Search

Rationale: Obstructive lung disease (OLD) pathogenesis includes inhalational (e.g., smoking) and noninhalational mechanisms (e.g., infections). Human immunodeficiency virus (HIV) has been suggested as a novel OLD risk factor. Substantial data have recently emerged about its effects on lung function and structure, especially in low- to middle-income countries and regarding longitudinal lung function. Objectives: To assess the association of HIV infection with OLD, impaired gas exchange, and emphysema. Methods: In this systematic review and meta-analysis, we searched PubMed, Embase, Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Web of Science, Scopus, Cumulative Index to Nursing and Allied Health Literature, and Global Index Medicus through April 2023 for controlled and observational studies of people living with and without HIV reporting pulmonary function and/or emphysema. Primary outcomes were OLD by spirometry, gas exchange impairment by diffusing capacity of the lung for carbon monoxide, and visual emphysema by computed tomography. We performed random-effects meta-analyses using odds ratios (ORs) with 95% confidence intervals (CIs). This study was registered in PROSPERO (CRD42021268498). Results: We included 95 publications pertaining to 43 unique studies. HIV was associated with OLD (OR, 1.29; 95% CI, 1.02-1.63), impaired gas exchange (OR, 2.63; 95% CI, 0.96-7.24), emphysema (OR, 1.46; 95% CI, 1.02-2.09), and faster lung function decline. OLD risk was greatest in Africans with HIV. There were no gas exchange or emphysema data from Africa. The certainty of evidence was low to very low, primarily because of studies' observational design. Conclusions: People living with HIV have increased risk for OLD, gas exchange impairment, faster lung function decline, and emphysema. OLD risk in HIV varies regionally. We recommend that both spirometry and diffusing capacity of the lung for carbon monoxide be measured in people living with HIV and respiratory symptoms. Future studies should develop and validate HIV-specific screening and case-finding strategies for chronic lung disease.

Purpose: The use of cone-beam computed tomographies (CBCT) in orthodontics and pediatric dentistry is constantly increasing. The aim of this systematic review was to critically appraise and summarize evidence from clinical studies on the prevalence of incidental findings from CBCTs of children and adolescents., Methods: Systematic literature searches without restrictions were undertaken in eight databases from inception up to March 2024 for studies reporting on incidental findings from CBCT images of children and adolescents. After duplicate study selection, data extraction, and risk of bias assessment with a custom tool based on the Joanna Briggs institute's tool for prevalence studies, qualitative (narrative) data synthesis was performed., Results: Ten studies covering a total of 1818 patients (48.5% male; average age 12.3 years) were included. The prevalence of incidental findings ranged from 0.4 to 80.3%, but high heterogeneity was seen between studies (I 2  = 99%). Incidental findings were most often related to airways (63.7%), followed by bone (23.6%), teeth (19.2), spine (26.2) and temporomandibular joint (3.8%). However, several methodological issues existed with included studies (incomplete reporting of patient- or CBCT-related details, incomplete categorization and reporting on the severity of findings, small sample sizes, and research transparency issues)., Conclusion: Evidence indicates that incidental findings can be often found in the CBCTs of child and adolescent patients. However, when a CBCT image is justified for children or adolescents, it should be adequately assessed for incidental findings by either a specialist oral and maxillofacial radiologist or a dentist with appropriate training and experience., Competing Interests: Declarations. Conflict of interest: The authors declare that they have no conflict of interest. Ethics approval: Not applicable to this systematic review of the published literature., (© 2025. The Author(s).)

Objective: Aim of this study was to critically appraise clinical evidence on the potential benefits of adjunctive use of superfoods green tea and turmeric as mouthrinse or local delivery agents in the treatment of periodontal disease., Materials and Methods: Electronic searches were performed in four databases for randomized trials from inception to February 2024 assessing the supplemental use of superfoods green tea and turmeric for gingivitis/periodontitis treatment. After duplicate study selection, data extraction, and risk-of-bias assessment with the RoB 2 tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) with their 95% confidence intervals (CI) were performed., Results: Nineteen studies (814 patients) were included, with 11 on gingivitis and 8 on periodontitis patients. No benefits were seen from the use of mouthwashes containing green tea extract or turmeric for gingivitis treatment, while green tea was associated with smaller Gingival Index (GI) reductions than chlorhexidine (5 studies; MD = 0.08; 95% CI = 0.01 to 0.14; P = 0.01). As far as periodontitis treatment is concerned, local supplementation with turmeric showed no benefits, whereas local supplementation with green tea extract was associated with improved treatment outcomes in terms of probing depth (4 studies; MD=-0.79; 95% CI=-1.29 to -0.29 mm; P = 0.002) and GI (3 studies; MD=-0.53; 95% CI=-1.01 to -0.05; P = 0.02) than the control group. However, the strength of evidence was moderate to very low due to bias, imprecision, and inconsistency., Conclusion: Limited evidence indicates that supplemental use of green tea extract is associated with improved periodontal treatment outcomes. However, the strength of evidence is weak and further research is needed., Clinical Relevance: Green tea extract could be a natural adjunct to enhance periodontal treatment, without the potential side-effects of other adjuncts like chlorhexidine., Competing Interests: Declarations. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Background: Maxillary lateral incisor agenesis is often managed with orthodontic space closure and canine substitution. Anatomic gingival margin heights associated with the maxillary anterior teeth are considered important for achieving aesthetic excellence with space closure, but evidence relating to the perceptions of lay people is poor., Objectives: This study investigated the influence of gingival margin height variation in the maxillary anterior teeth following orthodontic space closure and canine substitution in the absence of maxillary lateral incisor teeth on perceived aesthetics judged by a lay population., Material and Methods: Images of a case treated with space closure and bilateral canine substitution were digitally modified to create gingival margin height variation for the substituted lateral incisors and canines. Six variations were created, including one conforming to accepted norms for anatomic gingival margin heights. Lay people represented by parents of orthodontic patients ranked the images based on aesthetics, with data analysed statistically using linear models at 5%., Results: One hundred and twenty responders were included (median age 48.0 years), 50% male and 81.7% Caucasian, with 87% able to provide specific preferences. In absolute terms, the highest-ranking [image C] had substituted lateral incisor gingival margins below the central incisors (considered normal) but substituted canine margins symmetrically below the substituted lateral incisors (considered to be too low); followed by [image D] with symmetrically level gingival margins; and [image F] with asymmetric substituted lateral incisor margins and substituted canine margins symmetrically too low. The lowest-ranked [image E] had normal substituted lateral incisor margins but asymmetric substituted canine margins. Image C was most often ranked first (29.8% of responders) and image E last (22.1%). After adjusting for potential confounding effects, image E received the worse scores., Conclusions: Anatomic norms for gingival margin height in absent maxillary lateral incisor-canine substitution do not correlate with the highest-ranking aesthetic choices of a lay population. Lateral incisor gingival margins symmetrically below the central incisors and substituted canine margins symmetrically below these ranked highest. Vertical asymmetry in the substituted canine position was considered the least aesthetic., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Orthodontic Society.)

Background: Several appliances or treatment protocols are marketed to either patients or orthodontists as being associated with improved orthodontic outcomes. However, clinical decision-making should be based on robust scientific evidence and not marketing claims or anecdotal evidence., Objective: To identify appliances/protocols being associated with improved outcomes of fixed appliance treatment., Search Methods: Unrestricted literature searches in seven databases/registers for human studies until March 2024., Selection Criteria: Randomized or quasi-randomized clinical trials on human patients of any age, sex, or ethnicity receiving comprehensive orthodontic treatment with fixed appliances and assessing occlusal outcome with either the Peer Assessment Rating (PAR) or the American Board of Orthodontics-Objective Grading System (ABO-OGS) index., Data Collection and Analysis: Duplicate/independent study selection, data extraction, and risk of bias assessment with the Cochrane RoB 2 tool. Random-effects meta-analyses of averages or mean differences with their 95% Confidence Intervals (CI), followed by meta-regression/subgroup/sensitivity analyses and assessment of the quality of clinical recommendations with the Grades of Recommendations, Assessment, Development, and Evaluation (GRADE) approach., Results: Data from 20 small- to moderately-sized trials covering 1470 patients indicated that orthodontic treatment with fixed appliances is effective and results on average in a final PAR score of 6.0 points (95% CI 3.9-8.2 points), an absolute PAR reduction of 23.0 points (95% CI 15.6-30.4 points), a % PAR reduction of 82.6% (95% CI 70.8%-94.4%), and an absolute ABO-OGS score of 18.9 points (95% CI 11.7-26.2 points). However, very high between-study heterogeneity (I2 > 75%) was seen for both PAR and ABO-OGS. Extraction treatment was associated with significantly better occlusal outcome than non-extraction treatment with ABO-OGS (12.9 versus 16.6 points; P = .02). There was no statistically significant difference in occlusal outcome with (i) 0.018″-slot or 0.022″-slot brackets; (ii) customized or prefabricated brackets; (iii) anchorage reinforcement with temporary anchorage devices; (iv) use of vibrational adjuncts; and (v) aligners or fixed appliances (P > .05 in all instances), while small benefits were seen with indirectly bonded brackets., Conclusions: Considerable between-study heterogeneity exists in the reported occlusal outcome of fixed appliance treatment, and different appliances or adjuncts have little effect on this. Standardization and/or automatization of the scoring procedures for PAR and ABO-OGS might help to improve consistency and reliability of outcome measurement in orthodontic trials., Registration: PROSPERO (CRD42024525088)., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Orthodontic Society.)

