Search

Successful integration of point-of-care testing (POCT) into clinical settings requires improved assay sensitivity and precision to match laboratory standards. Here, we show how innovations in amplified biosensing, imaging, and data processing, coupled with deep learning, can help improve POCT. To demonstrate the performance of our approach, we present a rapid and cost-effective paper-based high-sensitivity vertical flow assay (hs-VFA) for quantitative measurement of cardiac troponin I (cTnI), a biomarker widely used for measuring acute cardiac damage and assessing cardiovascular risk. The hs-VFA includes a colorimetric paper-based sensor, a portable reader with time-lapse imaging, and computational algorithms for digital assay validation and outlier detection. Operating at the level of a rapid at-home test, the hs-VFA enabled the accurate quantification of cTnI using 50 μL of serum within 15 min per test and achieved a detection limit of 0.2 pg/mL, enabled by gold ion amplification chemistry and time-lapse imaging. It also achieved high precision with a coefficient of variation of

The rapid spread of SARS-CoV-2 caused the COVID-19 pandemic and accelerated vaccine development to prevent the spread of the virus and control the disease. Given the sustained high infectivity and evolution of SARS-CoV-2, there is an ongoing interest in developing COVID-19 serology tests to monitor population-level immunity. To address this critical need, we designed a paper-based multiplexed vertical flow assay (xVFA) using five structural proteins of SARS-CoV-2, detecting IgG and IgM antibodies to monitor changes in COVID-19 immunity levels. Our platform not only tracked longitudinal immunity levels but also categorized COVID-19 immunity into three groups: protected, unprotected, and infected, based on the levels of IgG and IgM antibodies. We operated two xVFAs in parallel to detect IgG and IgM antibodies using a total of 40 μL of human serum sample in

The highly contagious nature and 100% fatality rate contribute to the ongoing and expanding impact of the African swine fever virus (ASFV), causing significant economic losses worldwide. Herein, we developed a cascaded colorimetric detection using the combination of a CRISPR/Cas14a system, G-quadruplex DNAzyme, and microfluidic paper-based analytical device. This CRISPR/Cas14a-G4 biosensor could detect ASFV as low as 5 copies/μL and differentiate the wild-type and mutated ASFV DNA with 2-nt difference. Moreover, this approach was employed to detect ASFV in porcine plasma. A broad linear detection range was observed, and the limit of detection in spiked porcine plasma was calculated to be as low as 42-85 copies/μL. Our results indicate that the developed paper platform exhibits the advantages of high sensitivity, excellent specificity, and low cost, making it promising for clinical applications in the field of DNA disease detection and suitable for popularization in low-resourced areas.

Packaging waste makes up more than 10% of the landfilled waste in the United States. While consumers often want to make environmentally friendly product choices, we find that their perceptions of the environmental friendliness of product packaging may systematically deviate from its objective environmental friendliness. Eight studies (N = 4,103) document the perceived environmental friendliness (PEF) bias whereby consumers judge plastic packaging with additional paper to be more environmentally friendly than identical plastic packaging without the paper. The PEF bias is driven by consumers' "paper = good, plastic = bad" beliefs and by proportional reasoning, wherein packaging with a greater paper-to-plastic proportion is judged as more environmentally friendly. We further show that the PEF bias impacts consumers' willingness to pay and product choice. Importantly, this bias can be mitigated by a "minimal packaging sticker" intervention, which increases the environmental friendliness perceptions of plastic-only packaging, rendering plastic-packaged products to be preferable to their plastic-plus-paper-packaged counterparts. This research contributes to the packaging literature in marketing and to research on sustainability while offering practical implications for managers and public policy officials. [ABSTRACT FROM AUTHOR]

This technical note describes in detail a method for associating individual sheets of blank A4 white paper from the same ream by the physical fit of machine‐cut edges. A large‐scale laboratory trial involving ~700 sheets of paper from 24 different reams (plus one spoiled sample), and more than 20,000 potential physical fits, correctly associated and sequenced 219 pairs of sheets together with a 100% empirical success rate and no false associations. The edge profile of each short machine‐cut end of a sheet of A4 paper allows us to physically fit sheets of paper from the same ream to each other and use this to predict the sequence of sheets in a set of documents. In a real‐life scenario, it may now be possible to detect the substitution or addition of a sheet in a multipage document, link documents from different sources to each other or to a common source of paper (e.g. to paper from a seized printer or from an accused's address) or to date documents. The study provides data for the application of this method in forensic casework and supports the practitioner when forming conclusions in this type of case. [ABSTRACT FROM AUTHOR]

