Search

Abstract Introduction Metallic and elastomeric ligatures are widely used in orthodontics to secure the archwire within the bracket slots, but elastomeric ligatures have traditionally been associated with increased microbial colonization, which could adversely affect periodontal health. Aim This systematic review compares the periodontal effects of elastomeric and steel ligatures used for orthodontic fixed appliances. Methods Unrestricted literature search of 7 databases (MEDLINE, Scopus, Web of Science, Embase, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and Virtual Health Library) up to July 2023 were performed for randomized / non-randomized clinical studies on humans comparing the two ligation methods during fixed-appliance therapy. After duplicate study selection, data extraction, and risk-of-bias assessment with the Risk of Bias (RoB) 2 or the Risk Of Bias In Non-randomized Studies - of Interventions (ROBINS-I) tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) and their 95% confidence intervals (CIs) were carried out, followed by assessment of certainty of existing evidence with the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach. Results A total of 11 studies (3 randomized / 8 non-randomized) with 354 patients (mean age 14.7 years and 42% male) were included. No statistically significant differences were seen for plaque index (5 studies; SMD = 0.48; 95% CI = -0.03 to 1.00; P = 0.07), gingival index (2 studies; MD = 0.01; 95% CI = -0.14 to 0.16; P = 0.89), probing pocket depth (2 studies; MD = 0; 95% CI = -0.17 to 0.16; P = 0.97), or Streptococcus mutans counts (4 studies; SMD = 0.40; 95% CI=-0.41 to 1.20; P = 0.21). Elastomeric ligatures were associated with moderately increased total bacterial load (3 studies; SMD = 0.43; 95% CI = 0.10 to 0.76; P = 0.03). Confidence in these estimates was low in all instances due to the inclusion of non-randomized studies with high risk of bias. Conclusions Existing low quality evidence indicates that ligature method does not seem to influence the periodontal health during fixed treatment, even if elastomeric ligatures are associated with a moderate increase of bacterial load. Registration PROSPERO (CRD42023444383)

Abstract Background The aim of the present study was to investigate qualitatively and quantitatively the elution of substances from polyester-urethane (Invisalign™) aligners and resin composite attachments (Tetric EvoFlow) in vivo. Methods Patients (n = 11) treated with the aligners and attachments (16 per patient, without other composite restorations) for an average of 20 months, who were planned for attachment removed were enrolled in the study. Patients were instructed to rinse with 50 mL of distilled water upon entry and the rinsing solution was collected (before removal). Then, the attachments were removed with low-speed tungsten carbide burs for adhesive residue removal, a thorough water rinsing was performed immediately after the grinding process to discard grinding particle residues, and subsequently, after a second water-rinsing the solution was collected for analysis (after removal). The rinsing solutions were analyzed for targeted (LC-MS/MS: Bis-GMA, DCDMA, UDMA, BPA) and untargeted (LC-HRMS: screening of leached species and their degradation products) compounds. Results Targeted analysis revealed a significant reduction in BPA after attachment removal (4 times lower). Bis-GMA, DCDMA, UDMA were below the detection limit before removal but were all detectable after removal with Bis-GMA and UDMA at quantifiable levels. Untargeted analysis reviled the presence of mono-methacrylate transformation products of Bis-GMA (Bis-GMA-M1) and UDMA (UDMA-M1), UDMA without methacrylate moieties (UDMA-M2), and 4-(dimethylamino) benzoic acid (DMAB), the degradation product of the photo-initiator ethyl-4-(dimethylamino) benzoate (EDMAB), all after attachment removal. Several amino acids and endogenous metabolites were also found both before and after removal. Conclusions Elevated levels of BPA were traced instantaneously in patients treated with Invisalign™ and flowable resin composite attachments for the testing period. BPA was reduced after attachment removal, but residual monomers and resin degradation products were found after removal. Alternative resin formulations and attachment materials may be utilized to reduce eluents.

This review covers aspects of orthodontic materials, appliance fabrication and bonding, crossing scientific fields and presenting recent advances in science and technology. Its purpose is to familiarize the reader with developments on these issues, indicate possible future applications of such pioneering approaches, and report the current status in orthodontics. The first section of this review covers shape-memory polymer wires, several misconceptions arising from the recent introduction of novel three-dimensional (3D)-printed aligners (mistakenly termed shape-memory polymers only because they present a certain degree of rebound capacity, as most non-stiff alloys or polymers do), frictionless surfaces enabling resistance-less sliding, self-healing materials for effective handling of fractured plastic/ceramic brackets, self-cleaning materials to minimize microbial attachment or plaque build-up on orthodontic appliances, elastomers with reduced force relaxation and extended stretching capacity to address the problem of inadequate force application during wire-engagement in the bracket slot, biomimetic (non-etching mediated) adhesive attachment to surfaces based on the model of the gecko and the mussel, and command-debond adhesives as options for an atraumatic debonding. This review’s second section deals with the recent and largely unsubstantiated application of 3D-printed alloys and polymers in orthodontics and aspects of planning, material fabrication, and appliance design.