Background: Extraction of the permanent first molars is sometimes necessitated in children and adolescents due to deep carious lesions or developmental defects., Objective: To estimate the prevalence of spontaneous space closure after extraction of permanent first molars and identify factors associated with it., Search Methods: Unrestricted searches in five databases for human studies until February 2024., Selection Criteria: Longitudinal before-and-after (cohort) human studies assessing eruption of the permanent second molars and spontaneous space closure after extraction of the permanent first molar., Data Collection and Analysis: Study selection, data extraction, and risk of bias assessment were performed in duplicate. Random-effects meta-analyses of average spontaneous space closure prevalences and odds ratios (OR) with their 95% confidence intervals (CI) were performed, followed by meta-regression/sensitivity/reporting biases' analyses and evaluation of our confidence in effect estimates., Results: Sixteen reports pertaining to 15 studies (1 prospective /14 retrospective) were included covering 1159 patients (ages 5.5-15.0 years [mean 10.0 years]; 45% male on average) and 2310 permanent second molars. The prevalence of spontaneous space closure was higher in the maxilla (nine studies; 85.3%; 95% CI = 73.7%-92.3%) than the mandible (11 studies; 48.1%; 95% CI = 34.5%-62.0%) to a significant extent (nine studies; OR = 7.77; 95% CI = 4.99-12.11; P < 0.001). For both maxillary/mandibular second molars, Demirjian category E was associated with increased space closure odds than earlier/later stages (P < 0.05). Spontaneous space closure in the mandible was seen more often for patients ages 8-10 years (compared with older patients; three studies; OR = 3.32; 95% CI = 1.73-6.36; P < 0.001) and when the mandibular permanent third molar was present (four studies; OR = 2.28; 95% CI = 1.67-3.09; P = 0.003). Additional analyses failed to find any significant modifying factors., Limitations: The quality of evidence was very low in all instances due to the inclusion of retrospective studies with methodological issues., Conclusions: Existing evidence indicates that spontaneous space closure in children and adolescents after extraction of the permanent first molar is seen more often in the maxilla than the mandible. Extraction of the permanent first molar at the Demirjian stage E of the second molar and presence of the lower permanent third molar is associated with increased odds of space closure, but uncertainty persists, due to methodological issues of existing studies., Registration: PROSPERO (CRD42023395371)., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Orthodontic Society.)

Plastic aligners have transformed orthodontics, offering a discreet, comfortable, and aesthetically pleasing alternative to traditional fixed appliances. While they have advantages over fixed appliances, they come with environmental and health concerns due to the use of nonbiodegradable plastics, such as the leaching of Bisphenol-A (BPA) and microplastics that can impact human health directly through ingestion. Studies have shown that plastic aligners release microplastics during use, raising concerns about their potential health effects and environmental pollution. The potential health effects of ingested microplastics extend beyond gut microbiota disruption to impact various systems in the body. Research suggests that microplastic exposure can lead to respiratory complications, cardiovascular risks, and implications for brain health and cognitive function. The mechanisms of microplastic uptake into the body through inhalation, ingestion, and skin contact are essential for understanding how these particles interact with human tissues and organs. By prioritizing patient safety, responsible practices, and advancing scientific knowledge the orthodontic community can work towards mitigating the potential health impacts associated with microplastic exposure from aligners., (Copyright © 2024. Published by Elsevier Inc.)

Palatal impaction of the maxillary canine is commonly considered as a genetic condition, while the lateral incisor root has been suggested to guide maxillary permanent canine eruption. This review assessed whether agenesis of the maxillary lateral incisor is associated with eruption disturbances of the maxillary canine (displacement or impaction). Unrestricted searches in six databases for observational case-control human studies until May 2024 assessing eruption disturbances of the permanent maxillary canine in conjunction with permanent maxillary lateral incisor agenesis were performed. Study selection, data extraction and risk-of-bias assessment with the Joanna Briggs Institute's tool were performed in duplicate. Random-effects meta-analyses of odds ratios (ORs) with their 95% confidence intervals (CIs) were performed, followed by meta-regressions and sensitivity analyses. Seventeen reports pertaining to 17 case-control studies were included covering 10,155 patients (11.6 year-old/46% male on average). Maxillary lateral incisor agenesis was associated with eruption disturbance of the maxillary canine (17 studies; OR = 3.88; 95% CI = 2.05-7.34; p < 0.001; I 2  = 58). Lateral incisor agenesis was more associated with canine displacement (7 studies; OR = 7.56; 95% CI = 2.10-27.18; p = 0.008; I 2  = 57) and to a lesser degree with canine impaction (10 studies; OR = 2.39; 95% CI = 1.28-4.48; p = 0.01). No significant effects of patient age or sex were seen, and the results were robust to study design and precision. The quality of evidence was low due to the inclusion of observational case-control studies with methodological issues and residual confounding. Evidence indicates that permanent maxillary lateral incisor agenesis is associated with eruption disturbances of the permanent maxillary canine, including mainly displacement, but also impaction. Trial Registration: PROSPERO database number: CRD42024549898., (© 2024 John Wiley & Sons A/S.)

Purpose: Orthodontic treatment involving premolar extractions might improve the angulation of lower third molars, which are the teeth most often impacted. This study analyzes the impact of first/second lower premolar extraction during orthodontic therapy on the angulation of mandibular third molars., Methods: A total of 120 patients treated non-extraction (n = 40), with extraction of first (n = 40), or second lower premolars (n = 40) were included. The mesiodistal angulation of lower third molars relative to the adjacent tooth and their developmental stage were evaluated from posttreatment orthopantomograms. Between-group differences were statistically evaluated at a significance level of 0.05., Results: The orthopantomograms of 120 patients (51% female) with a median age of 15.2 years at the time of debonding were evaluated after a mean treatment duration time of 2.9 years. No difference (P > 0.05) was seen between the average angulation of the lower third molars of the right (mean = 24.4°, standard deviation [SD] 13.6°) and the left side (mean = 23.6°, SD 14.1°). No differences in the angulation of the lower third molar were found between the non-extraction and extraction groups for the right (P = 0.44) or the left side (P = 0.22). Likewise, no differences were found when comparing the first and second premolars for the right (P = 0.26) or the left side (P = 0.10). Premolar extraction was associated with an advanced root development stage of the right third molar (odds ratio 7.1; 95% confidence interval 1.1-48.1; P = 0.04), with no differences between extraction of the first or second premolar (P = 0.10)., Conclusion: Orthodontic treatment involving premolars extractions might be associated with a small acceleration in root development, but not with the angulation, of lower third molars., (© 2023. The Author(s).)

Objective: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic., Methods: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"-slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post-debond (T3) and analysed statistically at 5%., Results: A total of 157 patients were included (56.7% female; 11.6-year-old at T1), 16.6% of which were treated with premolars extractions. Non-extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P = .04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P > .05) or the first permanent molar (0.06 mm; P > .05). No overall significant differences in absolute relapse were seen between extraction and non-extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%-confidence interval 0.08-0.88; P = .003)., Conclusion: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Introduction: Metallic and elastomeric ligatures are widely used in orthodontics to secure the archwire within the bracket slots, but elastomeric ligatures have traditionally been associated with increased microbial colonization, which could adversely affect periodontal health., Aim: This systematic review compares the periodontal effects of elastomeric and steel ligatures used for orthodontic fixed appliances., Methods: Unrestricted literature search of 7 databases (MEDLINE, Scopus, Web of Science, Embase, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and Virtual Health Library) up to July 2023 were performed for randomized / non-randomized clinical studies on humans comparing the two ligation methods during fixed-appliance therapy. After duplicate study selection, data extraction, and risk-of-bias assessment with the Risk of Bias (RoB) 2 or the Risk Of Bias In Non-randomized Studies - of Interventions (ROBINS-I) tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) and their 95% confidence intervals (CIs) were carried out, followed by assessment of certainty of existing evidence with the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach., Results: A total of 11 studies (3 randomized / 8 non-randomized) with 354 patients (mean age 14.7 years and 42% male) were included. No statistically significant differences were seen for plaque index (5 studies; SMD = 0.48; 95% CI = -0.03 to 1.00; P = 0.07), gingival index (2 studies; MD = 0.01; 95% CI = -0.14 to 0.16; P = 0.89), probing pocket depth (2 studies; MD = 0; 95% CI = -0.17 to 0.16; P = 0.97), or Streptococcus mutans counts (4 studies; SMD = 0.40; 95% CI=-0.41 to 1.20; P = 0.21). Elastomeric ligatures were associated with moderately increased total bacterial load (3 studies; SMD = 0.43; 95% CI = 0.10 to 0.76; P = 0.03). Confidence in these estimates was low in all instances due to the inclusion of non-randomized studies with high risk of bias., Conclusions: Existing low quality evidence indicates that ligature method does not seem to influence the periodontal health during fixed treatment, even if elastomeric ligatures are associated with a moderate increase of bacterial load., Registration: PROSPERO (CRD42023444383)., (© 2024. The Author(s).)

