Search

The mussel thread-plaque system exhibits strong adhesion and high ductility, allowing it to adhere to various surfaces. While the microstructure of plaques has been thoroughly studied, the effect of their unique porous structure on ductility remains unclear. This study firstly investigated the porous structure of mussel plaque cores using scanning electron microscopy (SEM). Two-dimensional (2D) porous representative volume elements (RVEs) with scaled distribution parameters were generated, and the calibrated phase-field modelling method was applied to analyse the effect of the pore distribution and multi-scale porous structure on the failure mechanism of porous RVEs. The SEM analysis revealed that large-scale pores exhibited a lognormal size distribution and a uniform spatial distribution. Simulations showed that increasing the normalised mean radius value of the large-scale pore distribution can statistically lead to a decreasing trend in ductility, strength and strain energy, but cannot solely determine their values. The interaction between pores can lead to two different failure modes under the same pore distribution: progressive failure mode and sudden failure mode. Additionally, the hierarchical structure of multi-scale porous RVEs can further increase ductility by 40%-60% compared to single-scale porous RVEs by reducing stiffness, highlighting the hierarchical structure could be another key factor contributing to the high ductility. These findings deepen our understanding of how the pore distribution and multi-scale porous structure in mussel plaques contribute to their high ductility and affect other mechanical properties, providing valuable insights for the future design of highly ductile biomimetic materials.

The mussel byssus system, comprising of the adhesive plaque, distal thread, and proximal thread, plays a crucial role in the survival of marine mussels amongst ocean waves. Whilst recent research has explored the stress-strain behaviour of the distal thread and proximal thread through experimental approaches, little attention has been paid to the potential analytical or modelling methods within the current literature. In this work, analytical and finite element (FE) inverse methods were employed for the first time to identify the hyperelastic mechanical properties of both the plaque portion and the proximal thread. The results have demonstrated the feasibility of applied inverse methods in determining the mechanical properties of the constituents of the mussel byssus system, with the residual sum of squares of 0.0004 ($N^2$) and 0.01 ($mm^2$) for the proximal thread and the plaque portion, respectively. By leveraging mechanical and optical tests, this inverse methodology offers a simple and powerful means to anticipate the material properties for different portions of the mussel byssus system, thus providing insights for mimetic applications in engineering and materials design.

Characterizing urban environments with broad coverages and high precision is more important than ever for achieving the UN's Sustainable Development Goals (SDGs) as half of the world's populations are living in cities. Urban building height as a fundamental 3D urban structural feature has far-reaching applications. However, so far, producing readily available datasets of recent urban building heights with fine spatial resolutions and global coverages remains a challenging task. Here, we provide an up-to-date global product of urban building heights based on a fine grid size of 150 m around 2020 by combining the spaceborne lidar instrument of GEDI and multi-sourced data including remotely sensed images (i.e., Landsat-8, Sentinel-2, and Sentinel-1) and topographic data. Our results revealed that the estimated method of building height samples based on the GEDI data was effective with 0.78 of Pearson's r and 3.67 m of RMSE in comparison to the reference data. The mapping product also demonstrated good performance as indicated by its strong correlation with the reference data (i.e., Pearson's r = 0.71, RMSE = 4.60 m). Compared with the currently existing products, our global urban building height map holds the ability to provide a higher spatial resolution (i.e., 150 m) with a great level of inherent details about the spatial heterogeneity and flexibility of updating using the GEDI samples as inputs. This work will boost future urban studies across many fields including climate, environmental, ecological, and social sciences.

Quantifying the response of marine mussel plaque attachment on wet surfaces remains a significant challenge to a mechanistic understanding of plaque adhesion. Here, we developed a customised microscopy system combined with two-dimensional (2D) in-situ digital image correlation (DIC) to quantify the in-plane deformation of a deformable substrate that interacts with a mussel plaque while under directional tension. By analysing the strain field in the substrate, we gained insight into how in-plane traction forces are transmitted from the mussel plaque to the underlying substrate. Finite element (FE) models were developed to assist the interpretation of the experimental measurement. Our study revealed a synergistic effect of pulling angle and substrate stiffness on plaque detachment, with mussel plaques anchoring to a 'stiff' substrate at a smaller pulling angle having mechanical advantages with higher load-bearing capacity and less plaque deformation. We identified two distinct failure modes, i.e., shear traction-governed failure (STGF) mode and normal traction-governed failure (NTGF). It was found that increasing the substrate stiffness or reducing the pulling angle resulted in a failure mode change from NTGF to STGF. Our findings offer new insights into the mechanistic understanding of plaque and substrate interaction, which provides a general plaque-inspired strategy for wet adhesion., Comment: 19 pages

Natural cellular materials, such as honeycombs, woods, foams, trabecular bones, plant parenchyma, and sponges, may benefit from the disorderliness within their internal microstructures to achieve damage tolerant behaviours. Inspired by this, we have created quasi-disordered truss metamaterials (QTMs) via introducing spatial coordinate perturbations or strut thickness variations to the perfect, periodic truss lattices. Numerical studies have suggested that the QTMs can exhibit either ductile, damage tolerant behaviours or sudden, catastrophic failure mode, depending on the distribution of the introduced disorderliness. A data-driven approach has been developed, combining deep-learning and global optimization algorithms, to tune the distribution of the disorderliness to achieve the damage tolerant QTM designs. A case study on the QTMs created from a periodic Face Centred Cubic (FCC) lattice has demonstrated that the optimised QTMs can achieve up to 100% increase in ductility at the expense of less than 5% stiffness and less than 10% tensile strength. Our results suggest a novel design pathway for architected materials to improve damage tolerance., Comment: 33 pages; 5 main figures, 15 supplementary figures

From geotechnical applications to space exploration, auger drilling is often used as a standard tool for soil sample collection, instrument installation, and others. Focusing on granular flow associated with the rotary drilling process, we investigate the performance of auger drilling in terms of sampling efficiency, defined as the mass ratio of the soil sample collected in the coring tube to its total volume at a given penetration depth, by means of experiments, numerical simulations, as well as theoretical analysis. The ratio of rotation to penetration speed is found to play a crucial role in the sampling process. A continuum model for the coupled granular flow in both coring and discharging channels is proposed to elucidate the physical mechanism behind the sampling process. Supported by a comparison to experimental results, the continuum model provides a practical way to predict the performance of auger drilling. Further analysis reveals that the drilling process approaches a steady state with constant granular flow speeds in both channels. In the steady state, sampling efficiency decreases linearly with the growth of the rotation to penetration speed ratio, which can be well captured by the analytical solution of the model. The analytical solution also suggests that the sampling efficiency is independent of gravity in the steady state, which has profound implications for extraterrestrial sample collection in future space missions., Comment: 23 pages, 10 figures