Search

Copyright of Contemporary Accounting Research is the property of Canadian Academic Accounting Association and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper provides novel empirical insights into the Porter hypothesis (PH) and its dynamic nature. The PH posits that well-designed environmental regulations induce eco-innovations at polluting firms that improve both their environmental and business performance via 'innovation offsets.' We conduct an econometric test of this proposition, using Swedish pulp and paper plants as empirical application. Swedish environmental regulation of polluting industries provides an interesting case because it has been praised, due to containing elements of 'well-designed' regulations, for being conducive to accomplishing the 'win-win' situation of mutual environmental and economic benefits. The empirical results indicate that flexible and dynamic command-and-control regulation and economic incentive instruments have induced innovation offsets through improved energy efficiency. Our study bears important implications: empirical tests of the PH that do not account for its dynamic nature, and that do not measure 'well-designed' regulations, might provide misleading conclusions as to its validity. [ABSTRACT FROM AUTHOR]

Abstract This study aims at to make a heuristic analysis of energy efficiency performance of Indian paper industry in a non-parametric production theoretic approach. Using the data for 2004–05 to 2013–14, radial and non-radial variants of DEA were employed to estimate energy saving potential and identify the relative position of paper industry across the states. Preliminary analysis in terms of energy intensity scores showed declining trends of energy intensity over the period of analysis for most of the states except states like Assam, Chhattisgarh, Kerala and Punjab where it does not decline much. Assuming a variable returns to scale (VRS) technology under the conditions of inherent heterogeneity and market imperfection, the slack-based measure (SBM) reported a much higher energy saving potential than reported by other measures in the study. Further by taking scale efficiency into account, the study documented the higher contribution of pure energy inefficiency in explaining the total energy inefficiency within the paper industry relative to scale inefficiency. Finally, the study recommends the propagation of energy efficiency program through a market-based and regulatory mechanism along with consolidation and technological advancement of individual units, in order to tap vast energy saving potential and thereby ensure the growth and environmental sustainability. Highlights • The paper examined the energy efficiency performance of Indian paper industry. • Both radial (BCC) and the non-radial (SBM) measures of energy efficiency, were applied. • BCC measure reported an energy saving potential of 16%. • SBM measure reported an energy saving potential of 24%, higher than BCC measure. • Scale efficiency implied the relatively higher contribution of pure energy inefficiency. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Hemicelluloses are heteropolysaccharides existing in plant cell wall and seed, and they can be extracted or separated from plants as byproducts during the biomass pretreatment in biorefineries and the pulping in paper industry. The hemicelluloses have many applications such as in biofuels, platform chemicals, and materials. Producing packaging materials (films) is a potential high-value application of the hemicelluloses. However, native hemicelluloses are usually unable to form strong and durable films due to their short chain (low molecular weight), high hydrophilicity, and heterogeneous nature. Chemical and biological modifications could change the physicochemical properties of the hemicelluloses and thereby improve the strength and performance of the hemicellulose-based films. The present review extensively summarized and discussed the recent development and progress in hemicellulose modification strategies and methods for improving the formability and properties of the hemicellulose-based packaging films such as mechanical strength, processability, thermal stability, hydrophobicity, and oxygen and water vapor permeability, which include enzymatic treatment, esterification, etherification, oxidation, coupling, and crosslinking. The challenges and opportunities of hemicellulose as packaging materials were addresses. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine the effect of electrical conductivity, pH and temperature which were kept constant during treatment via an advanced control strategy on chemical oxygen demand, color, turbidity and total suspended solids removal and energy consumption. Central Composite Design matrices were formed for aluminum and iron electrode systems separately with different combinations of 5 independent variables (electrical conductivity, pH, temperature, current intensity and electrolysis time). Obtained results revealed that aluminum electrode system was found to be more effective than iron electrode system under controlled conditions. Comparison of uncontrolled and controlled studies at optimum values of aluminum electrode system showed an increase by 31.67% in chemical oxygen demand removal and a decrease by 48.30% in energy consumption under controlled case. Results indicated that constant electrical conductivity, pH and temperature during electrocoagulation process of pulp and paper mill wastewater by means of a controller enhanced treatment efficiency. [ABSTRACT FROM AUTHOR]

The aim of this paper is to offer an exploratory review of the sustainability agendas and achievements reported by the leading companies within the global forest, paper and packaging industry. The paper begins with brief outlines of corporate sustainability and the growing interest in sustainability reporting. The empirical material for the paper is drawn from the most recent sustainability reports posted on the leading forest, paper and packaging companies' corporate websites. The findings reveal while the leading companies within the industry recognised the impacts their businesses have on the environment, on society and to a lesser extent on the economy, there are variations in the character, extent and detail of the sustainability reporting process. That said the sustainability reports included details of a wide range of environmental, social and economic issues but more generally the reports had a number of weaknesses that, at least partly, undermine their transparency and credibility. The authors also argue that the selected companies' definitions of, and commitments to, sustainability are principally driven by business imperatives rather than by any fundamental concern to maintain the viability and integrity of natural and social capital. More critically the authors argue that this approach is couched within existing business models centred on continuing growth. The paper provides an accessible review of current approaches to sustainability in the global forest, paper and packaging industry and as such it will interest professionals working in the industry and its supply chain as well as academics and students interested in business strategy and sustainability. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