Background: The aim of the present study was to investigate qualitatively and quantitatively the elution of substances from polyester-urethane (Invisalign™) aligners and resin composite attachments (Tetric EvoFlow) in vivo., Methods: Patients (n = 11) treated with the aligners and attachments (16 per patient, without other composite restorations) for an average of 20 months, who were planned for attachment removed were enrolled in the study. Patients were instructed to rinse with 50 mL of distilled water upon entry and the rinsing solution was collected (before removal). Then, the attachments were removed with low-speed tungsten carbide burs for adhesive residue removal, a thorough water rinsing was performed immediately after the grinding process to discard grinding particle residues, and subsequently, after a second water-rinsing the solution was collected for analysis (after removal). The rinsing solutions were analyzed for targeted (LC-MS/MS: Bis-GMA, DCDMA, UDMA, BPA) and untargeted (LC-HRMS: screening of leached species and their degradation products) compounds., Results: Targeted analysis revealed a significant reduction in BPA after attachment removal (4 times lower). Bis-GMA, DCDMA, UDMA were below the detection limit before removal but were all detectable after removal with Bis-GMA and UDMA at quantifiable levels. Untargeted analysis reviled the presence of mono-methacrylate transformation products of Bis-GMA (Bis-GMA-M1) and UDMA (UDMA-M1), UDMA without methacrylate moieties (UDMA-M2), and 4-(dimethylamino) benzoic acid (DMAB), the degradation product of the photo-initiator ethyl-4-(dimethylamino) benzoate (EDMAB), all after attachment removal. Several amino acids and endogenous metabolites were also found both before and after removal., Conclusions: Elevated levels of BPA were traced instantaneously in patients treated with Invisalign™ and flowable resin composite attachments for the testing period. BPA was reduced after attachment removal, but residual monomers and resin degradation products were found after removal. Alternative resin formulations and attachment materials may be utilized to reduce eluents., (© 2024. The Author(s).)

Aim: Two-phase treatment for children with Class II malocclusion with several functional appliances is still performed by many orthodontists, while the Activator and the Bionator appliances are two of the most popular ones. Aim of this study was to compare the skeletal and dentoalveolar effects of treatment with these two appliances., Methods: Class II children treated with Activator or Bionator in the first phase, followed by a phase of fixed appliances were included. Skeletal and dentoalveolar parameters were assessed from lateral cephalograms and analysed with linear regressions at 5%., Results: A total of 89 patients (mean age 10.0 years; 47% female) were included. During the first phase, Bionator increased less the SNB (difference in mean treatment-induced changes [MD] -0.7°; 95% confidence interval [CI] -1.3 to -0.2°; P=0.01) and decreased less the ANB angle (MD 0.6°; 95% CI 0 to 1.1°; P=0.03) compared to Activator. Activator slightly increased the facial axis and Bionator reduced it (MD -1.6°; 95% CI -2.3 to -0.8°; P<0.001). Compared to Activator, the Bionator retroclined more the upper incisors (MD -2.4°; 95% CI -4.6 to -0.2°; P=0.03) and increased more the interincisal angle (MD 2.9°; 95% CI 0.5 to 5.4°; P=0.02). After the second phase (6.2 years after baseline), the only differences were a reduced facial axis (MD -1.3°; 95% CI -2.2 to -0.3°; P=0.008) and an increased maxillary rotation (MD 0.9°; 95% CI 0 to 1.8°; P=0.04) with Bionator compared to Activator., Conclusion: Similar dentoalveolar effects were seen overall with two-phase treatment with either appliance, with Bionator being associated with more vertical increase compared to Activator., (Copyright © 2024 The Author(s). Published by Elsevier Masson SAS.. All rights reserved.)

Purpose: Adequate control of the vertical dimension is of great importance in orthodontic treatment. Although existing evidence is very limited, extraction of four premolars is thought to contribute towards improved control of anterior facial height compared with non-extraction treatment protocols. Thus, the aim of this retrospective cohort study was to compare the effect of fixed-appliance treatment with extraction of four premolars to non-extraction treatment on the skeletal vertical dimension., Methods: A consecutive sample of 76 children with skeletal hyperdivergence (49% male; mean age 11.9 years) was divided into two groups for treatment with either non-extraction (n = 31) or extraction of four premolars (n = 45). Baseline characteristics were comparable: overjet 5.1 ± 2.5 mm, overbite 2.4 ± 1.9 mm, ANB angle 4.6 ± 2.3°, and SN-ML angle 40.2 ± 3.5°. Patients were treated with standard edgewise fixed appliances with closing loops/sliding mechanics. Vertical skeletal and dental outcomes were measured on lateral cephalograms before and after treatment. Data were analyzed with linear regression at 5%., Results: Compared to non-extraction treatment, treatment with premolar extractions had no significant effect on the SN-ML angle (difference (Δ) = 0.07°; 95% confidence interval -0.90 to 1.01°; P = 0.88). Statistically significant changes between the extraction and non-extraction groups were only found for the parameters SNA (Δ -1.47°; P = 0.003), ANB (Δ -1.17°; P = 0.004), SN-OP (Δ -1.48°; P = 0.04), and L1-ML (Δ -6.39°; P < 0.001)., Conclusion: Orthodontic treatment of children with skeletal hyperdivergence using systematic extraction of four premolars had minimal effects on the vertical facial dimension compared to non-extraction treatment., (© 2022. The Author(s).)

Background: Craniofacial skeletal discrepancies have been associated with upper airway dimensions., Objective: To identify differences in upper airway volume across different sagittal and vertical skeletal patterns., Search Methods: Unrestricted literature searches in eight databases/registers for human studies until May 2023., Selection Criteria: Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology., Data Collection and Analysis: Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach., Results: Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total  pharyngeal airway volume, with Class II having decreased airway volume (-2256.06 mm3; 95% Confidence Interval [CI] -3201.61 to -1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (-1716.77 mm3; 95% CI -3296.42 to -137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA., Conclusions: Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children-adult patients, and incomplete reporting., Clinical Trial Registration: PROSPERO (CRD42022366928)., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Orthodontic Society.)

Introduction: This study aimed to discover the genetic and environmental factors that contribute to the mandibular development of untreated monozygotic and dizygotic twins., Material and Methods: The sample, taken from the Forsyth Moorrees Twin Study, included 52 untreated monozygotic twins (36 male, 16 female) and 46 untreated dizygotic twins (23 male, 23 female). At the ages of 12 and 17, lateral cephalograms were collected and traced to assess total mandibular length, mandibular ramus length, mandibular corpus length, gonial angle, SNB, and bony chin prominence. The genetic and environmental components of variation were assessed using multilevel mixed-effects structural equation modelling., Results: At 12 years of age, high additive genetic influences were observed for total mandibular length (74%), gonial angle (76%), SNB (41%), and bony chin prominence (64%), whereas strong dominant genetic components were observed for corpus length (72%), and mandibular ramus length was under unique environment influence (54%). At 17 years of age, only total mandibular length (45%), ramus length (53%), gonial angle (76%), and bony chin prominence (68%) were under strong additive genetic control, while the remainder were under strong dominant genetic control., Conclusions: Although monozygotic and dizygotic twins share at least a portion of their DNA, additive, dominant, or environmental components were discovered during adolescence. Nonetheless, by the age of 17, the majority of the mandibular traits are under either additive or dominant genetic impact., (Copyright © 2023 The Author(s). Published by Elsevier Masson SAS.. All rights reserved.)

Purpose: This study was conducted to explore the preference and experience of paediatric dentists based in Switzerland regarding the use of articaine and other local and topical anaesthesia., Methods: An 18-question survey was developed, piloted, and distributed to the members of the Swiss association of paediatric dentistry (n = 460). The following information were collected: most used local anaesthetic in different age groups, time needed to inject a full ampule, frequency of observed local and systemic side effects, application of topical anaesthetic prior to injection, time waited between application and the injection, and perceived effectiveness of topical anaesthetic. The dentists' responses were analysed with logistic regressions reporting odds ratios (OR) and 95% confidence intervals (CI) at 5%., Results: The response rate was 37% (n = 168) out of the 460 questionnaires sent, with the responders being predominantly female (67%) and 47-year-old on average. More than 80% of the dentists used articaine in all age groups. 45% of responders took longer than 60 s to inject a full ampule. Local and systemic side-effects were observed by 82% and 28% of respondents respectively, although the nature and the significance of those were not detailed due to the anonymous nature of the questionnaire. Significantly less local adverse effects were seen for older children (p = 0.04) and among dentists with more years of experience (p = 0.01). Most responders applied topical anaesthetic and half of them waited longer than 60 s before injection., Conclusions: Articaine is a widely used local anaesthetic by the studied group of Swiss paediatric dentists regardless of patient's age. The use of topical anaesthetic before injection is a common practice with good perceived effectiveness., (© 2023. The Author(s).)

