Search

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

OBJECTIVE: To determine Oral Health Related Quality of Life (OHRQoL) in patients receiving fixed orthodontic treatment METHODS: This study was conducted at department of Orthodontics, Khyber College of Dentistry, Peshawar from 24th March 2022 to 30th June 2022. One hundred and seventy-five patients, undergoing fixed orthodontic therapy for at least three months were included in the study. Patients with oral diseases that directly or indirectly affect OHRQoL, any previous orthodontic treatment, cognitive impairment and craniofacial anomalies were excluded. The OHRQoL was recorded using Oral Health Impact Profile-14 (OHIP-14) questionnaire. Independent samples t-test was used to examine the relationship between age and gender with total OHIP-14 score. Comparison of OHIP-14 score among socioeconomic levels and educational level was done using one way ANOVA. RESULTS: The mean age of the participants was 23.13±5.25 years, OHIP-14 score was 29.48±7.36 and 56% (n=98) were females. No significant difference was found between gender, age of the participants, socioeconomic status (SES) and the OHIP-14 score (p=0.05). Highest mean OHIP-14 score was found in ‘higher educational level’ followed by intermediate then secondary school and least in primary education level and it was very highly statistically significant (ANOVA test, p

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: To evaluate the effectiveness of various orthodontic retention protocols, including removable retainers, fixed retainers, and a combination of both. Material and Methods: A cohort of orthodontic patients (n=240) was divided into four groups: Removable Retainer Group, Fixed Retainer Group, Combination Protocol Group, and Control Group. Tooth alignment stability, patient satisfaction, compliance, and adverse event occurrence were assessed over two years. Data analysis included regression analysis and comparisons between groups. Results: Fixed retainers demonstrated superior effectiveness in maintaining tooth alignment stability compared to removable retainers and the combination protocol, with the slightest deviation from baseline alignment. The Fixed Retainer Group also reported the highest patient satisfaction and compliance rates. Adverse events and complications, such as retainer breakage and discomfort, were more frequent in the Removable Retainer Group. Conclusion: Fixed retainers offer superior tooth alignment stability, patient satisfaction, and compliance, while adverse events are relatively infrequent and manageable. However, patient preferences and needs should be considered when choosing the most appropriate retention strategy.

ABSTRACT Objective: This cross-sectional study evaluated the bone thickness on mini-implants insertion site, the factors that influence the digital planning of MARPE appliance (miniscrew-assisted rapid palatal expansion), and its different designs. Methods: A total of 135 plannings were assessed regarding the size of the expander screw used, the positioning and the type of the mini-implant rings, and their location in relation to the teeth. Bone thickness measurements were assessed in the region of the mini-implants’ trajectory. Differences between the sexes was verified using the ANOVA test (5% significance). Results: 73 cases were planned with 4 mini-implants and 62 cases, with 6 mini-implants. In 90% of cases, teeth #16 and #26 were used as supports, and the most used expander screw was 13mm (64.1% of cases). The anterior mini-implants of conventional MARPE showed more pronounced insertion in bone in males (5.9 ± 2mm; p= 0.025). The extra mini-implants (anterior region) were inserted with greater bone thickness in males (11.1 ± 2.3mm) compared to females (9.9 ± 1.8mm; p=0.041). A greater bone thickness was observed in males (10.1 ± 2.1 mm) when using mini-implants in the paramedian region. Conclusion: Additional rings allow more pronounced bone insertion. Male patients had greater bone thickness, which may be related to greater difficulty in opening the sutures. The alveolar process region seems to be a satisfactory site for mini-implants to those patients with reduced bone thickness in the paramedian posterior region. MARPE appliance must be customized for each patient, due to bone thickness and anatomical variations.

