Search

The increasing industrial utilization of tellurium has resulted in an important environmental pollution with the soluble, extremely toxic oxyanion tellurite. In this context, the use of microorganisms for detoxifying tellurite or tellurium biorecovery has gained great interest. The ability of different Shewanella strains to reduce tellurite to elemental tellurium was assessed; the results showed that the reduction process is dependent on electron transport and the ∆pH gradient. While S. baltica OS155 showed the highest tellurite resistance, S. putrefaciens was the most efficient in reducing tellurite. Moreover, pH-dependent tellurite transformation was associated with tellurium precipitation as tellurium dioxide. In summary, this work highlights the high tellurite reduction/detoxification ability exhibited by a number of Shewanella species, which could represent the starting point to develop friendly methods for the recovery of elemental tellurium (or tellurium dioxide). [ABSTRACT FROM AUTHOR]

Background and Objective Porphyromonas gingivalis infection induces apoptosis inhibition in gingival epithelial cells; however, it is not fully understood which bacterial effectors are involved in this process. The aim of this study is to evaluate whether the P. gingivalis lipopolysaccharide ( LPS), specifically the O-antigen region, affects adherence, invasion, viability and apoptosis of gingival epithelial cells. Material and Methods Gingival epithelial cells ( OKF6/ TERT2 line) were infected by different freshly prepared P. gingivalis clinical isolates, obtained from subjects with chronic periodontitis ( CP3 and CP4) and healthy individuals (H1 and H3). Periodontitis and healthy isolates show differences in O-antigen production, as healthy isolates lack the O-antigen region. In addition, cells were infected by a site-specific mutant lacking the O-antigen portion. After 24 h postinfection, cell proliferation, viability and apoptosis were evaluated by Trypan blue, MTS and annexin V assays, respectively. Bacterial invasion, adhesion and proliferation were measured by gentamicin/metronidazole protection assays. Finally, toll-like receptor ( TLR)2 and TLR4 mRNA expression was evaluated by quantitative reverse transcription-polymerase chain reaction. Statistical analysis was performed using ANOVA, Tukey's or Dunnett's tests ( p < 0.05). Results At 24 h postinfection, strains lacking the O-antigen region (healthy isolates and O-antigen ligase-deficient strain) were unable to increase proliferation and viability, or decrease apoptosis as compared with strains producing intact LPS (periodontitis isolates and reference strain). However, the presence of the O-antigen neither contributed to changes in the ability of the bacteria to adhere to or invade cells, nor to intracellular survival. The presence of O-antigen also increased the expression of TLR4 (nearly sixfold), which correlated with inhibition of apoptosis. Conclusion The O-antigen region of P. gingivalis LPS is required to increase gingival epithelial cell viability upon infection by bacteria and this increase is attributable to a reduction in apoptosis. Moreover, although bacterial internalization is required, the effects observed are not due to alterations in P. gingivalis adherence, invasion or intracellular survival. Interestingly, inhibition of apoptosis correlates with increased TLR4 expression, suggesting a role for TLR4 in this process. [ABSTRACT FROM AUTHOR]