Featured Application: A paper-based triboelectric nanogenerator using carbon nanotube composite papers, as developed in this study, has the potential to be used as an energy harvester in fields such as the Internet of Things (IoT). A unique triboelectric nanogenerator (TENG) using carbon nanotube (CNT) composite papers is proposed in this work. CNT composite papers can be fabricated easily using a method based on the production of Japanese washi paper. To obtain and evaluate the proposed TENGs, several types of CNT composite papers and aluminum plates were prepared. As the CNT composite paper contained many paper fibers, it was expected to be negatively charged, and the aluminum plate was expected to be positively charged across the triboelectric series. Through various experiments, it was confirmed that CNT composite papers could be used as TENGs. In addition, it was found that when a CNT composite paper was used, it contributed to triboelectricity generation, and the contained CNTs efficiently transferred the generated charge to the electrodes. Furthermore, output voltages approaching a maximum RMS value of 300 mV could be obtained. The results of this study will aid in the practical application of paper-based TENGs in the near future. [ABSTRACT FROM AUTHOR]

Copyright of International Journal of Professional Business Review (JPBReview) is the property of Open Access Publications LLC and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The years 1860 to 1960 witnessed the birth and rapid expansion of the modern pulp and paper industry. Its sine qua non was access to enormous volumes of conifer trees that grew in the northern hemisphere's temperate and boreal forests. Predictably, countries in northern Europe with large swaths of these woodlands became home to substantial pulp and paper industries. This article explains why Great Britain represented Europe's glaring exception to this rule. Unique circumstances allowed it to become Europe's largest newsprint producer even though it suffered from a dearth of conifers. Britain's newspaper publishers grew their circulations and created the largest newsprint market in Europe for most of the period under examination. To meet their exploding demand for paper, they gained control over their country's newsprint industry. Like producers in other western European countries, they looked to Scandinavia to address their lack of domestic wood supplies, but they also exploited their imperial connection to access a prodigious supply of fibre and pulps in Canada and Newfoundland. Britain's competitive advantage in this regard was political and not economic because tapping this distant source of raw materials was costly. Nevertheless, British producers were able to absorb the higher costs because their business was vertically integrated. However, British producers could not outrun their resource deficit forever. Changing global industry conditions after World War II caused them to lose their preponderant standing. [ABSTRACT FROM AUTHOR]

The cacao pod husk (shell), serves as the tough outer layer of the cacao pod, and this by-product of cacao processing is typically disposed of once the cacao beans have been removed. They contain a variety of compounds and can be repurposed to reduce waste and generate added value. This article offers an extensive and in-depth analysis of the possibility of utilizing cacao pod husk (CPH) as an environmentally friendly packaging material. It meticulously investigates the composition, properties, pre-treatment and extraction methods, and versatile uses of CPH. Particularly, this paper extensively examines the physical and barrier properties that are crucial for packaging, highlighting attributes like durability, pliability, and resistance to moisture, and focuses on how these properties can effectively maintain product freshness and enhance the suitability of CPH for different food items. In addition, the article provides a thorough examination of the various ways in which CPH can be utilized, such as in the creation of antimicrobial coatings, the production of paper that can naturally decompose, and its contribution to the advancement of composite materials, delving into the assessment of its environmental impact and presents optimistic prospects for the future of this eco-friendly packaging alternative. This comprehensive and enlightening review is poised to be an invaluable resource for researchers, professionals in the industry, and policymakers who are interested in harnessing the potential of CPH for sustainable packaging, which proposes a wealth of knowledge and practical insights for those seeking environmentally friendly packaging solutions. [ABSTRACT FROM AUTHOR]

Water-repellent coatings are essential for enhancing the durability and sustainability of textiles, paper, and bioplastic polymers. Despite the growing use of sustainable materials, their inherent hydrophilicity presents significant challenges. This review explores advanced coating technologies to address these issues, focusing on their mechanisms, properties, and applications. By imparting water resistance and repellency, these coatings improve material performance and longevity. The environmental impact and limitations of current coatings are critically assessed, highlighting the need for sustainable solutions. This review identifies key trends and challenges, offering insights into developing water-resistant materials that align with environmental goals while meeting industry demands. Key focus areas include coating mechanisms, techniques, performance evaluation, applications, environmental impact assessment, and the development of sustainable coating solutions. This research contributes to the development of water-resistant materials that meet the demands of modern industries while minimizing environmental impact. [ABSTRACT FROM AUTHOR]