ABSTRACT Introduction: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. Objective: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. Material and Methods: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: This study aimed to evaluate enamel surface roughness and microhardness following the use of different bracket materials (metal or ceramic), etchants (total- and self-etchants), and adhesive systems (precoated or flash-free). Method: A total of 99 extracted human premolars were selected for the analysis. The surface roughness was first assessed (roughness control). One specimen from each subgroup was examined using a scanning electron microscope to illustrate the surface topography. Eighty-eight teeth were prepared using total- or self-etchants and bonded to precoated or flash-free adhesive metal or ceramic brackets. The remaining 11 specimens were not bonded to brackets (microhardness controls). The brackets were debonded after immersion in distilled water for 24 h. The specimens were again scanned for surface roughness and topography imaging. Finally, the microhardness was assessed using a micro-Vickers hardness test at a force of 200 g for 10 s. Result: An overall statistically significant increase in surface roughness and reduced surface microhardness were observed in all experimental groups when compared with those in the control groups. The etchant type was the only variable found to contribute to the measured surface properties, with increased roughness and reduced microhardness introduced by total-etching compared to those by self-etching. Conclusion: Orthodontic brackets introduced a significant increase in enamel surface roughness and reduce microhardness compared with untreated enamel, regardless of the bracket material, etchant type, and adhesive system. The etchant type was the only variable contributing to these changes, with total etching having a more pronounced effect.

