Search

Ma&lstrok;gorzata Szymala-P&eogon;dzik,1 Joanna &Zdot;órawska,1 Jacek Ciach2 1Department of Geriatrics, Wroclaw Medical University, Wroc&lstrok;aw, Poland; 2Department of Human Morphology and Embryology, Wroclaw Medical University, Wroc&lstrok;aw, PolandCorrespondence: Joanna &Zdot;órawskaDepartment of Geriatrics, Wroclaw Medical University, Wroc&lstrok;aw, PolandEmail joannazor@interia.plIntroduction: According to the current data, regardless of the method used to estimate GFR, the differences between the obtained results should be insignificant and do not imply therapeutic decisions. The aim of this study was to analyze and compare the eGFR results with the estimated creatinine clearance score calculated according to the Cockroft-Gault equation, and to assess the significance of the difference between these two results.Sample and Methods: A study group was constituted of 115 patients, of whom 76 were women and 39 men at the age range of 55– 93 years, with a median of 79 years. The study analyzed differences in the assessment of kidney function by comparing the results of eGFR assessed by MDRD method obtained from the laboratory with the calculated values of creatinine clearance using the Cockroft-Gault formula, and examining the correlation between the difference D = eGFR -eClCr and BMI and body surface.Results: In the entire group of patients (N = 115), the significant statistical difference was found between eGFR and eClCr. In the subgroup of patients (N = 45) with the lower baseline eGFR < 60, there was no significant difference between eGFR and eClCr, while in the subgroup of patients with baseline eGFR ≥ 60 (N = 75), there was a significant difference between eGFR and eClCr. The study showed that based on the estimated GFR using both methods (C-G and MDRD), 29.2% and 32.4% of patients, respectively, were incorrectly assigned to given stage of chronic kidney disease.Conclusion: Proper assessment of kidney function is very important in order to properly drugs dosing, especially to adjust the doses of drugs metabolized by the kidneys in order to avoid or minimize their nephrotoxic effects.Keywords: geriatric patients, kidney function, drug dosing

With rising demand for wood products and reduced wood harvesting due to the European Green Deal, alternative lignocellulosic materials for insulation are necessary. In this work, we manufactured reference particleboard from industrial particles and fifteen different board variants from alternative lignocellulosic plants material, i.e., five types of perennial plant biomass in three substitutions: 30, 50 and 75% of their share in the board with a nominal density of 250 kg/m 3 . Within the analysis of manufactured boards, the mechanical, chemical and thermal properties were investigated-internal bond, formaldehyde emissions, thermal insulation, heat transfer coefficient and thermal conductivity. In the case of thermal conductivity, the most promising results from a practical point of view (W/mK < 0.07) were obtained with Sida hermaphrodita and Miscanthus , achieving the best results at 50% substitution. The lowest formaldehyde emissions were recorded for boards with Panicum virgatum and Miscanthus , highlighting their positive environmental performance. In terms of mechanical properties, the highest internal bond was noticed in particleboards with a 30% substitution of Spartina pectinata and Miscanthus . Research findings confirm the potential of perennial plants as a sustainable source of raw materials for insulation panel manufacturing. Despite needing improvements in mechanical properties, most notably internal bond strength, these plants offer an ecologically responsible solution aligned with global construction trends, thus lessening reliance on traditional wood products. Thus, long-term benefits may be realized through the strategic combination of diverse raw materials within a single particleboard.