The worldwide recycling rate for paper is about 60% and there are ongoing efforts to enhance the recycling rates to 80%. The low strength of recycled paper primarily due to the contaminants in it fetches lower value to the recycled paper in the market and also limits its recyclability. The ways to circumvent the problem of contamination of paper have been addressed by adding additives. However, the use of additives increases the cost of the final recycled paper. Oxidation has been explored as an alternative to enhance the tensile strength of paper in this work as it can be used in existing paper recycling facilities without any modifications. Pulp fibres were collected from an active paper recycling mill and subjected to oxidation at various oxidation levels from 0.25 up to 1.5 mmol/g. It was found that the tensile strength of the paper increased by up to 89% with an increase in oxidation level up to 1 mmol/g and later decreased with a further increase in the oxidation level up to 1.5 mmol/g. The brightness of the paper increased by up to 3% with an increase in oxidation level up to 0.85 mmol/g and then a decrease with further enhancement in the oxidation level. The oxidized samples were also studied with infrared spectroscopy, x‐ray diffraction, electron microscopy, and optical properties to study the behaviour of the resulting material. A ring crush test and corrugating medium test were also performed on the oxidized pulp samples to establish the feasibility of the material for packaging applications. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Turkish Journal of Geographical Sciences / Coğrafi Bilimler Dergisi is the property of Cografi Bilimler Dergisi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

We propose a new type of soft actuator based on carbon nanotube (CNT) composite paper (CNTCP), i.e., a paper actuator. In our previous study, we demonstrated that actuator operation was possible when using CNTCPs as electrodes with ordinary paper containing ionic liquid between the electrodes; however, their bending motion was not sufficient. Therefore, we here attempt to modify the paper actuator. For this, we tried to soften CNTCPs by first reducing the ratio of contained CNTs. In addition, as a new strategy, we took advantage of the fact that the proposed actuator was made of paper and introduced the Kirigami (introducing periodical slits to papers) technique into the structure of our paper actuator. As a result, the performance of the actuator was improved, and its bending motion became visibly larger. The response of the improved actuator to the input voltage was investigated in detail, and the detailed operating conditions could be clarified. Moreover, it was found that not only a bending motion but also a twisting motion could be realized in specific slit patterns. It is thought that the fact that the variation in movement can be increased simply by adding incisions is unique to the proposed paper actuator. [ABSTRACT FROM AUTHOR]

The Bodleian Library hosts one of the most important collections of Arabic manuscripts in Europe but most of them are unpublished or remain widely understudied. This article discusses the Arabic illuminated manuscripts produced in 14th- and 15th-century Egypt and Bilād al-Shām identified in this institution and aims to highlight their production context and material characteristics. The study of these manuscripts also gives an insight into the main phases and codicological features of the arts of the book during the Mamluk period. [ABSTRACT FROM AUTHOR]

Paper is the largest renewable industrial substrate produced for various applications and can be recycled by disintegrating the fibers and reforming the paper. Paper and its fiber constituents lack functions such as electrical conductivity and papermaking itself has not been used for producing electronic devices. In this work, we show a potential industrially viable route for introducing cationic charges on the cellulose fibers and subsequently show how the adsorption of negatively charged ionically and electrically conductive materials onto these fibers from aqueous media can be applied at time scales relevant to industrial papermaking. This results in electroactive fibers, that can subsequently be used to prepare electroactive papers using standard papermaking procedures. Since fibers in the paper can selectively be coated with different active materials, various functions can be added into the paper. To demonstrate applications, we prepared electroactive papers using fibers with adsorbed carbon nanotubes (CNTs) and conducting polymers. We achieved conductivity of 21 S/m with only 1wt% CNT. We also prepared papers with CNTs and black phosphorus, used as paper-based lithium, and sodium ion battery (free-standing) anodes. They delivered a specific capacity of 642 mA h g−1 at 100 mA g−1 after 3500 cycles with 99.5% columbic efficiency. Furthermore, we recycled the papers, and as the disintegration of the fibers did not lead to removal of the ionic or electroactive materials from the fiber surface, the recycled papers showed similar electrical and mechanical properties to the original papers. This opens the path for recyclable paper-based electronics. [ABSTRACT FROM AUTHOR]

The International Paper Conservation Seminar has now been held as four face-to-face events and four online events. It is a three-day international event delivered in Spanish and Portugese with keynote talks from national and international conservation professionals from Mexico to Chile presenting projects covering works on paper in diverse formats including documents, photographs historic books, and artworks. Countries such as Argentina, Chile, Bolivia, Peru, Ecuador, Mexico, Paraguay, Uruguay, Colombia, Brazil, Spain and Costa Rica have sent delegates to discuss both the social and cultural aspects of conservation work. The seminar is a completely free event for its attendees. It is intended to be suitable for all, with high-level talks addressing issues of management, preservation, conservation, restoration and disaster recovery among many others. From the third event onwards, training workshops for basic treatments have been developed, with the participation of recognized conservation professionals from universities and international institutes, allowing the number of attendees to remain constant since the Covid-19 pandemic. It creates networks and fosters collaboration for professional and institutional projects. The seminars have generated a connected and active community of paper conservators in the region, aware of our limitations, and capable of solving problems collaboratively and according to local resources. [ABSTRACT FROM AUTHOR]