Purpose: The purpose of this study was to assess differences in the fundamental mechanical properties of resin-made three-dimensional (3D) printed orthodontic aligners according to the printing orientation., Methods: Twenty resin 3D-printed dumbbell-shaped specimens and 20 orthodontic aligners were fabricated and postcured in nitrogen. Half of the specimens and aligners were built in horizontal (H), the other half in vertical (V) directions. The dumbbell-shaped specimens were loaded in a tensile testing machine, while parts of the aligners were embedded in acrylic resin, ground, polished, and then underwent instrumented indentation testing (IIT). Mechanical properties that were assessed included the yield strength (YS), breaking strength (BS), plastic strain (ε), Martens hardness (HM), indentation modulus (E IT ), elastic index (η IT ), and indentation relaxation (R IT ). Data were analyzed statistically with independent t‑tests or Mann-Whitney tests at α = 5%., Results: No significant differences were found between specimens or aligners printed either in a horizontal or a vertical direction (P > 0.05 in all instances). Overall, the 3D-printed aligners showed acceptable mechanical propertied in terms of YS (mean 19.2 MPa; standard deviation [SD] 1.7 MPa), BS (mean 19.6 MPa; SD 1.2 MPa), ε (mean 77%; SD 11%), HM (median 89.0 N/mm 2 ; interquartile range [IQR] 84.5-90.0 NN/m 2 ), E IT (median 2670.5 MPa; IQR 2645.0-2726.0 MPa), η IT (median 27.5%; IQR 25.9-28.1%), and R IT (mean 65.1%; SD 3.5%)., Conclusion: Printing direction seemed to have no effect on the mechanical properties of 3D-printed resin aligners, which are promising for orthodontic use., (© 2024. The Author(s).)

Background: Cervical headgear (cHG) has been shown to be effective in Class II correction both with dental and orthopaedic effects but has traditionally been associated with vertical adverse effects in terms of posterior mandibular rotation., Objective: To assess the treatment effects of cHG treatment in the vertical dimension., Search Methods: Unrestricted literature search of five databases up to May 2023., Selection Criteria: Randomized/non-randomized clinical studies comparing cHG to untreated controls, high-pull headgear (hp-HG), cHG adjuncts, or other Class II treatment alternatives (functional appliances or distalisers)., Data Collection and Analysis: After duplicate study selection, data extraction, and risk-of-bias assessment according to Cochrane, random-effects meta-analyses of mean differences (MD)/standardized mean diffences (SMD) and their 95% confidence intervals (CIs) were performed, followed by meta-regressions, sensitivity analyses, and assessment of certainty on existed evidence., Results: Two randomized/16 non-randomized studies (12 retrospective/4 prospective) involving 1094 patients (mean age 10.9 years and 46% male) were included. Compared to natural growth, cHG treatment was not associated on average with increases in mandibular (eight studies; SMD 0.22; 95% CI -0.06, 0.49; P = 0.11) or maxillary plane angle (seven studies; SMD 0.81; 95% CI -0.34, 1.95; P=0.14). Observed changes translate to MDs of 0.48° (95% CI -0.13, 1.07°) and 1.22° (95% CI -0.51, 2.94°) in the SN-ML and SN-NL angles, respectively. No significant differences were seen in y-axis, facial axis angle, or posterior face height (P > 0.05). Similarly, no significant differences were found between cHG treatment and (i) addition of a lower utility arch, (ii) hp-HG treatment, and (iii) removable functional appliance treatment (P > 0.05 for all). Meta-regressions of patient age, sex, or duration and sensitivity analyses showed relative robustness, while our confidence in these estimates was low to very low due to the risk of bias, inconsistency, and imprecision., Conclusions: cHG on average is not consistently associated with posterior rotation of the jaws or a consistent increase in vertical facial dimensions among Class II patients., Registration: PROSPERO registration (CRD42022374603)., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Orthodontic Society.)

Objectives: Three-dimensional (3D)-printed aligners present a promising orthodontic treatment modality, whose clinical success largely depends on the material's mechanical properties. The aim of this study was to evaluate the mechanical properties of resin-made 3D-printed aligners and assess the effect of two different post-curing conditions., Materials and Methods: Forty dumbbell-shaped specimens and 40 resin aligners were 3D-printed and divided into four equal groups according to post-curing conditions: presence or absence of oxygen during post-curing and water heat treatment at 85°C for 15 s or none. Samples from the central incisor of the aligner (n = 5/group) were studied by Attenuated Total Reflection Fourier-transform infrared spectroscopy (ATR-FTIR). The dumbbell-shaped specimens were loaded up to fracture under tensile mode and yield strength, ultimate tensile strength, elastic and plastic strain were calculated. The first mandibular molar area from 3D-printed aligners (n = 10/group) was cut and embedded in acrylic resin and then underwent metallographic grinding and polishing followed by instrumented indentation testing to determine the following mechanical properties: Martens hardness, indentation modulus, elastic index, and indentation relaxation. After descriptive statistics, differences according to each post-curing protocol, as well as their combination, were analyzed with linear regression modeling at a 5% significance level., Results: All groups showed identical ATR-FTIR spectra, while no statistically significant effects were seen for either post-curing protocol (N2 presence and heat treatment) or their combination (P > .05 in all instances)., Conclusions: The mechanical properties of 3D-printed resin aligners were not considerably affected either by post-curing in N2 atmosphere or heat treatment., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Orthodontic Society.)

This review covers aspects of orthodontic materials, appliance fabrication and bonding, crossing scientific fields and presenting recent advances in science and technology. Its purpose is to familiarize the reader with developments on these issues, indicate possible future applications of such pioneering approaches, and report the current status in orthodontics. The first section of this review covers shape-memory polymer wires, several misconceptions arising from the recent introduction of novel three-dimensional (3D)-printed aligners (mistakenly termed shape-memory polymers only because they present a certain degree of rebound capacity, as most non-stiff alloys or polymers do), frictionless surfaces enabling resistance-less sliding, self-healing materials for effective handling of fractured plastic/ceramic brackets, self-cleaning materials to minimize microbial attachment or plaque build-up on orthodontic appliances, elastomers with reduced force relaxation and extended stretching capacity to address the problem of inadequate force application during wire-engagement in the bracket slot, biomimetic (non-etching mediated) adhesive attachment to surfaces based on the model of the gecko and the mussel, and command-debond adhesives as options for an atraumatic debonding. This review's second section deals with the recent and largely unsubstantiated application of 3D-printed alloys and polymers in orthodontics and aspects of planning, material fabrication, and appliance design., Competing Interests: TE and SNP have no conflict of interest to declare. NP discloses a financial interest with the company Coruo (Limoges, France) concerning the orthodontic computer-aided design software UBrackets., (© 2023 The Authors.)

Background: Maxillary incisor and canine teeth are commonly impacted and require multidisciplinary treatment to accommodate them in the dental arch., Objectives: To assess the periodontal outcomes of impacted maxillary central incisor and canine teeth, which have been successfully aligned in the arch following surgical exposure and orthodontic traction with fixed appliance therapy., Search Methods: Systematic literature searches without restrictions were undertaken in eight databases., Selection Criteria: Studies reporting surgical interventions in combination with orthodontic traction with fixed appliance therapy to align impacted maxillary incisors or canines published up to January 2023., Data Collection: Duplicate independent study selection, data extraction, and risk of bias assessment., Analysis: Random-effects meta-analyses of aggregate data., Results: Twenty-three studies (21 retrospective and 2 prospective) were included in the final analysis. Three studies reported outcomes for maxillary central incisors and 20 reported outcomes for maxillary canines. For maxillary central incisors, all three studies were rated as being at moderate risk of bias. For maxillary canines, 17 studies and 1 study were rated at moderate and high risk of bias, respectively. Both prospective studies were rated at a low risk of bias. Meta-analyses comparing aligned impacted maxillary canines to their non-impacted contralateral counterparts found the former had increased Plaque Index scores (mean difference [MD] 0.19; 95% confidence interval [CI] 0.03, 0.35; P = 0.03), increased clinical attachment loss (MD 0.40 mm; 95% CI 0.17, 0.63; P = 0.01), increased pocket probing depth (MD 0.18 mm; 95% CI 0.07, 0.28; P = 0.001), increased bone loss (MD 0.51 mm; 95% CI 0.31, 0.72; P < 0.001), and reduced keratinized gingival width (MD -0.31 mm; 95% CI -0.61, -0.01; P = 0.04)., Conclusions: Limited evidence suggests that surgical exposure and orthodontic alignment of impacted maxillary central incisor or canine teeth, results in modest adverse effects in the periodontium. These findings should be viewed with caution as our certainty for these outcomes is very low to low due to the bias and heterogeneity. Further well-conducted studies reporting patient centred outcomes are required., Registration: PROSPERO (CRD42020225639)., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Objectives: Three-dimensional (3D) printing technology is a promising manufacturing technique for fabricating ceramic brackets. The aim of this research was to assess fundamental mechanical properties of in-office, 3D printed ceramic brackets., Materials and Methods: 3D-printed zirconia brackets, commercially available polycrystalline alumina ceramic brackets (Clarity, 3 M St. Paul, MN) and 3D-printed customized polycrystalline alumina ceramic ones (LightForce™, Burlington, Massachusetts) were included in this study. Seven 3D printed zirconia brackets and equal number of ceramic ones from each manufacturer underwent metallographic grinding and polishing followed by Vickers indentation testing. Hardness (HV) and fracture toughness (K1c) were estimated by measuring impression average diagonal length and crack length, respectively. After descriptive statistics calculation, group differences were analysed with 1 Way ANOVA and Holm Sidak post hoc multiple comparison test at significance level α = .05., Results: Statistically significant differences were found among the materials tested with respect to hardness and fracture toughness. The 3D-printed zirconia proved to be less hard (1261 ± 39 vs 2000 ± 49 vs 1840 ± 38) but more resistant to crack propagation (K1c = 6.62 ± 0.61 vs 5.30 ± 0.48 vs 4.44 ± 0.30 MPa m 1/2 ) than the alumina brackets (Clarity and Light Force respectivelty). Significant differences were observed between the 3D printed and the commercially available polycrystalline alumina ceramic brackets but to a lesser extent., Conclusions: Under the limitations of this study, the 3D printed zirconia bracket tested is characterized by mechanical properties associated with advantageous orthodontic fixed appliances traits regarding clinically relevant parameters., (© 2023 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Purpose: Aim of the present study was to assess the relative distribution of occlusal forces after orthodontic treatment and during the first 3 months of the retention phase using a computerized occlusal analysis system (T-Scan, Tekscan Inc., Norwood, MA, USA)., Materials and Methods: A total of 52 patients were included in this prospective cohort study and underwent analysis of occlusal forces on the level of tooth, jaw-half, and -quadrant during a 3-month period. Furthermore, differences between three retention protocols (group I: removable appliances in both jaws; group II: fixed 3-3 lingual retainers in both jaws; group III: removable appliance in the maxilla and fixed 3-3 lingual retainer in mandible) were assessed with Wilcoxon signed-rank tests at 5%., Results: Directly after debonding, measured forces distribution were similar to published references for untreated samples. In the following, no significant difference was found between retention protocols II and III with regard to the asymmetry of the anterior occlusal forces. Both groups maintained an asymmetric force distribution in the anterior segment during the study period. There was also no difference between groups II and III in the distribution of occlusal forces for the posterior segments. Both retention concepts kept the symmetrical distribution of occlusal forces stable over the observation period. The retention concept of group I demonstrated a symmetrical distribution of occlusal forces in the anterior segment after debonding and this remained stable during the 3‑month period. In the posterior segment, no improvement of the initially asymmetric masticatory force distribution could be observed., Conclusions: All three studied retention protocols showed stability in retaining their original symmetrical or asymmetrical occlusal force distribution posteriorly/anteriorly during the 3‑month observation period. Therefore, an even distribution of occlusal forces should be the aim of the finishing phase, as no relative benefit of any single retention scheme in terms of post-debond improvement during the retention phase was seen., (© 2023. The Author(s).)

