Search

Abstract Traumatic brain injury (TBI) can result in long-lasting changes in hippocampal function. The changes induced by TBI on the hippocampus contribute to cognitive deficits. The adult hippocampus harbors neural stem cells (NSCs) that generate neurons (neurogenesis), and astrocytes (astrogliogenesis). While deregulation of hippocampal NSCs and neurogenesis have been observed after TBI, it is not known how TBI may affect hippocampal astrogliogenesis. Using a controlled cortical impact model of TBI in male mice, single cell RNA sequencing and spatial transcriptomics, we assessed how TBI affected hippocampal NSCs and the neuronal and astroglial lineages derived from them. We observe an increase in NSC-derived neuronal cells and a concomitant decrease in NSC-derived astrocytic cells, together with changes in gene expression and cell dysplasia within the dentate gyrus. Here, we show that TBI modifies NSC fate to promote neurogenesis at the cost of astrogliogenesis and identify specific cell populations as possible targets to counteract TBI-induced cellular changes in the adult hippocampus.

Abstract Streptococcus pyogenes can cause invasive disease with high mortality despite adequate antibiotic treatments. To address this unmet need, we have previously generated an opsonic IgG1 monoclonal antibody, Ab25, targeting the bacterial M protein. Here, we engineer the IgG2-4 subclasses of Ab25. Despite having reduced binding, the IgG3 version promotes stronger phagocytosis of bacteria. Using atomic simulations, we show that IgG3’s Fc tail has extensive movement in 3D space due to its extended hinge region, possibly facilitating interactions with immune cells. We replaced the hinge of IgG1 with four different IgG3-hinge segment subclasses, IgGhxx. Hinge-engineering does not diminish binding as with IgG3 but enhances opsonic function, where a 47 amino acid hinge is comparable to IgG3 in function. IgGh47 shows improved protection against S. pyogenes in a systemic infection mouse model, suggesting that IgGh47 has promise as a preclinical therapeutic candidate. Importantly, the enhanced opsonic function of IgGh47 is generalizable to diverse S. pyogenes strains from clinical isolates. We generated IgGh47 versions of anti-SARS-CoV-2 mAbs to broaden the biological applicability, and these also exhibit strongly enhanced opsonic function compared to the IgG1 subclass. The improved function of the IgGh47 subclass in two distant biological systems provides new insights into antibody function.

Abstract This dataset represents a collection of pocket-centric structural data related to protein-protein interactions (PPIs) and PPI-related ligand binding sites. The dataset includes high-quality structural information on more than 23,000 pockets, 3,700 proteins on more than 500 organisms, and nearly 3500 ligands that can aid researchers in the fields of bioinformatics, structural biology, and drug discovery. It encompasses a diverse set of PPI complexes with more than 1,700 unique protein families including some with associated ligands, enabling detailed investigations into molecular interactions at the atomic level. This article introduces an indispensable resource designed to unlock the full potential of PPIs while pioneering a novel metric for pocket similarity for hypothesizing protein partners repurposing.

The current richness of sequence data needs efficient methodologies to display and analyze the complexity of the information in a compact and readable manner. Traditionally, phylogenetic trees and sequence similarity networks have been used to display and analyze sequences of protein families. These methods aim to shed light on key computational biology problems such as sequence classification and functional inference. Here, we present a new methodology, AlignScape, based on self-organizing maps. AlignScape is applied to three large families of proteins: the kinases and GPCRs from human, and bacterial T6SS proteins. AlignScape provides a map of the similarity landscape and a tree representation of multiple sequence alignments These representations are useful to display, cluster, and classify sequences as well as identify functional trends. The efficient GPU implementation of AlignScape allows the analysis of large MSAs in a few minutes. Furthermore, we show how the AlignScape analysis of proteins belonging to the T6SS complex can be used to predict coevolving partners.