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aimed to evaluate enamel surface roughness and microhardness following the use of different bracket materials (metal or ceramic), etchants (total- and self-etchants), and adhesive systems (precoated or flash-free). A total of 99 extracted human premolars were selected for the analysis. The surface roughness was first assessed (roughness control). One specimen from each subgroup was examined using a scanning electron microscope to illustrate the surface topography. Eighty-eight teeth were prepared using total- or self-etchants and bonded to precoated or flash-free adhesive metal or ceramic brackets. The remaining 11 specimens were not bonded to brackets (microhardness controls). The brackets were debonded after immersion in distilled water for 24 h. The specimens were again scanned for surface roughness and topography imaging. Finally, the microhardness was assessed using a micro-Vickers hardness test at a force of 200 g for 10 s. An overall statistically significant increase in surface roughness and reduced surface microhardness were observed in all experimental groups when compared with those in the control groups. The etchant type was the only variable found to contribute to the measured surface properties, with increased roughness and reduced microhardness introduced by total-etching compared to those by self-etching. Orthodontic brackets introduced a significant increase in enamel surface roughness and reduce microhardness compared with untreated enamel, regardless of the bracket material, etchant type, and adhesive system. The etchant type was the only variable contributing to these changes, with total etching having a more pronounced effect. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Bilateral Class II intermaxillary elastics (CII elastics) are commonly used in orthodontics; however, the effects of CII elastics on masticatory muscle activity and the occlusal contact area have not been studied. Objectives: To evaluate the short‐term effects of CII elastics on masticatory muscle activity balance, occlusal contact area and masticatory performance in a group of adult orthodontic patients after 3 months. Materials and Methods: Forty‐three patients with a <3 mm Class II molar relationship receiving ongoing treatment with fixed appliances were recruited. The experimental group (n = 21) wore CII elastics (100–150 g/side) full time; the control group (n = 22) did not wear CII elastics. Surface electromyography, the areas of occlusal contact and near contact (ACNC) and the median particle size of a test food were assessed prior to (T0) and after one (T1) and 3 months (T2). Within‐ and between‐group differences were analysed and the relationships between changes in dependent variables were examined (α = 0.05). Results: At T2, the experimental group showed better masticatory muscle activity balance (p <.001) and masticatory performance (p <.05) than controls. Both masticatory muscle activity balance (p <.001) and masticatory performance (p <.001) significantly improved in the experimental group between T0 and T2. The changes in masticatory muscle activity balance and masticatory performance were significantly related (p <.05). No significant changes in cumulative ACNC or ACNC balance were observed (p >.05). Conclusion: After 3 months, CII elastics improved masticatory muscle activity balance, which led to better masticatory performance. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: This prospective study compared pain perception, intensity, and analgesic use among patients treated with fixed appliances (FAs) and clear aligners (CAs) over 6 months., Methods: Digital surveys were collected from 87 adult patients treated with CA or FA from 2 orthodontic offices. The 7-item survey was sent at 3-time points (preappointment, 2-day postappointment, and 7-day postappointment) for each appointment. Wilcoxon, t test, and Fisher exact chi-square tests were performed with significance set at 0.05., Results: The FA group had a higher rate and intensity of pain 2 days after the second, third, and fifth appointments (P <0.030). At 7 days postappointment, the FA group had a higher rate and intensity of pain for the first and fifth appointments. Dull pain was reported the most in both groups, with a proportion of FA patients reporting throbbing (31%) or sharp (20%) pain (P = 0.035) at 2 days postappointment. The CA group reported the most pain at rest, whereas the FA group reported chewing as the most painful (P = 0.002). The FA group had a higher rate of analgesic consumption after the first appointment (P = 0.037)., Conclusions: Both the FA and CA groups experienced similar rates and intensities of pain 2 days after the delivery of appliances at the first appointment. Although CA pain intensity remained minimal, FA pain peaked 2 days postappointment whenever a new orthodontic stimulus was introduced and remained elevated 7 days postappointment when that stimulus was a new archwire material., (Copyright © 2024 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: This study aimed to determine the overall oral health statuses of patients with fixed orthodontic appliance and clear aligner, as well as their oral hygiene management behaviours and satisfaction., Methods: We selected 40 participants (20 each with fixed orthodontic devices and clear aligners) who visited a dental clinic. We conducted a survey to determine the oral hygiene management behaviours of the subjects and their satisfaction with their orthodontic treatment. Three measurements were also conducted at 4-week intervals to determine the oral health statuses of the subjects., Results: The Löe and Silness gingival index of patients with fixed orthodontic appliances indicated moderate gingivitis (1.1 ± 0.3), and those with clear aligners had mild gingivitis (0.6 ± 0.4) (p < 0.001). The modified O'Leary index also indicated that the degree of dental plaque deposition in the oral cavity was lower in patients treated with a clear aligner (43.0 ± 18.2 points) than in those treated with a fixed orthodontic (28.1 ± 10.9 points) (p = 0.004). Regarding oral hygiene management, the fixed orthodontic group received scaling more frequently (p = 0.006), received more oral health education (p < 0.001) and had a longer brushing time (p = 0.008) than the clear aligner group. No significant difference was observed in satisfaction between the fixed orthodontic appliance and the clear aligner., Conclusions: Regarding the oral health status by orthodontic appliance type, the clear aligner group had the advantages of reduction in dental plaque attachment and gingival health. The fixed orthodontic group exhibited better oral hygiene management behaviours. Satisfaction with orthodontic treatment was found to be similar for the two device types., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: Orthodontic treatment involving premolar extractions might improve the angulation of lower third molars, which are the teeth most often impacted. This study analyzes the impact of first/second lower premolar extraction during orthodontic therapy on the angulation of mandibular third molars., Methods: A total of 120 patients treated non-extraction (n = 40), with extraction of first (n = 40), or second lower premolars (n = 40) were included. The mesiodistal angulation of lower third molars relative to the adjacent tooth and their developmental stage were evaluated from posttreatment orthopantomograms. Between-group differences were statistically evaluated at a significance level of 0.05., Results: The orthopantomograms of 120 patients (51% female) with a median age of 15.2 years at the time of debonding were evaluated after a mean treatment duration time of 2.9 years. No difference (P > 0.05) was seen between the average angulation of the lower third molars of the right (mean = 24.4°, standard deviation [SD] 13.6°) and the left side (mean = 23.6°, SD 14.1°). No differences in the angulation of the lower third molar were found between the non-extraction and extraction groups for the right (P = 0.44) or the left side (P = 0.22). Likewise, no differences were found when comparing the first and second premolars for the right (P = 0.26) or the left side (P = 0.10). Premolar extraction was associated with an advanced root development stage of the right third molar (odds ratio 7.1; 95% confidence interval 1.1-48.1; P = 0.04), with no differences between extraction of the first or second premolar (P = 0.10)., Conclusion: Orthodontic treatment involving premolars extractions might be associated with a small acceleration in root development, but not with the angulation, of lower third molars., (© 2023. The Author(s).)

