Search

The recovery of injured nervous tissue, one of the main goals for regenerative therapeutic approaches, is often hindered by the limited axonal regeneration ability of the central nervous system (CNS). In this regard, the identification of scaffolds that support the reconstruction of functional neuronal tissues and guide the alignment of regenerating neurons is a major challenge in tissue engineering. Ideally, the usage of such scaffolds would promote and guide the axonal growth, a crucial phase for the restoration of neuronal connections and, consequently, the nerve function. Among the materials proposed as scaffolds for CNS regeneration, silk has been used to exploit its outstanding features as a biomaterial to promote axonal regeneration. In this study, we explore, for the first time, the possibility of using high-performance regenerated silk fibers obtained by straining flow spinning (SFS) to serve as scaffolds for inducing and guiding the axonal growth. It is shown that SFS fibers promote the spontaneous organization of dissociated cortical primary cells into highly interconnected cellular spheroid-like tissue formations. Neuronal projections (i.e., axons) from these cellular spheroids span hundreds of microns along the SFS fibers that act as guides and allow the connection of distant spheroids. In addition, it is also shown that SFS fibers serve as scaffolds for neuronal migration covering short and long distances. As a consequence, the usage of high-performance SFS fibers appears as a promising basis for the development of novel therapies, leading to directed axonal regeneration., Comunidad de Madrid (S2017/BMD-3760), Ministerio de Ciencia e Innovación (MAT2016-79832-R), Depto. de Biodiversidad, Ecología y Evolución, Centro de Vigilancia Sanitaria Veterinaria (VISAVET), TRUE, pub

The interaction between the plant lipid transfer protein Pru p 3 and phytosphingosine was assessed using an atomic force microscope. Phytosphingosine was covalently immobilized on DeepTipTM probes and Pru p 3 on MicroDeckTM functionalized substrates. Single-molecular interaction events between both molecules were retrieved and classified and the distribution for each one of the identified types was calculated. A success rate of over 70% was found by comparing the number of specific Pru p 3-phytosphingosine interaction events with the total number of recorded curves. The analysis of the distribution established among the various types of curves was further pursued to distinguish between those curves that can mainly be used for assessing the recognition between phytosphingosine (sensor molecule) and Pru p 3 (target molecule) in the context of affinity atomic force microscopy, and those that entail details of the interaction and might be employed in the context of force spectroscopy. The successful application of these functionalized probes and substrates to the characterization of the low-intensity hydrophobic interaction characteristic of this system is a clear indication of the potential of exploiting this approach with an extremely wide range of different biological molecules of interest. The possibility of characterizing molecular assembly events with single-molecule resolution offers an advantageous procedure to plough into the field of molecular biomimetics.

Spider dragline fibers exhibit incredible mechanical properties, outperforming many synthetic polymers in toughness assays, and possess desirable properties for medical and other human applications. These qualities make dragline fibers popular subjects for biomimetics research. The enormous diversity of spiders presents both an opportunity for the development of new bioinspired materials and a challenge for the identification of fundamental design principles, as the mechanical properties of dragline fibers show both intraspecific and interspecific variations. In this regard, the stress-strain curves of draglines from different species have been shown to be effectively compared by the alpha* parameter, a value derived from maximum-supercontracted silk fibers. To identify potential molecular mechanisms impacting alpha* values, here we analyze spider fibroin (spidroin) sequences of the Western black widow (Latrodectus hesperus) and the black and yellow garden spider (Argiope aurantia). This study serves as a primer for investigating the molecular properties of spidroins that underlie species-specific alpha* values. Initial findings are that while overall motif composition was similar between species, certain motifs and higher level periodicities of glycine-rich region lengths showed variation, notably greater distances between poly-A motifs in A. aurantia sequences. In addition to increased period lengths, A. aurantia spidroins tended to have an increased prevalence of charged and hydrophobic residues. These increases may impact the number and strength of hydrogen bond networks within fibers, which have been implicated in conformational changes and formation of nanocrystals, contributing to the greater extensibility of A. aurantia draglines compared to those of L. hesperus.