Objectives: Interproximal enamel reduction (IPR) is routinely used in orthodontics to generate small to moderate amounts of space within the dental arch. Aim of this ex vivo study was to evaluate the effect of two different IPR systems on the enamel surface's waviness, roughness, and elemental composition after 6 months of intraoral exposure., Materials and Methods: Fifteen orthodontic extraction patients were included in the present study. The 39 healthy premolars, which were scheduled to be extracted, were subjected to IPR at least 6 months before their extraction. IPR was performed on their mesial side with two different methods: (1) instrumented method with the Ortho-Strips system (on handpiece) and (2) manually with the Intensiv ProxoStrip (strips)-each with four different grits for contouring, finishing, and polishing. The distal side of each premolar served as its own internal control. Treated and untreated tooth surfaces were evaluated by optical profilometry, Raman, and scanning electron microscope/X-ray energy-dispersive (EDX) analyses. Data were analysed with descriptive statistics and generalized linear models at alpha = 5%., Results: Both IPR methods significantly reduced the waviness of the enamel surface (P < 0.001), with manual IPR leading to smaller waviness reductions than the instrumented IPR (P ≤ 0.001). On the other side, both IPR methods led to a significant increase in enamel surface roughness (P < 0.001), with no significant differences between IPR methods. EDX and Raman analyses did not demonstrate any alterations on elemental composition of enamel after at least 6 months of intraoral exposure., Conclusions: Both stripping systems led to a flatter but rougher enamel surface. Further polishing is needed to restore the initial enamel smoothness. The elemental composition of the stripped enamel returns to the baseline level after 6 months of intraoral exposure., (© The Author(s) 2022. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Introduction: Dentists' knowledge and expertise, especially in their early career, are primarily shaped during undergraduate studies. This cross-sectional study aimed to assess the knowledge and perception of Syrian under- and postgraduate students regarding diagnosing and managing molar-incisor hypomineralisation (MIH)-affected teeth., Materials and Methods: Final-year dental students (FY-students), postgraduates in paediatric dentistry (PD-postgraduates) and postgraduates in other lines of specialty (OS-postgraduates) in all Syrian dental schools were invited to participate in an established web-based survey covering the knowledge and attitudes regarding the prevalence, aetiology, diagnosis and management of MIH. Data were analysed with descriptive statistics and Fisher's exact/chi-squared tests at 5%., Results: In total, 1142 post- and undergraduate students from six public and five private dental schools in Syria participated in this study (867 FY-students, 74 PD-postgraduates and 201 OS-postgraduates). PD-postgraduates were found to present statistically significantly better knowledge regarding MIH compared with the two other groups. Only 19% of FY-students and 54% of OS-postgraduates reported themselves familiar with MIH (compared with 97% of PD-postgraduates). Similarly, 18% of FY-students and 27% of OS-postgraduates were capable of diagnosing MIH (compared with 81% of PD-postgraduates). Stainless-steel crowns and direct composite fillings were chosen as most suitable for treating MIH-affected molars from all responders., Conclusions: FY-students and even OS-postgraduates in Syria lack knowledge and confidence when confronted with MIH. The university curricula need to include more educational materials to equip the students with the necessary tools to manage MIH clinically., (© 2022 The Authors. European Journal of Dental Education published by John Wiley & Sons Ltd.)

Introduction: This study aimed to evaluate changes in palatal shape after orthodontic treatment from a borderline sample of extraction and nonextraction patients with a Class I relationship., Methods: A borderline sample regarding premolar extractions was obtained through discriminant analysis and comprised 30 nonextraction and 23 extraction patients. The digital dental casts of these patients were digitized with 3 curves and 239 landmarks placed on the hard palate. Procrustes superimposition and principal component analysis were implemented to assess group shape variability patterns., Results: The success of the discriminant analysis in identifying a borderline sample regarding the extraction modality was validated using geometric morphometrics. Concerning palatal shape, no sexual dimorphism was found (P = 0.78). The first 6 principal components that were statistically significant accounted for 79.2% of the total shape variance. Palatal changes were 61% more pronounced in the extraction group, which exhibited a decrease in palatal length (P = 0.02; 10,000 permutations). In contrast, the nonextraction group showed an increase in the palatal width (P <0.001; 10,000 permutations). Intergroup comparisons indicated that the nonextraction group exhibited longer palates, whereas the extraction group exhibited higher palates (P = 0.02; 10,000 permutations)., Conclusions: Considerable changes in palatal shape were seen for the nonextraction and extraction treatment group, with the latter exhibiting more pronounced changes, mainly in terms of palatal length. Further investigations are needed to clarify the clinical significance of the palatal shape changes in borderline patients after extraction and nonextraction treatment., (Copyright © 2023 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: To assess the pain profile of patients in the levelling/alignment phase of orthodontic treatment, as reported from randomized clinical trials., Materials and Methods: Five databases were searched in September 2022 for randomized clinical trials assessing pain during levelling/alignment with a visual analogue scale (VAS). After duplicate study selection, data extraction, and risk-of-bias assessment, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression, and certainty analyses., Results: A total of 37 randomized trials including 2277 patients (40.3% male; mean age 17.5 years) were identified. Data indicated quick pain initiation after insertion of orthodontic appliances (n = 6; average = 12.4 mm VAS), a quick increase to a peak at day 1 (n = 29; average = 42.4 mm), and gradually daily decrease the first week until its end (n = 23; average = 9.0 mm). Every second patient reported analgesic use at least once this week (n = 8; 54.5%), with peak analgesic use at 6 h post-insertion (n = 2; 62.3%). Patients reported reduced pain in the evening compared to morning (n = 3; MD =  - 3.0 mm; 95%CI =  - 5.3, - 0.6; P = 0.01) and increased pain during chewing (n = 2; MD = 19.2 mm; 95% CI = 7.9, 30.4; P < 0.001) or occlusion of the back teeth (n = 2; MD = 12.4 mm; 95% CI = 1.4, 23.4; P = 0.3), while non-consistent effects were seen for patient age, sex, irregularity, or analgesic use. Subgroup analyses indicated increased pain among extraction cases and during treatment of the lower (rather than the upper) arch, while certainty around estimates was moderate to high., Conclusions: Evidence indicated a specific pain profile during orthodontic levelling/alignment, without signs of consistent patient-related influencing factors., (© 2023. The Author(s).)