Objective: Less than ideal contacts have been reported following aligner therapy, but it is considered a transitory problem, spontaneously resolving with the phenomenon of settling. Methods : Thirty-nine orthodontic patients (14 treated with aligners; 25 with fixed appliances) were evaluated with a digital occlusal analysis system (T-scan™10), assessing Maximum Intercuspation contact simultaneity, symmetry, and relative force distribution at treatment completion and after 3 and 6 months., Results: No significant differences in occlusal contact quality were found between groups at treatment completion or follow-up. The center of force moved posteriorly and remained stable after 3 months but was located more anteriorly in females ( p = 0.01). One-third of patients (both groups combined) had marked contact force asymmetry even after 6 months' retention. Conclusion : Occlusal contacts were comparable at completion of treatment with aligners or brackets and after 3-6 months of retention. Settling did not improve marked asymmetry in all patients.

Purpose: To investigate the skeletal and dental effects of a hybrid fixed functional appliance (FFA) used with different force magnitudes for class II subdivision 1 treatment., Methods: Treatment records from 70 patients were evaluated: 35 patients were treated with a FFA with standard activation (SUS group) and 35 with a FFA with an additional force-generating spring (TSUS group). Two control groups were matched from the American Association of Orthodontists Foundation (AAOF) Craniofacial Growth Legacy Collection for comparison with the two treatment groups to determine skeletal and dental treatment effects. The cephalometric parameters at T0 (before treatment) and T1 (before debonding) were assessed using the Munich standard cephalometric analysis and by the sagittal occlusal analysis (SO) according to Pancherz. Data were analyzed statistically using SPSS., Results: No statistically significant difference for any cephalometric parameter was observed between the SUS and TSUS groups concerning the measurements at T0 and T1. Both treatment groups exhibited an effective class II therapy mainly due to a significant reduction in SNA, and ANB and an increase in SNB. In contrast to the control group, as the result of treatment a skeletal class I was achieved., Conclusion: No significant statistical differences were observed between the patient group treated with the FFA with standard activation (SUS) and those treated with an additional spring (TSUS) regarding the cephalometric parameters investigated. Both variants were equally effective in treating class II division 1 malocclusions., (© 2023. The Author(s).)

Background: The aim of the study is to evaluate the effectiveness of different toothbrushes in reducing gingival inflammation and dental biofilm removal in gingivitis patients with fixed orthodontic appliances., Methods: Following baseline clinical assessments, including the Turesky modification of the Quigley-Hein plaque index (TQHI), gingival index (GI), bleeding on probing (BOP), and probing pocket depth (PPD), all patients received nonsurgical periodontal therapy. Patients were then randomly assigned to one of three groups: conventional toothbrush (C-TB), orthodontic toothbrush (O-TB), or single-tufted toothbrush (ST-TB). Each group received tailored oral hygiene instructions based on their assigned toothbrush type. Clinical assessments were repeated and recorded in the first week, sixth week, and third month., Results: Thirty-six patients with a mean age of 23.14 ± 3.86 (18-32 years) participated in the study. All groups with twelve patients each demonstrated significant improvements in clinical parameters compared to baseline. In the sixth week, the O-TB and ST-TB groups showed significantly greater improvements in TQHI and BOP scores compared to the C-TB group (p < 0.05). By the third month, the ST-TB group maintained significantly lower TQHI and BOP scores, while the O-TB group's scores became similar to those of the C-TB group. ST-TB and C-TB groups had significantly lower GI scores than the O-TB group in all time points. Although the effectiveness of ST-TB was significantly higher than that of other toothbrushes, all toothbrushes demonstrated lower efficacy in the posterior region., Conclusions: The ST-TB was shown to be more effective in reducing gingival inflammation over three months, while it demonstrated similar efficacy to the O-TB in dental biofilm removal. Further research is necessary to substantiate these findings and to demonstrate the efficacy of this approach in promoting periodontal tissue health in patients with fixed orthodontic appliances., Trial Registration: This study was registered with the National Library of Medicine Clinical Trials Registry Platform on 19/07/2024 as NCT06510179., (© 2024. The Author(s).)