Víctor Manuel Díaz-García,1–4 Simón Guerrero,1,2,5 Natalia Díaz-Valdivia,1,2 Lorena Lobos-González,2,6,7 Marcelo Kogan,2,5 José Manuel Pérez-Donoso,3 Andrew FG Quest1,21Cellular Communication Laboratory, Center for Studies on Exercise, Metabolism and Cancer (CEMC), Faculty of Medicine, Universidad de Chile, Santiago, Chile; 2Advanced Center for Chronic Diseases (ACCDiS), Faculty of Medicine, Universidad de Chile, Santiago, Chile; 3BioNanotechnology and Microbiology Laboratory, Center for Bioinformatics and Integrative Biology (CBIB), Faculty of life Sciences, Universidad Andres Bello, Santiago, Chile; 4Facultad de Ingeniería y Tecnología, Universidad San Sebastián, Concepción 4080871, Chile; 5Department of Pharmacological and Toxicological Chemistry, Faculty of Chemical and Pharmaceutical Sciences, Universidad de Chile, Santiago, Chile; 6Fundación Ciencia y Vida, Santiago, Chile; 7Centro de Medicina Regenerativa, Facultad de Medicina, Clínica Alemana, Universidad del Desarrollo , Santiago, ChileBackground: Numerous studies have proposed the use of fluorescent semiconductor nanoparticles or quantum dots (QDs) as novel tools to label cells and tumors. However, QD applications are limited by their toxicity in biological systems and little is known about whether QDs affect the capacity of cancer cells to metastasize. Previously, we described the “biomimetic” synthesis of CdTe-QDs (QDs-glutathione [GSH]) with increased biocompatibility and the potential utility in labeling cells.Purpose: In order to determine the feasibility of using QDs-GSH as a tool for tracking tumor cells during early metastasis, we characterized here for the first time, the in vitro and in vivo effects of the incorporation of green or red biomimetic QDs-GSH into B16F10 cells, a syngeneic mouse melanoma line for metastasis assays in C57BL/6 mice.Methods: B16F10 cells were labeled with green or red biomimetic QDs-GSH in the presence or absence of n-acetylcysteine. Then, migration, invasion and proliferation of labeled B16F10 were evaluated in vitro. Finally, the B16F10 cells labeled with red QDs-GSH were used to monitor in vivo lung metastasis at early time points (5 minutes to 24 hours) or after 21 days in C57BL/6 mice.Results: We developed a methodology that allows obtaining QDs-GSH-labeled B16F10 cells (nearly 100% viable labeled cells), which remained viable for at least 5 days and migrated similarly to control cells. However, proliferation, invasion, and the capacity to form metastatic nodules in the lungs were severely attenuated. Fluorescence imaging revealed that distribution/accumulation of QDs-GSH-labeled B16F10 cells could be tracked following injection into C57BL/6 mice (syngeneic preclinical metastasis model) and that these cells preferentially accumulated in the perialveolar area in lungs as early as 5 minutes post-injection.Conclusion: The methodology described here represents a useful alternative for monitoring initial events during tumor cell metastasis.Keywords: cell tracking, biomimetic, invasion, proliferation, migration, cancer

Background: Rare-earth sulfide nanoparticles (NPs) could harness the optical and magnetic features of rare-earth ions for applications in nanotechnology. However, reports of their synthesis are scarce and typically require high temperatures and long synthesis times., Results: Here we present a biosynthesis of terbium sulfide (TbS) NPs using microorganisms, identifying conditions that allow Escherichia coli to extracellularly produce TbS NPs in aqueous media at 37 °C by controlling cellular sulfur metabolism to produce a high concentration of sulfide ions. Electron microscopy revealed ultrasmall spherical NPs with a mean diameter of 4.1 ± 1.3 nm. Electron diffraction indicated a high degree of crystallinity, while elemental mapping confirmed colocalization of terbium and sulfur. The NPs exhibit characteristic absorbance and luminescence of terbium, with downshifting quantum yield (QY) reaching 28.3% and an emission lifetime of ~ 2 ms., Conclusions: This high QY and long emission lifetime is unusual in a neat rare-earth compound; it is typically associated with rare-earth ions doped into another crystalline lattice to avoid non-radiative cross relaxation. This suggests a reduced role of nonradiative processes in these terbium-based NPs. This is, to our knowledge, the first report revealing the advantage of biosynthesis over chemical synthesis for Rare Earth Element (REE) based NPs, opening routes to new REE-based nanocrystals., (© 2024. The Author(s).)

Aim: Fluorescent semiconductor nanoparticles or quantum dots (QDs) have excellent properties as photosensitizers in photodynamic therapy. This is mainly a consequence of their nanometric size and the generation of light-activated redox species. In previous works, we have reported the low-cost biomimetic synthesis of glutathione (GSH) capped QDs (CdTe-GSH QDs) with high biocompatibility. However, no studies have been performed to determine their phototoxic effect. The aim of this work was to characterize the light-induced toxicity of green (QDs 500 ) and red (QDs 600 ) QDs in Escherichia coli, and to study the molecular mechanism involved., Methods and Results: Photodegradation and reduction power of biomimetic QDs was determined to analyse their potential for radical generation. Escherichia coli cells were exposed to photoactivated QDs and viability was evaluated at different times. High toxicity was determined in E. coli cells exposed to photoactivated QDs, particularly QDs 500 . The molecular mechanism involved in QDs phototoxicity was studied by determining Cd 2+ -release and intracellular reactive oxygen species (ROS). Cells exposed to photoactivated QDs 500 presented high levels of ROS. Cells exposed to photoactivated QDs 500 presented high levels of ROS. Finally, to understand this phenomenon and the importance of oxidative and cadmium-stress in QDs-mediated phototoxicity, experiments were performed in E. coli mutants in ROS and Cd 2+ response genes. As expected, E. coli mutants in ROS response genes were more sensitive than the wt strain to photoactivated QDs, with a higher effect in green-QDs 500 . No increase in phototoxicity was observed in cadmium-related mutants., Conclusion: Obtained results indicate that light exposure increases the toxicity of biomimetic QDs on E. coli cells. The mechanism of bacterial phototoxicity of biomimetic CdTe-GSH QDs is mostly associated with ROS generation., Significance and Impact of the Study: The results presented establish biomimetic CdTe-GSH QDs as a promising cost-effective alternative against microbial infections, particularly QDs 500 ., (© 2020 The Society for Applied Microbiology.)

