Search

An electrochemical allylation/alkylation of cyclic/acyclic ethers is presented via a C(sp3)–H activation, proceeding under cathodic reduction. The reaction shows broad functional group tolerance and high yields.

Irradiation with red light is able to improve yields and shorten the reaction time in enzymatic reactions. A commercially available laccase from Trametes versicolor, used in conjunction with a catalytic amount of TEMPO (20 mol%), was irradiated under red light (630 nm) for the clean oxidation of benzylic alcohols and amines in a faster reaction compared to the one conducted in the dark, affording the desired product in excellent yields (up to 99%) using air as the terminal oxidant. The observed acceleration is due to the strongest oxidation ability of laccase, in its excited state, towards TEMPO.

A regioselective vinylation of aromatic and aliphatic aldehydes promoted by the merging of photoredox and nickel catalysis is here reported. A comprehensive investigation on the reaction conditions allowed the disclosure of a valid and reproducible protocol based on a nickel-mediated reductive coupling approach under visible light irradiation. The employment of 3CzClIPN (2,4,6-tris(carbazol-9-yl)-5-chloro-isophthalonitrile) as the photocatalyst and Hantzsch's ester as the sacrificial organic reductant replace the use of boron-, silicon- or zinc-based reducing agents, making this method a worthy alternative to the already known protocols. The developed mild reaction conditions allow the access to a wide range of substituents decorating both the aldehyde and the alkyne. Moreover, careful photophysical investigations shed light on the mechanism of the reaction.

The photophysical behaviour of phosphorescent rigidification-induced emission (RIE) dyes is highly affected by their micro- and nanoenvironment. The lifetime measure of RIE dyes dispersed in polymers represents an effective approach to gain valuable information on polymer free volume and thus develop materials potentially able to self-monitor physical ageing and mechanical stresses.

Copper indium sulfide quantum dots (CIS QDs) and their core-shell analogues (CIS@ZnS QDs) were functionalized with pyrene chromophores via a dihydrolipoamide bifunctional binding moiety: UV excitation of the pyrene chromophores resulted in sensitized emission of the CIS core because of an efficient energy transfer process; the core-shell hybrid system exhibits a 50% increased brightness when excited at 345 nm.

Presented herein are two fully characterized gold tetrathiocyanocorroles representing a potentially significant new class of NIR-emissive 5d-metallocorroles. The four SCN groups on the bipyrrole unit of the corrole exert a powerful electron-withdrawing effect, upshifting both the oxidation and reduction potentials by roughly half a volt relative to their unsubstituted counterparts. That said, the upshift of the LUMO is somewhat higher than that of the HOMO so these complexes also exhibit a smaller HOMO–LUMO gap, as evinced in both electrochemical measurements and Q band energies (∼595 nm relative to ∼571 nm for their SCN-free counterparts). The new compounds exhibit NIR phosphorescence under ambient conditions with emission maxima around 900 nm (compared with 790 nm for simple Au triarylcorroles), phosphorescence quantum yields around 0.3%, phosphorescence lifetimes around 10 μs, and singlet oxygen sensitization with a quantum yield of around 50 ± 5% in solution, together signifying wide-ranging potential applications as triplet photosensitizers in oxygen sensing and photodynamic therapy.

Silicon nanocrystals (SiNCs) have attracted attention due to their unique properties that render them particularly suitable for a high variety of applications, such as electrochemiluminescence (ECL) sensors. However, the electrochemiluminescence of SiNCs has not been investigated in depth so far and the research has been focused on conventional quantum dots composed of toxic or rare materials. Here, we investigate the ECL properties of heterosupramolecular systems based on organic chromophores (diphenylanthracene, DPA) linked to the SiNC's surface. The optical properties of the nanocrystal are affected by the presence of the chromophores; their ECL behaviors are independent of each other, generating hybrid systems characterized by dual-potential electrochemiluminescence. These nanoparticles can be used as single systems with tunable dual-potential emissions; ECL signals can be varied with the type of the attached chromophore.

