Search

Transition metal dichalcogenides have been widely utilized as nonlinear optical materials for laser pulse generation applications. Herein, we study the nonlinear optical properties of a VS2-based optical device and its application as a new saturable absorber (SA) for high-power pulse generation. Few-layer VS2 nanosheets are deposited on the tapered region of a microfiber to form an SA device, which shows a modulation depth of 40.52%. After incorporating the microfiber-VS2 SA into an Er-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates varying from 95 to 233 kHz. Under the pump power of 890 mW, the largest output power and shortest pulse duration are measured to be 43 mW and 854 ns, respectively. The high signal-to-noise ratio of 60 dB confirms the excellent stability of the Q-switching state. To the best of our knolowdge, this is the first illustration of using VS2 as an SA. Our experimental results demonstrate that VS2 nanomaterials have a large potential for nonlinear optics applications.

2D ternary transition metal dichalcogenides (TMDCs) have been studied widely by researchers from the fields of nanotechnology to materials science because of the extraordinary chemical/physical characteristics, and significant potential in nanoscale device applications. Here, the application of NbxRe(1−x)S2 nanosheets in ultrafast photonics is studied. The few‐layer NbxRe(1−x)S2 nanosheets are fabricated through liquid phase exfoliation method and a NbxRe(1−x)S2‐microfiber device is constructed by depositing these nanosheets onto the tapered region of a microfiber. After incorporating the NbxRe(1−x)S2‐microfiber saturable absorber (SA) into a net positive dispersion Er‐doped fiber (EDF) laser cavity, the generation of stable dissipative soliton pulses with a pulse duration of 1.03 ps proved as polarization‐locked vector solitons upon further study. With pump power growing to 900 mW, the average output power increases to 116.9 mW without pulse splitting. Besides, the pulse width can be compressed to 149.6 fs outside the cavity by using a single‐mode fiber. Compared with previous works based on 2D materials‐based saturable absorbers, the NbxRe(1−x)S2‐based mode‐locked fiber laser proposed herein, reveals superior comprehensive performance. [ABSTRACT FROM AUTHOR]

The investigation of two-dimensional (2D) nonlinear optical materials offers a promising way to construct the high-performance optical devices in fundamental and industrial applications because of their rich distinct optoelectronic properties. Herein, by utilizing the liquid exfoliation method, vanadium disulfide (VS2) nanosheets are prepared and the thickness is measured to be 3.16 nm. In addition, we have fabricated the VS2-based optical device and the nonlinear optical property is characterized with modulation depth of 23.97%. By using VS2 as saturable absorber, a high stable passively mode-locking Er-doped fiber laser is obtained with pulse duration of 169 fs and the largest average output power of 70.5 mW. The slope efficiency is up to 7.9%. In comparison to recent results of mode-locking fiber lasers with 2D materials, the VS2-based fiber laser demonstrates better performance. To the best of our knowledge, this is the first example of using VS2 for generating femtosecond mode-locked laser pulse. Our experimental results not only reveal VS2 ultrafast photonics application, but also advance the high-performance applications for information science and nonlinear optics. [ABSTRACT FROM AUTHOR]

Transition metal dichalcogenides have been widely utilized as nonlinear optical materials for laser pulse generation applications. Herein, we study the nonlinear optical properties of a VS2-based optical device and its application as a new saturable absorber (SA) for high-power pulse generation. Few-layer VS2 nanosheets are deposited on the tapered region of a microfiber to form an SA device, which shows a modulation depth of 40.52%. After incorporating the microfiber-VS2 SA into an Er-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates varying from 95 to 233 kHz. Under the pump power of 890 mW, the largest output power and shortest pulse duration are measured to be 43 mW and 854 ns, respectively. The high signal-to-noise ratio of 60 dB confirms the excellent stability of the Q-switching state. To the best of our knolowdge, this is the first illustration of using VS2 as an SA. Our experimental results demonstrate that VS2 nanomaterials have a large potential for nonlinear optics applications. [ABSTRACT FROM AUTHOR]

In this work, we investigate VSe2 for generating femtosecond and large energy mode-locked laser pulses for the first time. Two types of VSe2 based saturable absorbers (SAs), microfiber–VSe2 and VSe2/polyvinyl alcohol (PVA), are prepared, which exhibit strong nonlinear optical characteristics with a modulation depth (ΔT) of 22.5% and 1.849%, respectively. In contrast to other transition metal dichalcogenides (TMDCs), theoretical calculations show that VSe2 is a metallic TMDC SA. With the implementation of microfiber–VSe2, conventional soliton mode-locking Er-doped fiber (EDF) laser is demonstrated with an ultrashort pulse duration of 910 fs. Based on VSe2/PVA, a large energy EDF laser is established. The maximum single pulse energy is 25.57 nJ. This study suggests that VSe2 possesses application potential in ultrafast photonics and provides a valuable strategy for the development of TMDC based devices with desirable optoelectronic properties. [ABSTRACT FROM AUTHOR]