Search

The widespread use of polyvinyl chloride (PVC) and its entry into humans and livestock is of serious concern. In our study, we investigated the impact of PVC treatments on physiological, pathological, hormonal, and microbiota changes in female rabbits. Trend-like alterations in weight were observed in the spleen, liver, and kidney in both low (P1) and high dose (P2) PVC treatment groups. Histopathological examination revealed exfoliation of the intestinal mucosa in the treated groups compared to the control, and microplastic particles were penetrated and embedded in the spleen. Furthermore, both P1 and P2 showed increased 17-beta-estradiol (E2) hormone levels, indicating early sexual maturation. Moreover, the elevated tumor necrosis factor alpha (TNF-α) levels suggest inflammatory reactions associated with PVC treatment. Genus-level analyses of the gut microbiota in group P2 showed several genera with increased or decreased abundance. In conclusion, significant or trend-like correlations were demonstrated between the PVC content of feed and physiological, pathological, and microbiota parameters. To our knowledge, this is the first study to investigate the broad-spectrum effects of PVC microplastic exposure in rabbits. These results highlight the potential health risks associated with PVC microplastic exposure, warranting further investigations in both animals and humans.

Lactic acid bacteria (LAB) in the microbiota play an important role in human and animal health and, when used as probiotics, can contribute to an increased growth performance in livestock management. Animals living in their native habitat can serve as natural sources of microorganisms, so isolation of LAB strains from wild boars could provide the opportunity to develop effective probiotics to improve production in swine industry. In this study, the probiotic potential of 56 LAB isolates, originated from the ileum, colon, caecum and faeces of 5 wild boars, were assessed in vitro in details. Their taxonomic identity at species level and their antibacterial activity against four representative strains of potentially pathogenic bacteria were determined. The ability to tolerate low pH and bile salt, antibiotic susceptibility, bile salt hydrolase activity and lack of hemolysis were tested. Draft genome sequences of ten Limosilactobacillus mucosae and three Leuconostoc suionicum strains were determined. Bioinformatic analysis excluded the presence of any known acquired antibiotic resistance genes. Three genes, encoding mesentericin B105 and two different bacteriocin-IIc class proteins, as well as two genes with possible involvement in mesentericin secretion (mesE) and transport (mesD) were identified in two L. suionicum strains. Lam29 protein, a component of an ABC transporter with proved function as mucin- and epithelial cell-adhesion factor, and a bile salt hydrolase gene were found in all ten L. mucosae genomes. Comprehensive reconsideration of all data helps to select candidate strains to assess their probiotic potential further in animal experiments., (© 2023. The Author(s).)

The aim of this study was metagenomics analyses of acquired antibiotic-resistance genes (ARGs) in the intestinal microbiome of two important food-animal species in Hungary from a One Health perspective. Intestinal content samples were collected from 12 domestic pigs ( Sus scrofa ) and from a common carp ( Cyprinus carpio ). Shotgun metagenomic sequencing of DNA purified from the intestinal samples was performed on the Illumina platform. The ResFinder database was applied for detecting acquired ARGs in the assembled metagenomic contigs. Altogether, 59 acquired ARG types were identified, 51 genes from domestic pig and 12 genes from the carp intestinal microbiome. ARG types belonged to the antibiotic classes aminoglycosides (27.1%), tetracyclines (25.4%), β-lactams (16.9%), and others. Of the identified ARGs, tet (E), a bla OXA - 48-like β-lactamase gene, as well as cphA4 , ampS , aadA2 , qnrS2 , and sul1 , were identified only in carp but not in swine samples. Several of the detected acquired ARGs have not yet been described from food animals in Hungary. The tet (Q), tet (W), tet (O), and mef (A) genes detected in the intestinal microbiome of domestic pigs had also been identified from free-living wild boars in Hungary, suggesting a possible relationship between the occurrence of acquired ARGs in domestic and wild animal populations.

