Search

A comprehensive approach for simulating lasing dynamics in a liquid crystal based laser is presented. The approach takes into account the transformation of the liquid crystal structure caused by applied voltage. In particular, it allows us to explicitly account for a resonant mode frequency shift in the laser equations. The laser dynamic is described by a set of coupled non-linear differential equations for dye polarizations, population densities and the electromagnetic fields. The proposed model is applied to a photonic crystal$-$metal microcavity filled with a resonant nematic liquid crystal layer doped with a dye. The calculated lasing spectra governed by external electric field are verified in comparison with measured spectra.

A photonic crystal microcavity with the liquid crystal resonant layer tunable by heating has been implemented. The multiple vanishing resonant lines corresponding to optical bound states in the continuum are observed. The abrupt behaviour of the resonant linewidth near the vanishing point can be used for temperature sensing.

The microcavity in the form of a liquid crystal defect layer embedded in a one-dimensional photonic crystal is considered. The microcavity mode has a tunable radiation decay rate in the vicinity of a bound state in the continuum. It is demonstrated that coupling between the microcavity mode and a Tamm plasmon polariton results in hybrid Tamm-microcavity modes with a tunable Q factor. The measured spectral features of hybrid modes are explained in the framework of the temporal coupled mode theory.

We consider light absorption in a germanium grating placed on top of photonic-crystalline substrate. Such a system supports an optical Tamm state decoupled from the continuous spectrum with its frequency within the photonic band gap. We have demonstrated that application of the Tamm state makes in possible to engineer extremely narrow absorber which provides a 100% absorption in a semiconductor grating in the critical coupling regime. The proposed design may be used at both normal and oblique incidence at the telecom wavelength.

An anisotropic photonic crystal containing two anisotropic defect layers is considered. It is demonstrated that the system under can support a Fabry-Perot bound state in the continuum (FP-BIC). A fully analytic solution of the scattering problem as well as a condition for FP-BIC have been derived in the framework of the temporal coupled-mode theory.

We consider bound states in the continuum (BICs) in a 1D multilayered system of an anisotropic defect layer embedded into an anisotropic photonic crystal. We analytically demonstrate that an anisotropic defect layer embedded into anisotropic photonic crystal supports accidental BICs. These BICs can be transformed to a high-Q resonances by variation of one of the system's parameters. At the same time the BICs are remarkably robust in a sense that a true BIC can be recovered by further tuning any of the other system's parameters leading to tunability of the resonance position., Comment: arXiv admin note: text overlap with arXiv:2003.09079

We investigate optical Tamm states supported by a dielectric grating placed on top of a distributed Bragg reflector. It is found that under certain conditions the Tamm state may become a bound state in the continuum. The bound state, in its turn, induces the effect of critical coupling with reflectance amplitude reaching an exact zero. We demonstrate that the critical coupling point is located in the core of a vortex of the reflection amplitude gradient in space of wavelength and angle of incidence. The emergence of the vortex is explained by the coupled mode theory.

Bound states in the continuum (BICs) have attracted much attention in recent years due to the infinite quality factor (Q-factor) resonance and extremely localized field. In this study, BICs have been demonstrated by dielectric metasurfaces with hybrid surface lattice resonance (SLR) in the experiment. By breaking the symmetry of geometry, SLR can be easily switched between BICs and quasi-BICs. Comparing with literature, switching between BICs and quasi-BICs is usually accompanied by wavelength shift. Here, a design rule is proposed to prevent the wavelength shift when the Q-factor is changing. Also, such a design also makes subsequent identification of the laser threshold more credible. Due to the high Q-factor, low threshold laser is one of the intuitive applications of BICs. Utilize the high localized ability of BICs, low threshold BICs laser can be achieved by the dielectric metasurface immersed with Rhodamine 6G. Interestingly, due to the high Q-factor resonance of BICs, the laser signals and images can be observed in almost transparent samples. Not only the BICs laser is demonstrated in the experiment, but also the mechanism of BICs is deeply analyzed. This study can help readers better understand this novel feature of BICs, and provide the way for engineer BICs metasurfaces. The device can provide various applications, including laser, optical sensing, non-linear optics enhancement, and single-photon source., Comment: 18 pages, 4 figures

We consider light scattering by an anisotropic defect layer embedded into anisotropic photonic crystal in the spectral vicinity of an optical bound state in the continuum (BIC). Using a resonant state expansion method we derive an analytic solution for reflection and transmission amplitudes. The analytic solution is constructed via a perturbative approach with the BIC as the zeroth order approximation. The solution is found to describe the collapsing Fano feature in the spectral vicinity of the BIC. The findings are confirmed via comparison against direct numerical simulations with the Berreman transfer matrix method.

Spectral peculiarities of the structure consisting of a photonic crystal coated with a nanocomposite have been investigated. The nanocomposite used contains spheroidal nanoparticles with a dielectric core and a metallic shell, which are uniformly dispersed in a transparent matrix. The spectral manifestation of the observed Tamm plasmon polariton and Fabry--Perot mode has been examined. A significant polarization sensitivity of the spectra upon variation in the nanoparticle shape has been demonstrated. The dispersion curves presented for the Tamm plasmon polariton and Fabry--Perot mode are shown to be in good agreement with the spectra obtained by the transfer matrix method.

Spectral manifestations of hybrid Tamm-microcavity modes in a 1D photonic crystal bounded with a silver layer and containing a nematic liquid crystal layer working as a microcavity have been studied using numerical simulation. It is demonstrated that the hybrid modes can be effectively tuned owing to the high sensitivity of the liquid crystal to the temperature and external electric field variations. It is established that the effect of temperature on the transmission spectrum of the investigated structure is most pronounced at the point of the phase transition of the liquid crystal to the isotropic state, where the refractive index jump is observed.

The chiral optical Tamm state (COTS) is a special localized state at the interface of a handedness-preserving mirror and a structurally chiral medium such as a cholesteric liquid crystal or a chiral sculptured thin film. The spectral behavior of COTS, observed as reflection resonances, is described by the temporal coupled-mode theory. Mode coupling is different for two circular light polarizations because COTS has a helix structure replicating that of the cholesteric. The mode coupling for co-handed circularly polarized light exponentially attenuates with the cholesteric layer thickness since the COTS frequency falls into the stop band. Cross-handed circularly polarized light freely goes through the cholesteric layer and can excite COTS when reflected from the handedness-preserving mirror. The coupling in this case is proportional to anisotropy of the cholesteric and theoretically it is only anisotropy of magnetic permittivity that can ultimately cancel this coupling. These two couplings being equal results in a polarization crossover (the Kopp--Genack effect) for which a linear polarization is optimal to excite COTS. The corresponding cholesteric thickness and scattering matrix for COTS are generally described by simple expressions., Comment: the text is available both in English and in Russian, reported at ACLC-2017 (http://aclc2017.conf.tw/)