The trends exhibited by the parameters that describe the mechanical behaviour of major ampullate gland silk fibers spun by Argiope bruennichi spiders is explored by performing a series of loading-unloading tests at increasing values of strain, and by the subsequent analysis of the true stress-true strain curves obtained from these cycles. The elastic modulus, yields stress, energy absorbed, and energy dissipated in each cycle are computed in order to evaluate the evolution of these mechanical parameters with this cyclic straining. The elastic modulus is observed to increase steadily under these loading conditions, while only a moderate variation is found in the yield stress. It is also observed that a significant proportion of the energy initially absorbed in each cycle is not only dissipated, but that the material may recover partially from the associated irreversible deformation. This variation in the mechanical performance of spider silk is accounted for through a combination of irreversible and reversible deformation micromechanisms in which the viscoelasticity of the material plays a leading role.

Titanium (Ti-6Al-4V) substrates were functionalized through the covalent binding of fibronectin, and the effect of the existence of this extracellular matrix protein on the surface of the material was assessed by employing mesenchymal stem cell (MSC) cultures. The functionalization process comprised the usage of the activation vapor silanization (AVS) technique to deposit a thin film with a high surface density of amine groups on the material, followed by the covalent binding of fibronectin to the amine groups using the N-(3-dimethylaminopropyl)-N & PRIME;-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) crosslinking chemistry. The biological effect of the fibronectin on murine MSCs was assessed in vitro. It was found that functionalized samples not only showed enhanced initial cell adhesion compared with bare titanium, but also a three-fold increase in the cell area, reaching values comparable to those found on the polystyrene controls. These results provide compelling evidence of the potential to modulate the response of the organism to an implant through the covalent binding of extracellular matrix proteins on the prosthesis.

Single molecule interactions between biotin and streptavidin were characterized with functionalized DeepTip (TM) probes and used as a model system to develop a comprehensive methodology for the high-yield identification and analysis of single molecular events. The procedure comprises the covalent binding of the target molecule to a surface and of the sensing molecule to the DeepTip (TM) probe, so that the interaction between both chemical species can be characterized by obtaining force-displacement curves in an atomic force microscope. It is shown that molecular resolution is consistently attained with a percentage of successful events higher than 90% of the total number of recorded curves, and a very low level of unspecific interactions. The combination of both features is a clear indication of the robustness and versatility of the proposed methodology.

The interaction between the plant lipid transfer protein Pru p 3 and phytosphingosine was assessed using an atomic force microscope. Phytosphingosine was covalently immobilized on DeepTip (TM) probes and Pru p 3 on MicroDeck (TM) functionalized substrates. Single-molecular interaction events between both molecules were retrieved and classified and the distribution for each one of the identified types was calculated. A success rate of over 70% was found by comparing the number of specific Pru p 3-phytosphingosine interaction events with the total number of recorded curves. The analysis of the distribution established among the various types of curves was further pursued to distinguish between those curves that can mainly be used for assessing the recognition between phytosphingosine (sensor molecule) and Pru p 3 (target molecule) in the context of affinity atomic force microscopy, and those that entail details of the interaction and might be employed in the context of force spectroscopy. The successful application of these functionalized probes and substrates to the characterization of the low-intensity hydrophobic interaction characteristic of this system is a clear indication of the potential of exploiting this approach with an extremely wide range of different biological molecules of interest. The possibility of characterizing molecular assembly events with single-molecule resolution offers an advantageous procedure to plough into the field of molecular biomimetics.

