Search

The unique screw-shape design and microstructure of implants pose a challenge for mechanical debridement in removing biofilms. Biofilms exhibit increased resistance to antimicrobials relative to single planktonic cells, emphasizing the need for effective biofilm removal during periodontal therapy for peri-implantitis treatment. To tackle this issue, our team evaluated the effectiveness of low-temperature plasma (LTP) for disinfecting titanium discs contaminated with multispecies biofilms associated with peri-implantitis, specifically focusing on biofilms matured for 14 and 21 days as well as biofilms that had formed on Straumann Ⓡ Ti-SLA implants for 21 days. The biofilms included Actinomyces naeslundii , Porphyromonas gingivalis , Streptococcus oralis , and Veillonella dispar , which were grown in anaerobic conditions. These biofilms were subjected to LTP treatment for 1, 3, and 5 min, using distances of 3 or 10 mm from the LTP nozzle to the samples. Control groups included biofilms formed on Ti discs or implants that received no treatment, exposure to argon flow at 3 or 10 mm of distance for 1, 3, or 5 min, application for 1 min of 14 μg/mL amoxicillin, 140 μg/mL metronidazole, or a blend of both, and treatment with 0.12% chlorhexidine (CHX) for 1 min. For the implants, 21-day-old biofilms were treated with 0.12% CHX 0.12% for 1 min and LTP for 1 min at a distance of 3 mm for each quadrant. Biofilm viability was assessed through bacterial counting and confocal laser scanning microscopy. The impact of LTP was investigated on reconstituted oral epithelia (ROE) contaminated with P. gingivalis , evaluating cytotoxicity, cell viability, and histology. The results showed that a 1 min exposure to LTP at distances of 3 or 10 mm significantly lowered bacterial counts on implants and discs compared to the untreated controls ( p < 0.017). LTP exposure yielded lower levels of cytotoxicity relative to the untreated contaminated control after 12 h of contamination ( p = 0.038), and cell viability was not affected by LTP ( p ≥ 0.05); thus, LTP-treated samples were shown to be safe for tissue applications, with low cytotoxicity and elevated cell viability post-treatment, and these results were validated by qualitative histological analysis. In conclusion, the study's results support the effectiveness of 1 min LTP exposure in successfully disinfecting mature peri-implantitis multispecies biofilms on titanium discs and implants. Moreover, it validated the safety of LTP on ROE, suggesting its potential as an adjunctive treatment for peri-implantitis.

Background: Peri-implant diseases are emerging issues in contemporary implant dentistry. As biofilms play a critical role in peri-implant diseases, the characteristic of resisting bacterial adhesion would be ideal for dental implants. The aims of the study were to compare titanium (Ti) and zirconia (Zr) implants regarding the amount of biofilm formation at different time frames and assess the distribution of biofilm on different aspects of dental implants., Methods: Biofilm was developed on Ti and Zr dental implants with a peri-implant-related multispecies model with Streptococcus oralis , Actinomyces naeslundii , Veillonella dispar , and Porphyromonas gingivalis , for 3 and 14 days. Quantitative assessment was performed with the measurement of total bacterial viability (colony forming units, CFU/mg). Scanning electron microscopy (SEM) was used to evaluate biofilm formation on different aspects of the implants., Results: Three-day-old biofilm on Ti implants was significantly higher than that on Zr implants ( p < 0.001). The Ti and Zr groups were not significantly different for 14-day-old biofilm. SEM images demonstrated that 3-day-old biofilm on Zr implants was sparse while biofilm growth was more pronounced for 3-day-old biofilm on Ti implants and 14-day-old biofilm groups. It appeared that less biofilm formed on the valley compared to the thread top for 3-day-old biofilm on Zr implants. Differences between the valley and the thread top became indistinguishable with the development of mature biofilm., Conclusion: While early formed biofilms show greater accumulation on Ti implants compared to Zr implants, older biofilms between the two groups are comparable. The distribution of biofilms was not uniform on different areas of implant threads during early biofilm development., Competing Interests: All authors declare that there is no conflict of interests regarding this manuscript., (Copyright © 2023 Lan-Lin Chiou et al.)

