Search

This contribution lays the foundation for the European database of explanted UHMWPE liners from total joint replacements. Three EU countries (Czech Republic, Italy and Spain) have joined their datasets containing anonymized patient data (such as age and BMI), manufacturer data (such as information on UHMWPE crosslinking, thermal treatment and sterilization), orthopedic evaluation (such as total duration of the implant in vivo and reasons for its revision) and material characterization (such as oxidative degradation and micromechanical properties). The joined database contains more than 500 entries, exhibiting gradual growth, and it is beginning to show interesting trends, which are discussed in our contribution, including (i) strong correlations between UHMWPE oxidative degradation, degree of crystallinity and microhardness; (ii) statistically significant differences between UHMWPE liners with different types of sterilization; (iii) realistic correlations between the extent of oxidative degradation and the observed reasons for total joint replacement failures. Our final objective and task for the future is to continuously expand the database, involving researchers from other European countries, in order to create a robust tool that will contribute to the better understanding of structure-properties-performance relationships in the field of arthroplasty implants.

Introduction: The loss of bone mass, as a consequence of bone remodelling, in the proximal third of the femur, is a factor that contributes to the failure of hip prostheses in the medium to long term. This periprosthetic remodelling occurs mainly during the first 12 months after the operation. The aim is to evaluate the behaviour at one year of a new anatomical stem, the ANATO® stem (2015-Stryker®), which is a redesign of its predecessor (ABG-ii®-Stryker stem) by means of bone densitometry., Method: Prospective, controlled study in which the changes in bone mineral density (BMD) observed around the seven areas of Gruen in a group of 61 patients affected by primary coxarthrosis, in whom an ANATO® stem was implanted, are analysed densitometrically. The healthy hip was taken as the control group. The existence of differences in the remodelling pattern according to sex, age and body mass index (BMI) was compared. The follow-up was during the first year after the intervention., Results: After one year of follow-up, decreases of bone mineral density in zone seven of -5.9% were observed, being this decrease statistically significant. No differences were found in the remodelling pattern according to age, sex and body mass index., Conclusion: The ANATO® stem allows an efficient transmission of loads from the stem to the proximal femur. Only in zone seven significant bone atrophy is observed. Differences in age, BMI and sex do not seem to influence the bone remodelling around this new stem., (Copyright © 2020 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.)

Background: Periprosthetic bone remodeling, which is a phenomenon observed in all femoral stems, has a multifactorial origin as it depends on factors related to the patient, the surgical technique, and the design of the implant. To determine the pattern of remodeling produced by 2 models of anatomic cementless implants, we quantified the changes in bone mineral density (BMD) in the 7 areas of Gruen observed at different moments after surgery during the first postoperative year., Methods: A prospective, comparative, controlled, 1-year follow-up densitometric study was carried out in 2 groups of patients suffering from primary unilateral hip osteoarthritis. In the first group, with 68 patients, an ABG-II stem was implanted. In the second, with 66 patients, the ANATO stem was used. The contralateral, healthy hip was taken as a control., Results: Both groups showed a decrease in BMD at 3 months in all the areas, which recovered at the end of the study, except in zone 7: there was a 17.7% decrease in the ABG-II group and a 5.9% decrease in the ANATO group. In zones 2 and 6, where more loads are transmitted, conservation of BMD is observed in response to Wolff's law. The differences in the pattern of remodeling between groups were maintained despite the age, gender, and BMI of the patients or the size of the implants., Conclusion: The ANATO stem achieved a more efficient transmission of loads at the metaphyseal level, which promotes bone preservation at the proximal femur, than the ABG-II stem., (© 2020 The Authors.)

To establish the pattern of bone remodeling caused by a cementless, anatomic implant, we intend to evaluate the changes in bone mineral density observed after surgery in the Gruen zones. A controlled, prospective study was carried out, in which a group of 37 patients with primary coxarthrosis were densitrometrically analyzed over the 1 year period following the implant of an ANATO stem (Stryker). The patient's healthy hip was taken as the control. Any differences in the remodeling pattern were compared according to age, body mass index, and implant size. Decreases in bone mineral density were observed after 3 months in all of the zones studied. However, this bone mineral density loss was recovered in all zones by the end of the study, except in zone 7 where a decrease of 7.2% in bone mass was observed. In zones 2 and 6, where more loads are transmitted, bone mass preservation, in accordance with Wolff's law, can be seen. No differences were found in the remodeling pattern in relation to age and body mass index. There were also no differences related to stem size except in zones 1 and 7. The ANATO stem achieves an efficient transmission of loads between the stem and the proximal femur, providing enough mechanical loads for bone preservation. It is only in zone 7 where significant bone atrophy can be observed, attributable to the damage that this area suffers during the surgical process and the subsequent stress-shielding caused by the implant design., (Copyright © 2017 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.)

