Search

Your search keyword '"Panizza, Matteo"' showing total 49 results
Start Over Author "Panizza, Matteo"
49 results on '"Panizza, Matteo"'

1. Thermography for assessing the thermal performance of innovative geopolymeric radiant panels.

Author

Ferrarini, Giovanni, Bison, Paolo, Bortolin, Alessandro, Cadelano, Gianluca, Garbin, Enrico, Natali, Marco, Panizza, Matteo, Peron, Fabio, Bernardi, Adriana, and Tamburini, Sergio

Abstract

One of the last scientific activities of Ermanno Grinzato was the research on radiant heating and cooling systems. In addition to providing a novel view for thermal and thermographic testing of these systems, he had foreseen the importance of using efficient and sustainable materials. Firstly, this work introduces the issue of testing radiant heating and cooling systems and the arising interest in geopolymers. Afterwards, the synergy between these two research fields is highlighted by the realisation and testing of a novel geopolymeric panel. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

13. Round Robin Test for composite-to-brick shear bond characterization

Author

Valluzzi, Maria Rosa, Oliveira, Daniel V., Caratelli, Angelo, Castori, Giulio, Corradi, Marco, de Felice, Gianmarco, Garbin, Enrico, Garcia, David, Garmendia, Leire, Grande, Ernesto, Ianniruberto, Ugo, Kwiecień, Arkadiusz, Leone, Marianovella, Lignola, Gian Piero, Lourenço, Paulo B., Malena, Marialaura, Micelli, Francesco, Panizza, Matteo, Papanicolaou, Catherine G., Prota, Andrea, Sacco, Elio, Triantafillou, Thanasis C., Viskovic, Alberto, Zając, Bogusław, and Zuccarino, Gina

Published
2012
Full Text
View/download PDF

14. InnoWEE - Manual de formación

Author

Bernardi, Adriana, Cadelano, Gianluca, Tamburini, Sergio, Natali, Marco, Panizza, Matteo, Bison, Paolo, Ferrarini, Giovanni, Sachini, Maria, Tsoutis, Constantinos, Mazzasalma, Giulia, Pockelé, Luc, Romero Amorrortu, Ander, Fraga De Cal, Beatriz, Garrido Marijuan, Antonio, Arregi Goikolea, Beñat, Ceschel, Giulia, Bordignon, Mirco, Magaton, Tomas, Rossi, Leonardo, Fodor, Loredana, Tanase, Alexandru, Lezak, Emil, Pluta, Jakub, Ducman, Vilma, Knez, Friderik, Dolenec, Sabina, Frankovič, Ana, Knez, Nataša, Lešek, Anja, Kvočka, Davor, Robič, Sebastjan, Šajna, Aljoša, Casati, Anna, Signorini, Sergio, Sonzogni, Francesco, Apostolopoulos, Dimitris, and Demetriou, Evangelos

Subjects
InnoWEE, H2020, paneles geopoliméricos, residuos de construcción y demolición, manual de formación
Abstract

Este documento presenta la estructura y los resultados del proyecto InnoWEE (Programa de I+D+i Horizonte 2020, Convocatoria EeB-04-2016, Acuerdo de Subvención No 723916), y ofrece una visión general de sus principales fases y logros.

Published
2020
Full Text
View/download PDF

15. InnoWEE - Priročnik za usposabljanje

Author

Bernardi, Adriana, Cadelano, Gianluca, Tamburini, Sergio, Natali, Marco, Panizza, Matteo, Bison, Paolo, Ferrarini, Giovanni, Sachini, Maria, Tsoutis, Constantinos, Mazzasalma, Giulia, Pockelé, Luc, Romero Amorrortu, Ander, Fraga De Cal, Beatriz, Garrido Marijuan, Antonio, Arregi Goikolea, Beñat, Ceschel, Giulia, Bordignon, Mirco, Magaton, Tomas, Rossi, Leonardo, Fodor, Loredana, Tanase, Alexandru, Lezak, Emil, Pluta, Jakub, Ducman, Vilma, Knez, Friderik, Dolenec, Sabina, Frankovič, Ana, Knez, Nataša, Lešek, Anja, Kvočka, Davor, Robič, Sebastjan, Šajna, Aljoša, Casati, Anna, Signorini, Sergio, Sonzogni, Francesco, Apostolopoulos, Dimitris, and Demetriou, Evangelos