The transformation of modern industries towards enhanced sustainability is facilitated by green technologies that rely extensively on rare earth elements (REEs) such as cerium (Ce), neodymium (Nd), terbium (Tb), and lanthanum (La). The occurrence of productive mining sites, e.g., is limited, and production is often costly and environmentally harmful. As a consequence of increased utilization, REEs enter our ecosystem as industrial process water or wastewater and become highly diluted. Once diluted, they can hardly be recovered by conventional techniques, but using cyanobacterial biomass in a biosorption-based process is a promising eco-friendly approach. Cyanobacteria can produce extracellular polymeric substances (EPS) that show high affinity to metal cations. However, the adsorption of REEs by EPS has not been part of extensive research. Thus, we evaluated the role of EPS in the biosorption of Ce, Nd, Tb, and La for three terrestrial, heterocystous cyanobacterial strains. We cultivated them under N-limited and non-limited conditions and extracted their EPS for compositional analyses. Subsequently, we investigated the metal uptake of a) the extracted EPS, b) the biomass extracted from EPS, and c) the intact biomass with EPS by comparing the amount of sorbed REEs. Maximum adsorption capacities for the tested REEs of extracted EPS were 123.9–138.2 mg g−1 for Komarekiella sp. 89.12, 133.1–137.4 mg g−1 for Desmonostoc muscorum 90.03, and 103.5–129.3 mg g−1 for Nostoc sp. 20.02. A comparison of extracted biomass with intact biomass showed that 16% (Komarekiella sp. 89.12), 28% (Desmonostoc muscorum 90.03), and 41% (Nostoc sp. 20.02) of REE adsorption was due to the biosorption of the extracellular EPS. The glucose- rich EPS (15%–43% relative concentration) of all three strains grown under nitrogen-limited conditions showed significantly higher biosorption rates for all REEs. We also found a significantly higher maximum adsorption capacity of all REEs for the extracted EPS compared to cells without EPS and untreated biomass, highlighting the important role of the EPS as a binding site for REEs in the biosorption process. EPS from cyanobacteria could thus be used as efficient biosorbents in future applications for REE recycling, e.g., industrial process water and wastewater streams.

Moiré superlattices of van der Waals heterostructures provide a powerful way to engineer electronic structures of two-dimensional materials. Many novel quantum phenomena have emerged in graphene and transition metal dichalcogenide moiré systems. Twisted phosphorene offers another attractive system to explore moiré physics because phosphorene features an anisotropic rectangular lattice, different from isotropic hexagonal lattices previously reported. Here we report emerging anisotropic moiré optical transitions in twisted monolayer/bilayer phosphorenes. The optical resonances in phosphorene moiré superlattice depend sensitively on twist angle and are completely different from those in the constitute monolayer and bilayer phosphorene even for a twist angle as large as 19°. Our calculations reveal that the Γ-point direct bandgap and the rectangular lattice of phosphorene give rise to the remarkably strong moiré physics in large-twist-angle phosphorene heterostructures. This work highlights fresh opportunities to explore moiré physics in phosphorene and other van der Waals heterostructures with different lattice configurations.

A. baumannii can rapidly acquire new resistance mechanisms and persist on abiotic surface, enabling the colonization of asymptomatic human host. In Acinetobacter the type VI secretion system (T6SS) is involved in twitching, surface motility and is used for interbacterial competition allowing the bacteria to uptake DNA. A. baumannii possesses a T6SS that has been well studied for its regulation and specific activity, but little is known concerning its assembly and architecture. The T6SS nanomachine is built from three architectural sub-complexes. Unlike the baseplate (BP) and the tail-tube complex (TTC), which are inherited from bacteriophages, the membrane complex (MC) originates from bacteria. The MC is the most external part of the T6SS and, as such, is subjected to evolution and adaptation. One unanswered question on the MC is how such a gigantesque molecular edifice is inserted and crosses the bacterial cell envelope. The A. baumannii MC lacks an essential component, the TssJ lipoprotein, which anchors the MC to the outer membrane. In this work, we studied how A. baumannii compensates the absence of a TssJ. We have characterized for the first time the A. baumannii's specific T6SS MC, its unique characteristic, its membrane localization, and assembly dynamics. We also defined its composition, demonstrating that its biogenesis employs three Acinetobacter-specific envelope-associated proteins that define an intricate network leading to the assembly of a five-proteins membrane super-complex. Our data suggest that A. baumannii has divided the function of TssJ by (1) co-opting a new protein TsmK that stabilizes the MC and by (2) evolving a new domain in TssM for homo-oligomerization, a prerequisite to build the T6SS channel. We believe that the atypical species-specific features we report in this study will have profound implication in our understanding of the assembly and evolutionary diversity of different T6SSs, that warrants future investigation.