Objective: The aim was to assess adult patients' weight changes during the initial phase of orthodontic treatment (OT) with clear aligner therapy (CAT) versus fixed bracket systems (FBS)., Methods: This pilot prospective cohort study included systemically-healthy adults who were treated with CAT or FBS. Participants with eating disorders and/or undergoing dietary programs were excluded. Weight was assessed using a calibrated digital scale at the start of OT (T1), 6-8 weeks (T2), and 12-16 weeks (T3) after starting OT. A questionnaire was used to record demographic variables, diet and exercise habits, self-reported compliance and discomfort during OT, and use of analgesics. Repeated measures analysis of variance was used to assess the association between treatment type (FBS versus CT) and time-period (T1, T2, T3) on participants' weight while adjusting for baseline covariates such as age, gender, height, and weight., Results: Forty-two participants (CAT group: 22 and FBS group: 20) were analysed. In the CAT group, there was a slight initial mean weight gain of 0.2 Kg (~ 0.4 pounds) (T2-T1), and 0.8 Kg (~ 1.7 pounds) overall mean weight loss between T1 and T3. For the FBS group, there was a slight initial weight loss of 0.3 Kg (~ 0.7 pounds) (T2-T1) and no overall change between T1 and T3. Treatment type (CAT versus FBS) was not significantly associated with weight changes during the initial phase of OT., Conclusions: There were no significant differences in the weight changes during the initial phase of OT with CAT compared with FBS., Clinical Relevance: Clear aligner therapy should not be advertised as a weight loss strategy., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose: This study aims to assess whether orthodontic bonding systems prevent orthodontic-induced white spot lesions (OIWSLs), exploring efficacy and identifying associated factors through a comprehensive systematic review of existing evidence., Materials and Methods: The study complied to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Two evaluators screened records, and data were extracted on orthodontic bonding systems, outcomes, and participant characteristics from PubMed/MEDLINE, Cochrane Library, and EM Premium. The search equation focused on white spot lesions and orthodontic bonding. Only in-vivo studies and clinical trials on humans were included, while in-vitro studies were excluded. The risk of bias was assessed using Cochrane's RoB2 tool for RCTs and ROBINS-I tool for non-randomized studies, evaluating key domains related to bias., Results: The systematic review, including 12 articles with 550 participants and 2,000 teeth, revealed that bonding with nanoparticles of nCaF2-primer and amorphous calcium phosphate-containing adhesives effectively reduced WSLs. In contrast, one-step adhesive without primer (GC Ortho Connect™) was associated with higher and more severe WSLs. Fluoride-releasing primers (Opal Seal™ and Clearfil™) did not exhibit an advantage in demineralization reduction. The inclusion of TiO2 nanoparticles in two studies yielded conflicting results on antibacterial effects., Discussion: Various nanoparticles incorporated into adhesives or primers exhibit promise in preventing white spot lesions in fixed orthodontic treatment. However, the used evaluation methods, such as clinical examinations or advanced imaging, significantly impact result interpretation. The effectiveness of orthodontic adhesives in preventing WSLs should balance between biocompatibility, bond strength and demineralization control tailored to patient-specific needs.