This essay charts the way that ideas of nature, life and disease generated new approaches to Europe's documentary culture between roughly 1650 and 1950. Training its focus on the medium of paper, specifically the essay, reveals conceptual intersections between caretakers of libraries and archives and naturalists or physicians whose focus was the entomology or bacteriology. The recognition of the fundamentally organic nature of books (animal, vegetable, mineral, in a Linnaean sense) invited fresh vocabularies and practices of care and preservation. The essay first explores how book lovers—often encouraged by learned societies or state agencies in the eighteenth century—campaigned against insects whose habitat lay between the covers of precious tomes. It then traces how nineteenth-century microscopy and bacteriology informed notions of sickness or 'pathology' in books. It ends by describing the efforts to remediate these impairments in the twentieth century: to deploy chemistry and medicine as therapies for bringing imperilled papers back to health. [ABSTRACT FROM AUTHOR]

In France, the last decade of the eighteenth century saw an explosion in papers of diverse kinds, put to new political uses. However, in the aftermath of the French Revolution, paper was also instrumentalised to articulate histories of revolutionary participation, as well as changing ideas about revolutionary identification. Some of these were coded as virtuous: paper objects found a place at the heart of sentimental accounts of personal sacrifice, such as that of prison warder Joseph Cange. Conversely, paper was central to claims for culpability or reparation—most strikingly, assorted papers were mobilised as defence against recrimination for involvement in regicide, as discussed here in relation to printmaker and politician Antoine-Louis-François Sergent-Marceau. This essay considers how the apparent abundance that characterised the period's paper ecology, along with new attitudes toward paper's proliferation, preservation and disposal, bore the imprint of political justification, evasion and historical revisionism—all framed by the need to 'pass' as post-revolutionary. [ABSTRACT FROM AUTHOR]

This essay focuses on an eighteenth-century book, A Catalogue of the Different Specimens of Cloth Collected in the Three Voyages of Captain Cook to the Southern Hemisphere , which opens up alternative histories of paper in the early modern world. The work consists of a letterpress pamphlet describing the production of bark cloth (tapa), bound with samples of tapa, which were acquired from one of Captain Cook's naval officers. In placing paper and bark cloth into relationship with one another, the work offers another vantage point from which to theorise not only the material history of paper but also the ways in which paper was dependent on an ability to 'invisibly occupy'. Paper's material invisibility is both part of its strength while also demonstrating the intellectual blind spots that can occur in attending solely to material histories of paper worlds. [ABSTRACT FROM AUTHOR]

The arts of cutting and joining paper (katʿı and vas·s·¯ale) were much prized at the early-modern Ottoman court in Istanbul. This essay takes a single folio of katʿı prepared by the Ottoman paper joinery master (vas·s·¯al) Kalender Efendi (d. 1616) as a starting point from which to explore the essential role of paper in the administration and unification of the Ottoman Empire, shaping the state's relationships with its subjects, and making possible the environment in which Kalender was educated and rose to prominence. Through his skillful manipulation of paper, Kalender created intricate artworks that served as resting place for the eye and mind, astonishing viewers with his skills, and encouraging them to engage in insightful looking. Paper thus served as the locus of intellectual, artistic, and economic encounters, and gave shape to relationships both in the moment and over time [ABSTRACT FROM AUTHOR]

This essay considers the material and visual cultural dynamics through which the modern state emerged during the Age of Revolutions in the Atlantic world. It centres upon the emergent rhetoric of the 'written constitution' in Revolutionary North America and the new United States, arguing that this mode of constitution-making represented not the invention that many claimed it to be, but instead a revision of the relationship between document, statecraft and the body in early modern British empire that built upon seventeenth-century English critics of monarchical power. The continuities between the material substrates of empire and nation came to be masked by a rhetoric of disavowal that posited the US constitutional form as both an innovation and a template for the material entanglements of the modern state. [ABSTRACT FROM AUTHOR]

When turning to the techniques of etching on metal to make intaglio prints on paper, goldsmiths addressed potential clients and other fellows in their trade. In doing so, they put forth statements about what constituted property for members of each of these social stations. Multiple claims competed to classify to whom the raw materials belonged, the skills to transmute them or the forms that such handiwork took and whether the ownership of such entities could be transferred, redirected or even undone. The Nuremberg goldsmith Christoph Jamnitzer stages these questions in an etching that shows a tailor who is holding a flag stitched together from remaindered pieces of cloth. Connecting for the first time this image to its literary source, Hans Sachs's 'The Tailor and the Flag', published in 1563, this essay demonstrates how the episode attests against the hoarding of materials, and for the ethos of giving clients and apprentices their due. [ABSTRACT FROM AUTHOR]