Purpose: To investigate surface characteristics (roughness and contact angle), anti-biofilm formation, and mechanical properties (mini-flexural strength) of computer-aided design and computer-aided manufacturing (CAD-CAM) polymethylmethacrylate (PMMA) polymer, and three-dimensional (3D) printed resin for denture base fabrication compared with conventional heat polymerized denture base resins., Materials and Methods: A total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM (AvaDent), one 3D printed (Cosmos Denture), and two conventional heat polymerized (Lucitone 199 and VipiWave) materials for denture base fabrication. Roughness was determined by Ra value; the contact angle was measured by the sessile drop method. The biofilm formation inhibition behavior was analyzed through Candida albicans adhesion, while mini-flexural strength test was done using a three-point bending test. The data were analyzed using descriptive and analytical statistics (α = 0.05)., Results: The CAD-CAM PMMA group showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). 3D printed specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 μm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa). However, there was no statistical difference between CAD-CAM PMMA and conventional groups for roughness, contact angle, and mini-flexural strength., Conclusions: CAD-CAM milled materials present surface and mechanical properties similar to conventional resins and show improved behavior in preventing C. albicans adhesion. Nevertheless, 3D printed resins present decreased mini-flexural strength., (© 2022 by the American College of Prosthodontists.)

Background: The use of low-temperature plasma (LTP) is a novel approach to treating peri-implantitis. LTP disrupts the biofilm while conditioning the surrounding host environment for bone growth around the infected implant. The main objective of this study was to evaluate the antimicrobial properties of LTP on newly formed (24 h), intermediate (3 days), and mature (7 days) peri-implant-related biofilms formed on titanium surfaces., Methods: Actinomyces naeslundii (ATCC 12104), Porphyromonas gingivalis (W83), Streptococcus oralis (ATCC 35037), and Veillonella dispar (ATCC 17748) were cultivated in brain heart infusion supplemented with 1% yeast extract, hemin (0.5 mg/mL), and menadione (5 mg/mL) and kept at 37°C in anaerobic conditions for 24 h. Species were mixed for a final concentration of ~10 5 colony forming units (CFU)/mL (OD = 0.01), and the bacterial suspension was put in contact with titanium specimens (7.5 mm in diameter by 2 mm in thickness) for biofilm formation. Biofilms were treated with LTP for 1, 3, and 5 min at 3 or 10 mm from plasma tip to sample. Controls were those having no treatment (negative control, NC) and argon flow under the same LTP conditions. Positive controls were those treated with 14  μ g/mL amoxicillin and 140  μ g/mL metronidazole individually or combined and 0.12% chlorhexidine ( n = 6 per group). Biofilms were evaluated by CFU, confocal laser scanning microscopy (CLSM), and fluorescence in situ hybridization (FISH). Comparisons among bacteria; 24 h, 3-day, and 7-day biofilms; and treatments for each biofilm were made. Wilcoxon signed-rank and Wilcoxon rank sum tests were applied ( α = 0.05)., Results: Bacterial growth was observed in all NC groups, corroborated by FISH. LTP treatment significantly reduced all bacteria species compared to the NC in all biofilm periods and treatment conditions ( p ≤ 0.016), and CLSM corroborated these results., Conclusion: Within the limitation of this study, we conclude that LTP application effectively reduces peri-implantitis-related multispecies biofilms on titanium surfaces in vitro ., Competing Interests: The authors declare no competing interests., (Copyright © 2022 Beatriz H. D. Panariello et al.)