Introduction: This study aimed to compare the efficiency of temporary anchorage devices (TADs) and fixed functional appliances (FFAs) for mandibular molar protraction., Methods: Orthodontic records of 1050 consecutively treated patients with molar protraction were screened. Thirty-six records (22 females and 14 males; mean age, 17.4 years) were divided into two groups: TAD (21 subjects with 25 edentulous spaces) and FFA (15 subjects with 24 edentulous spaces). The primary outcome measure was the efficiency of protraction [magnitude and time required for protraction (rate) and anchor loss (AL)]. The secondary outcomes involved measuring the type of tooth movement (TOTM), external apical root resorption (EARR), alveolar bone height change (ABHC), alveolar bone width change (ABWC) and appliance failure., Results: The rate of tooth movement was significantly higher for FFAs (0.83 ± 0.35 mm/month) versus TADs (0.49 ± 0.2 mm/month) (P = .005). Total treatment duration was less for FFAs (34.78 ± 8.1 months) versus TADs (47.72 ± 13.94 months) (P = .002). TOTM was similar for both (P = .909). EARR was 1.42 ± 1.38 mm for TAD and 1.25 ± 0.88 mm for FFA (P = .81). ABHC increased in the FFA group (1.01 ± 3.62 mm) and decreased for the TAD group (0.68 ± 1.66 mm). ABWC increased for both TAD (1.81 ± 1.73 mm) and FFA (1.75 ± 1.35 mm). The failure rate was 50% for FFAs and 33% for TADs., Conclusions: Both systems provided translation of lower molars with comparable anchorage control. However, FFAs were more efficient than TADs for lower molar protraction., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: This investigation compared the extent of external apical root resorption (EARR) in root-filled teeth (RFT) and their contralateral vital pulp teeth (VPT) counterparts during orthodontic treatment (OT) with clear aligner (CA) treatment or fixed appliance (FA) treatment., Methods: Sixty-six patients with similar baseline American Board of Orthodontics (ABO) discrepancy index scores were divided into two groups: 37 patients (21 females, 16 males; mean age 17.45 ± 2.67 years) in the FA group, and 29 patients (18 females, 11 males; mean age 18.33 ± 1.96 years) in the CA group. Digital panoramic radiographs captured pre- and post-OT were used to measure tooth lengths and root surface measurements in mandibular molars. EARR in both RFT and contralateral VPT was evaluated pre- and post-OT. Statistical analysis employed paired t-tests, independent t-tests, and analysis of covariance (ANCOVA) (p < .05)., Results: All teeth exhibited varying degrees of EARR following OT. FA treatment resulted in significantly longer treatment duration (p < .05) and greater EARR compared to CA treatment (p < .05). Moreover, statistically significant differences in EARR were observed within both groups between RFT and VPT (p < .05)., Conclusions: Comparison of pre- and post-OT radiographs revealed different degrees of EARR in all teeth. CA treatment resulted in less frequent and less severe EARR compared to FA treatment. RFT demonstrated greater resistance to EARR than VPT in both treatment groups., (© 2024. The Author(s).)

Objectives: Simplifying interdental space cleaning is a constantly discussed topic. The present study aimed to compare the cleansing efficacy of an oral irrigator with that of dental flossing in adolescent patients with fixed braces after four weeks of home-use., Materials and Methods: The study design is a randomized, single-blinded cross-over study. Following a twenty-eight-day period of product utilization in a home setting, a comparative analysis was conducted on hygiene indices, the Rustogi Modified Navy Plaque Index (RMNPI) and the Gingival Bleeding Index (GBI), between the test group (oral irrigator) and the control group (dental floss)., Results: Seventeen adolescent individuals completed the study. After 28 days of cleaning with the oral irrigator, RMNPI was 58.81% (55.31-66.47) compared to 59.46% (52.68-68.67) with dental floss (p = 0.070). Subgroup analyses did not indicate the superiority of either method. GBI after the test phase with the oral irrigator was 28.93% (23.21-33.97) and insignificantly higher compared to 26.40% (21.01-31.41) achieved with dental floss (p = 0.1585)., Conclusions: Neither of the two products demonstrated statistically significant superiority in terms of cleaning efficacy. Therefore, no recommendation can be made in favor of one over the other. It was found that the high initial hygiene indices for fixed orthodontic appliances could be improved through increased awareness and precise instruction., Clinical Relevance: For adolescent patients who struggle to use interdental brushes an oral irrigator may be suggested as a simple alternative in hard-to-reach areas, such as those around a fixed dental appliance., (© 2024. The Author(s).)