This special issue examines paper as it became the definitive material for both artistic practice and jurisprudence. European paper made from pulped rags and linens to create the mythic white empty grounds for design was foundational to early modern European ideas about both sovereignty and the creative act. The materiality of paper—as a surface created from refuse—also introduced a form of ecological thinking into both artistic practice and political theory that recognised the value and revolutionary potential of the material world to create from the detritus of failed projects and revolutions. Surveying artistic production across the European continent and into the Ottoman empire, this series of essays examines paper as both a material force that redefined the limits of the creative act while also being inseparable from the consolidation of new political regimes emerging from the rise of early modern colonialism. Paper was both the tool of dispossession and also the grounds on which the potential of artistic practice was reimagined. [ABSTRACT FROM AUTHOR]

Cellulosic material is considered to be excellent for food packaging due to its low cost, easy degradability, and high recyclability rates. However, its application is still limited due to its porous structure and high hydrophilicity, which provide high permeabilities to grease, gas and water vapor. One solution to fix these issues and to bring new functionalities that can also extend food shelf life is to coat the paper substrate with biopolymers containing nanoparticles and/or components with antioxidant and/or antimicrobial activities. In this regard, the aim of this study was to review some aspects of the current knowledge critically and didactically on applications of biopolymer-based coatings incorporated with active components and/or nanoparticles on paper/paperboard materials usually applied as primary cellulosic active packaging. Studies have shown that this combination can positively improve the physical, mechanical, and barrier properties of cellulosic packaging, along with the enhancement of antioxidant and antimicrobial activities. A better understanding of these aspects enables the use of other active compounds to develop more functionality to the packaging itself as well as to apply it to food packaging in general. [ABSTRACT FROM AUTHOR]

The article provides a history of Renaissance cartapesta or papier mâaché and explores its use in 15th- and 16th-century Italy and Germany. Topics discussed include earlier Italian recipe for cartapesta, Don Alessio Piemontese's cartapesta recipe collection, papier mâaché recipe in a female convent in Nuremberg, Germany, papier mâaché reliefs at the Cistercian monastery of Wienhausen and papier mâaché production in the context of the Lutheran Reformation.

Through this article, we aim to draw attention to the implications that light has on the writing support (paper) and substance used to write (ball point pen ink) and, implicitly, on the conclusions that result from their forensic examinations. It is known that, over time, due to different ways of preserving documents, both paper and ball point pen ink undergo (more or less) transformations of their physical and chemical properties that influence the results of certain examinations, carried out at different time periods (both regarding the period elapsed from the preparation of the document to its forensic examination, as well as that between successive forensic examinations of the same document). These factors must be taken into account by the forensic expert in formulating the working hypotheses that will form the basis of the forensic conclusions. We mention that we will only refer to a non-invasive, non-destructive analysis of these materials used in the preparation of documents (without chemical analyses). In order to carry out this study, we resorted to an experiment, by making samples and observing them through visual and comparative analysis, making deductive and inductive reasoning. Also, the study of the relevant specialized materials constituted an important pillar of this study. Thus, it is necessary for the examiner in the field not to prejudge the case, but to carry out in-depth examinations trying to overcome the known barriers. [ABSTRACT FROM AUTHOR]

The production of paper–polymer composite materials based on polystyrene and plant extracts of coniferous trees is described. The resulting bioplastics have increased resistance to biodegradation and are a promising basis for use as reinforcing polymer systems of cellulose-containing materials used for the production of packaging materials and special-purpose papers as part of electrical devices for various purposes. It has been shown that the inclusion of plant extracts makes it possible to improve the physical and mechanical properties of paper composites and ensure their resistance to biocorrosion. The conducted research makes it possible to expand the areas of application of paper materials and products based on them. [ABSTRACT FROM AUTHOR]

In the late 18th and first half of the 19th century, print gained a permanent foothold in the Middle East and enabled the mass production of books in Arabic, Turkish, and Persian. As a consequence, handwriting gradually ceased to be the primary technology for making books. This article, the second of two, examines the materiality of a selection of Arabic manuscripts mostly made between 1870 and 1930 CE. It shows how scribes not only adapted to the availability of new types of pens or stationery when making their manuscripts, but also that some of them adopted layout choices and paracontent typical of printed books. Tradition and change are both visible in the objects that were analysed, and it is especially against the backdrop of a growing print industry in the Middle East that Arabic manuscript culture's strengths and its ability to adapt emerge. [ABSTRACT FROM AUTHOR]