Background: The association of sarcopenia and frailty syndrome with dietary patterns is not yet well recognized., The Aim: The aim of the study was to evaluate the association among dietary patterns, suspected sarcopenia, and frailty syndrome among older people in Poland., Methods: The study was conducted in 2022 and 2023 among people aged 55 and older. The sample was chosen arbitrarily. The following questionnaires were used in the study: the KomPAN (assessment of frequency of food intake and sociodemographic characteristics), the SARC-F (assessment of risk of sarcopenia), and the EFS (diagnosis of frailty syndrome). To confirm the suspicion of sarcopenia, muscle strength was assessed using the HGS and FTSST, and physical fitness was assessed using the GST. Based on the frequency of food consumption, 11 DPs (factors) were selected using PCA analysis. SARC-F, HGS, FTSST, and GST results were used to identify homogeneous groups (clusters) using cluster analysis, a k-means method., Results: Two clusters were identified: cluster 1 (the non-sarcopenic cluster, or nSC) and cluster 2 (the sarcopenic cluster, or SC). Associations between variables were assessed using logistic regression. Suspected sarcopenia was found in 32.0% of respondents, more in men than women, and more among those either over 75 or 65 and under. EFS results showed that the risk (22.1%) or presence of frailty syndrome (23.8%) was more common in men than women and more common in those aged 75 and older than in other age groups. Male gender; older age; and unfavorable dietary patterns, i.e., consumption of white bread and bakery products, white rice and pasta, butter, and potatoes (factor 1) and cheese, cured meat, smoked sausages, and hot dogs (factor 9), increased the likelihood of sarcopenia and frailty syndrome, while the pattern associated with fruit and water consumption (factor 7) had the opposite effect., Conclusions: Confirmation of the importance of dietary patterns in the etiology and pathogenesis of sarcopenia and frailty syndrome should be documented in prospective cohort studies.

Background: Non-alcoholic fatty liver disease (NAFLD) is currently the most common liver disorder affecting about 25% of the global population. The causes of its development include poor diet, low physical activity, overweight, obesity, older age, diabetes, and lipid disorders. Non-alcoholic fatty liver disease is identified by some researchers as a hepatic manifestation of metabolic syndrome. It has been observed that patients with NAFLD have an increased risk of cardiovascular events, as well as a higher number of deaths from myocardial infarction compared to the general population., Material and Methods: A retrospective analysis was conducted on the data of 237 patients diagnosed with hepatic steatosis, treated in the Department of Geriatrics at the University Clinical Hospital in Wrocław from 2019 to 2022, focusing on coexisting overweight, obesity, and concomitant diseases. Laboratory results and the degree of left ventricular muscle hypertrophy were analyzed. Parameters assessed by echocardiography, including interventricular septal thickness in diastole (IVSd), left ventricular posterior wall thickness in diastole (LVPWd), and IVSd + LVPWd/2, were used to evaluate left ventricular hypertrophy., Results: Data from 237 patients were analyzed: 79 men (age: 77.2±7.1 years) and 158 women (age: 78.4±7.7 years). Body mass index (BMI) values for men and women were 30.5±5.0 kg/m² and 31.9±5.6 kg/m², respectively. There was a positive correlation between BMI and the degree of left ventricular hypertrophy for the parameters IVSd (ρ = 0.36, p < 0.001), LVPWd (ρ = 0.36, p < 0.001), and IVSd + LVPWd/2 (ρ = 0.38, p < 0.001)., Conclusions: The study demonstrated a moderate positive correlation between BMI and the degree of left ventricular hypertrophy in patients diagnosed with hepatic steatosis. These findings indicate the necessity of actively searching for cardiovascular risk factors, including the evaluation of echocardiographic parameters in patients with NAFLD. Med Pr Work Health Saf. 2024;75(3):223-231., (This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.)