Introduction: Fixed orthodontic appliances create areas of stagnation for dental biofilms and make it difficult to clean the teeth; therefore, there is a risk of developing incipient caries lesions during the orthodontic treatment. The objective of this study is to determine if the combination of 2 different therapies, phototherapy by blue light (BL) and the antimicrobial 0.12% chlorhexidine (CHX) on enamel, orthodontic brackets, and elastics, would reduce or inhibit mature Streptococcus mutans biofilms and their regrowth on these substrates 24 hours after the application of the treatment; and if this treatment would interfere with bracket adhesion to the enamel., Methods: Biofilms of S. mutans UA159 were formed for 5-days over samples composed of a bovine enamel, orthodontic bracket, and orthodontic elastic. Then, the specimens were treated with 0.89% NaCl for 1 minute, BL for 12 minutes (72 J/cm 2 ), 0.12% CHX for 1 minute, and BL for 12 minutes, followed by 0.12% CHX for 1 minute (BL+CHX). Biofilm was evaluated by colonies forming units and dry weight immediately after treatments and 24 hours after treatments (regrowth). The pH of the spent media was measured on the fifth and sixth days. Biofilm formation on the samples after the treatments and regrowth was visually evaluated by confocal laser scanning microscopy. Shear bond strength (SBS) between bracket and enamel was evaluated using a universal testing machine at a crosshead speed of 1 mm/min. After bonding, specimens were thermocycled (500× at 5-55°C), treated, and thermocycled again., Results: After 5 days of biofilm formation, BL+CHX significantly reduced the bacterial viability on enamel compared with NaCl (P = 0.004) and BL (P = 0.014). For bracket and elastic, all the treatments resulted in similar bacterial viability (P ≥0.081). In the regrowth, CHX and BL+CHX significantly reduced the bacterial viability in the enamel compared with the NaCl (P ≤0.015) and BL (P ≤0.013). For bracket, BL+CHX significantly reduced the bacterial viability compared with NaCl (P = 0.008) and BL (P = 0.009). For the elastic, BL+CHX eliminated the biofilms from the substrate. CHX and BL+CHX significantly reduced the bacterial viability 24 hours after treatment for all substrates (P ≤0.05). The media pH significantly increased when samples were treated with CHX and BL+CHX (P ≤0.001). Confocal laser scanning microscopy images visually showed an abundant quantity of red cells in the samples treated with BL+CHX. There was no difference in the SBS between the treatments (P ≥0.932)., Conclusions: The association between BL and CHX reduced S. mutans biofilm and its regrowth on an in vitro orthodontic model and did not influence the bonding strength between bracket and enamel., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Hypothesis: Injuries requiring resection of tissue followed by autogenous bone transfer may be prone to infection by Staphylococcus aureus, impeding recovery and increasing medical costs. For critical sized defects, the common approach to reconstruction is a tissue transfer procedure but is subject to limitations (e.g., donor site morbidity, cost, operating time). Utilizing beta tricalcium phosphate (β-TCP) as bone grafting material augmented with silver (Ag), a custom graft may be 3D printed to overcome limitations and minimize potential infections., Experiments: Scaffolds were 3D printed and augmented with Ag by external attack on the surface by silver nitrate (AgNO 3 ) at varying concentrations (0.1, 1.0, 10% wt/wt of scaffold). The augmented scaffolds were evaluated utilizing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and inductively coupled plasma mass spectroscopy (ICP-MS) to verify the presence of Ag and phosphate (PO 4 ) groups followed by electron microscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to gather information of chemical and physical properties. Preliminary biocompatibility and bactericidal capacity of the scaffolds were tested using human osteoprogenitor (hOP) cells and methicillin-sensitive S. aureus strain, respectively., Results: XRD, FTIR, ICP-MS, TGA, and DSC confirmed presence of Ag and PO 4 groups, whereas electron microscopy showed a decrease in Ca and an increase in Ag ions, decreasing Ca/P ratio with increasing surfactant concentrations. PrestoBlue assays yielded an increase in fluorescence cell counts among experimental groups with lower concentrations of Ag characterized by their characteristic trapezoidal shape whereas cytotoxicity was observed at higher concentrations. Similar observations were made with alkaline phosphatase assays. Antimicrobial evaluation showed reduced colony-forming units (CFU) among all experimental groups when compared to 100% β-TCP. β-TCP scaffolds augmented with Ag ions facilitate antibacterial effects while promoting osteoblast adhesion and proliferation., (© 2021 Wiley Periodicals LLC.)

Background: Antimicrobial photodynamic therapy (aPDT) efficiency on Candida albicans is recognized in free-floating cultures. Though, the lack of aPDT effectiveness against C. albicans organized in biofilms is still unclear. This study aimed to explore the role of the extracellular matrix (ECM) in the protection against aPDT in C. albicans biofilms., Methods: C. albicans SN 425 wild-type and two mutant strains CNJ 2302; Δ/Δefg1 and CJN 2330; Δ/Δtec1 (ECM deficient) were used. Biofilms were grown on 24-well plates and exposed twice-daily to aPDT with 44 μM toluidine blue-O (TBO) for 5 min followed by red light (635 nm) for 1 min (87.6 J/cm²) or 2 min (175.2 J/cm 2 ). Application of just TBO, light, 0.12% chlorhexidine, and ultrapure water were used as controls. After 48 h, biofilms were assessed for dry-weight (DW), colony forming units (CFU), extracellular DNA (eDNA), soluble and insoluble protein (SP/IP), water-insoluble (alkali-soluble) polysaccharide (ASP), water-soluble polysaccharides (WSP), and confocal scanning laser microscopy., Results: The strains with ECM deficient were affected by aPDT. For the mutant strain Δ/Δefg1, aPDT significantly reduced CFU, ASP, DW, eDNA, WSP and IP when compared to NC (p<0.001) and for the Δ/Δtec1, aPDT significantly reduced CFU, eDNA, IP and SP. Whereas CFU, DW, ASP of the wild-type strain biofilms were not reduced (p>0.05)., Conclusions: C. albicans strains with reduced ECM compounds were more sensitive to aPDT suggesting that the ECM may have a significant protection role from aPDT in C. albicans biofilms., (Copyright © 2021. Published by Elsevier B.V.)