A suitable description of the photoluminescence dynamics in a complex system such as an ensemble of semiconductor nanocrystals can bring invaluable insight into its carrier dynamics. In this contribution, we study a system of silicon nanocrystals sensitized by light-harvesting diphenylanthracene molecules enhancing their absorption. The emission-wavelength-resolved photoluminescence decay of this system can be well-described by the Becquerel (compressed hyperbola) function, featuring a characteristic power-law-like tail. This shape of the photoluminescence decay function is linked to a model based on trapping and releasing of excited carriers, which are the cause of the longer tail. Our model allows us to estimate the value of the trap capture cross-section of σt ≈ 1.5 × 10-16 cm2.

BODIPYs are renowned fluorescent dyes with strong and tunable absorption in the visible region, high thermal and photo-stability and exceptional fluorescence quantum yields. Transition metal complexes are the most commonly used triplet photosensitisers, but, recently, the use of organic dyes has emerged as a viable and more sustainable alternative. By proper design, BODIPY dyes have been turned from highly fluorescent labels into efficient triplet photosensitizers with strong absorption in the visible region (from green to orange). In this perspective, we report three design strategies: (i) halogenation of the dye skeleton, (ii) donor–acceptor dyads and (iii) BODIPY dimers. We compare pros and cons of these approaches in terms of optical and electrochemical properties and synthetic viability. The potential applications of these systems span from energy conversion to medicine and key examples are presented., BODIPYs offer a versatile platform to build organic triplet photosensitisers for PDT, TTA upconversion and photocatalysis. Tuning their properties provides the opportunity of replacing heavy-metal complexes and can lead to improved sustainability.

The preparation of homoallylic alcohols by addition of organometallic allyl compounds to carbonyls is an important strategy in organic chemistry. Allylating organometallic cobalt species can be generated employing stoichiometric quantities of Zn acting as reductant. To avoid the employment of stoichiometric amount of Zn, we have developed an allylation reaction of aromatic and aliphatic aldehydes promoted by photoredox catalysis in the presence of a cobalt complex, and we present herein a full account of our research. In the presence of the abundant CoBr2 (10 mol %), 4,4′-di-tert-butyl-2,2′-dipyridyl (dtbbpy, 10 mol %), allyl acetate (3 equiv.), [Ir(dtbbpy)(ppy)2]PF6 (ppy=2-phenylpyridine, 2 mol %), and N,N-diisopropylethylamine (4 equiv.), an allylation of aldehydes is taking place, in moderate to good yields. Substrates scope, limitations, and photophysical investigations of this new process are reported. (Figure presented.).

High level time-dependent density functional theory (TD-DFT) computational modeling of coumarin dyes has been exploited for guiding the design of effective photocatalysts (PCs). A library of coumarins were investigated from the theoretical point of view and photophysical/electrochemical properties (absorption and emission spectra, E00, oxidation and reduction potentials) were evaluated. Comparison with literature values reported for a few candidates has been used for assessing the level of theory. On the basis of the results obtained, new strongly reducing PCs [Eox(PC.+/PC*)=−2.1 – −2.0 V vs SCE] were discovered. Through the computational study of structure-properties relationships, a number of coumarins derivatives have been synthesized and evaluated in the pinacol coupling of aldehydes as the model reaction. The new organic photoredox catalysts show experimental photophysical and electrochemical data in accordance with the ones predicted by calculation, with excited state reduction potentials surpassing those of highly reducing transition metal-based PCs. A careful investigation of their behavior as PC has revealed crucial issues that need to be taken into consideration in the general photoredox catalysis, shedding light on the use of these PC in the pinacol, as well as, in other photoredox reactions.

Tetraphenylmethane (TPM) and tetraphenylethylene (TPE) are among the most common rigid molecular architectures able to spatially arrange four peripheral functional groups. The aim of this Review is to provide a thorough description of the properties that supramolecular systems consisting of four chromophores (common supramolecular motifs, ligands, redox centers and conventional luminophores such as polypyridyl ligands, viologens, and azobenzene units) attached to TPM and TPE cores can show. Specifically, the photophysical properties of these molecules as well as the electronic interactions of the chromophores either in the ground or in the excited states will be highlighted and discussed, outlining the relationship among cores and outer subunits.

Fair and meaningful device per- formance comparison among luminescent solar concentrator- photovoltaic (LSC-PV) reports cannot be realized without a gen- eral consensus on reporting stan- dards in LSC-PV research. There- fore, it is imperative to adopt standardized characterization protocols for these emerging types of PV devices that are consistent with other PV devices. This commentary highlights several common limitations in LSC literature and summarizes the best practices moving for- ward to harmonize with standard PV reporting, considering the greater nuances present with LSC-PV. Based on these prac- tices, a checklist of actionable items is provided to help stan- dardize the characterization/re- porting protocols and offer a set of baseline expectations for au- thors, reviewers, and editors. The general consensus combined with the checklist will ultimately guide LSC-PV research towards reliable and meaningful ad- vances.

