Search

Subacute Sclerosing Panencephalitis (SSPE) is a rare, slowly progressive disorder that affects the entire nervous system. It primarily involves the cerebral cortex, subcortex and optic nerves. Caused by a mutated strain of the measles virus, the disease is mostly irreversible and devastating. It presents with gradually progressive cognitive impairment, extrapyramidal symptoms and sometimes seizures. Although commonly seen in unvaccinated children, SSPE of adult onset is uncommon. The disease is fatal and currently has no treatment. There have been many different presentations of this disorder, ranging from optic nerve involvement to gradual cognitive decline, but none have a good prognosis; ultimately, patients may become akinetic and mute. Here, the authors present an uncommon case of SSPE occurring at an older age (26-year-old male), with a rapid and atypical presentation resembling severe post-viral syndrome, which was later diagnosed as SSPE.

Abstract The pursuit of advanced brain‐inspired electronic devices and memory technologies has led to explore novel materials by processing multimodal and multilevel tailored conductive properties as the next generation of semiconductor platforms, due to von Neumann architecture limits. Among such materials, antimony sulfide (Sb2S3) thin films exhibit outstanding optical and electronic properties, and therefore, they are ideal for applications such as thin‐film solar cells and nonvolatile memory systems. This study investigates the conduction modulation and memory functionalities of Sb2S3 thin films deposited via the vapor transport deposition technique. Experimental results indicate that the Ag/Sb2S3/Pt device possesses properties suitable for memory applications, including low operational voltages, robust endurance, and reliable switching behavior. Further, the reproducibility and stability of these properties across different device batches validate the reliability of these devices for practical implementation. Moreover, Sb2S3‐based memristors exhibit artificial neuroplasticity with prolonged stability, promising considerable advancements in neuromorphic computing. Leveraging the photosensitivity of Sb2S3 enables the Ag/Sb2S3/Pt device to exhibit significant low operating potential and conductivity modulation under optical stimulation for memory applications. This research highlights the potential applications of Sb2S3 in future memory devices and optoelectronics and in shaping electronics with versatility.

Objective. To describe clinical characteristics, genetic details and management of patients of congenital myasthenic syndrome. Methods. A retrospective study was carried out from 2020 to 2023. Patient who presented with ptosis, ophthalmoplegia, proximal limb weakness with genetically confirmed mutations for CMS were included in the study. Patients who were positive for Acetylcholine receptor antibody (AChRAb) or Muscle specific kinase (MuSK) antibody or any other antibodies suggestive of acquired myasthenia were excluded from the study. Outcome. 6 genetically proven patients were identified out of which 4 patients had CHRNE mutation, 1 patient had CHRNA1 mutation and 1 patient had Dok7 mutation. Mean delay in diagnosis was 15 years. Patient with Dok 7 mutation responded to salbutamol, 1 patient of CHRNE mutation required combination of pyridostigmine, fluoxetine and salbutamol, rest all patient responded to pyridostigmine. It took 4 weeks for improvement after starting salbutamol in patient with Dok7 mutation. Conclusion. Although rare, CMS is potentially treatable group of disease. Patient presenting with early onset muscular weakness should be evaluated thoroughly and CMS should be considered in presence of eyelid ptosis, ophthalmoplegia and proximal weakness with diurnal fluctuations. RNS and genetic testing are paramount in achieving an early diagnosis.