The development of pesticides has significantly advanced global agricultural production, but the ensuing problem of pesticide residues poses a severe threat to human health. So, there is an urgent need to establish a rapid, accurate, sensitive, cost-effective and on-site method for large-scale detection of pesticide residues. Electrochemical paper-based analytical devices (ePADs) represents a highly sensitive and portable microanalysis system, which uses paper as a substrate and relies on a capillary force to drive the fluid for the separation and detection of samples. The diversity of pesticides and agricultural products and the complexity of matrices impose high requirements on the sample preparation procedure. This article summarizes the preparation process of ePADs from the aspects of paper selection, the establishment of hydrophilic and hydrophobic channels, the integration of separation zones, and electrode printing. Subsequently, this paper establishes the relationship between pesticide detection and chip preparation based on the mechanism of electrochemical detection of pesticides. Finally, it discusses the advantages, challenges and future prospects of ePADs with a view to providing theoretical reference for enhanced application of ePADs in the field of pesticide residue detection.

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (three-ply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability.

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper’s limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard.

The use of mineral-based fillers tends to reduce the mechanical properties of paper, which can limit their application. The filler surface modification is a significant treatment to overcome this limitation. This research aims to offer a novel modified mineral-based filler to provide its industrial application. The surface of precipitated calcium carbonate (PCC) was modified with xylan (XS), which is a type of hemicellulose, a polysaccharide consisting mainly of xylose residues. It is used as a filler at different filler dosage levels in paper pulp. Modified PCC(MPCC) was characterized with Fourier transform infrared spectroscopy, Thermogravimetric analysis, X-ray photoelectron spectroscopy, X-ray diffraction and Field-emission scanning electron microscopy analyses. The analysis demonstrated that the MPCC filler surface was coated with XS successfully. The effect of PCC and MPCC-filled hand-sheet paper physical, chemical and optical properties were studied. The experimental results showed that the mechanical (tensile, burst, tear strength) and optical (brightness, opacity) of hand-sheet paper filled with MPCC were significantly improved compared with unmodified PCC-filled paper at the same ash content. The filler retention of PCC and MPCC fillers in paper was investigated, and the MPCC filler showed better filler retention properties in paper stock than the PCC filler. [ABSTRACT FROM AUTHOR]

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

In the realm of food waste recycling, industrial suberoligneous by‐products like cork and peels, pose a challenge for value‐added conversion, primarily due to their intricate structures. This study introduces an innovative approach by utilizing recycled cork as a prime example of repurposing food waste to create a reusable and durable packaging paper. Notably, the manufacturing process of this cork‐based paper avoids the generation of waste liquids from lignin removal, effectively alleviating concerns related to liquid waste pollution. The resulting packaging paper demonstrates remarkable printability, readability, and erasability while offering reusability. Its performance can be fine‐tuned through pH value adjustments. Moreover, this packaging paper exhibits outstanding antioxidative properties and barrier properties, seamlessly integrating superb UV‐blocking proficiency and heightened visible transparency, rendering it highly appealing for sustainable food packaging applications. [ABSTRACT FROM AUTHOR]

The primary heat transfer source in the conventional multi-cylinder drying of paper and board is conduction. Conduction is facilitated by high-tension contact with steam-heated cylinders, while convective drying, the main mass transfer source, operates as heated air flows over the article web in the pockets. This conduction process occurs at elevated temperatures and contact pressures to ensure effective contact between the wet paper web and the heated cylinders. The contact pressures and temperatures of the hot surface significantly influence the conductive drying characteristics. This research paper presents an experimental study that involves designing a simple lab-scale setup with in-situ and continuous sensing capabilities for various commercially available grades of paper and board. Embedded thermocouples measure the temperatures of the heated platen and the sheet, allowing the collection of flux data to determine heat transfer characteristics. The goal of this study is to ascertain the instantaneous contact coefficients for different basis weights as a function of moisture content. The acquired data will provide valuable insights and information toward process development, design, and simulation of the article drying process. [ABSTRACT FROM AUTHOR]