Red phosphorus offers a high theoretical sodium capacity and has been considered as a candidate anode for sodium-ion batteries. Similar to silicon anodes for lithium-ion batteries, the electrochemical performance of red phosphorus is plagued by the large volume variation upon sodiation. Here we perform in situ transmission electron microscopy analysis of the synthesized red-phosphorus-impregnated carbon nanofibers with the corresponding chemo-mechanical simulation, revealing that, the sodiated red phosphorus becomes softened with a liquid-like mechanical behaviour and gains superior malleability and deformability against pulverization. The encapsulation strategy of the synthesized red-phosphorus-impregnated carbon nanofibers has been proven to be an effective method to minimize the side reactions of red phosphorus in sodium-ion batteries, demonstrating stable electrochemical cycling. Our study provides a valid guide towards high-performance red-phosphorus-based anodes for sodium-ion batteries.

The analysis of the function of acylamino acid-releasing enzymes (AARE) in Physcomitrella and Arabidopsis reveals a connection between AARE and plant ageing, suggesting a unified concept of ageing may exist across domains of life.

Mitochondria power the beating heart. Here, Donnarumma et al. show that loss of the inner mitochondrial membrane protein MTFP1 in cardiomyocytes reduces bioenergetic efficiency and cell death resistance leading to heart failure in mice.

Structural and spatial aspects of cell degradation are studied using a combination of diffraction-and imaging-based tools applying laboratory X-rays, neutron scattering and synchrotron radiation with electrochemical and thermal characterization. Experimental characterization is carried out on cylindrical cells of 21700-type, where four regimes of cell degradation are identified, which are supplemented by an increased cell resistance and surface temperature during cell operation. The amount of intercalated lithium in the fully charged anodes in the fresh and aged states is determined by ex situ X-ray diffraction radiography and in situ X-ray diffraction computed tomography. The qualitatively similar character of the results revealed a loss of active lithium along with the development of a complex heterogeneous distribution over the electrode stripe.

As a part of the transition in higher-level energy systems, distributed cross-sectoral energy systems (DCESs) play a crucial role in providing flexibility in covering residual load (RL). However, there is currently no method available to quantify the potential flexibility of DCESs in covering RL. This study aimed to address this gap by comparing the RL demand of a higher-level energy system with the electricity flow between a DCES and the electricity grid. This can allow for the quantification of the flexibility of DCES operation. Our approach was to categorize existing methods for flexibility quantification and then propose a new method to assess the flexibility of DCESs in covering RL. For this, we introduced a new quantification indicator called the Flexibility Deployment Index (FDI), which integrates two factors: the RL of the higher-level energy system and the electricity purchase and feed-in of a DCES. By normalizing both factors, we could compare the flexibility to cover RL with respect to different DCES concepts and scenarios. To validate the developed quantification method, we applied it to a case study of a hospital’s DCES in Germany. Using an MILP optimization model, we analyzed the variation in FDI for different technology concepts and scenarios, including fixed electricity tariffs, dynamic electricity tariffs, and CO2-emission-optimized operation. The results of our calculations and the application of the FDI indicate that high-capacity combined heat and power units combined with thermal storage units provide higher flexibility. Additionally, the results highlight higher flexibility provision during the winter period compared to the summer period. However, further application and research are needed to confirm the robustness and validity of the FDI assessment. Nonetheless, the case study demonstrates the potential of the new quantification method.

