the selective detection of amino acids inside living Daphnia magna (water fleas). All 20 common amino acids can be selectively detected in both extracts and in vivo. By monitoring bisphenol-A exposure, the in vivo amino acid-only approach identified larger fluxes in a greater number of amino acids when compared to published works using extracts from whole organism homogenates. This suggests that amino acid-only NMR of living organisms may be a very sensitive tool in the detection of stress in vivo and is highly complementary to more traditional metabolomics-based methods. The ability of selective NMR experiments to help researchers to "look inside" living organisms and only detect specific molecules of interest is quite profound and paves the way for the future development of additional targeted experiments for in vivo research and monitoring.