Crystal orientation plays a crucial role in the performance of Sb2S3 thin-film solar cells (TFSCs). Among various deposition techniques, vapor transport deposition (VTD) stands out as a viable technique for producing scalable and uniformly deposited thin films, particularly in the solar industry. This study explores temperature-modulated VTD-Sb2S3 deposition to enable efficient carrier transport in photovoltaic cells. In the VTD process, the deposition temperature is altered between 480 °C and 540 °C. XRD, SEM, EDS, and AFM techniques are employed to obtain the characteristics of the Sb2S3 thin films at varying temperatures and evaluate critical features like crystal structure and orientation, surface morphology, composition, and roughness. The prominent crystal orientation changes from the (hk0) to the (hk1) plane after increasing the deposition temperature from 500 to 520 °C. The (211)- and (221)-planes become more prominent when the deposition temperature exceeds 520 °C. The device with the architecture SLG/Mo/Sb2S3/CdS/i-ZnO/AZO/Al, a substrate-configured TFSC, yields a maximum power conversion efficiency of 0.22% when the VTD-Sb2S3 absorber film is deposited at 520 °C. This study presents a promising approach to producing thin films with a preference for specific crystal orientations. The primary aim is to enhance the efficiency of solar cells that utilize VTD-Sb2S3 absorbers.

Metformin Hydrochloride (MH), an orally administered antidiabetic drug from the biguanide family, encounters issues of wide particle size distribution, inefficient dissolution rates and short half-life leading to excess dosage which can result in lactic acidosis. Novel approaches that yield smaller particle size and uniform distribution at higher yields are significant to tackle problems associated with solubility and optimum dosage levels of the administered drugs. In the current research related to microsphere synthesis, a controlled process based on pressure and ultrasonic nozzles for the atomization of liquid, was applied with an objective of optimizing particle size of microspheres of MH in sodium alginate, a biopolymer excipient matrix. The study carried out in spray dryer elucidated parameter optimization using one variable at a time approach by varying important parameters as inlet temperature of air (120°C–150 °C), rate of flow of feed (1.5 mL/min-3 mL/min), aspirator rate (800 rpm–1400 rpm) and polymer content in feed solution (1 g–8 g) using ultrasonic and pressure nozzles for comparison with the target output parameter as particle size and yield. While the particle size at optimum conditions were

Mapping of a novel 20 L capacity ultrasonic (US) reactor having a total of 44 transducers was done by measuring the local cavitation intensity using a cavitation activity meter at different horizontal planes and subsequent validation based on dye degradation. A fixed frequency of 33 kHz and temperature of 30 °C was used during the mapping performed at two different power levels of 250 W and 400 W. In addition, the mapping of specific plane 2 was also performed with transducers operating on walls 1 and 3, while switching the transducers on walls 2 and 4 off and vice versa so as to establish the role of using multiple transducers. Degradation of RO4 dye was also measured at the plane 2 at various powers as 250 W, 400 W, and 1000 W. The degradation of the RO4 dye directly correlated to the cavitation intensity measured at the various location inside the US reactor. The average cavitation intensity was 265.38, 317.25, 185, and 300.5 Cavins for power dissipations of 250 W, 400 W, 250 W (wall 1 and 3 transducers in operation), and 400 W (wall 2 and 4 transducers in operation), respectively. Correspondingly, the average degradation was 10.35 %, 13.03 %, 5.52 %, and 8.9 % for same sequence of operational power and transducers. The investigation amply illustrated dependency of the cavitational activity on the location, power dissipation, and operating mode elucidating important design related information useful for scale up of sonochemical reactors.

The current work investigates the efficacy of acoustic cavitation (AC) based pretreatment as a process intensification method for improving the conventional biological oxidation (BO) treatment of the effluent from common effluent treatment plant (CETP) mainly containing pharmaceutical compounds. The effluent acclimatized with cow dung-based sludge was utilized for the aerobic oxidation with an optimum condition of 1:3 ratio of sludge to effluent and 6 h as duration. COD reduction of 19.58% was achieved with the conventional biological oxidation, which was demonstrated to be improved by incorporating acoustic cavitation-based pretreatment approaches under optimized conditions of 125 W and 70% duty cycle for only AC as well as oxidant loadings as 1000 mg/L for H2O2, 250 mg/L Fe(II) with 1000 mg/L H2O2 for Fenton, 1000 mg/L for KPS and 0.5 L/min for the O3 during the combination approaches. The improved COD reduction after the use of pretreatment approaches followed by the BO of 6 h duration was 29.26%, 72.42%, 85.47%, 45.68% and 69.26% for the AC, AC + H2O2, AC + Fenton, AC + KPS and AC + O3 based approaches respectively. The toxicity assay of the effluent before and after every pretreatment approach using bacterial strains of Staphylococcus aureus and Pseudomonas aeruginosa ensured the biodegradability of the treated effluent as no toxic intermediates could be seen. Overall, the present work elucidated the effectiveness of acoustic cavitation-based pretreatment approaches for the improvement of conventional BO of CETP effluent.