Women have a higher prevalence of osteoarthritis (OA) and worse clinical courses than men. However, the underlying factors and therapeutic outcomes of these sex-specific differences are incompletely researched. This review examines the current state of knowledge regarding sex differences in OA prevalence, risk factors, pain severity, functional outcomes, and use and response to therapeutics. PubMed database was used with the title keyword combinations "{gender OR sex} AND osteoarthritis" plus additional manual search of the included papers for pertinent references, yielding 212 references. Additional references were added and 343 were reviewed for appropriateness. Globally, women account for 60% of people with osteoarthritis, with a greater difference after age 40. The higher risk for women may be due to differences in joint anatomy, alignment, muscle strength, hormonal influences, obesity, and/or genetics. At the same radiographic severity, women have greater pain severity than men, which may be explained by biologically distinct pain pathways, differential activation of central pain pathways, differences in pain sensitivity, perception, reporting, and coping strategies. Women have greater limitations of physical function and performance than men independent of BMI, OA severity, injury history, and amount of weekly exercise. Women also have greater use of analgesic medications than men but less use of arthroplasty and poorer prognosis after surgical interventions. The recognition of sex differences in OA manifestations and management could guide tailoring of sex-specific treatment protocols, and analysis of sex as a biological variable in future research would enhance development of precision medicine. [ABSTRACT FROM AUTHOR]

Biosorption of metal ions by phototrophic microorganisms is regarded as a sustainable and alternative method for bioremediation and metal recovery. In this study, 12 cyanobacterial strains, including 7 terrestrial and 5 aquatic cyanobacteria, covering a broad phylogenetic diversity were investigated for their potential application in the enrichment of rare earth elements through biosorption. A screening for the maximum adsorption capacity of cerium, neodymium, terbium, and lanthanum was conducted in which Nostoc sp. 20.02 showed the highest adsorption capacity with 84.2–91.5 mg g-1. Additionally, Synechococcus elongatus UTEX 2973, Calothrix brevissima SAG 34.79, Desmonostoc muscorum 90.03, and Komarekiella sp. 89.12 were promising candidate strains, with maximum adsorption capacities of 69.5–83.4 mg g-1, 68.6–83.5 mg g-1, 44.7–70.6 mg g-1, and 47.2–67.1 mg g-1 respectively. Experiments with cerium on adsorption properties of the five highest metal adsorbing strains displayed fast adsorption kinetics and a strong influence of the pH value on metal uptake, with an optimum at pH 5 to 6. Studies on binding specificity with mixed-metal solutions strongly indicated an ion-exchange mechanism in which Na+, K+, Mg2+, and Ca2+ ions are replaced by other metal cations during the biosorption process. Depending on the cyanobacterial strain, FT-IR analysis indicated the involvement different functional groups like hydroxyl and carboxyl groups during the adsorption process. Overall, the application of cyanobacteria as biosorbent in bioremediation and recovery of rare earth elements is a promising method for the development of an industrial process and has to be further optimized and adjusted regarding metal-containing wastewater and adsorption efficiency by cyanobacterial biomass.

Pompe disease is currently treated with enzyme replacement therapy (ERT) with recombinant human acid alpha-glucosidase (GAA). Here, the authors show hepatic-directed gene therapy with AAV vectors enhances GAA bioavailability compared with ERT, resulting in improved rescue of the disease phenotype in mice and broad enzyme distribution in mice and non-human primates.

Ribosome profiling has become the gold standard to analyze mRNA translation dynamics, and the translation inhibitor cycloheximide (CHX) is often used in its application. Here the authors systematically demonstrate that CHX does not bias the outcome of ribosome profiling experiments in most organisms.

Twisted phosphorene offers another attractive system to explore moiré physics. Here, the authors report emerging anisotropic moiré optical resonances in twisted monolayer/bilayer phosphorene, exhibiting strong twist dependence for angles as large as 19°.