Subjects
priročnik za usposabljanje, gradbeni odpadki in odpadki pri rušenju, InnoWEE, H2020, geopolimerne plošče
Abstract

Ta dokument predstavlja strukturo in rezultate projekta InnoWEE (Program R&I Obzorje 2020, razpis EeB-04-2016, pogodba o donaciji št. 723916) in podaja pregled njegovih glavnih faz in dosežkov.

Published
2020
Full Text
View/download PDF

16. InnoWEE - Εγχειρίδιο εκπαίδευσης

Author

Bernardi, Adriana, Cadelano, Gianluca, Tamburini, Sergio, Natali, Marco, Panizza, Matteo, Bison, Paolo, Ferrarini, Giovanni, Sachini, Maria, Tsoutis, Constantinos, Mazzasalma, Giulia, Pockelé, Luc, Romero Amorrortu, Ander, Fraga De Cal, Beatriz, Garrido Marijuan, Antonio, Arregi Goikolea, Beñat, Ceschel, Giulia, Bordignon, Mirco, Magaton, Tomas, Rossi, Leonardo, Fodor, Loredana, Tanase, Alexandru, Lezak, Emil, Pluta, Jakub, Ducman, Vilma, Knez, Friderik, Dolenec, Sabina, Frankovič, Ana, Knez, Nataša, Lešek, Anja, Kvočka, Davor, Robič, Sebastjan, Šajna, Aljoša, Casati, Anna, Signorini, Sergio, Sonzogni, Francesco, Apostolopoulos, Dimitris, and Demetriou, Evangelos

Subjects
Astrophysics::Instrumentation and Methods for Astrophysics, InnoWEE, H2020, Mathematics::General Topology, Astrophysics::Solar and Stellar Astrophysics, Απόβλητα κατασκευής και κατεδάφισης, High Energy Physics::Experiment, Astrophysics::Earth and Planetary Astrophysics, Εγχειρίδιο εκπαίδευσης, γεωπολυμερή πάνελ
Abstract

Αυτό το έγγραφο παρουσιάζει τη δομή και τα αποτελέσματα του έργου InnoWEE (Horizon 2020 R&I Πρόγραμμα, CallEeB-04-2016, Συμφωνία επιχορήγησης αρ.723916) και παρέχει μια επισκόπηση των κύριων φάσεων και επιτευγμάτων του.

Published
2020
Full Text
View/download PDF

17. D6.6 Evaluation of Life Cycle Thinking analysis (LCT)

Author

Knez, Friderik, Malovrh Rebec, Katja, Brodar, Ana, Tamburini, Sergio, and Panizza, Matteo

Subjects
geopolymeric panels, life cycle thinking (LCT), life cycle assessment (LCA), InnoWEE, H2020
Abstract

Deliverable D6.6 “Evaluation of Life Cycle Thinking analysis (LCT)” presents a summary of the work done in task T6.4 of the InnoWEE project. The work done was focused on several aspects, relevant for life cycle thinking. It also relies on the work and results presented in other deliverables, such as D1.5, addressing the LCA of the products.

Published
2020
Full Text
View/download PDF

19. D9.1 EPQ - Requirement No. 1

Author

Becherini, Francesca, Natali, Marco, Panizza, Matteo, Tamburini, Sergio, Ducman, Vilma, and Manesis, Fotis

Subjects
project, InnoWEE, H2020, ethics
Abstract

Deliverable D9.1 "EPQ-Requirement No.1" identifies and deals with possible ethics issues that may arise from any part of the InnoWEE project.

Published
2017
Full Text
View/download PDF

20. D1.1 Selection/identification of the typologies of building waste to be mixed to geopolymer materials

Author

Tamburini, Sergio, Natali, Marco, Panizza, Matteo, Ducman, Vilma, and Kramar, Sabina

Subjects
InnoWEE, H2020, building waste, CDW, deliverable, geopolymer
Abstract

Deliverable D1.1a “Selection / identification of the typologies of building waste to be mixed to geopolymer materials” is a confidential document delivered as part of WP 1, Task 1.1: Identify, collect and categorize the typologies of building waste to be mixed to geopolymer materials and pilot production.