Treatment of real textile industry effluent using photocatalysis, sonocatalysis, sonophotocatalysis and H2O2 assisted sonophotocatalysis have been studied based on the use of Ce-TiO2 nanocatalyst synthesized using sonochemical co-precipitation method. Characterization studies of the obtained catalyst revealed crystallite size as 1.44 nm with particles having spherical morphology. A shift of the absorption edge to the visible light range was also observed in UV–Vis diffuse reflectance spectra (UV-DRS) analysis. The effects of different operational parameters viz catalyst dose (0.5 g/L-2 g/L), temperature (30 °C-55 °C) and pH (3–12) on the COD reduction were studied. The reduction in the COD was higher at lower pH and the optimum temperature established was 45 °C. It was also elucidated that the required catalyst dose was lesser in combined sonophotocatalysis when compared with individual photocatalysis and sonocatalysis. Combination of processes and addition of oxidants increased the COD reduction with the sonophotocatalytic oxidation combined with H2O2 treatment showing the best results for COD reduction (84.75%). The highest reduction in COD for photocatalysis was only 45.09% and for sonocatalysis, it was marginally higher at 58.62%. The highest reduction in COD achieved by sonophotocatalysis was 64.41%. Toxicity tests coupled with Liquid Chromatography Mass Spectrometry (LC-MS) analysis revealed that there were no additional toxic intermediates added to the system during the treatment. Kinetic study allowed establishing that generalized kinetic model fits the experimental results well. Overall, the combined advanced oxidation processes showed better results than the individual processes with higher COD reduction and lower requirement of the catalyst.

The effect of different metal supported TiO2 catalysts on the photocatalytic degradation of p-Nitrophenol (PNP) was investigated experimentally and supported by Density Functional Theory (DFT) approach. Process optimization studies were carried out using the best performing catalyst and the effect of different electron acceptors was also investigated. Degradation was strongly influenced by operating parameters and oxidants with efficacy as H2O2 > K2S2O8 > air. DFT simulations confirmed higher electrostatic potential in presence of hydroxyl radicals explaining the higher degradation. Overall, this work clearly establishes the effectiveness of electron acceptors in maximizing PNP degradation and explains the interaction of organic pollutants with different radicals.

The present work explored the effect of using ultrasound during synthesis of oleogels on stability, strength and oxidative stability of oleogel and its comparison with conventional stirring process to highlight the importance of using ultrasound. Further, this MCT-based oleogel was used in formulation of cookies and its effect on texture and sensory attributes was examined. Ethyl cellulose (EC) concentration of 1.5% at ≤10 °C during synthesis resulted in gelation of MCT liquid oil. Ultrasound duty cycle of 10% and 20 kHz frequency improved the elastic modulus (G’) of oleogel and reduced the oil loss when maintained for storage period of 30 days and also the U-MCTO showed excellent hardness and stickiness for 30 days as compared with the oleogel prepared using conventional stirring. The U-MCTO, C-MCTO and MCT liquid oil showed induction time of 9.76, 6.41, 5.98 h at 110 °C, thus showing higher oxidative stability for the U-MCTO at accelerated conditions. The U-MCTO cookies showed excellent texture with force (N) of 4.17 ± 0.01 and 4.73 ± 0.00 N on 0 and 30 days, respectively, whereas it was much higher for MCTLO cookies i.e., 5.2 ± 0.0 and 7.89 ± 0.00 N on 0 and 30 days, respectively, making it unsuitable for consumption. The sensory score and overall acceptability of U-MCTO cookies was higher in terms of texture, mouthfeel, crunchiness, and hardness making it an excellent replacement for the use of saturated fat in bakery application like cookies.