A new metastable phase, featuring a lithium-stabilized mixed-valence cobalt(II,III) hydroxide phosphate framework, Co11.0(1)Li1.0(2)[(OH)5O][(PO3OH)(PO4)5], corresponding to the simplified composition Co1.84(2)Li0.16(3)(OH)PO4, is prepared by hydrothermal synthesis. Because the pH-dependent formation of other phases such as Co3(OH)2(PO3OH)2 and olivine-type LiCoPO4 competes in the process, a pH value of 5.0 is crucial for obtaining a single-phase material. The crystals with dimensions of 15 μm × 30 μm exhibit a unique elongated triangular pyramid morphology with a lamellar fine structure. Powder X-ray diffraction experiments reveal that the phase is isostructural with the natural phosphate minerals holtedahlite and satterlyite, and crystallizes in the trigonal space group P31m (a = 11.2533(4) Å, c = 4.9940(2) Å, V = 547.70(3) Å3, Z = 1). The three-dimensional network structure is characterized by partially Li-substituted, octahedral [M2O8(OH)] (M = Co, Li) dimer units which form double chains that run along the [001] direction and are connected by [PO4] and [PO3(OH)] tetrahedra. Because no Li-free P31m-type Co2(OH)PO4 phase could be prepared, it can be assumed that the Li ions are crucial for the stabilization of the framework. Co L-edge X-ray absorption spectroscopy demonstrates that the cobalt ions adopt the oxidation states +2 and +3 and hence provides further evidence for the incorporation of Li in the charge-balanced framework. The presence of three independent hydroxyl groups is further confirmed by infrared spectroscopy. Magnetization measurements imply a paramagnetic to antiferromagnetic transition at around T = 25 K as well as a second transition at around 9-12 K with a ferromagnetic component below this temperature. The metastable character of the phase is demonstrated by thermogravimetric analysis and differential scanning calorimetry, which above 558 °C reveal a two-step decomposition to CoO, Co3(PO4)2, and olivine-type LiCoPO4 with release of water and oxygen.

The majority of research activities on LiCoPO4 are focused on the phospho-olivine (space group Pnma), which is a promising high-voltage cathode material for Li-ion batteries. In contrast, comparably little is known about its metastable Pna21 modification. Herein, we present a comprehensive study on the structure–property relationships of 15–20 nm Pna21-LiCoPO4 nanospheres prepared by a simple microwave-assisted solvothermal process. Unlike previous reports, the results indicate that the compound is non-stoichiometric and shows cation-mixing with Co ions on the Li sites, which provides an explanation for the poor electrochemical performance. Co L2,3-edge X-ray absorption spectroscopic data confirm the local tetrahedral symmetry of Co2+. Comprehensive studies on the thermal stability using thermogravimetric analysis, differential scanning calorimetry, and in situ powder X-ray diffraction show an exothermic phase transition to olivine Pnma-LiCoPO4 at 527 °C. The influence of the atmosphere and the particle size on the thermal stability is also investigated.

The majority of research activities on LiCoPO4 are focused on the phospho-olivine (space group Pnma), which is a promising high-voltage cathode material for Li-ion batteries. In contrast, comparably little is known about its metastable Pna21 modification. Herein, we present a comprehensive study on the structure–property relationships of 15–20 nm Pna21-LiCoPO4 nanospheres prepared by a simple microwave-assisted solvothermal process. Unlike previous reports, the results indicate that the compound is non-stoichiometric and shows cation-mixing with Co ions on the Li sites, which provides an explanation for the poor electrochemical performance. Co L2,3-edge X-ray absorption spectroscopic data confirm the local tetrahedral symmetry of Co2+. Comprehensive studies on the thermal stability using thermogravimetric analysis, differential scanning calorimetry, and in situ powder X-ray diffraction show an exothermic phase transition to olivine Pnma-LiCoPO4 at 527 °C. The influence of the atmosphere and the particle size on the thermal stability is also investigated.