Published
2017
Full Text
View/download PDF

22. Characterization of Fibre Reinforced Geopolymers as structural strengthening material for brick masonry

Author

GARBIN, ENRICO, PANIZZA, MATTEO, VALLUZZI, MARIA ROSA, NARDON, FABIOLA, TAMBURINI, SERGIO, FAVARO, MONICA, and MAGRO, ANDREA

Subjects
Fibre Reinforced Geopolymers, masonry architectural heritages, geopolymer, steel fibres, compression, splitting, pull-off test, SEM-EDS analyses, compatibility, FRGP, Geopolymers
Abstract

The study presents a preliminary assessment of Fibre Reinforced Geopolymers (FRGP) as strengthening material for masonry architectural heritages. FRGP was made of geopolymeric matrixes reinforced with mineral fibre nets. Modern and innovative materials should take into account fundamental preservation criteria when applied for restoration purposes. Consequently, interdisciplinary studies are a key factor for the evaluation of durability and compatibility requirements from a chemical, physical and mechanical standpoints of new materials for strengthening intervention. Geopolymeric matrixes have the potential to comply with those requirements, thanks to their tailored chemical and mechanical characteristics, and also to provide fire and/or heat-resistant performances much better than common organic polymeric matrixes. The applicability of geopolymers as a matrix of composite materials for structural strengthening of brick masonry was investigated with an interdisciplinary approach. Physico-chemical measurements using XRD, MAS-NMR and ESEM/EDS were performed to check the compatibility of geopolymers with both fibres and brick structures. Compression, splitting, pull-off were performed to check the main mechanical characteristic and adhesion to a clay brick substrate of the matrixes. The experimental tests are described and the main results for selecting a performing FRGP are presented and discussed in detail.

Published
2014

32. Experimental characterization of composite-to-brick masonry shear bond

Author

de Felice, Gianmarco, primary, Aiello, Maria Antonietta, additional, Bellini, Alessandro, additional, Ceroni, Francesca, additional, De Santis, Stefano, additional, Garbin, Enrico, additional, Leone, Marianovella, additional, Lignola, Gian Piero, additional, Malena, Marialaura, additional, Mazzotti, Claudio, additional, Panizza, Matteo, additional, and Valluzzi, Maria Rosa, additional

Published
2015
Full Text
View/download PDF

35. Recent advances in the structural analysis and intervention criteria for historic stone masonry constructions subjected to seismic actions / Najnoviji pomaci u analizi konstrukcija i kriterijima za izvodenje zahvata na historijskim kameninm zidanim konstrukcijama izlozenim siezmickom djelovanju

Author

Claudio Modena, Maria Rosa Valluzzi, Francesca da Porto, Casarin, F., Garbin, Enrico, Marco Munari, Mazzon, Nicola, Panizza, Matteo, and MASSIMO DALLA BENETTA

Subjects
damage analysis, monitoring, masonry, strengthening, cultural heritage, historical constructions, seismic retrofitting, upgrading, seismic vulnerability, strategies and techniques of interventions, FE modelling, case studies
Published
2010

39. Criteri e tecniche per l'intervento di miglioramento sismico di edifici storici

Author

Claudio Modena, Maria Rosa Valluzzi, Francesca da Porto, Casarin, F., Garbin, Enrico, Panizza, Matteo, Mazzon, Nicola, Marco Munari, MASSIMO DALLA BENETTA, and Bettiol, G.