The thermal treatment of wood can improve the appearance of the wood product's surface, its dimensional stability, and resistance to fungal attacks. However, the heat treatment changes the technological properties of wood, making it a new engineering material. This work investigates the effect of the low-thermal treatment of birch wood ( Betula pendula Roth.), European beech wood ( Fagus sylvatica L.), and alder wood ( Alnus glutinosa L.) on the fine dust particles creation during woodworking. The samples of thermally treated wood with temperatures commonly used for the change of wood colour (105, 125, and 135 °C) were compared with reference samples made of natural wood. All 12 variants of the tested woods were milled using the 5-axis CNC machining center (20 mm diamond cutter, rotational speed 18,000 rev·min -1 , the depth of cut 3 mm, feed rates of 2, 4 and 6 m∙min -1 ). A sieving analysis method allowed measuring the dust particle size distributions in all dust samples. The experiment's result analysis points out that wood type, thermal treatment, and feed rate meaningfully affect the size distribution of dust particles. Compared to birch wood and beech wood, the milling of alder wood samples created a much higher content of the finest dust particles, with particle sizes smaller than 0.032 mm. Increased temperatures in thermal treatment increase the share of fine dust particles with sizes smaller than 0.125 mm, compared to wood in its natural state. Milling with a lower feed rate (2 m·min -1 ) creates finer dust than processing with higher feed rates (4 and 6 m·min -1 ). Generally, the milling of alder in a natural or thermally treated state is a source of fine dust particles, particularly at low feed speed-rate milling, compared to birch and beech wood. In general, these results indicate that the low temperature thermal treatment parameters attribute new technological properties to all thermally modified types of wood tested.

A lot of civilization diseases are related to a low-quality diet, which is often determined by environmental factors. The aim of the present study was to assess the relationship between the quality of diet and the selected metabolic diseases, as well as demographic characteristics and socioeconomic status among Polish seniors. The study was conducted on the basis of the KomPAN questionnaire (Questionnaire for Dietary Views and Habits). The research sample was chosen arbitrarily. In addition, in order to diversify the research sample, the use of the snowball method was used. The study was conducted from June to September 2019 in a group of 437 people aged 60 or more years in two regions of Poland. Two diet quality indices with a potentially beneficial (pHDI-10) and adverse impact on health (pHDI-14) were selected based on data on the frequency of consumption of 24 food groups using the KomPAN questionnaire data development procedure. Based on the intensities (low, moderate, high) and combinations of these indices, three diet quality index profiles were developed with potentially different influences on health: lower (lowest), middle (intermediate) and upper (highest). Logistic regression was used to evaluate the relationship between diet quality indices, some metabolic diseases (obesity, arterial hypertension, diabetes type 2), demographic characteristics (gender, age, place of residence), and socioeconomic status (low, moderate, high). It was shown that in the examined seniors with selected metabolic diseases, the higher quality diet was more common among women, urban inhabitants and subjects with higher socioeconomic status. In turn, among the elderly with obesity, a high-quality diet was observed more often in people aged 60-74 years and those with type II diabetes at ages 75 years or more. The relationships between diet quality, demographic characteristics and socioeconomic status were demonstrated, but it was not possible to obtain unambiguous results on the relationship of these variables with the occurrence of metabolic diseases. Further extended studies should assess the importance of diet quality in reducing the risk of metabolic diseases in the elderly, taking into account the variability resulting from the environmental characteristics of the study population.

In Poland, the elderly population is noticeably increasing every year. Therefore, the current healthcare system has to rise to the challenge of treatment and prevention strategies targeting elderly persons. Based on the Vulnerable Elders Survey (VES-13 scale), consisting of international and validated scales, we put effort into identifying the factors affecting the increased percentage of CGA (Comprehensive Geriatric Assessment) recommendations by healthcare system physicians. The study group involved 78 patients from the Department of Geriatrics, Wroclaw Medical University, Poland, aged 60-91 (median Me = 81 years old). Of the studied patients, 51 were recommended for CGA (51/78; 64.6%). A statistically significant association was observed between CGA recommendation and age ( p < 0.001); the likelihood of a CGA recommendation increased with age. Furthermore, the increased CGA recommendation was observed among geriatric patients with: (a) frailty syndrome (OR = 11.2, CI95% 2.88-43.5, p < 0.001), (b) high risk of malnutrition or malnutrition (OR = 3.87; CI95%, 1.00-14.9, p = 0.04), (c) low mental status (OR = 3.32, CI95% 1.22-9.09, p = 0.029), (d) low ability to perform basic daily duties (according to ADL scale-OR = 12.6, CI95% 1.57-101, p = 0.004 and IADL scale-OR = 4.71, CI95% 1.72-12.9, p = 0.003), and (e) fall risk (OR = 15.0, CI95% 4.67-48.3, p < 0.001). Moreover, homocysteine levels increased with age ( p = 0.003) and decreased with sleep duration ( p = 0.043). Taken together, all these factors seem to be important when implementing treatment programs adjusted to the individual geriatric patient.