Particle size-tuned platelets of the high-voltage cathode material LiCoPO4 for Li-ion batteries have been synthesized by a simple one-step microwave-assisted solvothermal process using an array of water/ethylene glycol (EG) solvent mixtures. Particle size control was achieved by altering the concentration of the EG co-solvent in the mixture between 0 and 100 vol%, with amounts of 0–80 vol% EG producing single phase, olivine-type LiCoPO4. The particle sizes of the olivine materials were significantly reduced from about 1.2 μm × 1.2 μm × 500 nm (0 vol% EG) to 200 nm × 100 nm × 50 nm (80 vol% EG) with increasing EG content, while specific surface areas increased from 2 to 13 m2 g-1. The particle size reduction could mainly be attributed to the modified viscosities of the solvent blends. Owing to the soft template effect of EG, the crystals exhibited the smallest dimensions along the [010] direction of the Li diffusion pathways in the olivine crystal structure, resulting in enhanced lithium diffusion properties. The relationship between the synthesis, crystal properties and electrochemical performance was further elucidated, indicating that the electrochemical performances of the as-prepared materials mainly depend on the solvent composition and the respective particle size range. LiCoPO4 products obtained from reaction media with low and high EG contents exhibited good electrochemical performances (initial discharge capacities of 87–124 mAh g−1 at 0.1 C), whereas materials made from medium EG concentrations (40–60 vol% EG) showed the highest capacities and gravimetric energy densities (up to 137 mAh g−1 and 658 Wh kg−1 at 0.1 C), excellent rate capabilities, and cycle life.

Particle size-tuned platelets of the high-voltage cathode material LiCoPO4 for Li-ion batteries have been synthesized by a simple one-step microwave-assisted solvothermal process using an array of water/ethylene glycol (EG) solvent mixtures. Particle size control was achieved by altering the concentration of the EG co-solvent in the mixture between 0 and 100 vol%, with amounts of 0–80 vol% EG producing single phase, olivine-type LiCoPO4. The particle sizes of the olivine materials were significantly reduced from about 1.2 μm × 1.2 μm × 500 nm (0 vol% EG) to 200 nm × 100 nm × 50 nm (80 vol% EG) with increasing EG content, while specific surface areas increased from 2 to 13 m2 g-1. The particle size reduction could mainly be attributed to the modified viscosities of the solvent blends. Owing to the soft template effect of EG, the crystals exhibited the smallest dimensions along the [010] direction of the Li diffusion pathways in the olivine crystal structure, resulting in enhanced lithium diffusion properties. The relationship between the synthesis, crystal properties and electrochemical performance was further elucidated, indicating that the electrochemical performances of the as-prepared materials mainly depend on the solvent composition and the respective particle size range. LiCoPO4 products obtained from reaction media with low and high EG contents exhibited good electrochemical performances (initial discharge capacities of 87–124 mAh g−1 at 0.1 C), whereas materials made from medium EG concentrations (40–60 vol% EG) showed the highest capacities and gravimetric energy densities (up to 137 mAh g−1 and 658 Wh kg−1 at 0.1 C), excellent rate capabilities, and cycle life.

While the majority of research activities on LiCoPO4 is focussed on the thermodynamically stable olivine-type Pnma polymorph, the metastable Pna21 and Cmcm modifications have recently attracted considerable attention due to their interesting material properties. In this study, we present the first Li-deficient structural derivative of the Cmcm modification with the nominal composition Li0.5-δCoPO4. As opposed to the substoichiometric olivine (Pnma) phases LixCoPO4 (x = 0; 2/3), which are exclusively accessible by electrochemical or chemical Li extraction techniques, this is also the first time that a direct soft-chemical synthesis route towards a LixCoPO4-type material is accomplished. X-ray and neutron diffraction studies indicate that Cmcm-type Li0.5-δCoPO4 shows vacancies on both the Li and Co sites, whereas X-ray absorption spectra demonstrate that the structure features heterovalent Co ions (+2/+3) to compensate for the Li deficit. Magnetic measurements reveal a long-range antiferromagnetic order below 10.5 K. A thorough investigation of the thermal stability using thermogravimetric analysis, differential scanning calorimetry, and temperature-dependent in situ X-ray powder diffraction demonstrates that Li0.5-δCoPO4 is metastable and exhibits a complex, multi-step thermal decomposition mechanism. In the first step at 394 °C, it decomposes to α-Co2P2O7 (P21/c) and LiCoPO4 (Cmcm) upon O2 release. The LiCoPO4 (Cmcm) intermediate is then irreversibly transformed to olivine-type LiCoPO4 (Pnma) at 686 °C. The material properties of Li0.5-δCoPO4 are further compared to the fully lithiated, isostructural LiCoPO4 (Cmcm) phase, for which an improved structure solution as well as Co L2,3-edge X-ray absorption spectra are reported for the first time.

