Search

The identification of large numbers of localised transient EUV brightenings, with small spatial scales, in the quiet-Sun corona has been one of the key early results from Solar Orbiter. However, much is still unknown about these events. Here, we aim to better understand EUV brightenings by investigating their spatial distributions, specifically whether they occur co-spatial with specific line-of-sight magnetic field topologies in the photospheric network. EUV brightenings are detected using an automated algorithm applied to a high-cadence (3 s) dataset sampled over ~30 min on 8 March 2022 by the Extreme Ultraviolet Imager's 17.4 nm EUV High Resolution Imager. Data from the Solar Dynamics Observatory's Helioseismic and Magnetic Imager and Atmospheric Imaging Assembly are used to provide context about the line-of-sight magnetic field and for alignment purposes. We found a total of 5064 EUV brightenings within this dataset that are directly comparable to events reported previously in the literature. These events occurred within around 0.015-0.020 % of pixels for any given frame. We compared eight different thresholds to split the EUV brightenings into four different categories related to the line-of-sight magnetic field. Using our preferred threshold, we found that 627 EUV brightenings (12.4 %) occurred co-spatial with Strong Bipolar configurations and 967 EUV brightenings (19.1 %) occurred in Weak Field regions. Fewer than 10 % of EUV brightenings occurred co-spatial with Unipolar line-of-sight magnetic field no matter what threshold was used. Of the 627 Strong Bipolar EUV Brightenings, 54 were found to occur co-spatial with cancellation whilst 57 occurred co-spatial with emergence. EUV brightenings preferentially occur co-spatial with the strong line-of-sight magnetic field in the photospheric network. They do not, though, predominantly occur co-spatial with (cancelling) bi-poles., Comment: 14 pages, 8 figures, accepted in A&A

Context. Solar coronal jets seen in EUV are ubiquitous on the Sun, have been found in and at the edges of active regions, at the boundaries of coronal holes, and in the quiet Sun. Jets have various shapes, sizes, brightness, velocities and duration in time, which complicates their detection by automated algorithms. So far, solar jets reported in the Heliophysics Event Knowledgebase (HEK) have been mostly reported by humans looking for them in the data, with different levels of precision regarding their timing and positions. Aims. We create a catalogue of solar jets observed in EUV at 304 {\AA} containing precise and consistent information on the jet timing, position and extent. Methods. We designed a citizen science project, "Solar Jet Hunter", on the Zooniverse platform, to analyze EUV observations at 304 {\AA} from the Solar Dynamic Observatory/Atmospheric Imaging Assembly (SDO/AIA). We created movie strips for regions of the Sun in which jets have been reported in HEK and ask the volunteers to 1) confirm the presence of at least one jet in the data and 2) report the timing, position and extent of the jet. Results. We report here the design of the project and the results obtained after the analysis of data from 2011 to 2016. 365 "coronal jet" events from HEK served as input for the citizen science project, equivalent to more than 120,000 images distributed into 9,689 "movie strips". Classification by the citizen scientists resulted with only 21% of the data containing a jet, and 883 individual jets being identified. Conclusions. We demonstrate how citizen science can enhance the analysis of solar data with the example of Solar Jet Hunter. The catalogue of jets thus created is publicly available and will enable statistical studies of jets and related phenomena. This catalogue will also be used as a training set for machines to learn to recognize jets in further data sets.

Solar flares and coronal mass ejections are interrelated phenomena that together are known as solar eruptive events. These are the main drivers of space weather and understanding their origins is a primary goal of Heliophysics. In this white paper, we advocate for the allocation of sufficient resources to bring together experts in observations and modeling to construct and test next generation data-driven models of solar eruptive events. We identify the key components necessary for constructing comprehensive end-to-end models including global scale 3D MHD resolving magnetic field evolution and reconnection, small scale simulations of particle acceleration in reconnection exhausts, kinetic scale transport of flare-accelerated particles into the lower solar atmosphere, and the radiative and hydrodynamics responses of the solar atmosphere to flare heating. Using this modeling framework, long-standing questions regarding how solar eruptive events release energy, accelerate particles, and heat plasma can be explored. To address open questions in solar flare physics, we recommend that NASA and NSF provide sufficient research and analysis funds to bring together a large body of researchers and numerical tools to tackle the end-to-end modeling framework that we outline. Current dedicated theory and modeling funding programs are relatively small scale and infrequent; funding agencies must recognize that modern space physics demands the use of both observations and modeling to make rapid progress., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 9 pages, 4 figures