This prospective study was designed to evaluate 196 Anatomique Benoist Giraud (ABG II) total hip arthroplasties which were implanted between September 1999 and December 2000. A minimum 11 years follow up was completed in 183 cases. The bearing surfaces were polyethylene-zirconia in 84 cases, polyethylene-metal in 42 and ceramic-ceramic in 57. Changes in the femoral stem design, in relation to the previous ABG I model, have led to a significant improvement in stress-shielding. Polyethylene wear rate was lower by more than 50% compared with non-crosslinked polyethylene. Excellent and good results were obtained in 90.32% of cases, and implant survival was 98.39% at the end of follow-up., (Copyright © 2013 Elsevier Inc. All rights reserved.)

We report our 10-year follow-up results of 630 consecutive Anatomique Benoist Giraud I hip prostheses implanted between June 1990 and December 1995. At this time, 520 were satisfactory and 25 had been revised. Although the majority of patients remained asymptomatic at the end of follow-up, the real survivorship of the implant was less than 91% (33 patients who were in the waiting list for revision due to osteolysis at that time were revised by December 2007). On the other hand, radiographic outcomes were of concern: around 90% of patients showed progressive stress shielding and large granulomatous lesions in the proximal femur, and more than 82% of patients exhibited polyethylene wear in excess of 1 mm (mean=1.69 mm)., (Copyright © 2010 Elsevier Inc. All rights reserved.)

Background: A hip replacement with a cemented or cementless femoral stem produces an effect on the bone called adaptive remodelling, attributable to mechanical and biological factors. All of the cementless prostheses designs try to achieve an optimal load transfer in order to avoid stress-shielding, which produces an osteopenia.Long-term densitometric studies taken after implanting ABG-I and ABG-II stems confirm that the changes made to the design and alloy of the ABG-II stem help produce less proximal atrophy of the femur. The simulation with FE allowed us to study the biomechanical behaviour of two stems. The aim of this study was, if possible, to correlate the biological and mechanical findings., Methods: Both models with prostheses ABG-I and II have been simulated in five different moments of time which coincide with the DEXA measurements: postoperative, 6 months, 1, 3 and 5 years, in addition to the healthy femur as the initial reference. For the complete comparative analysis of both stems, all of the possible combinations of bone mass (group I and group II of pacients in two controlled studies for ABG-I and II stems, respectively), prosthetic geometry (ABG-I and ABG-II) and stem material (Wrought Titanium or TMZF) were simulated., Results and Discussion: In both groups of bone mass an increase of stress in the area of the cancellous bone is produced, which coincides with the end of the HA coating, as a consequence of the bottleneck effect which is produced in the transmission of loads, and corresponds to Gruen zones 2 and 6, where no osteopenia can be seen in contrast to zones 1 and 7., Conclusions: In this study it is shown that the ABG-II stem is more effective than the ABG-I given that it generates higher tensional values on the bone, due to which proximal bone atrophy diminishes. This biomechanical behaviour with an improved transmission of loads confirmed by means of FE simulation corresponds to the biological findings obtained with Dual-Energy X-Ray Absorptiometry (DEXA).

We report an uncommon case of heterotopic ossification affecting the median nerve at the level of the distal forearm and carpal tunnel with some unusual features: its length, the concomitant involvement of the ulnar nerve at Guyon's canal and a positive family history of heterotopic ossification.

The aim of this prospective cohort study was to determine the densitometric relevance of minor design modifications of a cementless stem designed to improve proximal load transfer. We used a prospective cohort study with densitometric analysis over a five-year period of two groups of patients with primary osteoarthritis. The first group, 56 hips, received the first version of the ABG stem (ABG-I); the second group, 54 hips, had the ABG-II stem. The results obtained with the ABG-I stem showed a decrease of bone density in proximal areas that ranged from 13% to 37%. However, the new design had a decrease of the same areas that ranged from 9% to 23%. These differences were noted at the end of the first post-operative year and remained stable, except in zone 7, where they were progressive. There is little evidence that the modified stem reduces femoral bone density loss.

The implantation of a cemented or cementless femoral stem changes the physiological load transfer on the femur producing an effect on the bone called adaptative remodeling. The patterns of this remodeling are attributed to mechanical and biological factors, and those changes in bone mineral density have been determined in long-term densitometry studies. This technique has proved to be a useful tool able to quantify small changes in bone density in different femoral areas, and it is considered to be ideal for long-term studies. On the other hand, the finite element (FE) simulation allows the study of the biomechanical changes produced in the femur after the implantation of a femoral stem. The aim of this study was to contrast the findings obtained from a 5 year follow-up densitometry study that used a newly designed femoral stem (73 patients were included in this study), with the results obtained using a finite element simulation that reproduces the pattern of load transfer that this stem causes on the femur. In this study we have obtained a good comparison between the results of stress of FE simulation and the bone mass values of the densitometry study establishing a ratio between the increases in stress (%) versus the increases in bone density (%). Hence, the changes in bone density in the long term, compared with the healthy femur, are due to different load transfers after stem implantation. It has been checked that in the Gruen zone 7 at 5 years, the most important reduction in stress (7.85%) is produced, which coincides with the highest loss of bone mass (23.89%). Furthermore, the simulation model can be used with different stems with several load conditions and at different time periods to carry out the study of biomechanical behavior in the interaction between the stem and the femur, explaining the evolution of bone density in accordance to Wolff's law, which validates the simulation model.