While the majority of research activities on LiCoPO4 is focussed on the thermodynamically stable olivine-type Pnma polymorph, the metastable Pna21 and Cmcm modifications have recently attracted considerable attention due to their interesting material properties. In this study, we present the first Li-deficient structural derivative of the Cmcm modification with the nominal composition Li0.5-δCoPO4. As opposed to the substoichiometric olivine (Pnma) phases LixCoPO4 (x = 0; 2/3), which are exclusively accessible by electrochemical or chemical Li extraction techniques, this is also the first time that a direct soft-chemical synthesis route towards a LixCoPO4-type material is accomplished. X-ray and neutron diffraction studies indicate that Cmcm-type Li0.5-δCoPO4 shows vacancies on both the Li and Co sites, whereas X-ray absorption spectra demonstrate that the structure features heterovalent Co ions (+2/+3) to compensate for the Li deficit. Magnetic measurements reveal a long-range antiferromagnetic order below 10.5 K. A thorough investigation of the thermal stability using thermogravimetric analysis, differential scanning calorimetry, and temperature-dependent in situ X-ray powder diffraction demonstrates that Li0.5-δCoPO4 is metastable and exhibits a complex, multi-step thermal decomposition mechanism. In the first step at 394 °C, it decomposes to α-Co2P2O7 (P21/c) and LiCoPO4 (Cmcm) upon O2 release. The LiCoPO4 (Cmcm) intermediate is then irreversibly transformed to olivine-type LiCoPO4 (Pnma) at 686 °C. The material properties of Li0.5-δCoPO4 are further compared to the fully lithiated, isostructural LiCoPO4 (Cmcm) phase, for which an improved structure solution as well as Co L2,3-edge X-ray absorption spectra are reported for the first time.

Cystic fibrosis (CF) is caused by two mutations in the Cystic Fibrosis Transmembrane Conductance Regulator ( CFTR ) gene. In the last years, drugs targeting the underlying protein defect like lumacaftor/ivacaftor (LUM/IVA) or tezacaftor/ivacaftor (TEZ/IVA) and more recently elexacaftor/tezacaftor/ivacaftor (ELX/TEZ/IVA) were admitted. Outcome parameters evaluating therapy response like forced expiratory pressure in 1 s (FEV 1 ), body mass index (BMI) or the efficacy of CFTR function in sweat glands showed improvement in several cases. Other, CFTR biomarkers were analysed rarely. This prospective observational study was aimed at evaluating CFTR function in patients treated with different CFTR modulators together with common valid clinical outcome parameters at standardized appointments (day 0, week 2, 4, 16). We followed four patients with the same mutation ( F508del-CFTR ), sex, age and disease severity. Monitoring focused on lung function, gastrointestinal aspects and CFTR function of sweat glands, nasal and intestinal epithelium. Sweat tests were performed by pilocarpine iontophoresis. Nasal potential difference (NPD) measured transepithelial voltage in vivo and potential increased when CFTR function improved. Rectal biopsies were obtained for intestinal current measurements (ICM) ex vivo . Intestinal CFTR function was assessed by stimulating chloride secretion with different reagents. Response to CFTR modulators regarding clinical outcome parameters was rather variable. A sweat chloride reduction of 35.3 mmol/L, nasal CFTR rescue of 4.4% and fivefold higher CFTR function in the intestine was seen at week 16 post-LUM/IVA. Due to our monitoring, we identified a non-responder to LUM/IVA and TEZ/IVA. In case of ELX/TEZ/IVA, clinical parameters and CFTR bioassays improved and were concordant. Although our cohort is small, results emphasize that non-responders exist and conclusions could not be drawn if patients were not monitored. Data on CFTR function can confirm or disprove ongoing CFTR dysfunction and might be helpful selectively. Non-responders need other alternative therapy options as demonstrated with ELX/TEZ/IVA.