Increased demand for wood affects its price and thus contributes to the growing interest in raw materials that can be used as a partial or total substitute for wood in the production of particleboard. One of the raw materials for the production of particleboard can be Cannabis sativa or, more precisely, hemp shives. In this work, 7 variants of panels with a density of 650 kg/m 3 with 10 and 25% hemp shives substitution in different layers were produced. Particleboards containing hemp shives were characterized by lower density compared to conventional particleboards. The shares of hemp shives at the levels of 10% and 25% have a slight impact on the MOR and MOE; additional IB showed no statistically significant differences between the conventional particleboards and particleboards with a share of hemp shives. For particleboards with 25% hemp shives, a reduction in swelling was observed relative to particleboards made entirely of industrial wood particles.

Background: The COVID-GRAM is a clinical risk rating score for predicting the prognosis of hospitalized COVID-19 infected patients., Aim: Our study aimed to evaluate the use of the COVID-GRAM score in patients with COVID-19 based on the data from the COronavirus in the LOwer Silesia (COLOS) registry., Material and Methods: The study group (834 patients of Caucasian patients) was retrospectively divided into three arms according to the risk achieved on the COVID-GRAM score calculated at the time of hospital admission (between February 2020 and July 2021): low, medium, and high risk. The Omnibus chi-square test, Fisher test, and Welch ANOVA were used in the statistical analysis. Post-hoc analysis for continuous variables was performed using Tukey's correction with the Games-Howell test. Additionally, the ROC analysis was performed over time using inverse probability of censorship (IPCW) estimation. The GRAM-COVID score was estimated from the time-dependent area under the curve (AUC)., Results: Most patients (65%) had a low risk of complications on the COVID-GRAM scale. There were 113 patients in the high-risk group (13%). In the medium- and high-risk groups, comorbidities occurred statistically significantly more often, e.g., hypertension, diabetes, atrial fibrillation and flutter, heart failure, valvular disease, chronic kidney disease, and obstructive pulmonary disease (COPD), compared to low-risk tier subjects. These individuals were also patients with a higher incidence of neurological and cardiac complications in the past. Low saturation of oxygen values on admission, changes in C-reactive protein, leukocytosis, hyperglycemia, and procalcitonin level were associated with an increased risk of death during hospitalization. The troponin level was an independent mortality factor. A change from low to medium category reduced the overall survival probability by more than 8 times and from low to high by 25 times. The factor with the strongest impact on survival was the absence of other diseases. The medium-risk patient group was more likely to require dialysis during hospitalization. The need for antibiotics was more significant in the high-risk group on the GRAM score., Conclusion: The COVID-GRAM score corresponds well with total mortality. The factor with the strongest impact on survival was the absence of other diseases. The worst prognosis was for patients who were unconscious during admission. Patients with higher COVID-GRAM score were significantly less likely to return to full health during follow-up. There is a continuing need to develop reliable, easy-to-adopt tools for stratifying the course of SARS-CoV-2 infection.