Introduction: Land application of manure that contains antibiotics and resistant bacteria may facilitate the establishment of an environmental reservoir of antibiotic-resistant microbes, promoting their dissemination into agricultural and natural habitats. The main objective of this study was to search for acquired antibiotic resistance determinants in the gut microbiota of wild boar populations living in natural habitats., Material and Methods: Gastrointestinal samples of free-living wild boars were collected in the Zemplén Mountains in Hungary and were characterised by culture-based, metagenomic, and molecular microbiological methods. Bioinformatic analysis of the faecal microbiome of a hunted wild boar from Japan was used for comparative studies. Also, shotgun metagenomic sequencing data of two untreated sewage wastewater samples from North Pest (Hungary) from 2016 were analysed by bioinformatic methods. Minimum spanning tree diagrams for seven-gene MLST profiles of 104 E. coli strains isolated in Europe from wild boars and domestic pigs were generated in Enterobase., Results: In the ileum of a diarrhoeic boar, a dominant E. coli O112ab:H2 strain with intermediate resistance to gentamicin, tobramycin, and amikacin was identified, displaying sequence type ST388 and harbouring the EAST1 toxin astA gene. Metagenomic analyses of the colon and rectum digesta revealed the presence of the tetQ , tetW , tetO , and mefA antibiotic resistance genes that were also detected in the gut microbiome of four other wild boars from the mountains. Furthermore, the tetQ and cfxA genes were identified in the faecal microbiome of a hunted wild boar from Japan., Conclusion: The gastrointestinal microbiota of the free-living wild boars examined in this study carried acquired antibiotic resistance determinants that are highly prevalent among domestic livestock populations., Competing Interests: Conflict of Interest Conflict of Interest Statement: The authors declare that there is no conflict of interests regarding the publication of this article., (© 2020 B. Libisch et al. published by Sciendo.)

Here, we report two annotated draft genome sequences of Sphingobacterium sp. strains isolated from honey. The genomes of strains 1.A.4 and 1.A.5 show a limited similarity to each other and to genomes of other Sphingobacterium species, indicating that these isolates may represent new species., (Copyright © 2017 Veress et al.)

The annotated draft genome sequences of two recent Saccharibacter sp. strains isolated from honey and a honey bee stomach in 2014 are reported here. Currently, two Saccharibacter whole-genome sequences are available in databases; thus, the sequences of our new isolates will contribute to a better understanding of Saccharibacter genomes., (Copyright © 2017 Veress et al.)

The genomic island SGI1 and its variants, the important vehicles of multi-resistance in Salmonella strains, are integrative elements mobilized exclusively by the conjugative IncA/C plasmids. Integration and excision of the island are carried out by the SGI1-encoded site-specific recombinase Int and the recombination directionality factor Xis. Chromosomal integration ensures the stable maintenance and vertical transmission of SGI1, while excision is the initial step of horizontal transfer, followed by conjugation and integration into the recipient. We report here that SGI1 not only exploits the conjugal apparatus of the IncA/C plasmids but also utilizes the regulatory mechanisms of the conjugation system for the exact timing and activation of excision to ensure efficient horizontal transfer. This study demonstrates that the FlhDC-family activator AcaCD, which regulates the conjugation machinery of the IncA/C plasmids, serves as a signal of helper entry through binding to SGI1 xis promoter and activating SGI1 excision. Promoters of int and xis genes have been identified and the binding site of the activator has been located by footprinting and deletion analyses. We prove that expression of xis is activator-dependent while int is constitutively expressed, and this regulatory mechanism is presumably responsible for the efficient transfer and stable maintenance of SGI1., (© The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.)