Bone remodeling after a hip arthroplasty has been quantified with dual energy x-ray absorptiometry, usually for short-term follow-up. We used this technique to determine the long-term remodeling produced by a hydroxyapatite-coated, anatomic stem. Eighty patients with unilateral hip osteoarthritis were included in the study. The contralateral, healthy hip was taken as control. Bilateral dual energy x-ray absorptiometry scans were done before the surgery, at 15 days, and 1 and 10 years postoperatively. There was a decrease of bone mineral density in zones 1 and 7, which ranged from 12.2% to 27.3% at the end of the first year. There were no changes in zones 1 to 6 from the 1st to the 10th year, but there was a late decrease, up to 42.9%, in zone 7. The changes of bone mineral density promoted by this stem occurred in the first postoperative year. Late loss was seen only in area 7.

A hip replacement with a cemented or cementless femoral stem produces an effect on the bone called adaptive remodelling, attributable to mechanical and biological factors. The objective of all of cementless prostheses designs has been to achieve a perfect transfer of loads in order to avoid stress-shielding, which produces an osteopenia. In order to quantify this, the long term and mass-produced study with dual energy X-ray absorptiometry (DEXA) is necessary. Finite element (FE) simulation makes possible the explanation of the biomechanical changes which are produced in the femur after stem implantation. The good correlation obtained between the results of the FE simulation and the densitometric study allow, on one hand, to explain from the point of view of biomechanical performance the changes observed in bone density in the long-term, where it is clear that these are due to a different transfer of load in the implanted model compared to the healthy femur; on the other hand, it validates the simulation model, in a way that it can be used in different conditions and at different time periods, to carry out a sufficiently precise prediction of the evolution of the bone density from the biomechanical behaviour in the interaction between the prosthesis and femur.

The authors report a case of an irreducible dorsal dislocation of the first metatarsophalangeal joint, with concomitant Lisfranc dislocation and fractures of the second, third, and fourth metatarsals. This combination has been reported only once in the literature. This extremely rare combined injury results in a floating metatarsal. Open reduction of the metatarsophalangeal joint dislocation and fixation of Lisfranc joint and metatarsal fractures with Kirschner wires was performed. One year after surgery, the patient is active and the first metatarsophalangeal joint is asymptomatic, but there is mild pain in the Lisfranc joint.

A prospective study was undertaken on 183 patients who had suffered a femoral neck fracture between 1998 and 1999. The aim was to compare the complication rates for the classical posterior approach and the modified posterior approach. The modified posterior approach used was the one described by Williams et al., which preserved the pyriformis, the labrum and the capsule. Group 1 included 95 patients, who were operated on by the posterior approach. Group 2 included 88 patients, who were operated on by the modified posterior approach. The dislocation rate for the posterior approach was 7.4% (7 cases), and 1.1% (1 case) for the modified posterior approach. This difference was statistically significant (p < 0.05). There were no significant differences in the incidences of other intraoperative and postoperative complications. We concluded that the modified posterior approach significantly increases the stability of a hemiarthroplasty in relation to the classical posterior approach.

Between 1995 and 1999, 46 acute nonpathological humeral shaft fractures were treated with retrograde Marchetti-Vicenzi humeral nailing. The mean healing time of all fractures was 10.8 weeks. Forty-five fractures (97.9%) united primarily, and one needed bone grafting (2.1%). Function of the shoulder was excellent in 35 patients (76.1%) and moderate in 11 (23.9%). Elbow function was also excellent in 35 patients and moderate in 11. Global functional results were excellent in 16 patients (34.8%), good in 22 (47.8%) and fair in 8 (17.4%). There were 4 cases of 10 degrees varus malunion (8.6%), one case of 15 degrees varus malunion (2.1%), and one case of 15 degrees anterior angulation malunion (2.1%). These malunions were clinically well tolerated. Four patients required removal of the nail because of posterior elbow pain. Retrograde Marchetti-Vicenzi nailing is an acceptable alternative for the treatment of acute humeral shaft fractures with a low complication rate.

The objective of this study was to find out whether the morphology of various types of hip fractures and the mean ages of the patients had changed in a recent 10-year period. All patients aged 65 years or more with acute hip fracture admitted to Miguel Servet University Hospital in 1989-1990 (n = 457) and in 1999-2000 (n = 518) were studied. The results showed a significant increase in the incidence of displaced cervical fractures (P < 0.001) and a decrease in the incidence of nondisplaced cervical fractures (P < 0.001) in women. The incidence of different types of trochanteric fractures did not vary. No change was observed in the mean age of patients with cervical fractures, but the mean age of women with A12 trochanteric fractures was significantly higher in 1999-2000 than in 1989-1990 (P < 0.05).