The adhesion forces of cells to peptide-coated functionalized materials were assessed through the Single Cell Force Spectroscopy (SCFS) technique in order to develop a methodology that allows the fast selection of peptide motifs that favor the interaction between cells and the biomaterial. Borosilicate glasses were functionalized using the activated vapor silanization process (AVS) and subsequently decorated with an RGD- containing peptide using the EDC/NHS crosslinking chemistry.It is shown that the RGD-coated glass induces larger attachment forces on mesenchymal stem cell cultures (MSCs), compared to the bare glass substrates. These higher forces correlate well with the enhanced adhesion of the MSCs observed on RGD-coated substrates through conventional adhesion cell cultures and inverse centrifugation tests. The methodology based on the SCFS technique presented in this work constitutes a fast procedure for the screening of new peptides or their combinations to select candidates that may enhance the response of the organism to the implant of the functionalized biomaterials.

After an injury, the limited regenerative capacity of the central nervous system makes the reconnection and functional recovery of the affected nervous tissue almost impossible. To address this problem, biomaterials appear as a promising option for the design of scaffolds that promote and guide this regenerative process. Based on previous seminal works on the ability of regenerated silk fibroin fibers spun through the straining flow spinning (SFS) technique, this study is intended to show that the usage of functionalized SFS fibers allows an enhancement of the guidance ability of the material when compared with the control (nonfunctionalized) fibers. It is shown that the axons of the neurons not only tend to follow the path marked by the fibers, in contrast to the isotropic growth observed on conventional culture plates, but also that this guidance can be further modulated through the biofunctionalization of the material with adhesion peptides. Establishing the guidance ability of these fibers opens the possibility of their use as implants for spinal cord injuries, so that they may represent the core of a therapy that would allow the reconnection of the injured ends of the spinal cord.

Central nervous system (CNS) diseases represent an extreme burden with significant social and economic costs. A common link in most brain pathologies is the appearance of inflammatory components that can jeopardize the stability of the implanted biomaterials and the effectiveness of therapies. Different silk fibroin scaffolds have been used in applications related to CNS disorders. Although some studies have analyzed the degradability of silk fibroin in non-cerebral tissues (almost exclusively upon non-inflammatory conditions), the stability of silk hydrogel scaffolds in the inflammatory nervous system has not been studied in depth. In this study, the stability of silk fibroin hydrogels exposed to different neuroinflammatory contexts has been explored using an in vitro microglial cell culture and two in vivo pathological models of cerebral stroke and Alzheimer's disease. This biomaterial was relatively stable and did not show signs of extensive degradation across time after implantation and during two weeks of in vivo analysis. This finding contrasted with the rapid degradation observed under the same in vivo conditions for other natural materials such as collagen. Our results support the suitability of silk fibroin hydrogels for intracerebral applications and highlight the potentiality of this vehicle for the release of molecules and cells for acute and chronic treatments in cerebral pathologies.

Among the different polymers (proteins, polysaccharides, etc.) that make up natural fibers, fibroin is a protein produced by silk spinning animals, which have developed an optimized system for the conversion of a highly concentrated solution of this protein into high-performance solid fibers. This protein undergoes a self-assembly process in the silk glands that result from chemical gradients and by the application of mechanical stresses during the last step of the process. In the quest for a process that could mimic natural spinning at massive scales, we have discovered that turbulence offers a novel and promising solution: a turbulent liquid jet can be formed by a chemically green and simple coagulating liquid (a diluted solution of acetic acid in etanol) co-flowing with a concentrated solution of fibroin in water by the use of a Flow Blurring nebulizer. In this system, (a) the co-flowing coagulant liquid extracts water from the original protein solution and, simultaneously, (b) the self-assembled proteins are subjected to mechanical actions, including splitting and stretching. Given the non-negligible produced content with the size and appearance of natural silk, the stochastic distribution of those effects in our process should contain the range of natural ones found in animals. The resulting easily functionalizable and tunable one-step material is 100% biocompatible, and our method a perfect candidate to large-scale, low-cost, green and sustainable processing of fibroin for fibres and textiles.