The stability of a photocatalyst under irradiation is important in photoredox applications. In this work, we investigated the stability of a thermally activated delayed fluorescence (TADF) photocatalyst {3DPAFIPN [2,4,6-tris(diphenylamino)-5-fluoroisophthalonitrile]}, recently employed in photoredox-mediated processes, discovering that in the absence of quenchers the chromophore is unstable and is efficiently converted by irradiation with visible light into another species based on the carbazole-1,3-dicarbonitrile moiety. The new species obtained is itself a TADF emitter and finds useful applications in photoredox transformations. At the excited state, it is a strong reductant and was efficiently applied to cobalt-mediated allylation of aldehydes, whereas other TADFs (4CzIPN and 3DPAFIPN) failed to promote efficient photocatalytic cycles.

Here we report a practical, highly enantioselective photoredox allylation of aldehydes mediated by chiral nickel complexes with commercially available allyl acetate as the allylating agent. The methodology allows the clean stereoselective allylation of aldehydes in good to excellent yields and up to 93 % e.e. using a catalytic amount of NiCl2(glyme) in the presence of the chiral aminoindanol-derived bis(oxazoline) as the chiral ligand. The photoredox system is constituted by the organic dye 3DPAFIPN and a Hantzsch's ester as the sacrificial reductant. The reaction proceeds under visible-light irradiation (blue LEDs, 456 nm) at 8–12 °C. Compared to other published procedures, no metal reductants (such as Zn or Mn), additives (e.g. CuI) or air-sensitive Ni(COD)2 are necessary for this reaction. Accurate DFT calculations and photophysical experiments have clarified the mechanistic picture of this stereoselective allylation reaction.

Russell E. Morris, Maarit Karppinen and Paola Ceroni introduce the Dalton Transactions themed issue “New Talent: Europe 2022”.

The pinacol coupling reaction, a reductive coupling of carbonyl compounds that proceeds through the formation of ketyl radicals in the presence of an electron donor, affords the corresponding 1,2-diols in one single step. The photoredox version of this transformation has been accomplished using different organic dyes or photoactive metal complexes in the presence of sacrificial donors such as tertiary amines or Hantzsch's ester. Normally, the homo-coupling of such reactive ketyl radicals is neither diastereo- nor enantio-selective. Herein, we report a highly diastereoselective pinacol coupling reaction of aromatic aldehydes promoted by 5 mol% of the non-toxic, inexpensive and available Cp2TiCl2 complex. The key feature that allows the complete control of diastereoselectivity is the employment of a red-absorbing organic dye in the presence of a redox-active titanium complex. Taking advantage of the well-tailored photoredox potential of this organic dye, the selective reduction of Ti(IV) to Ti(III) is achieved. These conditions enable the formation of the D,L (syn) diastereoisomer as the favored product of the pinacol coupling (d.r. > 20 : 1 in most of the cases). Moreover, employing a simply prepared chiral SalenTi complex, the new photoredox reaction gave a complete diastereoselection for the D,L diastereoisomer, and high enantiocontrol (up to 92% of enantiomeric excess).

The synthesis of regioisomeric asterisks (5) and (6) incorporating a benzene core with six 1-naphthylthio or six 2-naphthylthio arms are reported in search for new materials with optoelectronic properties. The consequences on the extension of a pi system surrounding a persulfurated benzene core provide a new avenue to study the structural, photophysical, and chemical properties of such family of all-organic phosphors. It also diverts the persulfuration mechanism after two radical cyclizations for making a [5]dithiohelicene by-product (7) and favors dynamic sulfur component exchange reactions surrounding the core. These exchanges convert asterisks (5) and (6), non-phosphorescent at 20 degrees C to the highly phosphorescent (4) (phi similar to 100 %, solid state at 20 degrees C). For asterisks (5) and (6), the absence of the typical phosphorescence of the per(phenylthio)benzene core in the solid state at 20 degrees C and the presence of a weak naphthalene-based phosphorescence at 77 K is attributed to an energy transfer from the triplet state of the persulfurated benzene core to the outer naphthalene moieties, resulting in an antenna system.