Recently, it was indicated that a feasible industrial alternative to valorize the sludge obtained from the treatment of waste water effluent of paper fabrication in Europe is its use as raw material in the production of clay bricks. The present technical note is an open report, probably first in Americas, on a Brazilian industrial-scaled solution for this kind of sludge. As a novelty, the sludge was added to a mixture of clays for improved technical properties of construction bricks. Both bricks, added with 10 wt% of sludge and conventional pure clay bricks for comparison, were simultaneously fired at a relatively low temperature of 750 °C according to the ceramic fabrication procedure. The technical characterization was performed by linear shrinkage, water absorption and mechanical compression tests as per Brazilian standards. The brick consolidated structure was analyzed by optical microscopy. Environmental impact was evaluated by solution test and atmospheric emission by monitoring the release of SO 2 , NO x , TOC, CO and particulate material, according to Brazilian standards. The results showed that, owing to its composition and firing temperature, the addition of paper sludge into clay bricks contributes to a substantial reduction in price associated with a saving of 3% of fuel similar to that reported for Spanish kilns, during the industrial firing stage. The paper sludge added clay bricks attended the technical and environmental standards. [ABSTRACT FROM AUTHOR]

Lime mud is a kind of solid waste in the papermaking industry, which has been a source of serious environmental pollution. Ceramsites containing anorthite and gehlenite were prepared from lime mud and fly ash through the solid state reaction method at 1050°C. The objective of this study was to explore the efficiency of Ca 2 + and OH − release and assess the phosphorus and copper ion removal performance of the ceramsites via batch experiments, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Ca 2 + and OH − were released from the ceramsites due to the dissolution of anorthite, gehlenite and available lime. It is also concluded that gehlenite had stronger capacity for Ca 2 + and OH − release compared with anorthite. The Ca 2 + release could be fit well by the Avrami kinetic model. Increases of porosity, dosage and temperature were associated with increases in the concentrations of Ca 2 + and OH − released. Under different conditions, the ceramsites could maintain aqueous solutions in alkaline conditions (pH = 9.3–10.9) and the release of Ca 2 + was not affected. The removal rates of phosphorus and copper ions were as high as 96.88% and 96.81%, respectively. The final pH values of both phosphorus and copper ions solutions changed slightly. The reuse of lime mud in the form of ceramsites is an effective strategy. [ABSTRACT FROM AUTHOR]

The interactive effects of influent chemical oxygen demand (CODin), hydraulic retention time (HRT), and temperature on the performance of an upflow anaerobic sludge blanket reactor, operated in continuous mode, were studied for the anaerobic biodegradation of bagasse effluent from pulp and paper industry. Experiments were conducted based on Box–Behnken design and analyzed using response surface methodology. CODin(4,400–6,800 mg/l), HRT (15–27 h), and temperature (20–40°C) were the operating variables considered for this study. Three dependent parameters viz., percentage of COD removal, COD removal rate, and biogas production were either directly measured or calculated as response. Analysis of variance showed a high coefficient of determination value (R2) of 0.9990 for percentage COD removal, 0.9960 for COD removal rate, and 0.9953 for biogas production thus ensuring a satisfactory fit of the second-order polynomial regression model with the experimental data. Maximum values of percentage COD removal (84.3%), COD removal rate (230.9 mg/l h), and biogas production (21.2 l/d) were observed at optimum CODin, HRT, and temperature of 6212 mg/l, 23 h, and 35°C, respectively. [ABSTRACT FROM PUBLISHER]

A simple framework to estimate the potential of solar industrial process heating (SIPH) and corresponding CO 2 emissions mitigation in paper industry in India is presented. Geographical locations with clusters of paper mills have been identified and the annual process heating requirement for paper production (based on raw material use) at each cluster has been estimated. The total process heating potential for the paper industry in India has been estimated at 25.2 PJ/annum. Using the estimated performance of a commercially available parabolic trough based SIPH system with collector area requirement of 1.11 million m 2 annual solar fraction in the range of 0.25–0.30 have been estimated. Annual energy delivery of SIPH systems estimated at 4.34 PJ per annum. Finally at 8 main locations with clusters of paper mills in India considered in this study, adoption of SIPH without storage is expected to mitigate 0.34 million tonnes of CO 2 emissions annually. [ABSTRACT FROM AUTHOR]

The paper industry is one of the most significant industrial branches that contributes to water pollution. Recent studies regarding the chemical composition of wastewaters from modern paper production sites are sparse, and organic contaminants originating from this source may remain undetected and uncontrolled. Therefore, for this study, non-target screening analyses of wastewaters from five different paper production sites were performed, including an extended analysis of one facility, for the identification of volatile non-polar to semi-polar organic contaminants. The identified contaminants were also traced in the adjacent river. Several specific agents related to paper production, including photoinitiators, ink and thermal paper constituents, were present in most wastewaters and were therefore considered to be characteristic paper industry contaminants. A couple of contaminants identified in this study are being reported for the first time and might be toxic, but have been neglected in previous studies. Bisphenol A and 2,4,7,9-tetramethyl-5-decyne-4,7-diol were found in untreated wastewaters, treated wastewater and in river water. Bisphenol A was present in river water downstream from where the paper industry discharges at a concentration that was reported to affect the reproduction of gastropods. Thus, our findings imply that paper industry discharges pose a risk to the populations of sensitive macroinvertebrates. [ABSTRACT FROM AUTHOR]