High-performance regenerated silkworm (Bombyx mori) silk fibers can be produced efficiently through the straining flow spinning (SFS) technique. In addition to an enhanced biocompat-ibility that results from the removal of contaminants during the processing of the material, regenerated silk fibers may be functionalized conveniently by using a range of different strategies. In this work, the possibility of implementing various functionalization techniques is explored, including the production of fluorescent fibers that may be tracked when implanted, the combination of the fibers with enzymes to yield fibers with catalytic properties, and the functionalization of the fibers with cell-adhesion motifs to modulate the adherence of different cell lineages to the material. When considered globally, all these techniques are a strong indication not only of the high versatility of-fered by the functionalization of regenerated fibers in terms of the different chemistries that can be employed, but also on the wide range of applications that can be covered with these functionalized fibers.

Among the different polymers (proteins, polysaccharides, etc.) that make up natural fibers, fibroin is a protein produced by silk spinning animals, which have developed an optimized system for the conversion of a highly concentrated solution of this protein into high-performance solid fibers. This protein undergoes a self-assembly process in the silk glands that result from chemical gradients and by the application of mechanical stresses during the last step of the process. In the quest for a process that could mimic natural spinning at massive scales, we have discovered that turbulence offers a novel and promising solution: a turbulent liquid jet can be formed by a chemically green and simple coagulating liquid (a diluted solution of acetic acid in etanol) co-flowing with a concentrated solution of fibroin in water by the use of a Flow Blurring nebulizer. In this system, (a) the co-flowing coagulant liquid extracts water from the original protein solution and, simultaneously, (b) the self-assembled proteins are subjected to mechanical actions, including splitting and stretching. Given the non-negligible produced content with the size and appearance of natural silk, the stochastic distribution of those effects in our process should contain the range of natural ones found in animals. The resulting easily functionalizable and tunable one-step material is 100% biocompatible, and our method a perfect candidate to large-scale, low-cost, green and sustainable processing of fibroin for fibres and textiles.

High-performance regenerated silkworm (Bombyx mori) silk fibers can be produced efficiently through the straining flow spinning (SFS) technique. In addition to an enhanced biocompatibility that results from the removal of contaminants during the processing of the material, regenerated silk fibers may be functionalized conveniently by using a range of different strategies. In this work, the possibility of implementing various functionalization techniques is explored, including the production of fluorescent fibers that may be tracked when implanted, the combination of the fibers with enzymes to yield fibers with catalytic properties, and the functionalization of the fibers with cell-adhesion motifs to modulate the adherence of different cell lineages to the material. When considered globally, all these techniques are a strong indication not only of the high versatility offered by the functionalization of regenerated fibers in terms of the different chemistries that can be employed, but also on the wide range of applications that can be covered with these functionalized fibers.

Titanium implants are widely used in traumatology and various orthopedic fields. Titanium and other metallic-based implants have limited structural and functional integration into the body, which translates into progressive prosthesis instability and the need for new surgical interventions that have enormous social and economic impacts. To enhance the biocompatibility of titanium implants, numerous biofunctionalization strategies have been developed. However, the problem persists, as more than 70% of implant failures are due to aseptic loosening. In this study we addressed the problem of improving the physiological engraftability and acceptability of titanium-based implants by applying a robust and versatile functionalization method based on the covalent immobilization of extracellular matrix (ECM)derived oligopeptides on Ti-6Al-4V surfaces treated by activated vapor silanization (AVS). The feasibility of this technique was evaluated with two oligopeptides of different structures and compositions. These oligopeptides were immobilized on Ti-6Al-4V substrates by a combination of AVS and N-(3-dimethylaminopropyl)-N???-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) crosslinking chemistry. The immobilization was shown to be stable and resistant to chemical denaturing upon sodium dodecyl sulfate treatment. On Ti-6Al-4V surfaces both peptides increased the attachment, spreading, rearrangement and directional growth of mesenchymal stem and progenitor cells (MSC) with chondro- and osteo-regenerative capacities. We also found that this biofunctionalization method (AVS-EDC/NHS) increased the attachment capacity of an immortalized cell line of neural origin with poor adhesive properties, highlighting the versatility and robustness of this method in terms of potential oligopeptides that may be used, and cell lineages whose anchorage to the biomaterial may be enhanced. Collectively, this novel functionalization strategy can accelerate the development of advanced p