Genes encoding the tail proteins of the temperate phage 16-3 of the symbiotic nitrogen-fixing bacterium Sinorhizobium meliloti 41 have been identified. First, a new host range gene, designated hII, was localized by using missense mutations. The corresponding protein was shown to be identical to the 85-kDa tail protein by determining its N-terminal sequence. Electron microscopic analysis showed that phage 16-3 possesses an icosahedral head and a long, noncontractile tail characteristic of the Siphoviridae. By using a lysogenic S. meliloti 41 strain, mutants with insertions in the putative tail region of the genome were constructed and virion morphology was examined after induction of the lytic cycle. Insertions in ORF017, ORF018a, ORF020, ORF021, the previously described h gene, and hII resulted in uninfectious head particles lacking tail structures, suggesting that the majority of the genes in this region are essential for tail formation. By using different bacterial mutants, it was also shown that not only the RkpM and RkpY proteins but also the RkpZ protein of the host takes part in the formation of the phage receptor. Results for the host range phage mutants and the receptor mutant bacteria suggest that the HII tail protein interacts with the capsular polysaccharide of the host and that the tail protein encoded by the original h gene recognizes a proteinaceous receptor.

The C repressor protein of phage 16-3, which is required for establishing and maintaining lysogeny, recognizes structurally different operators which differ by 2 bp in the length of the spacer between the conserved palindromic sequences. A "rotationally flexible protein homodimers" model has been proposed in order to explain the conformational adaptivity of the 16-3 repressor. In this paper, we report on the isolation of a repressor mutant with altered binding specificity which was used to identify a residue-base pair contact and to monitor the spatial relationship of the recognition helix of C repressor to the contacting major groove of DNA within the two kinds of repressor-operator complexes. Our results indicate spatial differences at the interface which may reflect different docking arrangements in recognition of the structurally different operators by the 16-3 repressor.

Cohesive ends of 16-3, a temperate phage of Rhizobium meliloti 41, have been identified as 10-base-long, 3'-protruding complementary G/C-rich sequences. terS and terL encode the two subunits of 16-3 terminase. Significant homologies were detected among the terminase subunits of phage 16-3 and other phages from various ecosystems.

Many organisms control initiation of DNA replication by limiting supply or activity of initiator proteins. In plasmids, such as P1, initiators are limited primarily by transcription and dimerization. However, the relevance of initiator limitation to plasmid copy number control has appeared doubtful, because initiator oversupply increases the copy number only marginally. Copy number control instead has been attributed to initiator-mediated plasmid pairing ("handcuffing"), because initiator mutations to handcuffing deficiency elevates the copy number significantly. Here, we present genetic evidence of a role for initiator limitation in plasmid copy number control by showing that autorepression-defective initiator mutants also can elevate the plasmid copy number. We further show, by quantitative modeling, that initiator dimerization is a homeostatic mechanism that dampens active monomer increase when the protein is oversupplied. This finding implies that oversupplied initiator proteins are largely dimeric, partly accounting for their limited ability to increase copy number. A combination of autorepression, dimerization, and handcuffing appears to account fully for control of P1 plasmid copy number.

Several temperate bacteriophage utilize chromosomal sequences encoding putative tRNA genes for phage attachment. However, whether these sequences belong to genes which are functional as tRNA is generally not known. In this article, we demonstrate that the attachment site of temperate phage 16-3 (attB) nests within an active proline tRNA gene in Rhizobium meliloti 41. A loss-of-function mutation in this tRNA gene leads to significant delay in switching from lag to exponential growth phase. We converted the putative Rhizobium gene to an active amber suppressor gene which suppressed amber mutant alleles of genes of 16-3 phage and of Escherichia coli origin in R. meliloti 41 and in Agrobacterium tumefaciens GV2260. Upon lysogenization of R. meliloti by phage 16-3, the proline tRNA gene retained its structural and functional integrity. Aspects of the co-evolution of a temperate phage and its bacterium host is discussed. The side product of this work, i.e. construction of amber suppressor tRNA genes in Rhizobium and Agrobacterium, for the first time widens the options of genetic study.

The integrative system of phage 16-3 of Rhizobium meliloti 41 was shown to function in several bacterial species belonging to the Rhizobium, Bradyrhizobium, Azorhizobium, and Agrobacterium genera. It might also function in many other bacterial species provided that both the target site (attB) and the required host factor(s) are present. Here we report on the construction of a new integrative vector that can be utilized in gene regulation studies. It provides an opportunity to create a single-copy set-up for characterizing DNA-protein interactions in vivo, in a wide range of bacteria. To demonstrate the usefulness of the vector, transcription repression by binding of the C repressor protein of phage 16-3 to wild type operators was studied. The assay system provided highly reproducible quantitative data on repression.

