Search

As a way to reduce microplastics or nano-plastics in the ocean, it is of interest to develop biodegradable paper-based drinking straws to replace non-degradable plastic drinking straws. Primary questions to be addressed include how to design suitable coatings for paper drinking straws. Such coatings not only need to resist water. In addition, consumers have high expectations for the strength of a drinking straw. It is proposed here to replace non-biodegradable polypropylene, which is presently the main component of straws, with biodegradable and hydrophobic coating components via an entropy-driven approach. It is further proposed to develop colored paper-based drinking straws with cellulose nematic liquid crystal photonic pigments as a way to make the product stand out visibly, while at the same time mediating the usage of toxic chemical pigments. [ABSTRACT FROM AUTHOR]

The US and the EU have adopted contrasting pathways in their pursuit of increased sustainability. This editorial highlights such contrasts with respect to paper and nonwovens products. The American way, at least at the federal level, depends on consumer input, which can have an impact on corporate decisions and practices. Progress with respect to sustainability in the European Union has a higher reliance upon regulations. Each approach has merits as well as deficiencies. A regulation-dependent approach sometimes just moves problems to other parts of the world. A consumer-driven approach does not have a good way to deal with a need for systematic change, such as systems to recycle textile and nonwoven materials. It follows that a combined approach, involving both consumer demand and regulations, can be recommended as a most effective path forward. In addition, applications of artificial intelligence have potential to reconcile societal needs with future industrial practices. [ABSTRACT FROM AUTHOR]

Cellulose-based fibers are desirable materials for nonwoven wipes for their good absorbency, strength, cleaning, and biodegradable properties. However, quaternary ammonium compounds (QACs), being cationic in nature, show electrostatic interactions with anionic cellulosic fibers, reducing the available QACs to efficiently clean surfaces. This research presents sustainable alternative fibers that show better controlled exhaustion than commercial wipes and textile fibers. Textile and lignocellulosic fibers were prepared, soaked in QAC, and a UV–vis spectrophotometer was used to measure their exhaustion percentages. Factors such as immersion time and concentration of the disinfectant were also investigated, which affect the rate of exhaustion of the disinfectant from the fibers. A higher immersion time resulted in better exhaustion, whereas the total exhaustion decreased with an increase in the initial concentration of the disinfectant. The exhaustion of benzalkonium chloride (BAC) from the commercial wipes was also investigated at different immersion times and BAC concentrations. It was found that the wood and non-wood fibers showed more controlled exhaustion than the textile fibers and commercial wipes, and could be considered an alternative option for renewable and sustainable wipes and hygiene products. [ABSTRACT FROM AUTHOR]

The degree of crystallinity in cellulose significantly affects the physical, mechanical, and chemical properties of cellulosic materials, their processing, and their final application. Measuring the crystalline structures of cellulose is a challenging task due to inadequate consistency among the variety of analytical techniques available and the lack of absolute crystalline and amorphous standards. Our article reviews the primary methods for estimating the crystallinity of cellulose, namely, X-ray diffraction (XRD), nuclear magnetic resonance (NMR), Raman and Fourier-transform infrared (FTIR) spectroscopy, sum-frequency generation vibrational spectroscopy (SFG), as well as differential scanning calorimetry (DSC), and evolving biochemical methods using cellulose binding molecules (CBMs). The techniques are compared to better interrogate not only the requirements of each method, but also their differences, synergies, and limitations. The article highlights fundamental principles to guide the general community to initiate studies of the crystallinity of cellulosic materials. [ABSTRACT FROM AUTHOR]

Surface treatments of cellulose triacetate (CTA) films via atmospheric pressure plasmas containing helium and either O2 or C3F6 as plasma reactive gas were performed to study their effects on moisture barrier, transmittance, thermal, surface chemistry, and morphological properties. Plasma treated CTA films were characterized using X-ray photoelectron spectroscopy (XPS), attenuated total reflectance-Fourier transform infrared spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy analytical techniques. Both surface chemical and morphological changes were correlated with water vapor transmission rates (WVTRs) and contact angle measurements. XPS spectra showed that the relative chemical composition of the C 1s spectra after O2 plasma treatments exhibits an increase in the relative amount of C--C bonds, which may be due to a change in surface cross-linking. ToF-SIMS spectra showed the depth of treatment of atmospheric plasma treatment of CTA films at about 100 nm. The WVTR of the CTA film was reduced up to 20% after sustainable atmospheric O2/helium plasma, while no significant changes were observed in light transmittance. Thus, the use of sustainable atmospheric plasmas to enhance moisture barrier while maintaining other critical properties such as light transmittance, thermal stability, and morphology of a CTA film could provide significant benefits to the electronics industry. [ABSTRACT FROM AUTHOR]