Introduction: A failure of maxillary incisor eruption is commonly attributed to the presence of a supernumerary tooth. This systematic review aimed to assess the percentage of impacted maxillary incisors that successfully erupt after surgical removal of supernumerary teeth with or without other interventions., Methods: Systematic literature searches without restrictions were undertaken in 8 databases for studies reporting any intervention aimed at facilitating incisor eruption, including surgical removal of the supernumerary alone or in conjunction with additional interventions published up to September 2022. After duplicate study selection, data extraction, and risk of bias assessment according to the risk of bias in nonrandomized studies of interventions and Newcastle-Ottawa scale, random-effects meta-analyses of aggregate data were conducted., Results: Fifteen studies (14 retrospective and 1 prospective) were included with 1058 participants (68.9% male; mean age, 9.1 years). The pooled eruption prevalence for removal of the supernumerary tooth with space creation or removal of the supernumerary tooth with orthodontic traction was significantly higher at 82.4% (95% confidence interval [CI], 65.5-93.2) and 96.9% (95% CI, 83.8-99.9) respectively, compared with removal of an associated supernumerary only (57.6%; 95% CI, 47.8-67.0). The odds of successful eruption of an impacted maxillary incisor after removal of a supernumerary were more favorable if the obstruction was removed in the deciduous dentition (odds ratio [OR], 0.42; 95% CI, 0.20-0.90; P = 0.02); if the supernumeraries were conical (OR, 2.91; 95% CI, 1.98-4.28; P <0.001); if the incisor was in the correct position (OR, 2.19; 95% CI, 1.14-4.20; P = 0.02), at the level of the gingival third (OR 0.07; 95% CI, <0.01-0.97; P = 0.04) and had incomplete root formation (OR, 9.02; 95% CI, 2.04-39.78; P = 0.004). Delaying removal of the supernumerary tooth 12 months after the expected eruption time of the maxillary incisor (OR, 0.33; 95% CI, 0.10-1.03; P = 0.05) and waiting >6 months for spontaneous eruption after removal of the obstacle (OR, 0.13; 95% CI, 0.03-0.50; P = 0.003) was associated with worse odds for eruption., Conclusions: Limited evidence indicated that the adjunctive use of orthodontic measures and removal of supernumerary teeth might be associated with greater odds of successfull impacted incisor eruption than removal of the supernumerary tooth alone. Certain characteristics related to supernumerary type and the position or developmental stage of the incisor may also influence successful eruption after removal of the supernumerary. However, these findings should be viewed with caution as our certainty is very low to low because of bias and heterogeneity. Further well-conducted and reported studies are required. The results of this systematic review have been used to inform and justify the iMAC Trial., (Crown Copyright © 2023. Published by Elsevier Inc. All rights reserved.)

Introduction Orthodontic service provision relies on good organisational systems for high standards of patient care and safety. Human factors (HFs) are non-technical skills associated with communication, leadership and teamwork, important for safe patient care. This investigation explored attitudes and understanding of HFs within orthodontic clinical training in the United Kingdom.Materials and methods A questionnaire-based qualitative and quantitative analysis including members of the orthodontic clinical team was undertaken at two teaching centres. A modified Operating Rooms Managements Attitudes questionnaire was used with a 5-point Likert scale. Participants indicated agreement or disagreement with statements around nine themes: leadership structure; confidence assertion; information sharing; stress; fatigue; teamwork; work values; error-procedural compliance; and organisational climate. Internal consistency among themes was assessed with Cronbach's alpha and differences in responses with chi-squared tests at 5%.Results In total, 80 responses were received from 96 invitees. Positive attitudes towards teamwork, error-procedural compliance, and organisational climate were found. Orthodontic consultants, trainees, and nurses recognised that human error is not a sign of incompetence. Stress and fatigue were less acknowledged by consultants and trainee groups. Trainees, nurses and therapists valued information sharing over the consultant group. Orthodontic trainees and nurse responses suggested further training might be required in leadership structure, confidence assertion, and work values.Conclusions Differences in attitudes and understanding of HFs within different professional groups in the orthodontic team exist., (© 2023. The Author(s), under exclusive licence to the British Dental Association.)

Background: Proper oral hygiene and absence of periodontal inflammation is pre-requisite for orthodontic treatment. Chlorhexidine (CHX) is an established oral antiseptic used in the treatment of periodontal disease, but its role in orthodontic therapy is unclear., Objectives: To assess the efficacy of adjunct use of CHX-containing products in maintaining gingival health among orthodontic patients with fixed appliances., Search Methods: Five databases were searched without limitations up to August 2021., Selection Criteria: Randomized clinical trials (RCTs) assessing Gingival Index (GI) (primary outcome), Plaque Index (PI), Bleeding Index (BI), or Pocket Probing Depth (PPD)., Data Collection and Analysis: Study selection, data extraction, and risk of bias assessment were done independently in duplicate. Random-effects meta-analyses of mean differences (MDs) or standardized mean differences (SMDs) with their 95% confidence intervals (CIs) were conducted, followed by sensitivity and Grades of Recommendations, Assessment, Development and Evaluation analysis., Results: Twenty RCTs (1001 patients) were included assessing CHX-containing mouthwashes (n = 11), toothpastes (n = 2), gels (n = 3), or varnishes (n = 4) compared to placebo/control (n = 19) or sodium fluoride-products (n = 4). In the short-term, CHX-containing mouthwash was associated with lower GI (n = 9; MD = -0.68; 95% CI = -0.97 to -0.38; P < 0.001; high quality), lower PI (n = 9; MD = -0.65; 95% CI = -0.86 to -0.43; P < 0.001; high quality), lower BI (n = 2; SMD = -1.61; 95% CI = -2.99 to -0.22; P = 0.02; low quality), and lower PPD (n = 2; MD = -0.60 mm; 95% CI = -1.06 to -0.14 mm; P = 0.01; low quality). No considerable benefits were found from the use of CHX-gel or CHX-varnish in terms of GI, PI, or PPD (P > 0.05/low quality in all instances). Use of a CHX-containing toothpaste was more effective in lowering PI (Heintze-index) than adjunct use of fluoride-containing mouthwash (n = 2; MD = -5.24; 95% CI = -10.46 to -0.02; P = 0.04), but not GI (P = 0.68) or BI (P = 0.27), while sensitivity analyses indicated robustness., Conclusions: Adjunct use of CHX mouthwash during fixed-appliance treatment is associated with improved gingival inflammation, plaque control, and pocket depths, but caution is warranted and recommendations about CHX use during orthodontic treatment of children/adults should consider the heterogeneous patient response, cost-effectiveness, and potential adverse effects., Registration: PROSPERO registration (CRD42021228759)., (© The Author(s) 2022. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Introduction: Space closure is a challenging and time-consuming phase of orthodontic treatment with fixed appliances. This systematic review evaluated canine retraction duration using fixed appliances after maxillary first premolar extraction., Methods: Unrestricted systematic literature searches were conducted in 8 databases for randomized clinical trials, assessing the duration and rate of maxillary canine retraction using fixed appliances with or without treatment adjuncts published up to July 2021. Study selection, data extraction, and risk of bias evaluation were conducted independently and in duplicate. Random-effects meta-analyses of average rates or mean differences (MD) and 95% confidence intervals (CI) were conducted at α = 5%, followed by sensitivity and Grading of Recommendations Assessment, Development, and Evaluation analysis., Results: Fifty randomized clinical trials (6 parallel and 44 split-mouth designs) covering 811 participants (mean age 19.9 years; 34% male) were included. The estimated average pooled duration to achieve complete canine retraction was 4.98 months (2 trials; 95% CI, -2.9 to 12.88 months). Pooled average canine retraction was 0.97 mm at months 0-1 (23 trials; 95% CI, 0.79-1.16), 1.83 mm at months 0-2 (20 trials; 95% CI, 1.52-2.14), 2.44 mm at months 0-3 (23 trials; 95% CI, 2.10-2.79), 3.49 mm at months 0-4 (6 trials; 95% CI, 1.81-5.17) and 4.25 mm at months 0-5 (2 trials; 95% CI, 0.36-8.14). Surgically-assisted orthodontics was associated with greater canine retraction at all time points: months 0-1 (10 trials; MD, 0.52 mm; P = 0.004), months 0-2 (8 trials; MD, 0.53 mm; P = 0.04), months 0-3 (8 trials; MD, 0.67 mm; P = 0.01), and months 0-4 (3 trials; MD, 1.13 mm; P = 0.01), whereas subgroup analyses indicated significant effects of anchorage reinforcement method and bracket slot size on canine retraction., Conclusions: The average time to achieve complete retraction of the maxillary canine using fixed appliances was around 5.0 months. Most studies used split-mouth randomization to investigate canine retraction for around 1-3 months, with substantial heterogeneity across studies. At 3 months of treatment, high-quality evidence supported greater canine retraction with surgically-assisted orthodontics., (Copyright © 2022. Published by Elsevier Inc.)

Purpose: To identify clinically relevant factors for changes in axial angulation of incisors during routine fixed appliance orthodontic treatment., Methods: A total of 106 patients (grades 1-2 of IOTN, 64 females, 42 males; mean age: 15.5 years) from a private practice and treated with metal or ceramic brackets were included in this retrospective cohort study. The axial angulation of the upper and lower incisors was measured on lateral cephalograms before insertion of the first rectangular 0.016 × 0.022-in NiTi archwire (T0) and at the end of treatment about 8 weeks after insertion of the working 0.019 × 0.025-in stainless steel archwire (T1). Treatment-related changes according to bracket type, initial situation, premolar extraction, angle class, and skeletal vertical configuration were analyzed., Results: Although statistically significant treatment-related changes were seen for both the upper incisors (+ 1.3°) and the lower incisors (- 5.2°), only in ten patients (9.4%) was the prescribed torque value of 17° for the upper incisors and in no patient for the lower incisors achieved. A negative association between the induced change of axial angulation of incisors and the initial values was detected for the upper incisors as well as for the lower incisors. A comparison of the angle classes revealed significant differences in incisor changes. At the end of therapy, only a slight change for the upper central incisors in patients in angle class I cases and a significantly greater change in patients with angle class II/2 was observed. Cases with premolar extraction ended with lower axial angulation of the incisor than cases without extraction. The individual analysis of possible influencing factors also revealed an association with the vertical skeletal configuration., Conclusions: For the first time, the presented data show clinically relevant influencing factors for incisor axial angulation changes of the upper and lower incisors in relation to the torque value of the applied brackets in the course of routine clinical practice. For the orthodontist, it remains mandatory to decide whether a customized system must be individualized in order to achieve individual therapy goals., (© 2022. The Author(s).)