Leptospira interrogans are pathogenic bacteria responsible for leptospirosis, a zoonosis impacting 1 million people per year worldwide. Leptospires can infect all vertebrates, but not all hosts develop similar symptoms. Human and cattle may suffer from mild to acute illnesses and are therefore considered as sensitive to leptospirosis. In contrast, mice and rats remain asymptomatic upon infection, although they get chronically colonized in their kidneys. Upon infection, leptospires are stealth pathogens that partially escape the recognition by the host innate immune system. Although leptospires are mainly extracellular bacteria, it was suggested that they could also replicate within macrophages. However, contradictory data in the current literature led us to reevaluate these findings. Using a gentamicin–protection assay coupled to high-content (HC) microscopy, we observed that leptospires were internalized in vivo upon peritoneal infection of C57BL/6J mice. Additionally, three different serotypes of pathogenic L. interrogans and the saprophytic L. biflexa actively infected both human (PMA differentiated) THP1 and mouse RAW264.7 macrophage cell lines. Next, we assessed the intracellular fate of leptospires using bioluminescent strains, and we observed a drastic reduction in the leptospiral intracellular load between 3 h and 6 h post-infection, suggesting that leptospires do not replicate within these cells. Surprisingly, the classical macrophage microbicidal mechanisms (phagocytosis, autophagy, TLR–mediated ROS, and RNS production) were not responsible for the observed decrease. Finally, we demonstrated that the reduction in the intracellular load was associated with an increase of the bacteria in the supernatant, suggesting that leptospires exit both human and murine macrophages. Overall, our study reevaluated the intracellular fate of leptospires and favors an active entrance followed by a rapid exit, suggesting that leptospires do not have an intracellular lifestyle in macrophages.

Purpose: A systematic review was conducted to identify facilitators and barriers to movement integration (MI) in elementary school classrooms. Method: Online databases (Educational Resources Information Center, Google Scholar, PsycINFO, and PubMed) served as data sources for the study. Following the PRISMA guidelines, relevant published research on MI was identified and screened for inclusion in a qualitative synthesis. Content analysis of the included articles (N = 28) was used to identify themes of MI facilitators and barriers. Facilitators and barriers were then categorized using a social-ecological framework. Results: A total of 12 themes of MI facilitators and barriers were identified and categorized into two social-ecological levels: institutional factors (e.g., administrative support, resources) and intrapersonal factors (e.g., teacher confidence, ease of implementation). Conclusion: This review can inform research and practice aimed at supporting the implementation of MI in elementary classrooms.

Previous research has not explored the potential of distance learning to prepare preservice teachers (PCTs) for promoting children's physical activity. The purpose of this study was to (a) examine the perceptions and experiences of PCTs, inservice classroom teachers, university instructors, and elementary students who were involved in a semester-long distance delivery course that included a service-learning (SL) component with an emphasis on classroom movement integration (MI). Using a qualitative single case study design, interviews, observations, and artifacts (e.g. PCTs' reflections and academic work) were thematically analyzed. Findings produced three themes including student-centered approach, benefit/importance of physical activity, and connect and reflect. These themes showed that participants' perceptions and experiences support constructivist-guided SL using a distance delivery design. This study adds to the emerging research base on school-university partnerships to support schools in the implementation of comprehensive school physical activity programming.