The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observations from a multi-view dataset, which includes EUV imaging to spectroscopy and magnetic field measurements. These data come from IRIS, SDO, Hinode, as well as several instruments on Solar Orbiter. Information given by SDO/HMI and Solar Orbiter PHI/HRT shows that a parasitic polarity emerging underneath the filament is responsible for bringing the flux rope to an unstable state. As the flux rope erupts, Hinode/EIS captures blue-shifted emission in the transition region and coronal lines in the northern leg of the flux rope prior to the flare peak. Solar Orbiter SPICE captures the whole region, complementing the Doppler diagnostics of the filament eruption. Analyses of the formation and evolution of a complex set of flare ribbons and loops show that the parasitic emerging bipole plays an important role in the evolution of the flaring region. While the analysed data are overall consistent with the standard flare model, the present particular magnetic configuration shows that surrounding magnetic activity such as nearby emergence needs to be taken into account to fully understand the processes at work. This filament eruption is the first to be covered from different angles by spectroscopic instruments, and provides an unprecedented diagnostic of the multi-thermal structures present before and during the flare. This dataset of an eruptive event showcases the capabilities of coordinated observations with the Solar Orbiter mission., Comment: Accepted for publication in the Astronomy & Astrophysics special edition "Solar Orbiter First Results (Nominal Mission Phase)" (23/05/2023)

FOXSI is a direct-imaging, hard X-ray (HXR) telescope optimized for solar flare observations. It detects hot plasma and energetic electrons in and near energy release sites in the solar corona via bremsstrahlung emission, measuring both spatial structure and particle energy distributions. It provides two orders of magnitude faster imaging spectroscopy than previously available, probing physically relevant timescales (<1s) never before accessible to address fundamental questions of energy release and efficient particle acceleration that have importance far beyond their solar application (e.g., planetary magnetospheres, flaring stars, accretion disks). FOXSI measures not only the bright chromospheric X-ray emission where electrons lose most of their energy, but also simultaneous emission from electrons as they are accelerated in the corona and propagate along magnetic field lines. FOXSI detects emission from high in the tenuous corona, where previous instruments have been blinded by nearby bright features and will fully characterizes the accelerated electrons and hottest plasmas as they evolve in energy, space, and time to solve the mystery of how impulsive energy release leads to solar eruptions, the primary drivers of space weather at Earth, and how those eruptions are energized and evolve., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 14 pages, 4 figures, 1 table

It is essential that there be coordinated and co-optimized observations in X-rays, gamma-rays, and EUV during the peak of solar cycle 26 (~2036) to significantly advance our understanding of impulsive energy release in the corona. The open questions include: What are the physical origins of space-weather events? How are particles accelerated at the Sun? How is impulsively released energy transported throughout the solar atmosphere? How is the solar corona heated? Many of the processes involved in triggering, driving, and sustaining solar eruptive events -- including magnetic reconnection, particle acceleration, plasma heating, and energy transport in magnetized plasmas -- also play important roles in phenomena throughout the Universe. This set of observations can be achieved through a single flagship mission or, with foreplanning, through a combination of major missions (e.g., the previously proposed FIERCE mission concept)., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 5 pages, 1 figure

Interplanetary solar radio type III bursts provide the means for remotely studying and tracking energetic electrons propagating in the interplanetary medium. Due to the lack of direct radio source imaging, several methods have been developed to determine the source positions from space-based observations. Moreover, none of the methods consider the propagation effects of anisotropic radio-wave scattering, which would strongly distort the trajectory of radio waves, delay their arrival times, and affect their apparent characteristics. We investigate the source positions and directivity of an interplanetary type III burst simultaneously observed by Parker Solar Probe, Solar Orbiter, STEREO, and Wind and compare the results of applying the intensity fit and timing methods with ray-tracing simulations of radio-wave propagation with anisotropic density fluctuations. The simulation calculates the trajectories of the rays, their time profiles at different viewing sites, and the apparent characteristics for various density fluctuation parameters. The results indicate that the observed source positions are displaced away from the locations where emission is produced, and their deduced radial distances are larger than expected from density models. This suggests that the apparent position is affected by anisotropic radio-wave scattering, which leads to an apparent position at a larger heliocentric distance from the Sun. The methods to determine the source positions may underestimate the apparent positions if they do not consider the path of radio-wave propagation and incomplete scattering at a viewing site close to the intrinsic source position., Comment: 7 pages, 4 figures