Purpose: To assess mandibular incisor inclination after leveling the curve of Spee (CoS) in patients treated with fixed appliances., Materials and Methods: This was a retrospective study, which included 80 consecutive patients with a mild CoS treated without extraction but with various biomechanical approaches. The depth of CoS was digitally measured on scanned plaster casts and mandibular incisor inclination was assessed with lateral cephalograms pre- and posttreatment. Patients were treated with 0.018"-slot edgewise fixed appliances and cinched back wires. Data were analyzed using linear regression modeling at 5%., Results: A total of 80 patients (40% female; mean age 13.8 years) were included with mean ANB = 4.4 ± 1.9°, mean SN/ML = 31.7 ± 4.7°, mean L1/ML = 95.0 ± 7.7°, and a mean depth of CoS = 1.1 ± 0.4 mm. The depth of CoS was leveled by -0.85 ± 0.39 mm to a post-treatment median of 0.18 mm (interquartile range = 0.09 to 0.35 mm). A small mandibular incisor proclination was observed through treatment (2.49 ± 9.1°), but this was not associated with the reduction in the depth of CoS (p > 0.05) and no statistically significant modifying effect from the different treatment mechanics was observed., Conclusion: Under the limitations of this study, leveling a mild CoS was not associated with mandibular incisor proclination during fixed-appliance treatment.

Objectives: Three-dimensional (3D) printing technology is a promising technique for fabricating custom orthodontic metallic appliances. Aim of this study was to assess the effect of intraoral aging on the mechanical / electrochemical properties of 3D-printed orthodontic metallic appliances., Methods: Twelve molar orthodontic distalization appliances 3D-printed from cobalt chromium (Co-Cr) alloy were retrieved after intraoral use and twenty blocks fabricated under similar conditions were used as control. The samples' microstructural / elemental composition assessment was assessed with SEM/EDS, while their mechanical properties (modulus of elasticity [E IT ], Martens hardness [HM] and the elastic index [η IT ]) were measured by instrumented indentation testing. Finally, the samples' electrochemical features were assessed with a potentiostat-connected cell arrangement in terms of open circuit potential (OCP), corrosion potential (E z ), current density (I 300 ) and breaking potential (E pit ). Results were analyzed by t-test / Mann-Whitney test (α = 0.05)., Results: The used Co-Cr alloy was found to have a highly homogenous structure with no significant differences between retrieved and new specimens in HM (4037.7 ± 215.6 vs 4090.9 ± 259.8 N/mm 2 ), E IT (120.0 ± 13.2 vs 123.8 ± 12.9 GPa), or n IT (28.4 ± 2.6 vs 28.6 ± 2.9 %) (P > 0.05 in all instances). Metallic surfaces retained the same oxidation tendency and oxide dissolution rate in passive region in both groups (P > 0.05 for OCP, E z , and I 300 ). However, intraorally-aged specimens had a significantly lower breakdown potential due to degraded protection efficacy of surface oxide (P = 0.003 for E pit )., Significance: The tested 3D-printed Co-Cr orthodontic appliances present clinically-acceptable mechanical properties that remained unaffected by intraoral ageing, which however degraded the protection of surface oxide against pitting corrosion., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: The purpose of this investigation of untreated monozygotic and dizygotic twins was to identify the genetic and environmental components to the facial soft tissue growth., Settings and Sample Population: The sample consisted of 52 untreated monozygotic twins (36 male and 16 female) and 46 untreated dizygotic twins (23 male and 23 female) from the Forsyth Moorrees Twin Study (1959-1975)., Materials and Methods: Lateral cephalograms were taken at 12 and 17 years of age and traced to analyse facial convexity, nasolabial angle, upper and lower lip thickness, upper and lower lip profile and nose prominence. The genetic and environmental components of variance were analysed with structural equation modelling for multilevel mixed-effects model., Results: At 12 years of age, strong additive genetic influence was seen for facial convexity (70%), upper lip profile (66%) and nose prominence (65%), whereas strong dominant genetic components were found for upper lip thickness (56%). Nevertheless, under unique environment influence were nasolabial angle (58%), lower lip profile (51%) and lower lip thickness (64%). At 17 years of age, only upper lip thickness (55%) and nose prominence (84%) were under strong additive genetic control, while the rest of the variables were under strong dominant genetic control. The only exception was lower lip thickness (61%), which is still influenced by the unique environment., Conclusion: Although monozygotic/dizygotic twins share at least part of their genome, at both times either additive, dominant or environmental components were found. Nevertheless, at 17 years of age most of the variables are either under additive or dominant genetic influence., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: Failure of eruption of the maxillary permanent incisor teeth usually presents in the mixed dentition between the ages of 7 and 9 years. Missing and unerupted maxillary incisors can be regarded as unattractive and have a potentially negative impact on facial and dental aesthetics. The presence of a supernumerary tooth (or odontoma) is commonly responsible for failed eruption or impaction of the permanent maxillary incisors. The primary objective of this trial is to investigate the success of eruption associated with maxillary incisor teeth that have failed to erupt because of a supernumerary tooth in the anterior maxilla., Methods: This protocol describes an interventional multicentre two-arm randomised clinical trial. Participants meeting the eligibility criteria will be randomised (unrestricted equal participant allocation [1:1]) to either space creation with an orthodontic appliance, removal of the supernumerary tooth and application of direct orthodontic traction or space creation with an orthodontic appliance, removal of the supernumerary tooth and monitoring. The primary outcome of this trial is to determine the prevalence of successfully erupted maxillary central permanent incisors at 6 months following removal of the supernumerary tooth. Secondary outcome measures include (1) the effect of initial tooth position (assessed radiographically) on time taken for the tooth to erupt, (2) time taken to align the unerupted tooth to the correct occlusal position, (3) gingival aesthetics and (4) changes in the self-reported Oral Health Related-Quality of Life (OHRQoL) (pre-and post-treatment)., Discussion: There is a lack of high-quality robust prospective studies comparing the effectiveness of interventions to manage this condition. Furthermore, the UK national clinical guidelines have highlighted a lack of definitive treatment protocols for the management of children who present with an unerupted maxillary incisor due to the presence of a supernumerary tooth. The results of this trial will inform future treatment guidelines for the management of this condition in young children., Trial Registration: ISRCTN Registry ISRCTN12709966 . Registered on 16 June 2022., (© 2022. The Author(s).)

There is an association between increased overjet and risk of trauma to the maxillary incisor teeth in children and adolescents. It would therefore seem sensible to recommend overjet reduction as early as possible to help reduce this risk. However, orthodontic outcomes are essentially the same whether you start treatment in the early or late mixed dentition, while early treatment carries a heavier burden on compliance - taking longer and involving more appointments. This article explores the complex association between early overjet reduction and dental trauma in the context of current best evidence. Careful case selection is advised when justifying early intervention for increased overjet based on reducing trauma risk., (© 2022. The Author(s).)