The current study focuses on comparing the physico-chemical changes during frying of palm oil designer lipid (PODL) and two different blends of palm oil with medium chain triglycerides (MCT) over 48 frying cycles. The PV of PODL, F1 (blend of palm oil with MCT in 50:50 proportion) and F2 (blend of palm oil with MCT in 70:30 proportion) increased from 1.29 ± 0.02, 1.34 ± 0.00, 1.38 ± 0.01 to 1.36 ± 0.02, 1.83 ± 0.02, 1.94 ± 0.02 meq O2 / kg respectively after 48 frying cycles. Similarly, p-AV and Totox values were 39.5 ± 0.01 and 42.22 ± 0.01, 52.8 ± 0.02 and 56.46 ± 0.03, 61.7 ± 0.01 and 65.58 ± 0.02 for PODL, F1 and F2 respectively after 48 frying cycles confirming that PODL showed higher thermo-oxidative stability in comparison with palm oil blends. The viscosity of all the frying medium increased and also there was a change in color of frying oil upon successive frying indicating accumulation of oxidative byproducts in the frying oil. Heat transfer coefficient was also elucidated to decrease with an increase in the frying cycle for all the blends and PODL. Overall, it was clearly demonstrated that the physicochemical properties and heat transfer quality of PODL was less affected as compared with palm oil blends demonstrating excellent potential of the PODL/interesterified fat as an alternative frying medium.

The primary motive of the current work is to achieve smaller mean particle size with narrow size distribution that can enhance the bioavailability of azithromycin (ARZ), an essential requirement due to its poor water solubility. Recrystallization of ARZ was evaluated using cooling as well as antisolvent crystallization approaches in the presence of ultrasonic irradiation with detailed study into effect of different parameters such as ultrasonic power, time and temperature. Ultrasound assisted antisolvent crystallization at low temperatures (

Ultrasound-assisted approach has been investigated for delignification so as to develop green and sustainable technology. Combination of NaOH with ultrasound has been applied with detailed study into effect of various parameters such as time (operating range of 15–90 min), alkali concentration (0.25 M−2.5 M), solvent loading (1:15–1:30 w/v), temperature (50–90 ˚C), power (40–140 W) and duty cycle (40–70 %) at fixed frequency of 20 kHz. The optimized operating conditions established for the ultrasonic horn were 1 M as the NaOH concentration, 1 h as treatment time, 70˚C as the operating temperature, 1:20 as the biomass loading ratio, 100 W as the ultrasonic power and 70% duty cycle yielding 67.30% as the delignification extent. Comparative study performed using conventional and ultrasonic bath assisted alkaline treatment revealed lower delignification as 48.09% and 61.55% respectively. The biomass samples were characterized by SEM, XRD, FTIR and BET techniques to establish the role of ultrasound during the treatment. The morphological changes based on the ultrasound treatment demonstrated by SEM were favorable for enhanced delignification and also the crystallinity index was more in the case of ultrasound treated material than that obtained by conventional method. Specific surface area and pore size determinations based on BET analysis also confirmed beneficial role of ultrasound. The overall results clearly demonstrated the intensification obtained due to the use of ultrasonic reactors.