The fines fraction in mechanical pulp, produced during wood processing can impact the mechanical properties of the resulting paper positively or negatively, making them potential additives for paper strength improvement at the right loading level. To enhance fines' effectiveness as paper strength additives that have heterogeneous surface chemistries, this work employed a regioselective surface esterification method conducted under mild conditions in acetone, with the addition of succinic anhydride and imidazole. This approach converted surface hydroxyl groups of fines into carboxylic acid groups, resulting in a final content of near 0.5 mmol g−1. This modification increased fines' hydrophilicity, as evidenced by enhanced moisture absorption capacity in dynamic vapor sorption analysis. These fines with additional functionality strengthened intermolecular bonding, leading to over 150% enhancement in tensile strength and Young's modulus when cast into thin films. Fines were substituted at 10–20 wt.% concentration to the fiber fraction of softwood thermomechanical pulp (TMP) and bleached chemi-thermomechanical pulp (BCTMP) forming handsheets. It was observed that fines modified with succinic anhydride and imidazole were more effective in enhancing paper strength, including tensile (up to 30%), burst (up to 39%) and tear (up to 4%) indices. This improvement was likely due to enhanced intermolecular bonding between modified fines and the fiber surfaces. By modifying mechanical pulp fines with succinic anhydride and imidazole, we have converted a potential heterogeneous waste product from the industry into a valuable by-product to enhance paper performance. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper's limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard. [ABSTRACT FROM AUTHOR]

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (threeply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability. [ABSTRACT FROM AUTHOR]

The primary aim of this research was to explore the feasibility of producing environmentally friendly composite materials by employing diverse hybrid matrices consisting of dammar natural resin, supplemented with small proportions of two synthetic resins: one epoxy and the other acrylic. A blend of paper and chicken feathers served as the reinforcing elements. The fabrication of these composite materials utilized a hand layup technique. Targeted for applications in the furniture industry or interior design, their mechanical properties were assessed through various tests. Specimens were obtained from the manufactured samples and subjected to evaluations for tensile strength, compression, flexure, vibrations, Shore hardness, and water absorption. Results indicated that irrespective of the testing method employed, the mechanical strength properties exhibited a decline with an increase in the percentage of dammar in the hybrid resins, whereas the elasticity properties demonstrated an increase with this percentage. [ABSTRACT FROM AUTHOR]

Through the dual keywords--wenfang 文房 and "four friends" (siyou 四友)--this essay examines the inextricable interrelationship among material things, a place, and the self that was initiated during the Song dynasty (960-1279). Song literati displayed unprecedented interest in scholarly things, particularly four specific things in the studio--the writing brush, inkstone, paper, and ink. Through literary representations, this article investigates the changing nature of the literati's relation to these "four things" in the studio. Rather than framing their bond as the ruler and ministers or the owner and his possessions, from the early Northern Song to the Southern Song, writers transformed their relationship to these four things gradually to that between friends and peers, or from pure ownership to an imaginary friendship, and in turn, these four things supported the construction of both the personal studio and the collective identity of the new elites in the Song. This transformation from "four things" or "four treasures" to "four friends" represented a distinctive model of the observation and conception of material things that Song scholars developed, which provided intriguing insights into the relationship between humans and things in premodern China. [ABSTRACT FROM AUTHOR]

• White acrylic paint pigment is slightly alkaline and foxing-resistant. • Acrylic-gesso-coated watercolor paper can be used as an anti-foxing backing. • Acrylic gesso coating is simple & cost-effective against foxing. One of the concerns of watercolor artworks on paper is the natural oxidation process of the paper, leading to the development of unsightly yellow-brown spots referred to as foxing. Historically, efforts to preserve watercolor pieces in museums, institutions, and private collections have relied on intricate and expensive techniques. Unfortunately, these methods are not practical for the broader community of artists and less affluent collectors. Furthermore, the introduction of foreign preservation materials, which can interact with the artwork's components, poses a risk to the original visual appeal. Consequently, watercolor art collections have lost some of their appeal compared to oil paintings on canvases. This study endeavors to offer an alternative, straightforward, and cost-efficient approach to safeguarding watercolor artworks created on high-quality watercolor paper, a type commonly used by typical watercolorists, making it a suitable candidate for this investigation. This approach also avoids introducing additional substances to the artwork. The protective technique involves the application of commercially available acrylic gesso to a fresh sheet of watercolor paper. This gesso-coated paper serves as a backing for framing and displaying the original watercolor artwork, without the need for any foreign preservation materials to be added to the artwork itself. To assess the effectiveness of this protection method, a comparison was made between the foxing tendencies of protected and unprotected paper artworks stored for a decade. These samples were subjected to various analytical techniques, including optical microscopy (OM), confocal laser scanning microscopy (CLSM), field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX), X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and thermogravimetric analysis (TGA). The results revealed that, when compared to untreated samples, rarely any foxing spots were observed on any of the treated samples, and both the oxidation and degradation of cellulose fibers were diminished. Additionally, the analysis showed that the acrylic gesso comprised inorganic components such as calcium carbonate (CaCO 3), dolomite (CaMg(CO 3) 2), rutile (TiO 2), and organic acrylics. The carbonates created a mildly alkaline environment, neutralizing the acidity in the paper. The titanium dioxides exhibited biocidal and fungicidal properties due to their photocatalytic characteristics. The acrylic component bound and dispersed the inorganic constituents, and the coating formed a less impenetrable barrier layer as indicated by the scanning electron microscopy (SEM) results. In addition to significantly improving the resistance of the paper to foxing, the methods outlined in this study are highly cost-effective and readily accessible to artists and collectors. Importantly, they do not involve the addition of any restoration materials to the original artworks. [ABSTRACT FROM AUTHOR]