16-3 is a temperate phage of the symbiotic nitrogen-fixing bacterium Rhizobium meliloti 41. Its prophage state and immunity against superinfection by homoimmune phages are governed by a complex set of controls: the immC and immX repressor systems and the avirT element are all located in well-separated, distinct regions which span 25 kb on the bacteriophage chromosome. The anatomy and function of the immC region are well documented; however, fewer analyses have addressed the immX and avirT regions. We focused in this paper on the immX region and dissected it into two major parts: X(U/L) and X(V). The X(U/L) part (0.6 kb) contained two overlapping cistrons, X(U) and X(L), coding for proteins pXU and pXL, respectively. Inactivation of either gene inactivated the repressor function of the immX region. Loss-of-function mutants of X(U) and X(L) complemented each other in trans in double lysogens. The X(V) part (1 kb) contained a target for X(U/L) repressor action. Mutations at three sites in X(V) led to various degree of ImmX insensitivity in a hierarchic manner. Two sites (X(V1) and X(V3)) exhibited the inverted-repeat structures characteristic of many repressor binding sites. However, X(V1) could also be folded into a transcription terminator. Of the two immunity regions of 16-3, immX seems to be unique both in its complex genetic anatomy and in its sequence. To date, no DNA or peptide sequence homologous to that of ImmX has been found in the data banks. In contrast, immC shares properties of a number of immunity systems commonly found in temperate phages.

Prokaryotic repressor-operator systems provide exemplars for the sequence-specific interactions between DNA and protein. The crucial atomic contacts of the two macromolecules are attained in a compact, geometrically defined structure of the DNA-protein complex. The pitch of the DNA interface seems an especially sensitive part of this architecture because changes in its length introduce new spacing and rotational relations in one step. We discovered a natural system that may serve as a model for investigating this problem: the repressor of the 16-3 phage of Rhizobium meliloti (helix-turn-helix class protein) possesses inherent ability to accommodate to various DNA twistings. It binds the cognate operators, which are 5'-ACAA-4 bp-TTGT-3' (O(L)) and 5'-ACAA-6 bp-TTGT-3' (O(R)) and thus differ 2 bp in length, and consequently the two half-sites will be rotated with respect to each other by 72 degrees in the idealized B-DNA (64 degrees by dinucleotide steps calculations). Furthermore, a synthetic intermediate (DNA sequence) 5'-ACAA-5 bp-TTGT-3' (O5) also binds specifically the repressor. The natural operators and bound repressors can form higher order DNA-protein complexes and perform efficient repression, whereas the synthetic operator-repressor complex cannot do either. The natural operators are bent when complexed with the repressor, whereas the O5 operator does not show bending in electrophoretic mobility assay. Possible structures of the complexes are discussed.

The integrase protein of the Rhizobium meliloti 41 phage 16-3 has been classified as a member of the Int family of tyrosine recombinases. The site-specific recombination system of the phage belongs to the group in which the target site of integration (attB) is within a tRNA gene. Since tRNA genes are conserved, we expected that the target sequence of the site-specific recombination system of the 16-3 phage could occur in other species and integration could take place if the required putative host factors were also provided by the targeted cells. Here we report that a plasmid (pSEM167) carrying the attP element and the integrase gene (int) of the phage can integrate into the chromosomes of R. meliloti 1021 and eight other species. In all cases integration occurred at so-far-unidentified, putative proline tRNA (CGG) genes, indicating the possibility of their common origin. Multiple alignment of the sequences suggested that the location of the att core was different from that expected previously. The minimal attB was identified as a 23-bp sequence corresponding to the anticodon arm of the tRNA.