Although the dioxin alarm broke at the same time in Sweden and the US in the mid-1980s, Swedish pulp and paper (P&P) firms led the way towards the new market for low-chlorine and chlorine-free P&P products. This study explores the transition in the Swedish P&P industry and contrasts the Swedish case to the US experience. We highlight the importance of already established technological paths to deal with pollution, paths which were strongly formed by the different national environmental policies since the 1970s. Thus while US P&P firms were technologically locked-in when the dioxin alarm broke, the strategy of Swedish P&P firms to proactively collaborate in environmental research and development (R&D) together with a national policy that favoured process integrated abatement technology, helped Swedish firms take technological leadership. This article particularly stresses the implications of technological path-dependency and different national regulatory styles in understanding the evolution of different modes of corporate environmental strategies. [ABSTRACT FROM AUTHOR]

Since the bleaching process is one of the most important environmental pollutant stages in the pulp and paper industry, here, the total chlorine-free (TCF) bleaching of poplar kraft pulp by applying Oxone and peroxide under alkaline conditions has been investigated. The pulp samples were bleached in two stages of Oxone (OX) treatment using an AOX1OX2 sequence (A: acid pretreatment), and then the treated pulps were bleached by peroxide (P) to achieve target brightness (about 80%). The influence of various reaction parameters such as alkali charge, temperature, reaction time, and bleaching agent dosage was optimized. The final achieved brightness was more than 78%. Accelerated aging experiments showed more stability in brightness for the Oxone treated pulp, because alkali Oxone bleaching stops thermal degradation. Similarly, the AOX1OX2P bleaching sequence was found to be effective in regaining some strength that had been lost during acidification of the pulp. Improvement in pulp strength made with acid treatment was achieved along with significant amount of lignin removal and it demonstrates the feasibility of Oxone in TCF bleaching. Furthermore, other results indicated the feasibility of Oxone bleaching as an environmentally favorable alternative TCF bleaching sequence, compared with elemental chlorine-free bleaching approaches and also other TCF bleaching sequences. [ABSTRACT FROM AUTHOR]

This article is grounded in the theoretical framework of technological change or radical innovation, which is anchored in an evolutionary dynamics perspective. In this context, the study specifically tackles the strategies of eco-innovations, defined as innovations with an emphasis on sustainable development, resulting in its entire life cycle, in decreased environmental risk, pollution, and other negative impacts of resources use, when compared to the existing alternatives. The general objective was analyzing the relationships between contextual factors internal to organizations and the adoption of proactive and reactive strategies for eco-innovation, focusing on the sector of pulp, paper, and paper products. The methodological approach is quantitative, through cross-sectional survey with self-applied questionnaires answered by 117 companies. For data analysis, inferential statistics by Pearson's correlation coefficient and determination was used. The main results show that there was a significantly positive relationship between top management support, technological competence, and environmental formalization, by defining proactive eco-innovation strategies. This corroborates, to some extent, the existing theory that these factors drive proactive strategies in an effective way. With these results, it may be claimed that this study contributes to increase knowledge in the area of eco-innovation strategies, by defining the variables of constructs and tests of hypotheses, as well as it contributes both to the existing theory and to the management of eco-innovations in the organizations, having a potential to serve as a guide in providing an innovative approach to environmental management of companies in the sector and in other sectors. Its originality lies on the fact that it is a study specifically designed and applied in an empirical way, providing information on the management of eco-innovation, on drivers and effects, enabling detailed analyses, which are regarded as gaps in the literature. [ABSTRACT FROM AUTHOR]

This paper presents a life cycle assessment (LCA) of bleached eucalyptus kraft pulp production in Brazil. The entire production system was investigated, starting with forestry and ending with bleached pulp at the gate of the pulp mill. Alternative bleaching sequences were compared for three different scenarios using somewhat different elemental chlorine-free (ECF) sequences: Dhot(EPO)DD, Dhot(EPO)DP, and aZeDP. The main difference between the scenarios investigated was the magnitude of the carbon footprint contribution from bleaching. For the base case and chemical island scenarios (both reflecting Brazilian conditions), the contribution was 15%-18% of the total carbon footprint. For the ecoinvent scenario, the corresponding share was 34%-41%. The ecoinvent scenario represents generic LCA data for bleaching chemicals. Ecoinvent is a public database commonly included in commercial LCA software. For each scenario, the alternative bleaching sequences studied resulted in similar carbon footprints of the bleached pulp. A comparison of the data from the different scenarios showed a large range of carbon footprints for the chemicals used for pulp bleaching. It is crucial to select data sets that are relevant in terms of geography and technology. The most dominant contributors to the carbon footprint of the unbleached pulp were forestry and pulp production. Although the focus has been on carbon footprints, the contributions to other environmental effects commonly included in LCAs were also assessed and only minor differences between the alternative bleaching sequences were found. Application: This study shows how LCA can be applied to assess environmental impacts in the pulp and paper industry. Knowledge about the magnitude of the contributions made by the different parts of the value chain is useful as a basis for further improvements to reduce the environmental footprint. [ABSTRACT FROM AUTHOR]