Pyrene-based materials have gained considerable attention as stimuli-responsive chemical sensors. We designed a polysulfurated arene system based on a tetra(phenylthio)pyrene core decorated with four carboxylic acid units. Three different regioisomers, ortho, meta and para were studied in organic and aqueous solution. These systems are soluble in water at pH≥8 due to the deprotonation of carboxylic acids. The addition of metal ions cannot only quench the fluorescence of the central pyrene core, but also control the formation of three-dimensional nanoscopic objects in a dual mode function. Several divalent metal ions were tested and compared. Addition of ethylenediaminetetraacetic acid (EDTA) disassembles the non-emissive supramolecular system and restores the initial fluorescence of the pyrene core.

When functionalised with amines, silicon nanocrystals (SiNCs) are known to have surface-state emission with loss of colour tunability, low quantum yield and short nanosecond lifetimes. These changes in optical properties are produced by direct amine bonding on the silicon surface. In this article, secondary amine functionalised SiNCs with bright, red (λmax = 750 nm) and long-lived emission (τ ca. 50 μs) are reported for the first time via a three-step synthetic approach. These SiNCs are colloidally stable in several polar solvents and can be further functionalised by reaction with carboxylic acid groups. We proved the feasibility of further functionalization with pyrene butyric acid: ca. 40 pyrene units per nanoparticle were attached via amide bond formation. The resulting hybrid system works as a light-harvesting antenna: excitation of pyrene units at 345 nm results in sensitised emission at 700 nm by the silicon core. This journal is

Luminescent probes based on silicon nanocrystals (SiNCs) have many advantages for bioimaging compared to more conventional quantum dots: abundancy of silicon combined with its biocompatibility; tunability of the emission color of SiNCs in the red and NIR spectral region to gain deeper tissue penetration; long emission lifetimes of SiNCs (hundreds of μs) enabling time-gated acquisitions to avoid background noise caused by tissue autofluorescence and scattered excitation light. Here we report a new three-step synthesis, based on a low temperature thiol-ene click reaction that can afford SiNCs, colloidally stable in water, with preserved bright red and NIR photoluminescence (band maxima at 735 and 945 nm for nanocrystals with diameters of 4 and 5 nm, respectively) and long emission lifetimes. Their luminescence is insensitive to dioxygen and sensitive to pH changes in the physiological range, enabling pH sensing. In vivo studies demonstrated tumor accumulation, 48 hours clearance and a 3-fold improvement of the signal-to-noise ratio compared to steady-state imaging.

Consumption and abuse of drugs is a general problem, which concerns our entire society. In some cases, drugs are used for recreational purposes; but in others, they are used to commit crimes such as Drug-Facilitated Sexual Assault (DFSA). In other cases, this consumption alters the consumer mood in such a way that risky situations can rise. In any case, detection of drugs in different environment is worthwhile. Here, two new chromogenic and fluorescent probes are reported. Detection of both cathinone derivatives and γ-hydroxybutyric acid (GHB) can be carried out with naked-eye with limits of detection of 0.4 μM and 0.3 μM for GHB and 2.0 μM for ephedrone. Selectivity in the presence of other drugs has been tested. Sensing mechanisms have been studied using different spectroscopic techniques and they have been also corroborated through theoretical calculations.

Confinement of multiple azobenzene chromophores covalently linked at the surface of luminescent silicon nanocrystals preserves the photoswitching behavior and modulates the nanocrystal polarity. Concomitantly, the thermal Z → E isomerization is strongly accelerated and the nanocrystal luminescence is reduced by an energy transfer process resulting in photosensitized E → Z isomerization.

Tetraphenylmethane appended with four pyridylpyridinium units works as a scaffold to self-assemble four ruthenium porphyrins in a tetrahedral shape-persistent giant architecture. The resulting supramolecular structure has been characterised in the solid state by X-ray single crystal analysis and in solution by various techniques. Multinuclear NMR spectroscopy confirms the 1 : 4 stoichiometry with the formation of a highly symmetric structure. The self-assembly process can be monitored by changes of the redox potentials, as well as by modifications in the visible absorption spectrum of the ruthenium porphyrin and by a complete quenching of both the bright fluorescence of the tetracationic scaffold and the weak phosphorescence of the ruthenium porphyrin. An ultrafast photoinduced electron transfer is responsible for this quenching process. The lifetime of the resulting charge separated state (800 ps) is about four times longer in the giant supramolecular structure compared to the model 1 : 1 complex formed by the ruthenium porphyrin and a single pyridylpyridinium unit. Electron delocalization over the tetrameric pyridinium structure is likely to be responsible for this effect.