Understanding the nature of energetic particles in the solar atmosphere is one of the most important outstanding problems in heliophysics. Flare-accelerated particles compose a huge fraction of the flare energy budget; they have large influences on how events develop; they are an important source of high-energy particles found in the heliosphere; and they are the single most important corollary to other areas of high-energy astrophysics. Despite the importance of this area of study, this topic has in the past decade received only a small fraction of the resources necessary for a full investigation. For example, NASA has selected no new Explorer-class instrument in the past two decades that is capable of examining this topic. The advances that are currently being made in understanding flare-accelerated electrons are largely undertaken with data from EOVSA (NSF), STIX (ESA), and NuSTAR (NASA Astrophysics). This is despite the inclusion in the previous Heliophysics decadal survey of the FOXSI concept as part of the SEE2020 mission, and also despite NASA's having invested heavily in readying the technology for such an instrument via four flights of the FOXSI sounding rocket experiment. Due to that investment, the instrumentation stands ready to implement a hard X-ray mission to investigate flare-accelerated electrons. This white paper describes the scientific motivation for why this venture should be undertaken soon., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 15 pages, 5 figures

We present JDLL, an agile Java library that offers a comprehensive toolset/API to unify the development of high-end applications of DL for bioimage analysis and to streamline their installation and maintenance. JDLL provides all the functions required to consume DL models seamlessly, without being burdened by the configuration of the Python-based DL frameworks, within Java bioimage informatics platforms. Moreover, it allows the deployment of pre-trained models in the Bioimage Model Zoo (BMZ) by shipping the logic to connect to the BMZ website, download and run a selected model inference., Comment: New version with new figure and updated links

We present a multi-wavelength analysis of two flare-related jets on November 13, 2014, using data from SDO/AIA, RHESSI, Hinode/XRT, and IRIS. Unlike most coronal jets where hard X-ray (HXR) emissions are usually observed near the jet base, in these events HXR emissions are found at several locations, including in the corona. We carry out the first differential emission measure (DEM) analysis that combines both AIA (and XRT when available) bandpass filter data and RHESSI HXR measurements for coronal jets, and obtain self-consistent results across a wide temperature range and into non-thermal energies. In both events, hot plasma first appeared at the jet base, but as the base plasma gradually cooled, hot plasma also appeared near the jet top. Moreover, non-thermal electrons, while only mildly energetic, are found in multiple HXR locations and contain a large amount of total energy. Particularly, the energetic electrons that produced the HXR sources at the jet top were accelerated near the top location, rather than traveling from a reconnection site at the jet base. This means that there was more than one particle acceleration site in each event. Jet velocities are consistent with previous studies, including upward and downward velocities around ~200 km/s and ~100 km/s respectively, and fast outflows of 400-700 km/s. We also examine the energy partition in the later event, and find that the non-thermal energy in accelerated electrons is most significant compared to other energy forms considered. We discuss the interpretations and provide constraints on mechanisms for coronal jet formation., Comment: 18 pages, 12 figures

The Spectrometer/Telescope for Imaging X-rays (STIX) is one of the 10 instruments on-board the scientific payload of ESA's Solar Orbiter mission. STIX provides hard X-ray imaging spectroscopy in the 4-150~keV energy range, observing hard X-ray bremsstrahlung emission from the Sun. These observations provide diagnostics of the hottest thermal plasmas ($>$10~MK) and information on the non-thermal energetic electrons accelerated above 10~keV during solar flares. STIX has a spectral resolution of 1~keV, and employs the use of in-direct bi-grid Fourier imaging to spatially locate hard X-ray emission. Given that STIX provides critical information about accelerated electrons at the Sun through hard X-ray diagnostics, it is a powerful contribution to the Solar Orbiter suite and has a significant role to explore the dynamics of solar inputs to the heliosphere. This chapter describes the STIX instrument, its design, objectives, first observations and outlines the new perspectives STIX provides over the mission lifetime of Solar Orbiter., Comment: 18 pages, 11 figures, Book Chapter for Handbook of X-ray and Gamma-ray Astrophysics

Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, there has not been any direct observation of such sustained and persistent HXRs from the quiescent Sun. However, Hannah et al. in 2010 constrained the quiet Sun HXR emission using almost 12 days of quiescent solar-off-pointing observations by RHESSI. These observations set upper limits at $3.4\times 10^{-2}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ and $9.5\times 10^{-4}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 3-6 keV and 6-12 keV energy ranges, respectively. Observing feeble HXRs is challenging because it demands high sensitivity and dynamic range instruments in HXRs. The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment excels in these two attributes. Particularly, FOXSI completed its third successful flight (FOXSI-3) on September 7th, 2018. During FOXSI-3's flight, the Sun exhibited a fairly quiet configuration, displaying only one aged non-flaring active region. Using the entire $\sim$6.5 minutes of FOXSI-3 data, we constrained the quiet Sun emission in HXRs. We found $2\sigma$ upper limits in the order of $\sim 10^{-3}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 5-10 keV energy range. FOXSI-3's upper limit is consistent with what was reported by Hannah et al., 2010, but FOXSI-3 achieved this result using $\sim$1/2640 less time than RHESSI. A possible future spacecraft using FOXSI's concept would allow enough observation time to constrain the current HXR quiet Sun limits further or perhaps even make direct detections.

We demonstrate the use of dual-comb spectroscopy for isotope ratio measurements. We show that the analysis spectral range of a free-running near-infrared dual-comb spectrometer can be extended to the mid-infrared by difference frequency generation to target specific spectral regions suitable for such measurements, and especially the relative isotopic ratio $\delta {}^{13}$C. The measurements performed present a very good repeatability over several days with a standard deviation below 2$\unicode{x2030}$ for a recording time of a few tens of seconds, and the results are compatible with measurements obtained using an isotope ratio mass spectrometer. Our setup also shows the possibility to target several chemical species without any major modification, which can be used to measure other isotopic ratios. Further improvements could decrease the uncertainties of the measurements, and the spectrometer could thus compete with isotope ratio spectrometers currently available on the market., Comment: 10 pages, 6 figures

We use multi-spacecraft observations of invididual type III radio bursts in order to calculate the directivity of the radio emission, to be compared to the results of ray-tracing simulations of the radio-wave propagation and probe the plasma properties of the inner heliosphere. Ray-tracing simulations of radio-wave propagation with anisotropic scattering on density inhomogeneities are used to study the directivity of radio emissions. Simultaneous observations of type III radio bursts by four widely-separated spacecraft are used to calculate the directivity and position of the radio sources. The shape of the directivity pattern deduced for individual events is compared to the directivity pattern resulting from the ray-tracing simulations. We show that simultaneous observations of type radio III bursts by 4 different probes provide the opportunity to estimate the radio source positions and the directivity of the radio emission. The shape of the directivity varies from one event to another, and is consistent with anisotropic scattering of the radio-waves.

We compare the characteristics of flare-accelerated energetic electrons at the Sun with those injected into interplanetary space. We have identified 17 energetic electron events well-observed with the SEPT instrument aboard STEREO which show a clear association with a hard X-ray (HXR) flare observed with the RHESSI spacecraft. We compare the spectral indices of the RHESSI HXR spectra with those of the interplanetary electrons. Because of the frequent double-power-law shape of the in situ electron spectra, we paid special attention to the choice of the spectral index used for comparison. The time difference between the electron onsets and the associated type III and microwave bursts suggests that the electron events are detected at 1 AU with apparent delays ranging from 9 to 41 minutes. While the parent solar activity is clearly impulsive, also showing a high correlation with extreme ultraviolet jets, most of the studied events occur in temporal coincidence with coronal mass ejections (CMEs). In spite of the observed onset delays and presence of CMEs in the low corona, we find a significant correlation of about 0.8 between the spectral indices of the HXR flare and the in situ electrons. The correlations increase if only events with significant anisotropy are considered. This suggests that transport effects can alter the injected spectra leading to a strongly reduced imprint of the flare acceleration. We conclude that interplanetary transport effects must be taken into account when inferring the initial acceleration of solar energetic electron events. Although our results suggest a clear imprint of flare acceleration for the analyzed event sample, a secondary acceleration might be present which could account for the observed delays. However, the limited and variable pitch-angle coverage of SEPT could also be the reason for the observed delays., Comment: 16 pages, 8 figures

The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the AR12765 in June 2020, and compares the STIX measurements with GOES/XRS, SDO/AIA, and Hinode/XRT. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and SXR observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed., Comment: 19 pages, 11 figures