Copyright of Fibres & Textiles in Eastern Europe is the property of Sciendo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Recent studies have shown that dehydroabietic acid (DHAA), a resin acid present in pulp and paper mill effluent, affects liver energy metabolism and may have anti-estrogenic effects in fish. A chronic-exposure toxicity experiment using immature rainbow trout (Oncorhynchus mykiss) was conducted in order to assess the endocrine disrupting and liver metabolic effects of the model estrogen 17β-estradiol (E2) and the wood extractives DHAA and β-sitosterol (BS), regularly present in pulp and paper mill effluents. Exposure to 5ppm of E2 significantly increased hepatosomatic index (HSI), vitellogenin (VTG) and plasma sorbitol dehydrogenase (SDH). This latter effect was reduced by mixing E2 with DHAA, indicating that DHAA does not cause its endocrine disrupting effects indirectly due to liver damage. Exposure to 0.5ppm of DHAA as well as all the DHAA mixed treatments caused significant increases in liver citrate synthase (CS), activity after 7 days, however, the fish returned to control values by 28 days. Results indicate that DHAA may alter metabolic enzyme activity as well as alter the effects of E2 in juvenile rainbow trout. [Copyright &y& Elsevier]

Purpose: The environmental aspects of paper as a consumer good have been extensively studied. However, the paper machine has been mostly neglected in the literature. The purpose of this article is to present a LCA case study that explicitly focuses on the system of a newsprint paper machine and its environmental impacts and not on the system of the consumer good paper. The relevance of the paper machine as capital equipment is analyzed, and conclusions for the environmental improvement of paper machines are drawn based on identified hotspots. The article hereby answers the more general research questions of whether capital equipment has rightly been neglected in other studies regarding pulp and paper and which impact categories are important for analyzing the environmental burdens of a paper machine. Methods: The study has been executed in collaboration with Voith Paper, an original equipment manufacturer. Hence, in distinction to literature-based studies, primary data on the paper machine was available resulting in a high overall data quality. Based on the ISO 14040 () and 14044 () standards, this article pursues a cradle-to-grave approach for the paper machine. It assesses the environmental impacts in the impact categories defined by the ReCiPe impact assessment methodology. Different types of energy generation are examined in a scenario analysis with combined heat and power generation (CHP) as the baseline case. For interpretation, a normalization and a sectoral analysis are performed. Results and discussion: The normalized results indicate fossil resource depletion and global warming as the most important impact categories. Global warming impacts are highly dependent on the energy processes and result to 432.7 kg CO2e per production of 1 t of paper for CHP and to 701.7 kg CO2e for EU25 grid mix. The sectoral analysis shows that the machinery's operations/use phase is clearly dominating most impact categories due to its long lifetime. An exception is the metal depletion, for which the materials and manufacturing processes are most important. Conclusions: These findings prove that for most categories, the operations/use phase of the paper machine is the most important life cycle stage. In systems focusing on the consumer good paper, it is therefore sufficient to model the operation of the paper machine, whereas the manufacturing, transport, and end-of-life processes regarding the paper machine equipment can be neglected, unless metal depletion is important to the study. [ABSTRACT FROM AUTHOR]

Abstract: The obnoxious odors generated from pulp and paper industries have been the cause of nuisance since the instigation of these industries. The objective of the study was to develop a metal oxide sensor based electronic nose for rapid measurement of odorant concentration and associated odor intensity of major reduced sulfur compounds emitted from different sources of these pulp and paper mills. The gas samples collected from the surroundings of major source points of industry were exposed to sensor array of the electronic nose and the change in voltage was measured and taken to PC through data acquisition cards. The same sets of samples were also tested with gas chromatography. The results of electronic nose and GC-FPD were correlated using response surface methodology to know the odorant concentration. The model fed with unknown industrial samples had more than 95% prediction capability. To determine odor intensity by electronic nose firstly a collective index was generated using SVD based 2-norm method (e-nose index) proportional to the sensors response relative to reference gas, methyl mercaptan. Secondly the e-nose index was associated with human expert evaluations. The training of the electronic nose enabled it to predict odorant concentration found at the industrial site and associated odor intensity in methyl mercaptan equivalent. The overall results of the experiments carried out suggest the potential of electronic nose as a device for on or off line measurement of odorant concentration and odor intensity. [Copyright &y& Elsevier]

A lab-scale granular activated carbon sequencing batch biofilm reactor (GAC-SBBR), a combined adsorption and biological process, was developed to treat real wastewater from a recycled paper mill. In this study, one-consortia of mixed culture (4000–5000 mg/L) originating from recycled paper mill activated sludge from Kajang, Malaysia was acclimatized. The GAC-SBBR was fed with real wastewater taken from the same recycled paper mill, which had a high concentration of chemical oxygen demand (COD) and adsorbable organic halides (AOX). The operational duration of the GAC-SBBR was adjusted from 48 h to 24, 12 and finally 8 h to evaluate the effect of the hydraulic retention time (HRT) on the simultaneous removal of COD and AOX. The COD and AOX removals were in the range of 53–92% and 26–99%, respectively. From this study, it was observed that the longest HRT (48 h) yielded a high removal of COD and AOX, at 92% and 99%, respectively. [Copyright &y& Elsevier]

