Search

A robust, specific and fully validated LC-MS/MS method as per general practices of industry has been developed for estimation of lacidipine (LAC) with 100 μL of human plasma using lacidipine-13C8 as an internal standard (IS). The API-4000 LC-MS/MS was operated under the multiple reaction-monitoring mode. A simple liquid–liquid extraction process was used to extract LAC and IS from human plasma. The total run time was 3.0 min and the elution of LAC and IS occurred at 1.96 and 1.97 min; this was achieved with a mobile phase consisting of 5 mm ammonium acetate buffer–acetontrile (15:85 v/v) at a flow rate of 0.60 mL/min on a Zorbax SB C18 (50 × 4.6 mm, 5 µm) column. A linear response function was established for the range of concentrations 50–15,000 pg/mL (r > 0.998) for LAC. The current developed method has negligible matrix effect and is free from unwanted adducts and clusters which are formed owing to system such as solvent or mobile phase. The developed assay method was applied to an oral pharmacokinetic study in humans and successfully characterized the pharmacokinetic data up to 72 h. Copyright © 2013 John Wiley & Sons, Ltd.

Background: ATACAND HCT® (candesartan cilexetil-hydrochlorothiazide [CAN–HCTZ]) combines an angiotensin II receptor (type AT1) antagonist and a diuretic. Quantification of CAN and HCTZ in biological matrices has traditionally been difficult – developing a single method with the desired sensitivity has been the issue. Results: A high-throughput bioanalytical method for the analysis of CAN and HCTZ in human plasma using liquid–liquid extraction and LC coupled to negative ion mode MS/MS has been developed and validated according to US FDA guidelines. The method uses 100 µl plasma and covers the calibration range 1–160 ng/ml for CAN and 2–160 ng/ml for HCTZ for routine pharmacokinetic studies in humans. The intra- and inter-day precision values for CAN and HCTZ met the acceptance criteria. CAN and HCTZ were stable in a battery of stability studies (benchtop, autosampler and long-term). Conclusion: The advantages of the described technique included a single method with a shorter run time (2.5 min), simple extraction technique, LLOQ of 1 ng/ml for CAN and 2 ng/ml for HCTZ and lower sample volume (0.10 ml), which overcomes drawbacks of two single methods for each analyte, such as higher analysis time, LOQ and sample volume, as in previously published methods. The developed assay was applied to an oral pharmacokinetic study in humans.

A highly sensitive, rapid assay method has been developed and validated for the simultaneous estimation of tolmetin (TMT) and MED5 in human plasma with liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the positive-ion mode. A simple solid-phase extraction process was used to extract TMT and MED5 along with mycophenolic acid (internal standard, IS) from human plasma. Chromatographic separation was achieved with 0.2% formic acid–acetonitrile (25:75, v/v) at a flow rate of 0.50 mL/min on an X-Terra RP18 column with a total run time of 2.5 min. The MS/MS ion transitions monitored were 258.1 119.0 for TMT, 315.1 119.0 for MED5 and 321.2 207.0 for IS. Method validation and clinical sample analysis were performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 20 ng/mL and the linearity was observed from 20 to 2000 ng/mL, for both the anlaytes. The intra-day and inter-day precisions were in the range 3.27–4.50 and 5.32–8.18%, respectively for TMT and 4.27–5.68 and 5.32–8.85%, respectively for MED5. This novel method has been applied to a clinical pharmacokinetic study. Copyright © 2010 John Wiley & Sons, Ltd.

A highly sensitive, specific and evaporation free SPE extraction, LC–MS/MS method has been developed for the estimation of trospium in human plasma using trospium-d8 as an internal standard (IS). The analyte was separated using isocratic mobile phase on reverse phase column and analyzed by MS/MS in the multiple reaction monitoring mode using the respective [M+] cations, m/z 392–164 for trospium and m/z 400–172 for the IS. The total run time was 3.50 min and the elution of trospium and trospium-d8 (IS) occurred at 2.8 min. The developed method was validated in human plasma with a lower limit of quantification of 0.05 ng/mL. A linear response function was established for the range of concentrations 0.05–10 ng/mL (r > 0.998) for trospium in human plasma. The intra- and inter-day precision values for trospium met the acceptance as per FDA guidelines. Trospium was stable in the battery of stability studies viz., bench-top, auto-sampler, dry extracts and freeze/thaw cycles. The developed assay method was applied to an oral pharmacokinetic study in humans.

A highly selective, sensitive and accurate HPLC method has been developed and validated for the estimation of four proton-pump inhibitors (PPI), lansoprazole (LPZ), omeprazole (OPZ), pantoprazole (PPZ) and rabeprazole (RPZ), with 500 microL human plasma using zonisamide as an internal standard (IS). The sample preparation involved simple liquid-liquid extraction of LPZ, OPZ, PPZ and RPZ and IS from human plasma with ethyl acetate. The baseline separation of all the peaks was achieved with 0.1% triethylamine (pH 6.0):acetonitrile (72:28, v/v) at a flow rate of 1 mL/min on a Zorbax C(8) column. The total chromatographic run time was 11.0 min and the simultaneous elution of IS, OPZ, RPZ, PPZ and LPZ occurred at approximately 2.42, 4.45, 5.02 and 9.37 min, respectively. The method was proved to be accurate and precise at linearity range of 20.61-1999.79 ng/mL with a correlation coefficient (r) of >or=0.999. The limit of quantitation for each of the PPI studied was 20.61 ng/mL. The intra- and inter-day precision and accuracy values were found to be within the assay variability limits as per the FDA guidelines. The developed assay method was applied to a pharmacokinetic study in human volunteers.