Fluconazole-sensitive (CaS) and -resistant (CaR) C. albicans were grown as single-species and dual-species biofilms with Lactobacillus casei (Lc) and Lactobacillus rhamnosus (Lr). Single-species Lc and Lr were also evaluated. Biofilm analysis included viable plate counts, the extracellular matrix components, biomass, and structural organization. Lc reduced the viability of CaS, water-soluble polysaccharides, and eDNA in CaS + Lc biofilm. Lc biofilm presented more eDNA than CaS. The total biomass of CaS + Lc biofilm was higher than the single-species biofilms. The viability of Lc and Lr was reduced by CaR dual-species biofilms. The total and insoluble biomass in CaS + Lr was higher than in single-species CaS biofilms. Lc hindered the growth of CaS, and their association hampered matrix components linked to the structural integrity of the biofilm. These findings allow understanding of how the implementation of probiotics influences the growth of C. albicans biofilms and thereby helps with the development of novel approaches to control these biofilms.

Background: Removal of dental plaque and local application of local chemical adjuncts, such as chlorhexidine (CHX), have been used to control and treat peri-implant disease. However, these methods can damage the surface properties of the implants or promote bacterial resistance. The application of ozone as an adjunctive treatment represents a new approach in the management of peri-implantitis. Thus, the purpose of this study was to evaluate the antimicrobial effect of ozonized physiological saline solution in different concentrations against oral biofilms developed on titanium surface., Methods: Single and multi-species biofilms of Porphyromonas gingivalis, Fusobacterium nucleatum, and Streptococcus oralis were formed on titanium specimens for 5 days in anaerobic conditions. Biofilms were treated with ozonized saline solution at different concentrations (25, 50, and 80 μg/NmL), for 30 seconds and 1 minute. CHX (0.12%) and saline solution (0.89% NaCl) were used as positive and negative controls, respectively. Bacterial viability was quantified by colony forming units (CFU mL -1 ), and biofilm images were acquired by confocal laser scanning microscopy (CLSM). Data were analyzed by parametric test (ANOVA) with Tukey post-hoc test (P < 0.05)., Results: Ozonized saline solution showed antibiofilm activity at a concentration of 80 μg/NmL for 30 seconds and 1 minute, reducing, mainly, Porphyromonas gingivalis viability, with 2.78 and 1.7 log 10 CFU mL -1 of reduction in both single and multi-species biofilms, respectively, when compared to the control (saline), whereas CHX reduced 1.4 and 1.2 log 10 CFU mL -1 ., Conclusion: Ozonized saline solution has antibiofilm activity, with better effect when applied for 1 minute at 80 μg/NmL, being a promising candidate therapy for the treatment of peri-implant diseases., (© 2020 American Academy of Periodontology.)

Root canal disinfection is of utmost importance in the success of the treatment, thus, a novel method for achieving root canal disinfection by electromagnetic waves, creating a synergistic reaction via electric and thermal energy, was created. To study electromagnetic stimulation (EMS) for the disinfection of root canal in vitro, single rooted teeth were instrumented with a 45.05 Wave One Gold reciprocating file. Specimens were sterilized and inoculated with Enterococcus faecalis ATCC 29,212, which grew for 15 days to form an established biofilm. Samples were treated with 6% sodium hypochlorite (NaOCl), 1.5% NaOCl 1.5% NaOCl with EMS, 0.9% saline with EMS or 0.9% saline. After treatments, the colony forming units (CFU) was determined. Data was analyzed by Wilcoxon Rank Sums Test (α = 0.05). One sample per group was scored and split for confocal laser scanning microscopy imaging. There was a significant effect with the use of NaOCl with or without EMS versus 0.9% saline with or without EMS (p = 0.012 and 0.003, respectively). CFUs were lower when using 0.9% saline with EMS versus 0.9% saline alone (p = 0.002). Confocal imaging confirmed CFU findings. EMS with saline has an antibiofilm effect against E. faecalis and can potentially be applied for endodontic disinfection.