The most prominent environmental problems facing the paper industry are those due to bleaching processes that use chlorine compounds. In this study, totally chlorine free (TCF) bleaching sequences were applied to Phyllostachys bambusoides bamboo unbleached kraft anthraquinone (AQ) pulp, using different conditions with Oxygen (O) delignification and Sodium Perborate Tetrahydrate (SPBTH) stages. The effects of oxygen pressure, SPBTH ratio, and bleaching time were studied to maximize the brightness gain at the lowest viscosity loss. Unbleached kraft-AQ bamboo pulp was applied to first stage oxygen delignification for bleaching with under 5 bar, 3% NaOH, and 12% concentration conditions. Following the chelated bleaching, Sodium Perborate Tetrahydrate (SPBTH) bleaching was carried out as the final stage. The optimum bamboo kraft pulp bleaching conditions were SPBTH level: 4%, MgSO4: 0.5%, Na2SiO3: 3%, bleaching time: 80 min., reaction temperature: 70°C, and concentration: 12%. An overall increase in the physical properties of paper was evident up to an SPBTH level of 4%. When the SPBTH level and bleaching time increased, the kappa number, viscosity, opacity, and yellowness were decreased, but the brightness was increased. Oxygen delignification with chelatation and SPBTH as a bleaching sequence was shown to be a promising alternative to produce high-quality pulp from bamboo for cleaner paper. [ABSTRACT FROM AUTHOR]

The treatment of wastewater from a pulp and paper mill plant using electrochemical methods was performed at a laboratory bench-scale at ambient temperature (∼30 °C). The effects of wastewater dilution (10- to 100-fold), circulating water flow rate (0–3.95 l/min), current density (1.90–3.80 mA/cm2) and sodium chloride concentration (0–3.75 g/l) were ascertained. The results demonstrated that this methods can facilitate the disappearance of the oxidative coupling unit of lignin as well as other organic and inorganic compounds, measured in terms of the removal of color, total biological- and total chemical oxygen demand (BOD and COD), and the total suspended and dissolved solids (TSS and TSD). In addition, the electrochemical method was more effective at reducing the pollutant levels, produced a smaller quantity of low-density sludge and had a low operating cost per unit quantity of COD. After optimization, the electrochemical method operating in a batch mode enhanced the removal of color, BOD and COD at around 98%, 98% and 97%, respectively, whilst in a continuous mode at the steady state condition (8 h after the start-up time) the color, BOD and COD levels were reduced by around 91%, 83% and 86%, respectively. [Copyright &y& Elsevier]

Industrial sector is the largest user of energy in India and many parts of the world. More than half of the total energy is used in industries to operate various energy-using machineries. Energy conservation is a cost-effective approach in any energy optimization program that can be implemented in industrial activities. Energy-intensive industries in developing economies offer significant energy-saving potential owing to the technology gap as well as lower operating efficiency. A detailed energy flow analysis was conducted in a paper carton manufacturing unit in India to quantify the energy-saving potential. The study revealed that the compressed air leakage is responsible for about 50% of the total energy loss. The specific electrical and thermal energy consumption was estimated and found to be 91.85 kWh/ton and 1,619 MJ/ton of biomass, respectively. Annual energy saving potential was found to be 5.9% of the total annual energy consumption. The cost of DG power is found to be 389% higher than the grid power. The share of self-generated DG power is estimated to be 41% of the total power consumed. Electrical energy intensity of the plant could be reduced by 6.36% implementing energy conservation measures proposed in this study. [ABSTRACT FROM AUTHOR]

Abstract: Currently there are several methodologies available for estimating the carbon footprint of products. In this study a comparison has been made between the outcomes and the implications of three different methodologies applied to office paper: (1) the ISO 14040/14044 standards limited to the analysis of greenhouse gas (GHG) emissions and the corresponding impact category global warming; (2) the PAS 2050; and (3) the Confederation of European Paper Industries (CEPI) framework. The carbon footprint of office paper from cradle-to-costumer is 4.64, 4.74 and 4.29gCO2eq per A4 sheet according to, respectively, the ISO 14040/14044 standards, the PAS 2050 and the CEPI framework. The ISO 14040/14044 standard methodology allows the quantification of 98% of the total GHG emissions with the smallest effort in data collection. The major hot spots are the stages of eucalypt pulp and office paper production and chemical and fuel production for all methodologies. General methodologies such as those analysed in this study are not enough for the comparison of products. More specific rules, such as Product Category Rules, that limit the degree of freedom in the choice of the functional unit, system boundary, allocation rules, data quality, between others, should be developed. [Copyright &y& Elsevier]

Greenhouse gas (GHG) emissions of the Quebec pulp and paper industry fell by more than 30 percent from 1990 to 2006. We use an energy demand model to analyze the contributions to this decrease of energy prices, product mix, technological change, and biomass use. The product mix is made of pulp, and cardboard, and paper. Pulp is an intermediate product for the industry, but not necessarily so for mills; vertical integration varies across mills and presents different opportunities to transfer heat between stages of production. Chemical and mechanical pulping processes are used to form two groups of pulp and paper mills. We find that changes of product mixes contributed the most to reduce GHG emissions, followed to a lesser extent by increases of fuel prices relative to electricity. The estimated electricity and fuel price elasticities are low. However it is still possible to significantly reduce GHG emissions by substituting natural gas for heavy fuel oil; such a substitution could be brought about by a small change of their relative price. [ABSTRACT FROM AUTHOR]