Abstract Background Failure of eruption of the maxillary permanent incisor teeth usually presents in the mixed dentition between the ages of 7 and 9 years. Missing and unerupted maxillary incisors can be regarded as unattractive and have a potentially negative impact on facial and dental aesthetics. The presence of a supernumerary tooth (or odontoma) is commonly responsible for failed eruption or impaction of the permanent maxillary incisors. The primary objective of this trial is to investigate the success of eruption associated with maxillary incisor teeth that have failed to erupt because of a supernumerary tooth in the anterior maxilla. Methods This protocol describes an interventional multicentre two-arm randomised clinical trial. Participants meeting the eligibility criteria will be randomised (unrestricted equal participant allocation [1:1]) to either space creation with an orthodontic appliance, removal of the supernumerary tooth and application of direct orthodontic traction or space creation with an orthodontic appliance, removal of the supernumerary tooth and monitoring. The primary outcome of this trial is to determine the prevalence of successfully erupted maxillary central permanent incisors at 6 months following removal of the supernumerary tooth. Secondary outcome measures include (1) the effect of initial tooth position (assessed radiographically) on time taken for the tooth to erupt, (2) time taken to align the unerupted tooth to the correct occlusal position, (3) gingival aesthetics and (4) changes in the self-reported Oral Health Related-Quality of Life (OHRQoL) (pre-and post-treatment). Discussion There is a lack of high-quality robust prospective studies comparing the effectiveness of interventions to manage this condition. Furthermore, the UK national clinical guidelines have highlighted a lack of definitive treatment protocols for the management of children who present with an unerupted maxillary incisor due to the presence of a supernumerary tooth. The results of this trial will inform future treatment guidelines for the management of this condition in young children. Trial registration ISRCTN Registry ISRCTN12709966 . Registered on 16 June 2022.

Abstract Objectives Three-dimensional (3D) printing technology is an emerging manufacturing process for many orthodontic appliances, and the aim of this study was to evaluate the mechanical properties of resin-based materials as alternatives for the in-house preparation of orthodontic brackets. Material and Methods Two types of 3D printed resins used for temporary (T) and permanent (P) crown fabrication were included in this study. Ten blocks from each resin were manufactured by a 3D printer and, after embedding them in acrylic resin, the samples were subjected to metallographic grinding and polishing, followed by instrumented indentation testing (IIT). Martens hardness (HM), indentation modulus (E IT), and elastic index (η IT) were determined with a Vickers indenter recording force-indentation depth curves from each specimen. After calculating descriptive statistics, differences between material types were investigated with Wilcoxon rank sum test accounting for clustering of measurements within specimens at alpha = 5%. Results No statistically significant differences in the mechanical properties of the two tested materials were seen: HM: median 279 N/mm2 (interquartile range [IQR] 275–287 N/mm2) for T and median 279 N/mm2 (IQR 270–285 N/mm2) for P (P value = 0.63); E IT: median 5548 MPa (IQR 5425–5834 MPa) for T and median 5644 (IQR 5420–5850 MPa) for P (P value = 0.84); η IT: median 47.1% (46.0–47.7%) for T and median 46.0% (IQR 45.4–47.8%) for P (P value = 0.24). Conclusions Under the limitations of this study, it may be concluded that the mechanical properties of the two 3D printed resins tested are equal, and thus, no differences in their clinical performance are expected.

Abstract Background Knowledge obtained at the undergraduate level regarding molar incisor hypomineralisation (MIH) has an impact on future practice of dentists and paediatric dentists. This cross-sectional study aimed to assess final-year dental students’ knowledge, attitudes and beliefs towards MIH in all Swiss universities. Methods A previously utilised survey (in both English and German) was distributed among final-year dental students in all Swiss dental schools (Basel, Bern, Geneva and Zurich). It probed students’ knowledge, attitudes and beliefs regarding the diagnosis, prevalence, aetiology, and management of MIH, and was structured in two parts: knowledge/perception and clinical application. The students’ responses were analysed statistically with descriptive statistics. Results 113 out of 133 final-year Swiss dental students took part in the study (85%). Nearly all students were familiar with MIH (99%), but only 12% of them felt confident when diagnosing MIH clinically. Direct composite fillings (66%), indirect restorations (28%) and preformed stainless-steel crowns (26%) were chosen as most suitable treatment options for MIH-affected teeth. Conclusion Final-year Swiss dental students are well informed about MIH. However, they report low level of confidence when clinically confronted with MIH-affected teeth regarding its diagnosis and treatment. Swiss Universities curricula should be revisited accordingly.