The main component of plasma medicine is the use of low-temperature plasma (LTP) as a powerful tool for biomedical applications. LTP generates high reactivity at low temperatures and can be activated with noble gases with molecular mixtures or compressed air. LTP reactive species are quickly produced, and are a remarkably good source of reactive oxygen and nitrogen species including singlet oxygen (O 2 ), ozone (O 3 ), hydroxyl radicals (OH), nitrous oxide (NO), and nitrogen dioxide (NO 2 ). Its low gas temperature and highly reactive non-equilibrium chemistry make it appropriate for the alteration of inorganic surfaces and delicate biological systems. Treatment of oral biofilm-related infections, treatment of wounds and skin diseases, assistance in cancer treatment, treatment of viruses' infections (e.g. herpes simplex), and optimization of implants surfaces are included among the extensive plasma medicine applications. Each of these applications will be discussed in this review article., (Copyright © 2020 Elsevier Inc. All rights reserved.)

The aim of this study is to compare antimicrobial photodynamic therapy (aPDT) against Candida albicans biofilms formed on two different substrates - acrylic resin or bottom of polystyrene plate; and two aPDT application regimens - twice-daily over the course of 48 h or single treatment after 48 h biofilm formation. C. albicans SN425 biofilms cultivated on Roswell Park Memorial Institute medium were incubated for 5 min with toluidine blue O (44 μM) used as a photosensitizer before red light (635 nm; 175.2 J/cm 2 ) exposure for 2 min. As negative control, ultrapure water, and as positive control 0.12% chlorhexidine (CHX) were used. Biofilms were analyzed for colony forming units (CFU) and cells morphology by confocal scanning laser microscopy. Single treatment and twice-daily aPDT on polystyrene plate and single treatment on acrylic resin did not significantly reduce the CFU (p > 0.05); in contrast, twice-daily aPDT on acrylic resin has reduced C. albicans below the detection limit, similarly to CHX treatment. Single aPDT treatment on polystyrene plate and on the resin presented a bulky and homogeneous biofilm predominantly formed by pseudohyphae. In contrast, in the resin group, the biofilm treated twice-daily with aPDT was predominantly formed by yeast cells, whilst pseudohyphae were occasionally visible. In conclusion, biofilms formed on polystyrene plates are more resistant to aPDT than biofilms formed on acrylic resin. Moreover, applying aPDT twice-daily reduces C. albicans biofilm development on acrylic resin and is a better approach against C. albicans biofilms than one single application on the mature biofilm., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Antimicrobial Photodynamic Therapy (aPDT) has been proposed as a means to treat Candida infections. However, microorganisms in biofilms are less susceptible to aPDT than planktonic cultures, possibly because the matrix limits the penetration of the photosensitizer. Therefore, the goals here were: (1) to target biofilm matrix components of a fluconazole-susceptible (S) and a fluconazole-resistant (R) C. albicans (Ca) strains using the hydrolytic enzymes β-glucanase and DNase individually or in combination; (2) to apply the best enzyme protocol in association with aPDT mediated by Photodithazine® (PDZ); (3) to verify under confocal microscope the penetration of PDZ in biofilms pre-treated or not with DNase at different periods of incubation. CaS and CaR 48h-old biofilms were incubated with the hydrolytic enzymes (5 min) and evaluated by cell viability, biomass, and matrix components. DNase showed the best outcomes by significantly reducing extracellular DNA (eDNA) and soluble proteins from the matrix of both strains; and water-soluble polysaccharides from CaR matrix. Subsequently, 48h-old biofilms were incubated with DNase for 5 min, followed by incubation with PDZ for 20 min and exposure to LED light (660 nm, 50 J/cm²). Controls were biofilms treated only with aPDT without DNase, PDZ only, PDZ + DNase, light only, light + DNase, and biofilm without treatment. Pre-treatment with DNase allowed PDZ penetration into deeper biofilm layers, and the aPDT effect was enhanced, showing a significant reduction of the cell viability (p = 0.000) and eDNA amounts (p ≤ 0.047). DNase affected the matrix composition improving the penetration of the photosensitizer, thereby, improving the effectiveness of subsequent aPDT., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Here, we present a protocol to assess the outcomes of per diem red light treatment on the growth of Candida albicans biofilm. To increase the planktonic growth of C. albicans SN425, the inoculums grew on Yeast Nitrogen Base media. For biofilm formation, RPMI 1640 media, which have high concentrations of amino acids, were applied to help biofilm growth. Biofilms of 48 h were treated twice a day for a period of 1 min with a non-coherent light device (red light; wavelength = 635 nm; energy density = 87.6 J·cm -2 ). As a positive control (PC), 0.12% chlorhexidine (CHX) was applied, and as a negative control (NC), 0.89% NaCl was applied to the biofilms. Colony forming units (CFU), dry-weight, soluble and insoluble exopolysaccharides were quantified after treatments. Briefly, the protocol presented here is simple, reproducible and provides answers regarding viability, dry-weight and extracellular polysaccharide amounts after red light treatment.