Air pollution has become a serious concern throughout the world and countries are implementing measures to reduce air pollution. This study evaluated the compliance of emissions such as sulphur dioxide, particulate matter and nitrogen dioxide, by a paper industry. The ambient concentrations resulting from these emissions with the minimum emissions limits and ambient air quality standards stipulated by the environmental agency were also studied. Stack sampling and testing were conducted to quantify the emissions while dispersion modelling principles were used to predict ambient concentrations. It was found from the simulation of the modelling results that compliance with minimum emissions limits was very poor with regards to particulate matter and also proving to be worse when tighter limits become effective in 2016. However, sulphur dioxide and nitrogen dioxide emissions were found to comply currently but sulphur dioxide compliance will likely drop to less than 40% when the new limit becomes effective. With regards to ambient concentrations of these pollutants, it was found that full compliance can be attained during the day but when the wind speed drops at night, to below 4 m/s, the particulate matter, sulphur dioxide and nitrogen dioxide respectively, compliance with ambient air quality standards will drop. [ABSTRACT FROM AUTHOR]

We are witnessing an explosion in carbon calculators for estimating the greenhouse gas (GHG) emissions (i.e., carbon footprint) of households, buildings, cities, and processes. Seeking to capitalize on the emergent 'green' consumer, corporations are leading the next iteration in carbon footprinting: consumer products. This potentially lucrative low-carbon frontier, however, faces steep challenges due to complexities of scale, largely a function of the number of actors and geographies involved in globalized commodity and energy networks, and scope, which increasingly demands inclusion of emissions due to land use change (e.g., biofuel production, timber harvest, livestock grazing, mining). Life cycle assessment (LCA)-the principal method behind product-level GHG emissions footprint protocols-frequently avoids these challenges by narrowly delineating system boundaries, thereby excluding the 'messiness' of space and place. Through a comparative model of energy sources and emissions in the globalized paper industry, this article reveals how complexities associated with geographic variation and land use change create indeterminacy in footprints based on these protocols. Using industry and trade data, the authors develop geographic information system transportation and energy models to map the globally dispersed pulp supply networks and to rescale Intergovernmental Panel on Climate Change GHG inventory guidelines to include carbon loss associated with land use change in the carbon footprint of coated paper. Given their integrative abilities to conceptualize and model coupled human-ecological systems, sophisticated understanding of time-space dynamics and critical theoretical insights, geographers have much to contribute to the LCA and product carbon footprinting enterprise, which to date has been largely the intellectual domain of engineers. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is under increasing pressure to reduce its energy consumption and impact on the environment. The 'Cleaner Production' (CP) approach has been widely utilised as a tool to meet environmental concerns by industry. However, because of the high initial capital cost of CP implementation, it is important to develop a model for prioritisation. In this paper, using analytic hierarchy process methodology, a tree-level hierarchy model was structured to facilitate the prioritisation process in the Kaveh Papermaking Company located in Iran. Using a literature review and field study, the proposed model can provide a framework for CP implementation in a paper factory. The results show that process change gives higher priority between 5 criteria and that repair of all leaks in the paper-making process gives higher priority between 35 sub-criteria. Process change was further evaluated and discussed in which input material changes gained higher priority. The results of this research can be used to accelerate the implementation of CP in Iran's pulp and paper industry. [ABSTRACT FROM AUTHOR]

The 1987-88 strike at International Paper's Androscoggin Mill in Jay, Maine severed a longstanding 'social contract' where workers and community residents tolerated the mill's air and water pollution in return for good-paying jobs and a robust local economy. This article traces the development of environmental consciousness among union workers and community residents during the strike and their efforts to protect the environment from the pollution of the mill. The union publicized environmental problems at the mill and the state's failures to regulate pollution when the strike began. After a series of environmental accidents during the strike, including a massive chlorine dioxide gas leak that threatened the safety of the town, Jay residents formed a community environmental organization and pressured the company and the state to close the mill. The environment remained an important issue after the strike, as labor and environmental activists joined forces to uphold a municipal ordinance that allowed the town to enforce state and federal environmental laws. This article studies how labor and environmental politics converged on a local level and also explores the broader themes of the conflict between job prosperity and environmental protection in industrial communities, labor and environmental movement alliances, and the current issues surrounding the 'green economy'. [ABSTRACT FROM AUTHOR]

Stable isotope analysis of a novel combination of carbon and nitrogen pools traced inputs and processing of primary- treated (PE) and secondary-treated effluent (SE) from a paper and pulp mill (PPM) in a temperate Australian estuary. Distinct carbon stable isotope ratios of dissolved organic carbon (DOC) near the PPM outfall indicated large PE and reduced SE inputs of DOC. DOC was remineralized to dissolved inorganic carbon regardless of season, but rates were lower in winter. PE discharge in winter elevated DOC concentrations along much of the estuary. Distinct stable isotope ratios confirmed particulate organic matter (POM) input from PE and SE to the water column and into the sediment This was relatively localized, indicating rapid POM settlement regardless of season SE discharge increased nutrient inputs and enhanced algal productivity, particularly in summer when chlorophyll-a concentrations were elevated throughout the estuary. SE discharge reduced pCO2 from levels associated with PE discharge. However, the estuary remained heterotrophic as subsequent respiration or decomposition of algal material offset reductions in PPM organic matter input. The influence of the PPM was apparent throughout the estuary, demonstrating the ability of anthropogenic inputs, and changes to these, to affect ecosystem functioning. [ABSTRACT FROM AUTHOR]