The depletion of natural resources and increased demand for wood and wood-based materials have directed researchers and the industry towards alternative raw materials for composite manufacturing, such as agricultural waste and wood residues as substitutes of traditional wood. The potential of reusing walnut ( Juglans regia L.) wood residues as an alternative raw material in particleboard manufacturing is investigated in this work. Three-layer particleboard was manufactured in the laboratory with a thickness of 16 mm, target density of 650 kg∙m -3 and three different levels (0%, 25% and 50%) of walnut wood particles, bonded with urea-formaldehyde (UF) resin. The physical properties (thickness swelling after 24 h) and mechanical properties (bending strength, modulus of elasticity and internal bond strength) were evaluated in accordance with the European standards. The effect of UF resin content and nominal applied pressure on the properties of the particleboard was also investigated. Markedly, the laboratory panels, manufactured with 50% walnut wood residues, exhibited flexural properties and internal bond strength, fulfilling the European standard requirements to particleboards used in load-bearing applications. However, none of the boards met the technical standard requirements for thickness swelling (24 h). Conclusively, walnut wood residues as a waste or by-product of the wood-processing industry can be efficiently utilized in the production of particleboard in terms of enhancing its mechanical properties.

The impact of social media on the eagerness to undergo aesthetic breast surgery is unknown. We aimed to evaluate the association between Instagram engagement and the willingness to undergo breast augmentation. Women aged between 19-34 years old participated in an online survey. Of the 1560 respondents, 1226 (78.59%) met the inclusion criteria. BMI, bra type, bra cup size, education, and level of activity on Instagram increased the willingness to undergo breast augmentation (OR = 1.520, p = 0.020). Moreover, concurrent Snapchat use (OR = 1.348, p = 0.024) and the number of published posts on a respondent's Instagram accounts (reference, n > 26; 0 < n ≤ 26; OR = 0.708, p = 0.009; lack of posts ( n = 0): OR = 0.702, p = 0.155) were significant drivers of the respondents' willingness. Fashion (OR = 0.730, p = 0.021), design/architecture (OR = 0.730, p = 0.022), and models (OR = 0.623, p = 0.004) were the searched content categories that increased the desire for breast augmentation. Positive and negative feeling scores that were triggered by Instagram content were correlated with BREAST-Q scores. We concluded that Instagram is a commonly used social network service among young women, and it may drive a desire for breast augmentation. Further analyses of Instagram preferences may help assess the willingness to undergo breast surgery, and in turn assist in tailoring marketing campaigns.

Introduction: The reversibility test measures an increase in ventilation parameters after the administration of 400 mg of a short-acting β-agonist (SABA). It is worth noting that a typical dosage, applied as a rescue medicine for bronchospastic dyspnoea, is significantly less, i.e., 100-200 mg., Aim: To assess the effects of inhaled 400 mg fenoterol (in the bronchodilator reversibility test) on the heart rate and the development of tachyarrhythmias in subjects aged 65 and above., Material and Methods: A total of 53 subjects (45 women) aged 77; 68-82 (median; interquartile range) in stable clinical condition were included in the study. Data including medical history, physical examinations, blood biochemistry, chest X-ray, 12-lead electrocardiogram, 24-hour Holter ECG monitoring, bronchodilator test, and echocardiography were obtained. During the Holter ECG monitoring, the bronchodilator test using 400 mg fenoterol (Berotec pMDI) was performed., Results: A slight but statistically significant ( p = 0.02) increase in heart rate from 71 to 75 per min (median) was noted after the administration of fenoterol. No statistically significant differences were found in the number of extrasystolic beats of either supraventricular ( p = 0.42) or ventricular origin ( p = 0.50). In addition, the subjects did not show any potentially dangerous arrhythmias or significant signs of coronary artery disease. However, there was a significant increase in the number of supraventricular beats in the subjects who were not taking β-blockers., Conclusions: The use of 400 mg fenoterol in a bronchodilator reversibility test in elderly subjects does not entail any significant cardiovascular risk., Competing Interests: Anna Dor-Wojnarowska received financial support for attending the symposium EAACI 2018 from the company Chesi. Other authors declare no conflict of interest., (Copyright © 2021 Termedia.)