Introduction: Orthodontic aligners printed with in-office 3-dimensional (3D) procedures have been described, but no data on their biocompatibility exist. This study investigates the cytotoxicity and estrogenicity of a 3D-printed orthodontic aligner by assessing its biological and behavioral effects., Methods: Ten sets of 1 type of aligner were immersed in sterile deionized water for 14 days, and the cytotoxicity and estrogenicity of released factors were assessed via MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assays on human gingival fibroblasts and the estrogen-sensitive MCF-7 and the estrogen-insensitive MDA-MB-231 breast cancer cell lines. 17β-Estradiol and bisphenol-A were used as positive controls. The statistical analysis of data was performed with generalized linear models at a 0.05 level of significance., Results: No signs of cytotoxicity were seen for the aligner samples for concentrations (v/v) of 20% (P = 0.32), 10% (P = 0.79), or 5% (P = 0.76). The antioxidant activity expressed as the capacity to reduce intracellular levels of reactive oxygen species was not affected in the aligner samples (P = 0.08). No significant estrogenicity was induced by the aligner samples compared with eluents from the negative control for both MCF-7 (P = 0.65) and MDA-MB-231 (P = 0.78). As expected, 17β-Estradiol and bisphenol-A stimulated MCF-7 cell proliferation, whereas no effect was observed on MDA-MB-231 cells., Conclusions: In conclusion, if any factors were released during the 14-day aging of 3D-printed aligners in water, these were not found to be cytotoxic for human gingival fibroblasts and did not affect their intracellular reactive oxygen species levels. Moreover, no estrogenic effects of these putative eluates were observed based on an E-screen assay., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: To identify the 10 most numerically prolific authors publishing in the field of orthodontics for each year over the last decade (2011-2020), describe the characteristics of these outputs and identify trends in the types of study being published., Materials and Methods: A Scopus literature search was conducted to identify the 10 most numerically prolific publishing authors in orthodontics for each year during this decade. Number and characteristics of all publications for each author were analysed with descriptive and inferential statistics., Results: Forty-nine different individual authors were identified who were collectively prolific for between 1-8 years within the assessment decade. These authors published a total of 2025 papers, with a median annual output of 18 papers per year; however, half of these authors published between 15-24 papers per year (range 5-200). Amongst authors, 2 or more collaborated on only 7% of the identified papers. The median number of authors per paper was 5 (range 1-27) with significant variation according to study design (P < .001). The majority of authors originated from Brazil (19.3%), Italy (14.1%) and India (12.7%). Most papers described non-prospective clinical studies (38.1%), case reports or case series (11.1%) and narrative reviews (10.8%). Finally, prolific authors had a smaller annual output when publishing in orthodontic journals (P < .001) and when publishing experimental primary research (P = .04)., Conclusions: A cohort of prolific authors in orthodontics between 2011-2020 was identified. Extreme variation was found in annual output between these authors but case reports, non-prospective clinical studies and narrative reviews predominated., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: The aim of this study was to compare the mechanical properties of orthodontic aligners among different commercially available 3D printing devices., Materials and Methods: Five 3D printers (Ka:rv LP 550, Swinwon; "KAR"), (L120, Dazz 3D; "L12"), (MiiCraft 125, Miicraft Jena; "MIC"), (Slash 2, Uniz; "SLS") and (Pro 95, SprintRay; "PRO") were used to prepare orthodontic aligners with dental resin (Tera Harz TC-85DAW, Graphy). The central incisors of each aligner were cut, prepared and evaluated in terms of Martens-Hardness (HM), indentation-modulus (E IT ) and elastic-index (η IT ) as per ISO14577-1:2002. Force-indentation curves were recorded and differences among printers were checked with generalized linear regressions (alpha=5%)., Results: Statistically significant differences were seen for all mechanical properties (P < .05), which were in descending order: HM (N/mm 2 ) as median (Interquartile Range [IQR]): SLS 108.5 (106.0-112.0), L12 103.0 (102.0-107.0), KAR 101.5 (97.5-103.0), MIC 100.0 (97.5-101.5) and PRO 94.0 (93.0-96.0); E IT (MPa) as mean (Standard Deviation [SD]): SLS 2696.3 (124.7), L12 2627.8 (73.5), MIC 2566.2 (125.1), KAR 2565.0 (130.2) and PRO 2491.2 (53.3); and η IT (%) as median (IQR): SLS 32.8 (32.3-33.1), L12 31.6 (30.8-32.3), KAR 31.3 (30.9-31.9), MIC 30.5 (29.9-31.2) and PRO 29.5 (29.1-30.0). Additionally, significant differences existed between liquid crystal display (LCD) and digital light processing (DLP) printers for HM (P < .001), E IT (P = .002) and η IT (P < .001), with aligners from the former having higher values than aligners from the latter printer., Conclusion: Under the limitations of this study, it may be concluded that the mechanical properties of 3D-printed orthodontic aligners are dependent on the 3D printer used, and thus, differences in their clinical efficacy are anticipated., (© 2021 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Early orthodontic treatment in the mixed dentition aims to simplify definitive treatment in the permanent dentition. In Class III cases, this can be an effective strategy for the management of a local anterior crossbite, using either a removable or simple fixed appliance. For more significant Class III malocclusions, the decision to intervene early is a more difficult one. Traditionally, orthodontists in the UK have been reluctant to embark on early treatment in the presence of a skeletal Class III relationship but there is now some evidence that in selected cases, the use of protraction headgear can be a successful method of avoiding the need for later surgery. Although growth prediction in Class III cases is notoriously difficult, in the presence of maxillary retrognathia, the general dental practitioner should consider early referral of Class III cases to a specialist orthodontist., (© 2022. The Author(s).)

Objectives: In systematically healthy patients with an implant-supported fixed restoration (P), what is the influence of thin (E) as compared to thick (C) peri-implant soft tissues on aesthetic outcomes (O)?, Methods: Following an a priori protocol, a literature search of six databases was conducted up to August 2020 to identify prospective/retrospective clinical studies on healthy patients with an implant-supported fixed reconstruction. Measurement of the buccal soft tissue thickness and an aesthetic outcome was a prerequisite, and sites presenting with a buccal soft tissue thickness of <2 mm or shimmering of a periodontal probe were categorized as a thin phenotype. After study selection, data extraction, and risk of bias assessment, random-effects meta-analysis of Mean Differences (MD) or Odds Ratios (OR) with their corresponding 95% Confidence Intervals (CI) were conducted, followed by sensitivity analyses and assessment of the quality of evidence., Results: Thirty-four unique studies reporting on 1508 patients with 1606 sites were included (9 randomized controlled trials, one controlled trial, 10 prospective cohort studies, 8 cross-sectional studies, and 6 retrospective cohort studies). The mean difference of the pink aesthetic score (PES) after the follow-up was not significantly different between thin (<2.0 mm) or thick soft tissues (≥2.0 mm) or phenotypes (12 studies; MD = 0.15; [95% CI = -0.24, 0.53]; p = .46). PES changes during the follow-up, however, were significantly in favour of thick soft tissues (≥2.0 mm) or phenotypes (p = .05). An increased mean mucosal thickness was associated with an increased papilla index (5 studies; MD = 0.5; [95% CI = 0.1, 0.3]; p = .002) and an increase in papilla presence (5 studies; OR = 1.6; [95% CI = 1.0, 2.3]; p = .03). Thin soft tissues were associated with more recession, -0.62 mm (4 studies; [95% CI = -1.06, -0.18]; p = .006). Patient-reported outcome measures (patient satisfaction) were in favour of thick soft tissues -2.33 (6 studies; [95% CI = -4.70, 0.04]; p = .05). However, the quality of evidence was very low in all instances due to the inclusion of non-randomized studies, high risk of bias and residual confounding., Conclusion: Within the limitations of the present study (weak study designs and various soft tissue measurements or time-points), it can be concluded that increased soft tissue thickness at implant sites was associated with more favourable aesthetic outcomes., (© 2022 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Aim: To assess the beneficial and adverse effects on the dental and periodontal issues of periodontal-orthodontic treatment of teeth with pathological tooth flaring, drifting, and elongation in patients with severe periodontitis., Materials and Methods: Nine databases were searched in April 2020 for randomized/non-randomized clinical studies. After duplicate study selection, data extraction, and risk-of-bias assessment, random-effect meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression analyses., Results: A total of 30 randomized and non-randomized clinical studies including 914 patients (29.7% male; mean age 43.4 years) were identified. Orthodontic treatment of pathologically migrated teeth was associated with clinical attachment gain (-0.24 mm; seven studies), pocket probing depth reduction (-0.23 mm; seven studies), marginal bone gain (-0.36 mm; seven studies), and papilla height gain (-1.42 mm; two studies) without considerable adverse effects, while patient sex, gingival phenotype, baseline disease severity, interval between periodontal and orthodontic treatment, and orthodontic treatment duration affected the results. Greater marginal bone level gains were seen by additional circumferential fiberotomy (two studies; MD = -0.98 mm; 95% CI = -1.87 to -0.10 mm; p = .03), but the quality of evidence was low., Conclusions: Limited evidence of poor quality indicates that orthodontic treatment might be associated with small improvements of periodontal parameters, which do not seem to affect prognosis, but more research is needed., (© 2021 The Authors. Journal of Clinical Periodontology published by John Wiley & Sons Ltd.)

Aim: To assess the frequency and quantity of interproximal contact loss (ICL) between implant restorations and adjacent teeth after at least 10 years of follow-up (FU)., Methods: Thirty-nine patients (median age 57.3 years) with 80 implants were re-examined at least 10 years after insertion of final restorations (single crowns or fixed dental prostheses (FDPs)). Baseline (insertion of the restorations) and FU examinations encompassed the following: Stone casts were scanned and superimposed for metric assessment of tooth movements, radiographs, and clinical measurements. Outcome measures at implant sites were as follows: the extent of tooth movement and the frequency of interproximal contact loss [ICL], peri-implant marginal bone levels [MBLs], and clinical measurements (plaque control record [PCR], Bleeding on Probing [BOP], and probing depth [PD]). Data were analyzed statistically with generalized regression modeling with robust standard errors to account for within-patient clustering at 5%., Results: Interproximal contact loss for at least one contact point after 10 years was observed in 50% of all implants (with open interproximal spaces up to 1.64 mm). Mesial contact points were significantly more prone to ICL than distal ones (relative risk [RR] = 1.79; 95% confidence interval [CI] = 1.07-2.99; p = .03). The type of restoration had a significant effect on ICL, with FDPs of 2 implants being significantly more prone to mesial ICL than single crowns (RR = 1.52; 95% CI = 1.02-2.25; p = .04). ICL was also associated with a significant increase in PD (+0.46 mm (95% CI = 0.04-0.88 mm; p = .03)) compared to implant sites without ICL. BOP, MBLs, and PCR were not significantly influenced by ICL., Conclusion: Interproximal contact loss was a common finding in 50% of the implant sites and was significantly associated with an increase in PD., (© 2022 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)