The lithography books of Iran, despite their historical importance, have received relatively little attention. This study aims to comprehensively examine an Iranian lithography book from the Qajar period titled Hayat al-Qolub, to identify its materials. The paper pulp, sizing, inks and leather of the bookbinding were analyzed through various methods, including staining tests for identifying paper pulp, light microscopy, FTIR, Raman spectroscopy, Micro-spectrophotometry, multi-band imaging, SEM-EDS and LC-MS. The findings suggest that the book was made of rag paper composed of linen and cotton fibers, while animal glue and gypsum were used for paper sizing and filling, respectively. Carbon black was used as black printing ink and cochineal was used for red ink. The leather cover of the book was made of goat skin that was tanned with gallotannins and unhaired with lime. Evidence of the use of liming in the unhairing process was also observed in this leather. This research enhances our understanding of paper and bookmaking techniques of the Qajar period in Iran. [ABSTRACT FROM AUTHOR]

School maps emerged as new type of document as a result of a series of technological and educational advances spanning the 18th to the 20th century. These maps originally played strictly functional and didactic roles. The passage of time has endowed them with an indisputable historical, documentary, scientific and even artistic character. Those currently housed in archives are generally poorly preserved due to issues related to their manufacture and general lack of concern for their safeguard after losing their original function. This study aims to characterise the materials serving to manufacture them by sampling a series housed in the Archives of the University of Granada, a task that is complicated by their multilayered nature (cloth, paper, printing inks and protective varnish). Preliminary identification of the fibrous elements reinforcing the papers and textiles by means of micro-invasive analytical techniques enables to subsequently define appropriate conservation and restoration protocols. [ABSTRACT FROM AUTHOR]

Thin coating layers of cross-linked polydimethylsiloxane (PDMS) and inorganic particles including glass spheres (GS), colloidal and fumed silica (aero and N20), montmorillonite (MMT), and kaolin (K) were attached onto Grade 1 Whatman filter paper (WFP) substrates using the spraycoating procedure to achieve superhydrophobic hybrid paper sheets. Coating formulations were varied in terms of their PDMS molecular masses and inorganic particles to prepare different samples. The effect of PDMS molecular weight and change in inorganic particle composition on the optical properties, surface roughness, barrier properties, surface chemistry, and topography was investigated. Hybrid paper sheets with ΔE00 values lower than 1 could be achieved, the surface roughness of which could be decreased by increasing the PDMS molecular weight in the coating formulation. Scanning electron microscopy studies revealed a homogeneous coating distribution, resulting in significant improvements in both the air and water barrier properties of the hybrid paper sheets. Spectroscopic investigations revealed the presence of interactions between the coating layer and the underlying paper substrate. Moreover, the distribution behavior of the inorganic particles on the spraycoated surfaces using the proposed method was also investigated using model compounds. [ABSTRACT FROM AUTHOR]

This paper discusses three large, almost identical oval breverls from the eighteenth century burial contexts in present-day Republic of Croatia. Two of them were discovered during archaeological excavations in Žuberak and Prozorje, while the third one from Ližnjan had not been defined as breverl until now. Breverls are the rarest and most enigmatic devotional objects but the three analysed in this paper have a common link other than their appearance. They all contained religious medals from pilgrim sites and papers with the prayer against all evils and demonic attacks on one side and the blessings of saints, the prayer for the identification of those tortured by evil spirits, and the Prologue to John's Gospel on the other. This article compares the papers discovered in them, studies the motifs from the mentioned breverls and analyses other finds from them to provide answers to the questions of their place of production, the identity of the people who wore them and why. Tentative correlation of different bioarchaeological factors, such as age, sex, and health condition of the deceased can give us much information on who breverl bearers were. Apparently, they were the vulnerable members of society, such as pregnant women, people suffering from poor health, or, as prayers from the breverls suggest, individuals believed to be tortured by demons or evil spirits. Taking that into account, breverls were devotional objects believed to provide universal protection, a sort of medicine case for both physical and spiritual problems. [ABSTRACT FROM AUTHOR]