Here, we report the draft sequence of Blautia luti strain DSM 14534 T , originally isolated from human feces. This draft contains 74 contigs, comprising 3,718,760 bp with a G+C content of 42.87%. The annotated draft contains 3,338 coding sequences (CDSs) and 110 RNA genes., (Copyright © 2020 Ortiz et al.)

The composition of the vaginal microbiome, including both the presence of pathogens involved in sexually transmitted infections (STI) as well as commensal microbiota, has been shown to have important associations for a woman's reproductive and general health. Currently, healthcare providers cannot offer comprehensive vaginal microbiome screening, but are limited to the detection of individual pathogens, such as high-risk human papillomavirus (hrHPV), the predominant cause of cervical cancer. There is no single test on the market that combines HPV, STI, and microbiome screening. Here, we describe a novel inclusive vaginal health assay that combines self-sampling with sequencing-based HPV detection and genotyping, vaginal microbiome analysis, and STI-associated pathogen detection. The assay includes genotyping and detection of 14 hrHPV types, 5 low-risk HPV types (lrHPV), as well as the relative abundance of 31 bacterial taxa of clinical importance, including Lactobacillus, Sneathia, Gardnerella, and 3 pathogens involved in STI, with high sensitivity, specificity, and reproducibility. For each of these taxa, reference ranges were determined in a group of 50 self-reported healthy women. The HPV sequencing portion of the test was evaluated against the digene High-Risk HPV HC2 DNA test. For hrHPV genotyping, agreement was 95.3% with a kappa of 0.804 (601 samples); after removal of samples in which the digene hrHPV probe showed cross-reactivity with lrHPV types, the sensitivity and specificity of the hrHPV genotyping assay were 94.5% and 96.6%, respectively, with a kappa of 0.841. For lrHPV genotyping, agreement was 93.9% with a kappa of 0.788 (148 samples), while sensitivity and specificity were 100% and 92.9%, respectively. This novel assay could be used to complement conventional cervical cancer screening, because its self-sampling format can expand access among women who would otherwise not participate, and because of its additional information about the composition of the vaginal microbiome and the presence of pathogens., Competing Interests: All of the authors of the paper are current or past employees of uBiome, Inc. and have received stock options as well as other compensation. Some authors have patents pending in relation to this work: US Application No 15/198,818, Method and system for diagnostic testing, Application No 16/084,945, Method and system for microbiome-derived diagnostics and therapeutics for bacterial vaginosis, and Application No 16/115,542, Method and system for characterization for female reproductive system-related conditions associated with microorganisms. The data in this article were used in the development of a commercially available test product developed and marketed by uBiome. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