Silk gut fibers were produced from the silkworm Samia cynthia ricini silk glands by the usual procedure of immersion in a mildly acidic solution and subsequent stretching. The morphology of the silk guts was assessed by scanning electron microscopy, and their microstructure was assessed by infrared spectroscopy and X-ray diffraction. It was found that both naturally spun and Samia silk guts share a common semicrystalline microstructure. The mechanical characterization of the silk guts revealed that these fibers show an elastomeric behavior when tested in water, and exhibit a genuine ground state to which the fiber may revert independently of its previous loading history. In spite of its large cross-sectional area compared with naturally spun silk fibers, Samia silk guts show values of work to fracture up to 160 MJ m(-3), much larger than those of most of their natural counterparts, and establish a new record value for this parameter in silk guts.

Two different polyglycine-rich fragments were selected as representatives of major ampullate gland spidroins (MaSp) 1 and 2 types, and their behavior in a water-saturated environment was simulated within the framework of molecular dynamics (MD). The selected fragments are found in the sequences of the proteins MaSp1a and MaSp2.2a of Argiope aurantia with respective lengths of 36 amino acids (MaSp1a) and 50 amino acids (MaSp2.2s). The simulation took the fully extended beta-pleated conformation as reference, and MD was used to determine the equilibrium configuration in the absence of external forces. Subsequently, MD were employed to calculate the variation in the distance between the ends of the fragments when subjected to an increasing force. Both fragments show an elastomeric behavior that can be modeled as a freely jointed chain with links of comparable length, and a larger number of links in the spidroin 2 fragment. It is found, however, that the maximum recovery force recorded from the spidroin 2 peptide (F-max approximate to 400 pN) is found to be significantly larger than that of the spidroin 1 (F-max approximate to 250 pN). The increase in the recovery force of the spidroin 2 polyglycine-rich fragment may be correlated with the larger values observed in the strain at breaking of major ampullate silk fibers spun by Araneoidea species, which contain spidroin 2 proteins, compared to the material produced by spider species that lack these spidroins (RTA-clade).

The expression of spidroins in the major ampullate, minor ampullate, flagelliform, and tubuliform silk glands of Trichonephila clavipes spiders was analyzed using proteomics analysis techniques. Spidroin peptides were identified and assigned to different gene products based on sequence concurrence when compared with the whole genome of the spider. It was found that only a relatively low proportion of the spidroin genes are expressed as proteins in any of the studied glands. In addition, the expression of spidroin genes in different glands presents a wide range of patterns, with some spidroins being found in a single gland exclusively, while others appear in the content of several glands. The combination of precise genomics, proteomics, microstructural, and mechanical data provides new insights both on the design principles of these materials and how these principles might be translated for the production of high-performance bioinspired artificial fibers.

Silk gut fibers were produced from the silkworm Samia cynthia ricini silk glands by the usual procedure of immersion in a mildly acidic solution and subsequent stretching. The morphology of the silk guts was assessed by scanning electron microscopy, and their microstructure was assessed by infrared spectroscopy and X-ray diffraction. It was found that both naturally spun and Samia silk guts share a common semicrystalline microstructure. The mechanical characterization of the silk guts revealed that these fibers show an elastomeric behavior when tested in water, and exhibit a genuine ground state to which the fiber may revert independently of its previous loading history. In spite of its large cross-sectional area compared with naturally spun silk fibers, Samia silk guts show values of work to fracture up to 160 MJ m, much larger than those of most of their natural counterparts, and establish a new record value for this parameter in silk guts.