Phototherapy has been proposed as a direct means of affecting local bacterial infections. However, the use of phototherapy to prevent fungal biofilm development has received comparatively less attention. This study aimed to determine the effects of red light treatment and blue light treatment, without a photosensitizer, on the development of Candida albicans biofilm. During the development of 48-h biofilms of C. albicans SN 425 (n = 10), the biofilms were exposed twice-daily to noncoherent blue and red light (LumaCare; 420 nm and 635 nm). The energy density applied was 72 J cm -2 for blue light and 43.8 J cm 2 , 87.6 J cm 2 , and 175.5 J cm 2 for red light. Positive control (PC) and negative control (NC) groups were treated twice-daily for 1 min with 0.12% chlorhexidine (CHX) and 0.89% NaCl respectively. Biofilms were analyzed for colony forming units (CFU), dry-weight, and exopolysaccharides (EPS-soluble and EPS-insoluble). Data was analyzed by one-way ANOVA and Tukey post hoc test (α = 0.05). Dry-weight was lower than NC (p < 0.001) and approached PC levels with both red and blue light treatments. CFU were also lower in groups exposed to blue light and higher durations of red light (p < 0.05). EPS-soluble and EPS-insoluble measures were variably reduced by these light exposures. In conclusion, twice-daily exposure to both blue and red lights affect the biofilm development and physiology of polysaccharide production and are potential mechanisms for the control of C. albicans biofilm matrix development.

Antimicrobial photodynamic therapy (aPDT) kills several planktonic pathogens. However, the susceptibility of biofilm-derived anaerobic bacteria to aPDT is poorly characterized. Here, we evaluated the effect of Photodithazine (PDZ)-mediated aPDT on Fusobacterium nucleatum and Porphyromonas gingivalis biofilms. In addition, aPDT was tested with metronidazole (MTZ) to explore the potential antimicrobial effect of the treatment. The minimum inhibitory concentration (MIC) of MTZ was defined for each bacterial species. Single-species biofilms of each species were grown on polystyrene plates under anaerobic conditions for five days. aPDT was performed by applying PDZ at concentrations of 50, 75 and 100 mg/L, followed by exposure to 50 J/cm 2 LED light (660 nm) with or without MTZ. aPDT exhibited a significant reduction in bacterial viability at a PDZ concentration of 100 mg/L, with 1.12 log 10 and 2.66 log 10 reductions for F. nucleatum and P. gingivalis in biofilms, respectively. However, the antimicrobial effect against F. nucleatum was achieved only when aPDT was combined with MTZ at 100× MIC. Regarding P. gingivalis, the combination of PDZ-mediated aPDT at 100 mg/L with MTZ 100× MIC resulted in a 5 log 10 reduction in the bacterial population. The potential antimicrobial effects of aPDT in combination with MTZ for both single pathogenic biofilms were confirmed by live/dead staining. These results suggest that localized antibiotic administration may be an adjuvant to aPDT to control F. nucleatum and P. gingivalis biofilms., (Copyright © 2018. Published by Elsevier B.V.)