The use of bacterial cells to produce fluorescent semiconductor nanoparticles (quantum dots, QDs) represents a green alternative with promising economic potential. In the present work, we report for the first time the biosynthesis of CdS QDs by acidophilic bacteria of the Acidithiobacillus genus. CdS QDs were obtained by exposing A. ferrooxidans, A. thiooxidans and A. caldus cells to sublethal Cd 2+ concentrations in the presence of cysteine and glutathione. The fluorescence of cadmium-exposed cells moves from green to red with incubation time, a characteristic property of QDs associated with nanocrystals growth. Biosynthesized nanoparticles (NPs) display an absorption peak at 360nm and a broad emission spectra between 450 and 650nm when excited at 370nm, both characteristic of CdS QDs. Average sizes of 6 and 10nm were determined for green and red NPs, respectively. The importance of cysteine and glutathione on QDs biosynthesis in Acidithiobacillus was related with the generation of H 2 S. Interestingly, QDs produced by acidophilic bacteria display high tolerance to acidic pH. Absorbance and fluorescence properties of QDs was not affected at pH 2.0, a condition that totally inhibits the fluorescence of QDs produced chemically or biosynthesized by mesophilic bacteria (stable until pH 4.5-5.0). Results presented here constitute the first report of the generation of QDs with improved properties by using extremophile microorganisms., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Here we report the use of pigments produced by UV-resistant Antarctic bacteria as photosensitizers in Dye Sensitized Solar Cells (DSSCs). Pigments were obtained from red and yellow colored psychrotolerant bacteria isolated from soils of King George Island, Antarctica. Based on metabolic characteristics and 16s DNA sequence, pigmented bacteria were identified as Hymenobacter sp. (red) and Chryseobacterium sp. (yellow). Pigments produced by these microorganisms were extracted and classified as carotenoids based on their spectroscopic and structural characteristics, determined by UV-Vis spectrophotometry and infrared spectroscopy (FTIR), respectively. With the purpose of develop green solar cells based on bacterial pigments, the photostability and capacity of these molecules as light harvesters in DSSCs were determined. Absorbance decay assays determined that bacterial carotenoids present high photostability. In addition, solar cells based on these photosensitizers exhibit an open circuit voltage (VOC) of 435.0 [mV] and a short circuit current density (ISC) of 0.2 [mA·cm(-2)] for the red pigment, and a VOC of 548.8 [mV] and a ISC of 0.13 [mA·cm(-2)] for the yellow pigment. This work constitutes the first approximation of the use of pigments produced by non-photosynthetic bacteria as photosensitizers in DSSCs. Determined photochemical characteristics of bacterial pigments, summed to their easy obtention and low costs, validates its application as photosensitizers in next-generation biological solar cells., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Bacterial biosynthesis of nanoparticles represents a green alternative for the production of nanostructures with novel properties. Recently, the importance of antioxidant molecules on the biosynthesis of semiconductor fluorescent nanoparticles (quantum dots, QDs) by mesophilic bacteria was reported. The objective of this work was the isolation of psychrotolerant, oxidative stress-resistant bacteria from Antarctica to determine their ability for biosynthesizing CdS QDs at low temperatures. QDs biosynthesis at 15 °C was evaluated by determining their spectroscopic properties after exposing oxidative-stress resistant isolates identified as Pseudomonas spp. to Cd(2+) salts. To characterize the QDs biosynthetic process, the effect of metal exposure on bacterial fluorescence was determined at different times. Time-dependent changes in fluorescence color (green to red), characteristic of QDs, were observed. Electron microscopy analysis of fluorescent cells revealed that biosynthesized nanometric structures localize at the cell periphery. QDs were purified from the bacterial isolates and their fluorescence properties were characterized. Emission spectra displayed classical CdS peaks when excited with UV light. Thiol content, peroxidase activity, lipopolysaccharide synthesis, metabolic profiles and sulfide generation were determined in QDs-producing isolates. No relationship between QDs production and cellular thiol content or peroxidase activity was found. However, sulfide production enhanced CdS QDs biosynthesis. In this work, the use of Antarctic psychrotolerant Pseudomonas spp. for QDs biosynthesis at low temperature is reported for the first time., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A simple and sensitive method for quantification of nanomolar copper with a detection limit of 1.2×10(-10)M and a linear range from 10(-9) to 10(-8)M is reported. For the most useful analytical concentration of quantum dots, 1160μg/ml, a 1/Ksv value of 11μM Cu(2+) was determined. The method is based on the interaction of Cu(2+) with glutathione-capped CdTe quantum dots (CdTe-GSH QDs) synthesized by a simple and economic biomimetic method. Green CdTe-GSH QDs displayed the best performance in copper quantification when QDs of different sizes/colors were tested. Cu(2+) quantification is highly selective given that no significant interference of QDs with 19 ions was observed. No significant effects on Cu(2+) quantification were determined when different reaction matrices such as distilled water, tap water, and different bacterial growth media were tested. The method was used to determine copper uptake kinetics on Escherichia coli cultures. QD-based quantification of copper on bacterial supernatants was compared with atomic absorption spectroscopy as a means of confirming the accuracy of the reported method. The mechanism of Cu(2+)-mediated QD fluorescence quenching was associated with nanoparticle decomposition., (Copyright © 2014 Elsevier Inc. All rights reserved.)