Subjects
strategie e tecniche di intervento, patrimonio culturale, costruzioni storiche, miglioramento sismico, vulnerabilità sismica
Published
2009

47. Round Robin Test for composite-to-brick shear bond characterization.

Author

Oliveira, Daniel, Caratelli, Angelo, Castori, Giulio, Corradi, Marco, Felice, Gianmarco, Garbin, Enrico, Garcia, David, Garmendia, Leire, Grande, Ernesto, Ianniruberto, Ugo, Kwiecień, Arkadiusz, Leone, Marianovella, Lignola, Gian, Lourenço, Paulo, Malena, Marialaura, Micelli, Francesco, Panizza, Matteo, Papanicolaou, Catherine, Prota, Andrea, and Sacco, Elio

Abstract

The paper presents the experience of a working group within the RILEM Technical Committee 223-MSC 'Masonry Strengthening with Composite materials', aimed at developing a standardized, reliable procedure for characterizing the bonding mechanism of masonry elements strengthened with composite materials under shear actions. Twelve laboratories from European universities and research centers were involved. Two different set-ups were compared, for single-lap and double-lap shear tests (the latter in two versions). Four kinds of fiber fabrics, i.e., glass, carbon, basalt and steel, were applied with epoxy resins (wet lay-up system) to clay brick units, for a total of 280 monotonic tests. The results provided information regarding the response of externally bonded-to-brick composites in terms of observed failure mechanisms, load capacity, effective transfer length, and bond shear stress-slip behavior. The test results of the 12 laboratories constitute a set of statistically representative data which may conveniently be used for setting appropriate design provisions and guidelines. [ABSTRACT FROM AUTHOR]

Published
2012
Full Text
View/download PDF

49. Experimental characterization of composite-to-brick masonry shear bond

Author

Alessandro Bellini, Francesca Ceroni, Maria Antonietta Aiello, Stefano De Santis, Marianovella Leone, Gian Piero Lignola, Claudio Mazzotti, Maria Rosa Valluzzi, Enrico Garbin, Gianmarco de Felice, Matteo Panizza, Marialaura Malena, de Felice, Gianmarco, Aiello, Maria Antonietta, Bellini, Alessandro, Ceroni, Francesca, De Santis, Stefano, Garbin, Enrico, Leone, Marianovella, Lignola, Gian Piero, Malena, Marialaura, Mazzotti, Claudio, Panizza, Matteo, Valluzzi, Maria Rosa, Aiello, MARIA ANTONIETTA, DE SANTIS, Stefano, DE FELICE, Gianmarco, G., de Felice, M. A., Aiello, A., Bellini, F., Ceroni, S., De Santi, E., Garbin, M., Leone, Lignola, GIAN PIERO, M., Malena, C., Mazzotti, M., Panizza, M. R., Valluzzi, and Santis, Stefano De

Subjects
Masonry, FRP, SRP , Composites, Bond, Materials science, Bond, Composites, FRP, Masonry, SRP, Building and Construction, Civil and Structural Engineering, Mechanics of Materials, Materials Science (all), 0211 other engineering and technologies, Composite, 02 engineering and technology, Masonry, FRP , SRP, Composites, Bond, 021105 building & construction, General Materials Science, Mechanics of Material, Composite material, Brick, Bond strength, business.industry, Epoxy, Structural engineering, Fibre-reinforced plastic, 021001 nanoscience & nanotechnology, Strength of materials, visual_art, visual_art.visual_art_medium, Round robin test, Mortar, 0210 nano-technology, business
Abstract

The paper presents a Round Robin Test (RRT) devoted to the characterization of the shear bond performance of fibre-reinforced strengthening systems bonded with epoxy resin to brick masonry. The research was carried out by six laboratories involved in the RILEM TC 250-CSM (Composites for the Sustainable strengthening of Masonry) as a continuation and an extension of a previous RRT1 performed within the RILEM TC 223-MSC (Masonry Strengthening with Composites). In this second investigation (RRT2), the same FRP (basalt, carbon and glass textiles) and SRP (comprising steel textiles) composites were tested, but shear bond tests were carried out on both brick units and masonry prisms. The role of the bed joints of mortar was investigated in terms of shear bond strength, load–displacement response curve, axial strains profile along the bonded area and effective transfer length, for each of the four considered strengthening systems. Single lap and double lap testing setups were used and the comparison of experimental outcomes provided a validation of both results and test methods. Finally, test outcomes led to the determination of the mean and the characteristic values of the experimental-based calibration coefficient provided by design codes for the evaluation of the composite-to-substrate bond strength.

Published
2016

Catalog

Books, media, physical & digital resources
See catalog results