The present work demonstrates the significant role of ultrasound (US) in intensifying the efficacy of the combination with Fenton reagent and/or ozone for the treatment of real dye industry industrial effluent procured from the local industry. Initial part of the work focused on analysing the literature based on combination approaches of US with different oxidants applied for the treatment of real and simulated effluents focusing on the dyes. The work also provides guidelines for the selection of optimal operating parameters for maximizing the intensification of the degradation. The second part of the work presents an experimental study into combined approaches of ultrasound with ozone (O3) and Fenton’s reagent for treatment of real effluent. Under optimized conditions (100 W, 20 kHz and duty cycle of 70%), maximum COD reductions of 94.79% and 51% were observed using a combined approach of US + Fenton oxidation followed by lime treatment for the treatment of effluent-I and effluent-II respectively at H2O2 loading of 17.5 g/L, H2O2/Fe2+ ratio of 3, pH of 4, CaO dose of 1 g/L and an overall treatment time of 70 min. US + Fenton + O3 followed by lime was also applied for treatment under ozone loading of 1 g/h for the treatment of effluent-I and it was found that maximum COD reduction of 95.12% was obtained within 30 min of treatment time, indicating use of ozone did not result in significant value addition in terms of COD reduction but resulted in faster treatment. HC (inlet pressure: 4 bar) + Fenton + Lime scheme was successfully replicated on a pilot-scale resulting in maximum COD reduction of 57.65% within 70 min of treatment time. Overall, it has been concluded that the hybrid oxidative processes as US + Fenton followed by lime treatment is established as the best approach ensuring effective COD reduction at the same time obtaining final colourless/reusable effluent.

TiO2 catalyst was synthesized in the presence of ultrasound (ultrasonic horn at 20 kHz frequency and 70% duty cycle) at different power (80 W to 120 W) and durations as well as surfactant concentration with an objective of establishing best conditions for achieving lowest particle size of the photocatalyst. Detailed characterization in terms of crystal phase, crystallinity, functional groups and morphology of the photocatalyst has been performed using SEM, XRD and FTIR analysis. It was demonstrated that sonication significantly reduced the particle size with high degree of sphericity and homogeneity as compared to conventionally synthesized TiO2 with similar crystallinity in both cases. The catalytic performance was subsequently evaluated for the deep desulfurization of thiophene. Different desulfurization approaches including individual US (ultrasonic horn at 20 kHz frequency, 110 W power and 70% duty cycle) and UV irradiations, US/UV, US/UV/H2O2, US/UV/TiO2 and US/UV/H2O2/TiO2 were applied to evaluate the catalytic activity. The best approach was demonstrated as US/UV/H2O2/TiO2 and also activity of catalyst synthesized using ultrasound was much better compared to conventionally synthesized catalyst. The studies related to different model solvents demonstrated lowest reactivity for toluene whereas n-hexane and n-octane resulted in complete desulfurization in 60 min and 50 min treatment respectively. The desulfurization followed pseudo first order reaction kinetics irrespective of the solvent used. Overall the work clearly demonstrated the efficacy of ultrasound in improving the catalyst synthesis as well as desulfurization of thiophene.

The modification of natural clinoptilolite with silver ions using ultrasound has been investigated in the current work. The modification process was performed using clinoptilolite of different fractions (0–3.0 mm) over the temperature range of 25–55 °C, ultrasonic power range of 8.0–12.5 W and AgNO3 concentration range of 0.01–0.1 M. The zeolite modification was performed in the presence of sonication and mechanical stirring in separate runs for comparison. Fundamental analysis demonstrated that the use of ultrasound ensures desorption of air from clinoptilolite particles and accelerates the diffusion of Ag+ ions and subsequent ion exchange. Increasing the particle size of clinoptilolite led to a natural decrease in its sorption capacity. A slight increase in the sorption capacity with an increase in the equivalent particle diameter from 0.081 to 0.35 mm was seen due to changes in the structure of clinoptilolite particles during mechanical grinding. The calculated temperature coefficient of the sorption process of Ag+ ions as