The basic replicon of plasmid pCU1 contains three different replication origins. Replication initiated from the oriB origin requires pCU1-encoded protein RepA. Previously, information analysis of 19 natural RepA binding sequences predicted a 20-bp sequence as a RepA binding site. Guanines contacting RepA in the major groove of DNA have also been determined. In this study, we used the missing-nucleoside method to determine all of the bases relevant to RepA binding. The importance of some thymine bases was also confirmed by a missing-thymine site interference assay. Participation of the 5-methyl groups of two thymines (at positions -6 and 7) in RepA binding was pointed out by a missing-thymine methyl site interference assay. Phosphate groups of the DNA backbone which strongly interfered with RepA binding upon ethylation were also identified. The pattern of contacting positions mapped by hydroxyl radical protection footprinting indicates that RepA binds to one face of B-form DNA. The length of the binding site was found to be 20 bp by dissociation rate measurement of complexes formed between RepA and a variety of binding sequences. The symmetry of the binding site and that of the contacting bases, particularly the reacting 5-methyl groups of two thymines, suggest that pCU1-encoded RepA may contact its site as a homodimer.

Phage 16-3 is a temperate phage of Rhizobium meliloti 41 which integrates its genome with high efficiency into the host chromosome by site-specific recombination through DNA sequences of attB and attP. Here we report the identification of two phage-encoded genes required for recombinations at these sites: int (phage integration) and xis (prophage excision). We concluded that Int protein of phage 16-3 belongs to the integrase family of tyrosine recombinases. Despite similarities to the cognate systems of the lambdoid phages, the 16-3 int xis att system is not active in Escherichia coli, probably due to requirements for host factors that differ in Rhizobium meliloti and E. coli. The application of the 16-3 site-specific recombination system in biotechnology is discussed.

A 2kb DNA region of the broad-host-range plasmid pCU1 carries all of the information essential for the stable maintenance of the plasmid and to express the same host-range specificity. It was predicted that the protein required to initiate replication from at least one of the three origins of the plasmid is encoded by the longest open-reading frame (ORF239) of the three overlapping in-frame ORFs located within the 2 kb region. The product of ORF239 has been named RepA. The initiator protein was overexpressed, purified and used for in vitro binding studies. Gel mobility shift experiments were performed to localize RepA binding sites. The DNA sequence protected by the bound RepA molecule(s) was determined by DNase I footprinting and 19 of a 20 bp long sequence that is part of the protected sequence were located in two clusters flanking the repA gene. A plasmid created by linking a 310 bp fragment (nucleotides 238 to 547) of the 2 kb region to the antibiotic resistance genes carried by the omega fragment, can be maintained stably if the RepA protein is supplied in trans. We conclude that this 310 bp DNA fragment, which consists of a short G+C and a long A+T rich region and the cluster of five RepA binding sites, carries a functional origin of the plasmid-protein dependent replication. The position of this origin indicates that it is oriB, one of the three origins previously identified by electron microscopy. The second cluster of RepA binding sites is downstream of the repA gene and consists of 14 sites that are in inverted orientation compared with the binding sites located in the oriB region. They are part of the region that was shown formerly to be involved in controlling the copy number of the plasmid. In contrast to oriB, binding of RepA to neither the oriS nor oriV region was detected.

Initiation of DNA replication and negative control of initiation frequency in many bacterial plasmids are mediated by multiple binding sites (iterons) for the replicon-encoded initiator protein. Here we show that a single iteron of plasmid P1, when cloned in a multicopy vector, pUC19, can control replication of a miniP1 plasmid effectively. Using this assay system, several iterons with single point mutations were analyzed. The degree of control was directly correlated with the binding affinity of the iterons for the initiator protein in vitro. The control was also unaffected whether or not a wild type iteron was flanked with strong transcription terminators. We conclude that initiator binding is the only activity of P1 iteron sequences relevant to replication control.