We study the release of energy during the gradual phase of a flare, characterized by faint bursts of non-thermal hard X-ray (HXR) emission associated with decimetric radio spikes and type III radio bursts starting at high frequencies and extending to the heliosphere. We characterize the site of electron acceleration in the corona and study the radial evolution of radio source sizes in the high corona. Imaging and spectroscopy of the HXR emission with Fermi and RHESSI provide a diagnostic of the accelerated electrons in the corona as well as a lower limit on the height of the acceleration region. Radio observations in the decimetric range with the ORFEES spectrograph provide radio diagnostics close to the acceleration region. Radio spectro-imaging with LOFAR in the meter range provide the evolution of the radio source sizes with their distance from the Sun, in the high corona. Non-thermal HXR bursts and radio spikes are well correlated on short timescales. The spectral index of non-thermal HXR emitting electrons is -4 and their number is about $2\times 10^{33}$ electrons/s. The density of the acceleration region is constrained between $1-5 \times 10^9$ cm$^{-3}$. Electrons accelerated upward rapidly become unstable to Langmuir wave production, leading to high starting frequencies of the type III radio bursts, and the elongation of the radio beam at its source is between 0.5 and 11.4 Mm. The radio source sizes and their gradient observed with LOFAR are larger than the expected size and gradient of the size of the electron beam, assuming it follows the expansion of the magnetic flux tubes. These observations support the idea that the fragmentation of the radio emission into spikes is linked to the fragmentation of the acceleration process itself. The combination of HXR and radio diagnostics in the corona provides strong constrains on the site of electron acceleration.

We study the nature of energy release and transfer for two sub-A class solar microflares observed during the second flight of the Focusing Optics X-ray Solar Imager (FOXSI-2) sounding rocket experiment on 2014 December 11. FOXSI is the first solar-dedicated instrument to utilize focusing optics to image the Sun in the hard X-ray (HXR) regime, sensitive to the energy range 4-20 keV. Through spectral analysis of the two microflares using an optically thin isothermal plasma model, we find evidence for plasma heated to temperatures of ~10 MK and emissions measures down to ~$10^{44}~$cm$^{-3}$. Though nonthermal emission was not detected for the FOXSI-2 microflares, a study of the parameter space for possible hidden nonthermal components shows that there could be enough energy in nonthermal electrons to account for the thermal energy in microflare 1, indicating that this flare is plausibly consistent with the standard thick-target model. With a solar-optimized design and improvements in HXR focusing optics, FOXSI-2 offers approximately five times greater sensitivity at 10 keV than the Nuclear Spectroscopic Telescope Array (NuSTAR) for typical microflare observations and allows for the first direct imaging spectroscopy of solar HXRs with an angular resolution at scales relevant for microflares. Harnessing these improved capabilities to study the evolution of small-scale events, we find evidence for spatial and temporal complexity during a sub-A class flare. These studies in combination with contemporanous observations by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) indicate that the evolution of these small microflares is more similar to that of large flares than to the single burst of energy expected for a nanoflare., Comment: 20 pages, 16 figures, 2 tables; Submitted to ApJ

Imaging X-rays by direct focusing offers greater sensitivity and a higher dynamic range compared to techniques based on indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors to observe the Sun in hard X-rays through direct focusing. Characterizing the performance of these optics is critical to optimize their performance and to understand their resulting data. In this paper, we present a ray-tracing simulation we created and developed to study Wolter-I X-ray mirrors. We validated the accuracy of the ray-tracing simulation by modeling the FOXSI rocket optics. We found satisfactory agreements between the simulation predictions and laboratory data measured on the optics. We used the ray-tracing simulation to characterize a background pattern of singly reflected rays (i.e., ghost rays) generated by photons at certain incident angles reflecting on only one of a two-segment Wolter-I figure and still reaching the focal plane. We used the results of the ray-tracing simulation to understand, and to formulate a set of strategies that can be used to mitigate, the impact of ghost rays on the FOXSI optical modules. These strategies include the optimization of aperture plates placed at the entrance and exit of the smallest Wolter-I mirror used in FOXSI, a honeycomb type collimator, and a wedge absorber placed at the telescope aperture. The ray-tracing simulation proved to be a reliable set of tools to study Wolter-I X-ray optics. It can be used in many applications, including astrophysics, material sciences, and medical imaging.

Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime., Comment: 20 pages, 1 figure, accepted by Astronomy & Astrophysics

Magnetic reconnection plays a crucial role in powering solar flares, production of energetic particles, and plasma heating. However, where the magnetic reconnections occur, how and where the released magnetic energy is transported, and how it is converted to other forms remain unclear. Here we report recurring bi-directional plasma outflows located within a large-scale plasma sheet observed in extreme ultraviolet emission and scattered white light during the post-impulsive gradual phase of the X8.2 solar flare on 2017 September 10. Each of the bi-directional outflows originates in the plasma sheet from a discrete site, identified as a magnetic reconnection site. These reconnection sites reside at very low altitudes ($< 180$ Mm, or 0.26 $R_{\odot}$) above the top of the flare arcade, a distance only $<3\%$ of the total length of a plasma sheet that extends to at least 10 $R_{\odot}$. Each arrival of sunward outflows at the looptop region appears to coincide with an impulsive microwave and X-ray burst dominated by a hot source (10-20 MK) at the looptop, which is immediately followed by a nonthermal microwave burst located in the loopleg region. We propose that the reconnection outflows transport the magnetic energy released at localized magnetic reconnection sites outward in the form of kinetic energy flux and/or electromagnetic Poynting flux. The sunward-directed energy flux induces particle acceleration and plasma heating in the post-flare arcades, observed as the hot and nonthermal flare emissions., Comment: 19 pages, 11 figures, accepted for publication in ApJ

In this paper we present the differential emission measures (DEMs) of two sub-A class microflares observed in hard X-rays (HXRs) by the FOXSI-2 sounding rocket experiment, on 2014 December 11. The second FOXSI (Focusing Optics X-ray Solar Imager) flight was coordinated with instruments Hinode/XRT and SDO/AIA, which provided observations in soft X-rays (SXR) and Extreme Ultraviolet (EUV). This unique dataset offers an unprecedented temperature coverage useful for characterizing the plasma temperature distribution of microflares. By combining data from FOXSI-2, XRT, and AIA, we determined a well-constrained DEM for the microflares. The resulting DEMs peak around 3MK and extend beyond 10MK. The emission measures determined from FOXSI-2 were lower than 10 26cm-5 for temperatures higher than 5MK; faint emission in this range is best measured in HXRs. The coordinated FOXSI-2 observations produce one of the few definitive measurements of the distribution and the amount of plasma above 5MK in microflares. We utilize the multi-thermal DEMs to calculate the amount of thermal energy released during both the microflares as ~ 5.0 x 10 28 ergs for Microflare 1 and ~ 1.6 x 10 28 ergs for Microflare 2. We also show the multi-thermal DEMs provide a more comprehensive thermal energy estimates than isothermal approximation, which systematically underestimates the amount of thermal energy released., Comment: Accepted for Publication in the Astrophysical Journal

Nonthermal loop-top sources in solar flares are the most prominent observational signature that suggests energy release and particle acceleration in the solar corona. Although several scenarios for particle acceleration have been proposed, the origin of the loop-top sources remains unclear. Here we present a model that combines a large-scale magnetohydrodynamic simulation of a two-ribbon flare with a particle acceleration and transport model for investigating electron acceleration by a fast-mode termination shock at the looptop. Our model provides spatially resolved electron distribution that evolves in response to the dynamic flare geometry. We find a concave-downward magnetic structure located below the flare termination shock, induced by the fast reconnection downflows. It acts as a magnetic trap to confine the electrons at the looptop for an extended period of time. The electrons are energized significantly as they cross the shock front, and eventually build up a power-law energy spectrum extending to hundreds of keV. We suggest that this particle acceleration and transport scenario driven by a flare termination shock is a viable interpretation for the observed nonthermal loop-top sources., Comment: submitted to ApJL

We present the statistical analysis of 33 flare-related coronal jets, and discuss the link between the jet and the flare properties in these events. We selected jets that were observed between 2010 and 2016 by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory (SDO) and are temporally and spatially associated to flares observed by the Reuven Ramaty High Energy Solar Spectrometric Imager (RHESSI). For each jet, we calculated the jet duration and projected velocity in the plane of sky. The jet duration distribution has a median of 18.8 minutes. The projected velocities are between 31 km/s and 456 km/s with a median at 210 km/s. For each associated flare, we performed X-ray imaging and spectroscopy and identify non-thermal emission. Non-thermal emission was detected in only 1/4 of the event considered. We did not find a clear correlation between the flare thermal energy or SXR peak flux and the jet velocity. A moderate anti-correlation was found between the jet duration and the flare SXR peak flux. There is no preferential time delay between the flare and the jet. The X-ray emission is generally located at the base of the jet. The analysis presented in this paper suggests that the flare and jet are part of the same explosive event, that the jet is driven by the propagation of an Alfvenic perturbation, and that the energy partition between flare and jets varies substantially from one event to another.