The present study deals with intensified synthesis of designer lipids with application of ultrasound based on biocatalyzed reaction between long chain triglyceride and medium chain fatty acid. The effects of various reaction conditions like molar ratio of reactant, reaction temperature, and enzyme loading along with the effect of ultrasound parameters such as duty cycle and irradiation time on the rate of formation of designer lipids has been investigated. The ultrasound assisted process was also compared with the traditional process so as to clearly bring out the intensification effects. During the study, it was clearly demonstrated that the optimum reaction conditions for maximum yield of designer lipids as 92% was molar ratio of medium chain fatty acid to long chain triglyceride as 4:1, reaction temperature of 40 °C, enzyme loading of 3%, duty cycle of 70%, 240 W as power dissipation and 360 min as reaction time. The recyclability study of enzyme showed its effectiveness up to 10 cycles. The synthesized designer lipid showed higher oxidative stability for 35 days and also showed Newtonian behaviour with eye appealing colour. The current study demonstrates development of an eco-friendly technique for intensified synthesis of designer lipids having numerous nutraceutical benefits.

The degradation of benzene present in wastewater using hydrodynamic cavitation (HC) alone as well as in combination with air has been studied using nozzles as cavitating device of HC reactor. Initially, the energy efficiency of the HC reactor operated at different inlet pressures was determined using the calorimetric studies. Maximum energy efficiency of 53.4% was obtained at an inlet pressure of 3.9 bar. The treatment processes were compared under adiabatic as well as isothermal conditions and it was observed that under the adiabatic condition, the extent of degradation is higher as compared to isothermal condition. Studies related to the understanding the effect of inlet pressure (range of 1.8–3.9 bar) revealed that the maximum degradation as 98.9% was obtained at 2.4 bar pressure using the individual operation of HC under adiabatic conditions and in 70 min of treatment. The combination of HC with air was investigated at different air flow rates with best results for maximum degradation of benzene achieved at air flow rate of 60 mL/sec. A novel approach of using cavitation for a limited fraction of total treatment time was also demonstrated to be beneficial in terms of the extent of degradation as well as energy requirements and cost of operation. Based on the cavitational intensity, the resonant radius of aggregates of cavitation bubbles was also determined for distilled water as well as for aqueous solution of benzene. Overall, significant benefits of using HC combined with air have been demonstrated for degradation of benzene along with fundamental understanding into cavitation effects.

The present study aims to evaluate the suitability of structured triacylglycerol (ST) consisting of medium chain triacylglycerol (MCT) as low calorie and instant energy source in combination with essential fatty acids for formulations in different food products to add value to existing products. The study investigates the effect of presence of ST on the physicochemical and sensory properties of various food products such as mayonnaise enriched with ST synthesized from medium chain fatty acid (MCFA) and rice bran oil, cookies enriched with ST synthesized from MCFA and oleic acid rich moringa oil, energy bar with ST synthesized from MCFA and omega 3 enriched fish oil, as well as yogurt drink with ST synthesized from MCFA and omega 6 enriched flaxseed oil. The obtained results established the suitability of incorporation of ST in food products and comparison with standard market products revealed the validity of the products to sustain the demand with value addition. The oxidative stability studies of all the products in the presence of natural antioxidants from moringa leaves and pomegranate peel using the peroxide value test and rancimat analysis demonstrated similar stability to the standard marketed product. Application of plant wastes and residues in the form of leaves or peels as the likely sources for isolating bioactive compounds demonstrates potential of the sustainable approach also giving benefit of increasing the stability of the product. The study also points towards possible replacement option for synthetic carcinogenic antioxidants with natural antioxidants obtained from moringa leaves and pomegranate peel. The present work clearly demonstrates the effective use of structured triacylglycerols synthesized using green methodologies for creating unique health enriched food products with all worthy and green components.