Background : Fluconazole (FLZ) is a drug commonly used for the treatment of Candida infections. However, β-glucans in the extracellular matrices (ECMs) hinder FLZ penetration into Candida biofilms, while extracellular DNA (eDNA) contributes to the biofilm architecture and resistance. Methods : This study characterized biofilms of FLZ-sensitive (S) and -resistant (R) Candida albicans and Candida glabrata in the presence or absence of FLZ focusing on the ECM traits. Biofilms of C. albicans American Type Culture Collection (ATCC) 90028 (CaS), C. albicans ATCC 96901 (CaR), C. glabrata ATCC 2001 (CgS), and C. glabrata ATCC 200918 (CgR) were grown in RPMI medium with or without FLZ at 5× the minimum inhibitory concentration (37°C/48 h). Biofilms were assessed by colony-forming unit (CFU)/mL, biomass, and ECM components (alkali-soluble polysaccharides [ASP], water-soluble polysaccharides [WSP], eDNA, and proteins). Scanning electron microscopy (SEM) was also performed. Data were analyzed by parametric and nonparametric tests ( α   =  0.05). Results : In biofilms, FLZ reduced the CFU/mL of all strains ( p  < 0.001), except for CaS ( p  = 0.937). However, the ASP quantity in CaS was significantly reduced by FLZ ( p  = 0.034), while the drug had no effect on the ASP levels in other strains ( p  > 0.05). Total biomasses and WSP were significantly reduced by FLZ in the ECM of all yeasts ( p  < 0.001), but levels of eDNA and proteins were unaffected ( p  > 0.05). FLZ affected the cell morphology and biofilm structure by hindering hyphae formation in CaS and CaR biofilms, by decreasing the number of cells in CgS and CgR biofilms, and by yielding sparsely spaced cell agglomerates on the substrate. Conclusion : FLZ impacts biofilms of C. albicans and C. glabrata as evident by reduced biomass. This reduced biomass coincided with lowered cell numbers and quantity of WSPs. Hyphal production by C. albicans was also reduced.

Purpose: The goal of this study was to develop and validate a standardized in vitro pathogenic biofilm attached onto saliva-coated surfaces., Methods: Fusobacterium nucleatum (F. nucleatum) and Porphyromonas gingivalis (P. gingivalis) strains were grown under anaerobic conditions as single species and in dual-species cultures. Initially, the bacterial biomass was evaluated at 24 and 48 hours to determine the optimal timing for the adhesion phase onto saliva-coated polystyrene surfaces. Thereafter, biofilm development was assessed over time by crystal violet staining and scanning electron microscopy., Results: The data showed no significant difference in the overall biomass after 48 hours for P. gingivalis in single- and dual-species conditions. After adhesion, P. gingivalis in single- and dual-species biofilms accumulated a substantially higher biomass after 7 days of incubation than after 3 days, but no significant difference was found between 5 and 7 days. Although the biomass of the F. nucleatum biofilm was higher at 3 days, no difference was found at 3, 5, or 7 days of incubation., Conclusions: Polystyrene substrates from well plates work as a standard surface and provide reproducible results for in vitro biofilm models. Our biofilm model could serve as a reference point for studies investigating biofilms on different surfaces., Competing Interests: Conflict of Interest: No potential conflict of interest relevant to this article was reported.

Background : Infections caused by Candida spp. have been associated with formation of a biofilm, i.e. a complex microstructure of cells adhering to a surface and embedded within an extracellular matrix (ECM). Methods : The ECMs of a wild-type (WT, SN425) and two Candida albicans mutant strains, Δ/Δ tec1 (CJN2330) and Δ/Δ efg1 (CJN2302), were evaluated. Colony-forming units (cfu), total biomass (mg), water-soluble polysaccharides (WSPs), alkali-soluble polysaccharides (ASPs), proteins (insoluble part of biofilms and matrix proteins), and extracellular DNA (eDNA) were quantified. Variable-pressure scanning electron microscopy and confocal scanning laser microscopy were performed. The biovolume (μm 3 /μm 2 ) and maximum thickness (μm) of the biofilms were quantified using COMSTAT2. Results : ASP content was highest in WT (mean ± SD: 74.5 ± 22.0 µg), followed by Δ/Δ tec1 (44.0 ± 24.1 µg) and Δ/Δ efg1 (14.7 ± 5.0 µg). The protein correlated with ASPs ( r  = 0.666) and with matrix proteins ( r  = 0.670) in the WT strain. The population in Δ/Δ efg1 correlated with the protein ( r  = 0.734) and its biofilms exhibited the lowest biomass and biovolume, and maximum thickness. In Δ/Δ tec1, ASP correlated with eDNA ( r  = 0.678). Conclusion : ASP production may be linked to C. albicans cell filamentous morphology., Competing Interests: No potential conflict of interest was reported by the authors.