The one-photon (1P) and two-photon (2P) absorption properties of three quadrupolar dyes, featuring thiophene as a donor and acceptors of varying strengths, are determined by a combination of experimental and computational methods employing the density functional theory (DFT). The emission shifts in different solvents are well reproduced by time-dependent DFT calculations with the linear response and state specific approaches in the framework of the polarizable continuum model. The calculations show that the energies of both 1P- and 2P-active states decrease with an increase of the strength of the acceptor. The 2P absorption cross-sections predicted by the response theory are accounted for by considering just one intermediate state (S1) in the sum-over-states formulation. For the chromophore featuring the stronger acceptor, the energetic positions of the 1P- and 2P-active states prevent the exploitation of the theoretically predicted very high 2P activity due to the competing 1P absorption into the S1 state.

One of the most detrimental loss mechanisms in Luminescent Solar Concentrators (LSCs) is reabsorption of emitted light from the luminophore. Silicon Nanocrystals (SiNCs) offer a solution due to the high apparent Stokes shift, but the poor absorption properties limit their performance as LSC luminophores. Coupling an organic dye to SiNCs represents a smart approach to obtain sensitization of SiNC luminescence by the organic dyes, thus, resulting in tunable and improved optical properties of LSCs. In particular, 9,10-diphenylanthracene was employed as a UV sensitizer for SiNCs in order to produce LSCs with an aesthetic appearance suitable to smart window application and optical efficiency as high as 4.25%. In addition, the role of the energy transfer process on LSC performance was elucidated by a thorough optical and photovoltaic characterization.

Bright and nontoxic quantum dots (QDs) are highly desirable in a variety of applications, from solid-state devices to luminescent probes in assays. However, the processability of these species is often curbed by their surface chemistry, which limits their dispersibility in selected solvents. This renders a surface modification step often mandatory to make the QDs compatible with the solvent of interest. Here, we present a new synthetic approach to produce CuInS2 QDs compatible with organic polar solvents and readily usable for the preparation of composite materials. 3-Mercaptopropyl trimethoxysilane (MPTS) was used simultaneously as solvent, sulfur source, and capping agent for the QD synthesis. The synthesized QDs possessed a maximum photoluminescence quantum yield around 6%, reaching approximately 55% after growing a ZnS shell. The partial condensation of MPTS molecules on the surface of QDs was probed by solid-state nuclear magnetic resonance, whose results were used to interpret the interaction of the QDs with different solvents. To prove the versatility of the developed QDs, imparted by the thiolated silane molecules, we prepared via straightforward procedures two nanocomposites of practical interest: (i) silica nanoparticles decorated with QDs and (ii) an inexpensive polymeric film with embedded QDs. We further demonstrate the potential of this composite film as a luminescence thermometer operational over a broad temperature interval, with relative thermal sensitivity above 1% K-1 in the range of biological interest. ©

Here we report the application of dual nickel/photoredox catalysis to the allylation of aliphatic, aromatic and heteroaromatic aldehydes by using commercially available reagents. The process utilizes the combination of a Ni(ii) complex, [Ru(bpy)3]2+ as a photoredox catalyst, and allylacetate under blue LED irradiation, and allows the synthesis of a large variety of homoallylic alcohols.

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques. Experimental observations show that the Rh-based photocatalyst produces excellent yield and enantioselectivity whereas the Ir-photocatalyst yields racemates. Two different mechanistic features were found to compete with each other, namely the direct photoactivation of the catalyst–substrate complex and outer-sphere triplet energy transfer. Our integrated analysis suggests that the direct photocatalysis is the inner working of the Rh-catalyzed reaction, whereas the Ir catalyst serves as a triplet sensitizer that activates cycloaddition via an outer-sphere triplet excited state energy transfer mechanism., The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques.