Objective: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic. Methods: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"‐slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post‐debond (T3) and analysed statistically at 5%. Results: A total of 157 patients were included (56.7% female; 11.6‐year‐old at T1), 16.6% of which were treated with premolars extractions. Non‐extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P =.04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P >.05) or the first permanent molar (0.06 mm; P >.05). No overall significant differences in absolute relapse were seen between extraction and non‐extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%‐confidence interval 0.08‐0.88; P =.003). Conclusion: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse. [ABSTRACT FROM AUTHOR]

Abstract Objectives Adults with fixed orthodontic appliances are increasing nowadays. Compared with adolescents, adults present biological differences that might influence treatment duration. Therefore, the aim of the study was to compare duration of treatment with fixed appliances between adults and adolescents. Materials and methods Eight databases were searched up to September 2019 for randomized and non-randomized clinical studies comparing treatment duration with fixed appliances in adolescents and adult patients. After duplicate study selection, data extraction, and risk of bias assessment with the Cochrane ROBINS-I tool, random effects meta-analyses of mean differences (MD) and their 95% confidence intervals (CIs) were performed, followed by assessment of the quality of evidence with GRADE. Results A total of 11 unique studies (one prospective and 10 retrospective non-randomized) with 2969 adolescents and 1380 adult patients were finally included. Meta-analysis of 7 studies found no significant difference in the duration of comprehensive treatment with fixed appliances (MD = − 0.8 month; 95% CI = − 4.2 to 2.6 months; P = 0.65; I 2 = 92%) between adults and adolescents. Similarly, both distalization of upper first molars with skeletal anchorage for class II correction and the retraction of canines into the premolar extraction spaces lasted similarly long among adults and adolescents. On the other hand, alignment of palatally displaced canines lasted considerably longer in adults compared to adolescents (1 study; MD = 3.8 months; 95% CI = 1.4 to 6.2 months; P = 0.002). The quality of evidence for the meta-analysis was low due to the inclusion of non-randomized studies with considerable risk of bias. Conclusions While existing evidence does not indicate a difference in the overall duration of treatment with fixed appliances between adults and adolescents, the alignment of palatally displaced canines lasted significantly longer in adults. However, our confidence in these estimates is low due to the risk of bias in the included studies. Trial registration PROSPERO: ( CRD42019148169 )

Abstract Background Juvenile idiopathic arthritis (JIA) can cause osseous deformity in the temporomandibular joint (TMJ) and may impair mandibular growth. This study aimed to evaluate whether facial asymmetry determined clinically or by morphometric analysis of three-dimensional (3D) photographs in JIA patients is associated with an asymmetric affection of theTMJ. Methods Of 76 consecutive JIA patients with a mean age of 11.7 years (range: 6.3–17.9), facial asymmetry was evaluated clinically (chin asymmetry, gonion asymmetry), and stereophotogrammetrically with 3D photographs. The facial surfaces were demarcated, then mirrored, superimposed using semi-automated landmarks, and quantitatively assessed (chin asymmetry, Hausdorff distances). Clinical and digital measurements were related to the diagnosis of right and left TMJ involvement derived from magnetic resonance images (MRI). Results Twenty-seven (34%) patients had an asymmetrical osseous deformity of the TMJ. By clinical evaluation, chin asymmetry was related to asymmetrical osseous destruction (p = 0.02), but gonion asymmetry was not (p = 0.14). In regard to 3D-photograph based morphometric measurements, chin asymmetry was also related to asymmetrical osseous destruction (p = 0.01), but neither the mean (p = 0.06) nor the maximal Hausdorff distance (p = 0.67). Despite the attested significance, none of the chin asymmetry evaluation methods appeared to hold sufficient predictive value (positive predictive values ≤54%; coefficient of determination ≤7%). Conclusions For the assessment of facial asymmetry in JIA patients, morphometric measurements originating from 3D-photographs seem to deliver results comparable to the clinical assessment methods. The asymmetry of the face, especially around the chin, appears to be related to asymmetrical TMJ destruction, but none of the investigated measurement methods of the face were able to reliably predict the TMJ affection. Thus, facial asymmetry assessments, both qualitatively in a clinical setting and quantitatively based on 3D-photographs, have limited diagnostic value for TMJ involvement in JIA patients.