This article conducts a field-level analysis of institutional change in the pulp and paper industry in the state of Maine over the past 30 years. Furthermore, it considers the natural environment as a field-level actor, which can focus and redirect attention and resources, serve as a constraint on previously acceptable behavior, and act as a catalyst for institutional change. [ABSTRACT FROM AUTHOR]

This paper presents the eco-efficiency assessment of the pulp and paper industry in Myanmar by using the key indicators such as raw material consumption, energy consumption, total waste output, water consumption, and CO emissions. The study was carried out by using quantitative methods for data analysis of the production, consumptions and emissions from fiscal year 2001–2005. The results revealed that the level of economic and environmental performance using the eco-efficiency ratio for each fiscal year has decreased since year 2002, and factory tried to increase the level of eco-efficiency again in year 2005. There was the positive aspect that factory could optimize the waste utilization by transferring lime mud to the cement factory in the last two fiscal years. This analysis showed the root causes that led to the losses of material, energy and water consumption and discussed how to conserve those utilities. [ABSTRACT FROM AUTHOR]

Positive Matrix Factorization (PMF) was used to identify and apportion candidate sources of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) in samples of offshore and coastal surface sediments from the Baltic Sea. Atmospheric deposition was the dominant source in offshore and pristine areas, in agreement with previous studies. Earlier chlorophenol use and a source suggested origins from pulp and paper production and related industries were identified as important coastal sources. A previously presumed major source, chlorine bleaching of pulp, was of only minor importance for modern Baltic surface sediments. The coastal source impacts were mostly local or regional, but pattern variations in offshore samples indicate that coastal sources may have some importance for offshore areas. Differences between sub-basins also indicated that local and regional air emissions from incineration or other high-temperature processes are more important in the southern Baltic Sea compared to those in northerly areas. These regional differences demonstrated the importance of including offshore sediments from the Bothnian Bay, Gulf of Finland, and other areas of the Baltic Sea in future studies to better identify the major PCDD/F sources to the Baltic Sea. [ABSTRACT FROM AUTHOR]

The lignin models anisole, 1,2-dimethoxybenzene, 1,4-dimethoxybenzene, and 1,3,5-trimethoxybenzene were reacted with ozone in aqueous solution, and major products were identified and quantified with respect to ozone consumption when reference material was available. Hydroxylation products in yields equivalent to those of singlet oxygen and muconic products (in analogy to the Criegee mechanism) dominate. The formation of quinones points to the release of methanol. Hydroxyl radicals (·OH, quantified, main precursor: O3-, singlet oxygen (quantified), O2- radicals (quantified), and as counterparts of the ·OH radicals radical cations of these methoxybenzenes must each play an important role as intermediates. In the case of 1,4-dimethoxybenzene, for example, the following products were identified (yields in parentheses when quantified): methyl)2Z,4E)-4-methoxy-6-oxo-hexa-2,4-dienoate 5(52%), hydroquinone 6 (2%), 1,4-benzoquinone 7 (8%), 2,5-dimethoxyhydroquinoné 8, 2,5-dimethoxy-1,4-benzoquinone 9, singlet oxygen (6%), hydrogen peroxide (56%), ·OH (∼17%), O2- (≤9%). Gibbs energies for the various potential reaction pathways were calculated with the help of the Jaguar 7.5 program. [ABSTRACT FROM AUTHOR]

The removal of AOX from bleach plant effluent of pulp and paper industry was studied using upflow anaerobic filter. In this paper biodegradation of AOX at different concentrations and effect of electron donors like acetate and glucose thereon in an upflow anaerobic filter at 20d HRT is described. Results showed significant improvement in AOX degradation when electron donors such as acetate and glucose were supplemented to the influent. AOX degradation was 88% at 28mgAOXL−1 and 28% at 42mgAOXL−1. The percent degradation efficiency was enhanced to 90.7, 90.2, and 93.0 at 28mgAOXL−1 when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. Similarly, the efficiency was 57, 56.6 and 79.6 at 42mgAOXL−1 when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. The GC–MS analysis data indicated that supplementation of the influent with electron donor increased the biodegradability of number of chlorinated organic compounds. [Copyright &y& Elsevier]

The procedure of electrocoagulation is an effective, fast and economic technique for treatment of black liquor resulting from paper industry. The effect of electrolysis time, current density, type of electrode material and initial pH were studied in an attempt to achieve a higher removal capacity. Under the optimal experimental conditions (initial pH 7, t =50min and J =14mAcm−2), the treatment of black liquor by electrocoagulation has led to a removal capacity of 98% of COD, 92% of polyphenols and 99% of color intensity with a good repeatability (R.S.D.<3%) making it possible to highlight the industrial interest of this electrochemical process. [Copyright &y& Elsevier]