A new platinum(II) porphyrin complex has been synthesized and characterized via various spectroscopic techniques. Single-crystal XRD analysis reveals that the geometry around the Pt(II) center is near the perfect square planar geometry. The Pt(II)−N bond distances are in the ranges of 2.005 Å–2.020 Å. The platinum(II) porphyrin derivative exhibited one reversible oxidative couple at +1.10 V and a reversible reductive couple at −1.47 V versus Ag/AgCl. In deaerated dichloromethane solution at 298 K, a strong phosphorescence is observed at 660 nm, with emission quantum yield of 35 % and lifetime of 75 μs. Upon excitation of the acenaphthene chromophores at 300 nm, sensitised phosphorescence of the Pt(II) porphyrin is observed with a unitary efficient energy transfer, demonstrating that this system behaves as a light harvesting antenna. The red phosphorescence is strongly quenched by oxygen, resulting in singlet oxygen production with a very high quantum yield of 88 %. This result indicates that this Pt(II) porphyrin is an excellent photosensitizer for the production of singlet oxygen and will have potential applications in the field of photodynamic therapy as well as oxygen sensors.

The use of organic dyes to promote organic reactions by photoredox catalysis is continuously expanding and was recently reviewed by Nicewicz. The synthesis of new dyes, their application in flow photoredox reactions, and their use in stereoselective and multicomponent transformations have considerably expanded the repertoire of application of organic dyes in photoredox mediated reactions. The low costs of these dyes, their tailored synthesis and availability in combination with the development of new concepts and careful catalytic cycle design (made possible by the application of fine theoretical investigations and deep understanding) are guiding the widespread application of organic dyes in the metallaphotoredox catalysis area. Developments and recent applications of different metal catalyzed processes mediated by organic dyes are covered by this review. This journal is

Copper indium sulfide (CIS) quantum dots are ideal for bioimaging applications, by being characterized by high molar absorption coefficients throughout the entire visible spectrum, high photoluminescence quantum yield, high tolerance to the presence of lattice defects, emission tunability from the red to the near-infrared spectral region by changing their dimensions and composition, and long lifetimes (hundreds of nanoseconds) enabling time-gated detection to increase signal-to-noise ratio. The present review collects: (i) the most common procedures used to synthesize stable CIS QDs and the possible strategies to enhance their colloidal stability in aqueous environment, a property needed for bioimaging applications; (ii) their photophysical properties and parameters that affect the energy and brightness of their photoluminescence; (iii) toxicity and bioimaging applications of CIS QDs, including tumor targeting, time-gated detection and multimodal imaging, as well as theranostics. Future perspectives are analyzed in view of advantages and potential limitations of CIS QDs compared to most traditional QDs.

Discussion on the synthesis of nanostructures

This Faraday Discussion volume is unique in the hundred plus year history of the Faraday Discussion series, being produced at a time of unprecedented circumstances worldwide and without the preceding Faraday Discussion conference having taken place.

Silicon nanoparticles as luminescent sensors

Room temperature phosphorescence by metal-free chromophores is quite a rare phenomenon. Hexasulfurated benzene-cored molecules with phenyl substituents, hereafter named asterisks, display bright green phosphorescence in the solid state at room temperature, while they are not luminescent in solution, because of fast non-radiative decay of the lowest excited state. Some of these asterisks are also among the most phosphorescent compounds. Following a search for structure-property relationships, we report here the synthesis, characterization, crystal structure and optical properties of three pentasulfurated benzene-cored asterisks, carrying at the sixth position of the benzene core a cyano (A5CN), a carboxaldehyde (A5CHO), or a vinyl group (A5CC). The most luminescent compound is A5CN displaying an intense orange phosphorescence in the solid state: our actual aim is to try and correlate the optical properties together with the crystal structure in this series of compounds.

Metallosalen are privileged complexes that have found important applications in catalysis. In addition, their luminescent properties have also been studied and used for sensing and biological applications. Salen metal complexes can be efficient photosensitizers, but they can also participate to electron transfer processes. Indeed, we have found that commercially available [Al(Salen)Cl] is an efficient photoredox catalyst for the synergistic stereoselective reaction of alkyl aldehydes with different bromo ketones and malonates to give the corresponding enantioenriched α-alkylated derivatives. The reaction was performed in the presence of a MacMillan catalyst. [Al(Salen)Cl] is able to replace ruthenium complexes, showing that also aluminum complexes can be used in promoting photoredox catalytic reactions.