Background Craniofacial skeletal discrepancies have been associated with upper airway dimensions. Objective To identify differences in upper airway volume across different sagittal and vertical skeletal patterns. Search methods Unrestricted literature searches in eight databases/registers for human studies until May 2023. Selection criteria Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology. Data collection and analysis Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach. Results Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total  pharyngeal airway volume, with Class II having decreased airway volume (−2256.06 mm3; 95% Confidence Interval [CI] −3201.61 to −1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (−1716.77 mm3; 95% CI −3296.42 to −137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA. Conclusions Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children–adult patients, and incomplete reporting. Clinical Trial Registration PROSPERO (CRD42022366928). [ABSTRACT FROM AUTHOR]

Abstract Background The aim of the current systematic review was to compare the radiologic effects of functional appliance Class II treatment compared to no treatment on the temporomandibular joint and its components. Methods Nine databases were searched up to June 2019 for randomized or prospective non-randomized clinical trials comparing Class II patients treated with functional appliances to untreated patients. After duplicate study selection, data extraction, and risk of bias assessment with the Cochrane tool and the ROBINS-I tool, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by the assessment of the quality of evidence with GRADE. Results A total of 11 papers on 8 unique trials with 377 patients (39.8% male; average age 10.3 years) were finally included. Limited evidence indicated that compared to untreated growing patients functional appliance treatment was associated with increased condylar width (2 studies; MD 1.1 mm; 95% CI 0.1 to 2.2 mm; very low evidence quality), decreased anterior joint space (2 studies; MD − 0.7 mm; 95% CI − 0.5 to − 0.9 mm; very low evidence quality), increased superior joint space (2 studies; MD 0.7 mm; 95% CI 0.5 to 1.0 mm; very low evidence quality), increased posterior joint space (2 studies; MD 1.0 mm; 95% CI 0.9 to 1.2 mm; very low evidence quality), and vertical displacement of the glenoid fossa (2 studies; MD 0.4 mm; 95% CI 0.1 to 0.7 mm; very low evidence quality). The main limitations affecting the validity of the present findings were the inclusion of non-randomized studies with methodological issues, imprecision due to limited samples of the included studies, and inconsistencies among studies. Conclusions Currently existing evidence from controlled clinical studies on humans indicates that functional appliance treatment is associated with positional and skeletal alterations of the temporomandibular joint in the short term compared to untreated controls. However, the clinical relevance of these changes remains unclear, while the quality of existing evidence is low due to methodological issues of existing studies. Review registration PROSPERO, CRD42018109271

Abstract Background The aim of the current systematic review was to compare the clinical effects of bone-borne or hybrid tooth-bone-borne rapid maxillary expansion (RME) with conventional tooth-borne RME in the treatment of maxillary deficiency. Methods Nine databases were searched up to September 2018 for randomized clinical trials comparing bone-borne or hybrid tooth-bone-borne RME to conventional tooth-borne RME in patients of any age or sex. After duplicate study selection, data extraction, and risk of bias assessment with the Cochrane tool, random effects meta-analyses of mean differences (MD) and their 95% confidence intervals (CIs) were performed, followed by assessment of the quality of evidence with GRADE. Results A total of 12 papers on 6 unique trials with 264 patients (42.4% male; average age 12.3 years) were finally included. Limited evidence indicated that bone-borne RME was associated with greater suture opening at the first molar post-retention (1 trial; MD 2.0 mm; 95% CI 1.4 to 2.6 mm; moderate evidence quality) compared to tooth-borne RME, while no significant differences could be found regarding tooth inclination, nasal cavity width, and root resorption (very low to low evidence quality). Hybrid tooth-bone-borne RME was associated with less buccal tipping of the first premolar (2 trials; MD − 4.0°; 95% CI − 0.9 to − 7.1°; moderate evidence quality) and lower nasal airway resistance post-retention (1 trial; MD − 0.2 Pa s/cm3; 95% CI − 0.4 to 0 Pa s/cm3; moderate evidence quality) compared to tooth-borne RME, while no significant difference could be found regarding skeletal maxillary width, molar inclination, and analgesic use (low to moderate evidence quality). The main limitations affecting the validity of the present findings were (a) imprecision due to the inclusion of few trials with limited sample sizes that precluded robust detection of existing differences and (b) methodological issues of the included trials that could lead to bias. Conclusions Limited evidence from randomized trials indicates that bone-borne or hybrid tooth-bone-borne RME might present advantages in terms of increased sutural opening, reduced tooth tipping, and lower nasal airway resistance compared to conventional tooth-borne RME. However, the limited number of existing studies and issues in their conduct or reporting preclude the drawing of definite conclusions. Review registration PROSPERO (CRD42017079107).