RepA, the replication initiator protein of plasmid P1, binds to specific 19 bp sequences on the plasmid DNA. Earlier footprinting studies with dimethylsulfate identified the guanines that contact RepA through the major groove of DNA. In this study, base elimination was used to identify the contribution of all four bases to the binding reaction. Depurination and depyrimidation of any base in the neighborhood of the contacting guanines was found to decrease RepA binding. These results are consistent with the notion that RepA contacts bases of two consecutive major grooves on the same face of DNA. We also observed that depurination but not methylation of three guanines (G3, G8 and G9) affected binding. We identified the DNA phosphate groups (3 in the top strand, one of which mapped between G8 and G9, and 4 in the bottom strand, one of which was adjacent to C3) that strongly interfered with RepA binding upon ethylation. These results indicate that certain bases (e.g. G3, G8 and G9) may not contact RepA directly but contribute to base and backbone contacts by maintaining proper structure of the binding site.

The replication initiator protein RepA of plasmid P1 can bind to 14 sites on the plasmid. These sites are variously used to autoregulate RepA synthesis and for initiation and control of DNA replication. Analysis of information (degree of conservation) at the sites revealed three sequence patches of high conservation. By saturation mutagenesis, the conservation at the outer two patches was found to contribute to RepA binding more critically. The guanine bases that are likely to contact RepA through the major groove were identified by methylation interference and methylation protection experiments. These bases mapped to the outer two patches and were separated by one turn of the helix. Therefore, they belong to major grooves on the same face of DNA. All backbone contacts of the protein, determined by hydroxyl radical footprinting, also mapped to the same face. We conclude from this that RepA binds to its site on one face of the DNA. Information analysis of binding sites for several prokaryotic repressors and activators, where the nature of DNA-protein contacts are known, revealed a correlation between the positions of high conservation and the positions of major grooves that faced the protein. The middle patch of high conservation in the RepA binding sites is an exception since in this region a minor groove is likely to face the protein. The simplest model for minor groove contacts suggests that in B-form DNA a T.A base-pair cannot easily be distinguished from an A.T pair by inspection of the minor groove. Yet in the RepA site, a T-->A mutation in the middle patch significantly affects binding. Therefore, the simplest models for both minor and major groove contacts are unlikely. It is possible that the patch determines the proper conformation of the site and thereby contributes to recognition indirectly.

RepA protein of plasmid P1 binds to arrays of 19 bp repeat sequences (iterons) and mediates initiation of replication and its control. Escherichia coli heat shock proteins DnaJ and DnaK can stimulate iteron binding activity of RepA in an ATP-dependent fashion. It has been proposed that RepA binds to DNA as monomers and that the stimulation in binding involves monomerization of RepA dimers which are inactive in the binding reaction. RepA-iteron and RepA-RepA interactions have been measured in this study to determine the equilibrium constants of the two reactions. The apparent KD value for RepA-iteron binding decreased from 10 nM to no more than 0.2 nM at increasing concentrations of the heat shock proteins. The stimulation of binding appears to be due to an increase in active RepA fraction and not to a change in the maximum binding capacity of the active species. This view was deduced from measurements of active RepA fraction, which increased in the presence of heat shock proteins, and from measurements of dissociation rate constants, which were independent of the heat shock protein concentrations. Accounting for the active fractions, the true KD value was estimated to be 0.10(+/- 0.09) nM in 20 mM Tris.HCl (pH 8), 100 mM NaCl, 40 mM KCl, 10 mM MgCl2, 1 mM dithiothreitol, 0.1 mM EDTA, ATP (50 microM), bovine serum albumin (50 micrograms/ml), calf thymus DNA (50 micrograms/ml) and glycerol (5%). The dissociation rate constant was 1.5 x 10(-2) s-1 and the calculated association rate constant was 1.5 x 10(8) M-1 s-1. Ultracentrifugation analyses of RepA at 15,000 r.p.m. in the above buffer but without ATP, bovine serum albumin, calf thymus DNA and glycerol, revealed that the protein was in monomer-dimer equilibrium with a KD of 2.6(+/- 0.2) microM at 5 degrees C. Therefore, at protein concentrations used in the binding reactions, RepA is monomeric (> 99.5%), in confirmation of the earlier result that RepA binds as a monomer. It follows that the species that is stimulated to bind by the heat shock proteins is also a monomeric form of RepA.