The thyroid hormone (TH)-disrupting activity of effluents and environmental water samples in Thailand was surveyed by three in vitro bioassays with different endpoints. These assays test the potency of competitive binding with the active form of TH, 3,3',5-[125I]triiodo-l-thyronine (T3), to the plasma transport protein transthyretin (TTR) and TH receptor (TR; the TTR assay and TR assay, respectively) and the interference with the cellular T3-signaling pathway through TR-mediated luciferase gene activation (the luc assay). The TH-disrupting activity in water samples collected from paper manufacturing plants (PMPs), the canal Khlong U-Taphao, and a sewage-treatment plant (STP) was detected predominantly in the dichloromethane/methanol or methanol fractions of solid-phase extraction, suggesting a similar hydrophobic nature of the causative contaminants. The TR assay was relatively more sensitive than the TTR assay to the competitively potent contaminants. The luc assay indicated that the dichloromethane/ methanol fractions of most water samples contained anti-T3-like activity. Our assays demonstrated that wastewater treatment effectively removed the TH-disrupting contaminants from wastewater in the PMP and the STP. The potencies for TH disruption at the three sampling points of the STP exhibited positive correlations among the three bioassays, whereas those from the canal and PMP water were not correlated among the three bioassays. Furthermore, the influent contaminants that were competitively potent in the TTR assay partially affected the luc assay. These bioassays are useful monitoring tools that give results relevant for evaluating the health of amphibian populations. [ABSTRACT FROM AUTHOR]

Preventative innovation is central to ecological modernisation (EM). Evaluating the role of international actors in promoting EM in middle-income countries (MICs), the authors review existing studies of EM outside Western Europe, and distinguish 'internationally oriented' from 'domestically driven' EM. Policy agreements concerning battery and tyre waste, the Cleaner Production Programme, and technological changes in the pulp and paper industry show that foreign actors play a crucial role in promoting EM in Brazil, but they also indicate that international involvement carries risks, such as institutional dependence and introduction of inappropriate technologies. [ABSTRACT FROM AUTHOR]

Innovations may have positive societal effects such as improved environmental performance, and they are often portrayed as solutions to environmental problems. However, the mechanisms through which innovations develop and the ways in which public incentives support improved environmental performance of innovations are complex. This paper uses empirical cases to examine how environmental policies, market factors and technological push affect process and product innovations in the Nordic pulp, paper and packaging industries. The results show that environmental improvements in technologies and products are simultaneously driven by all three of these factors. Environmental innovations are often developed in anticipation of future policy or as side-effects of existing policies. However, while environmental policy directly influences process innovations, its connection to product innovations is less clear. The study points towards the importance of gradually tightening and predictable environmental policies that are flexible enough to allow the exploration of new technological developments. Copyright © 2007 John Wiley & Sons, Ltd and ERP Environment. [ABSTRACT FROM AUTHOR]

The article reports on the development of a photocatalytic packed-bed reactor for the oxidation of methanol, which is the key component of high volume volatile organic gases emitted from pulp and paper mills. Bench-scale studies were performed using an annular reactor packed with silica-titania composite pellets, to optimize methanol removal and reduce the formation of by-products such as formaldehyde.

Genetic engineering could result in a dramatic transformation of the forest products industry, increasing corporate economic power and concentrating timber production in those regions most suited to industrial-scale tree plantations. We briefly review arguments in favor of and in opposition to genetic engineering in forestry, and describe the constellation of forces promoting this technology. We then examine possible social consequences with specific reference to the pulp and paper industry in the southeastern United States. This study is exploratory in nature, forecasting possible consequences of a development that has not yet taken place. We suggest that the consequences are potentially far-reaching. [ABSTRACT FROM AUTHOR]

Upgradation of an effluent treatment plant (ETP) to meet capacity expansion of a large-scale paper industry for recycle of treated effluent is addressed. Performance evaluation of the plant under existing operating conditions and measures delineated for effective performance of the plant is also reported. A viable treatment alternative based on treatability studies is recommended for upgrading the existing facility for additional wastewater load from capacity expansion. The treatment alternative intends to provide effluent quality meeting the requirements for recycle in the paper machine section through modifications and proposed additional units. Implementation of the proposed scheme will result in conserving 28 500 m3 per day of fresh water demand. [Copyright &y& Elsevier]

This article investigates the reduction of water pollution at four Norwegian paper mills from the early 1970s until 1997. Especially during the 1990s water pollution from the mills has converged at a relatively low level. This is due to changes in the production processes, implementation of a common environmental strategy and investment in research and development. Over the years environmental improvements have become an integrated part of the technological trajectory in this industry. A common understanding of the problems and possible solutions between government and industry is one reason why we can talk about a greener technological trajectory. One reason for this common understanding is that the regulation of environmental problems in the paper industry has been based on the principles in Norwegian industrial policy. Integration of these principles into a site-specific environmental policy meant that questions concerning the regional economy were judged against local water pollution problems. This means that the regulation of the paper industry has to be seen in both a historical, geographical and institutional context. Copyright © 2000 John Wiley & Sons, Ltd. and ERP Environment. [ABSTRACT FROM AUTHOR]

Examines the resource use, emissions and environmental effects of paper production at eight paper mills in Norway. Goal hierarchy for environmental loads from paper mills; Benefits of locating paper mills at pristine environments; Importance of consistent and durable economic and political value judgments in the siting of paper mills.