Why the tenuous solar outer atmosphere, or corona, is much hotter than the underlying layers remains one of the greatest challenge for solar modeling. Detailed diagnostics of the coronal thermal structure come from extreme ultraviolet (EUV) emission. The EUV emission is produced by heavy ions in various ionization states and depends on the amount of these ions and on plasma temperature and density. Any nonuniformity of the elemental distribution in space or variability in time affects thermal diagnostics of the corona. Here we theoretically predict ionized chemical element concentrations in some areas of the solar atmosphere, where the electric current is directed upward. We then detect these areas observationally, by comparing the electric current density with the EUV brightness in an active region. We found a significant excess in EUV brightness in the areas with positive current density rather than negative. Therefore, we report the observational discovery of substantial concentrations of heavy ions in current-carrying magnetic flux tubes, which might have important implications for the elemental fractionation in the solar corona known as the first ionization potential (FIP) effect. We call such areas of heavy ion concentration the "ion traps." These traps hold enhanced ion levels until they are disrupted by a flare whether large or small., Comment: ApJ in press; 10 pages, 5 figures

Imaging spectroscopy in X-rays with RHESSI provide the possibility to investigate the spatial evolution of the X-ray emitting electron distribution and therefore to study the transport effects on energetic electrons during solar flares. We study the energy dependence of the energetic electron scattering mean free path in the solar corona. We use the imaging spectroscopy technique with RHESSI to study the evolution of energetic electrons distribution in different part of the magnetic loop during the 2004 May 21 flare. These observations are compared with the radio observations of the gyrosynchrotron radiation of the same flare by Kuznetsov and Kontar (2015), and with the predictions of the diffusive transport model described by Kontar et al. (2014). The X-ray analysis shows a trapping of energetic electrons in the corona and a spectral hardening of the energetic electron distribution between the top of the loop and the footpoints. Coronal trapping of electrons is stronger for the radio-emitting electrons than for the X-ray-emitting electrons. These observations can be explained by the diffusive transport model derived by Kontar et al. (2014). We show that the combination of X-ray and radio diagnostics is a powerful tool to study electron transport in the solar corona in different energy domains. We show that the diffusive transport model can explain our observations; and in the range 25-500 keV, the electron scattering mean free path decreases with electron energy. We can estimate for the first time the scattering mean free path dependence on energy in the corona., Comment: 15 pages, accepted in A&A

How impulsive magnetic energy release leads to solar eruptions and how those eruptions are energized and evolve are vital unsolved problems in Heliophysics. The standard model for solar eruptions summarizes our current understanding of these events. Magnetic energy in the corona is released through drastic restructuring of the magnetic field via reconnection. Electrons and ions are then accelerated by poorly understood processes. Theories include contracting loops, merging magnetic islands, stochastic acceleration, and turbulence at shocks, among others. Although this basic model is well established, the fundamental physics is poorly understood. HXR observations using grazing-incidence focusing optics can now probe all of the key regions of the standard model. These include two above-the-looptop (ALT) sources which bookend the reconnection region and are likely the sites of particle acceleration and direct heating. The science achievable by a direct HXR imaging instrument can be summarized by the following science questions and objectives which are some of the most outstanding issues in solar physics (1) How are particles accelerated at the Sun? (1a) Where are electrons accelerated and on what time scales? (1b) What fraction of electrons is accelerated out of the ambient medium? (2) How does magnetic energy release on the Sun lead to flares and eruptions? A Focusing Optics X-ray Solar Imager (FOXSI) instrument, which can be built now using proven technology and at modest cost, would enable revolutionary advancements in our understanding of impulsive magnetic energy release and particle acceleration, a process which is known to occur at the Sun but also throughout the Universe., Comment: Next Generation Solar Physics Mission white paper, 2 figures