AIMS:The mechanisms by which a 'Mediterranean diet' reduces cardiovascular disease (CVD) burden remain poorly understood. Lycopene is a potent antioxidant found in such diets with evidence suggesting beneficial effects. We wished to investigate the effects of lycopene on the vasculature in CVD patients and separately, in healthy volunteers (HV). METHODS AND RESULTS:We randomised 36 statin treated CVD patients and 36 healthy volunteers in a 2∶1 treatment allocation ratio to either 7 mg lycopene or placebo daily for 2 months in a double-blind trial. Forearm responses to intra-arterial infusions of acetylcholine (endothelium-dependent vasodilatation; EDV), sodium nitroprusside (endothelium-independent vasodilatation; EIDV), and NG-monomethyl-L-arginine (basal nitric oxide (NO) synthase activity) were measured using venous plethysmography. A range of vascular and biochemical secondary endpoints were also explored. EDV in CVD patients post-lycopene improved by 53% (95% CI: +9% to +93%, P = 0.03 vs. placebo) without changes to EIDV, or basal NO responses. HVs did not show changes in EDV after lycopene treatment. Blood pressure, arterial stiffness, lipids and hsCRP levels were unchanged for lycopene vs. placebo treatment groups in the CVD arm as well as the HV arm. At baseline, CVD patients had impaired EDV compared with HV (30% lower; 95% CI: -45% to -10%, P = 0.008), despite lower LDL cholesterol (1.2 mmol/L lower, 95% CI: -1.6 to -0.9 mmol/L, P

Orbital aspergillosis is an uncommon but potentially fatal disease. Its initial clinical presentation can be nonspecific and may be easily confused with other systemic diseases (such as neoplasms, other orbital infections which could include bacterial, mycobacterium and fungal infections), systemic vasculitis and other inflammatory conditions. Use of systemic corticosteroid may result in transient symptom relief further delaying the diagnosis. We describe its occurrence in a 76-year-old Chinese female with underlying rheumatoid arthritis who presented with a four-week history of left fronto-temporal headache, and ipsilateral blurring of vision with an elevated erythrocyte sedimentation rate (ESR). Although temporal artery biopsy was negative for giant cell arteritis (GCA), high-dose corticosteroids were initially started for presumptive GCA. There was an initial transient improvement in headache and in her left eye's visual acuity. However, this was followed by a worsening headache and complete visual loss in her left eye. Magnetic resonance imaging (MRI) revealed a new orbital apical mass-like lesion extending from the sphenoid sinus which was diagnosed as aspergillus infection on biopsy. Her condition improved and remained stable after the institution of appropriate anti-fungal therapy.

Photosystem I is the light-driven plastocyanin-ferredoxin oxidoreductase in the photosynthetic electron transfer of cyanobacteria and plants. Two histidyl residues in the symmetric transmembrane helices A-j and B-j provide ligands for the P700 chlorophyll molecules of the reaction center of photosystem I. To determine the role of conserved aromatic residues adjacent to the histidyl molecule in the helix of B-j, we generated six site-directed mutants of the psaB gene in Synechocystis sp. PCC 6803. Three mutant strains with W645C, W643C/A644I and S641C/V642I substitutions could grow photoautotrophically and showed no obvious reduction in the photosystem I activity. Kinetics of P700 re-reduction by plastocyanin remained unaltered in these mutants. In contrast, the strains with H651C/L652M, F649C/G650I and F647C substitutions could not grow under photoautotrophic conditions because those mutants had low photosystem I activity, possibly due to low levels of proteins. A procedure to select spontaneous revertants from the mutants that are incapable to photoautotrophic growth resulted in three revertants that were used in this study. The molecular analysis of the spontaneous revertants suggested that an aromatic residue at F647 and a small residue at G650 may be necessary for maintaining the structural integrity of photosystem I. The (P700⁺-P700) steady-state absorption difference spectrum of the revertant F647Y has a ∼5 nm narrower peak than the recovered wild-type, suggesting that additional hydroxyl group of this revertant may participate in the interaction with the special pair while the photosystem I complexes of the F649C/G650T and H651Q mutants closely resemble the wild-type spectrum. The results presented here demonstrate that the highly conserved residues W645, W643 and F649 are not critical for maintaining the integrity and in mediating electron transport from plastocyanin to photosystem I. Our data suggest that an aromatic residue is required at position of 647 for structural integrity and/or function of photosystem I.