Background: White spot lesions (WSL) are common side effects of orthodontic treatment with fixed appliances, in which the surface layer of enamel is demineralised. Thus, remineralisation, that is a partial or complete reversal, of these lesions can occur as they affect the surface enamel. Remineralisation with low-dose fluoride, in addition to optimal oral hygiene and diet, has been recommended to manage WSL. The aim of the planned trial is to assess the effectiveness of a fluoride-containing bioactive glass toothpaste (BioMin™) in its ability to remineralise post-orthodontic demineralised WSL., Methods: A single-centre, double-blind randomised clinical trial to assess intervention with Bio-Min toothpaste on WSL forming on the teeth of young people completing orthodontic treatment., Discussion: Remineralisation of WSL can vary depending on the individual and the site of the lesion. There is a range of oral fluoride delivery methods which include toothpastes, oral rinses, and gel preparations, which can aid remineralisation of these lesions. Identifying effective methods of remineralisation to manage this common and unsightly complication of fixed appliance therapy can improve the health and aesthetics of dentition., Trial Registration: ISRCTN.com International Standard Randomised Controlled Trials Number (ISRCTN) 14479893 . Registered on 14 May 2020., (© 2024. Crown.)

Early orthodontic treatment is an important means of preventing and treating dentofacial deformities during the period of growth and development. In this stage, children have great potential in growth and development, high adaptability of muscles and temporomandibular joint, and good responsiveness to orthodontic force. Therefore, orthodontic intervention and treatment in this stage can prevent and guide the normal growth and development of dentition, occlusion and maxillofacial complex. This article summarizes the commonly used orthodontic techniques and appliances in the mixed dentition, including interceptive treatment of oral habits, application of functional appliances, fixed appliances, clear aligners, as well as management of severe crowding and space maintenance. This article comprehensively explains the application and indications of different orthodontic techniques in design and appliance selection in the treatment of malocclusions in the mixed dentition.

Introduction: Shared decision making (SDM) involves presenting patients with relevant information about a health issue and reaching a clinical decision based on their preferences. However, its application in orthodontics lacks documentation., Objective: This study aimed to assess and compare the perspectives of patients and clinicians on SDM in different cases., Methods: A cross-sectional study was conducted at a tertiary care hospital in Pakistan, involving 90 patients categorized into three groups (dentofacial orthopedics, orthognathic surgery, and conventional non-surgical fixed appliance treatment). Following clinical assessment and treatment plan discussions, patients and clinicians completed a 12-item dyadic observing patient involvement in decision making (OPTION) questionnaire, to gauge their perspectives on SDM. Mean OPTION scale scores were compared using paired sample t-tests between clinicians and patients, and intergroup comparisons utilized paired sample t-tests and Pearson correlation coefficients., Results: OPTION scores were similar between patients/parents and clinicians. However, statistically significant differences were found regarding the questions about "different sources of information", "different options (including the possibility of doing nothing)" and "concerns regarding management", with the patients giving overall lower OPTION scores. Patients gave lower SDM OPTION scores for conventional orthodontic treatment, but higher scores for orthopedic and orthognathic surgery, as compared to the clinicians., Conclusions: The current study revealed an overall consensus in the mean total scores of OPTION scales between patients and clinicians. However, when stratified, patients showed higher SDM scores for orthopedic and orthognathic cases, and lower scores for conventional orthodontic treatment.

Objectives: To assess the influence of Invisalign precision bite ramp use on skeletal deep overbite correction and root length and volume of maxillary anterior teeth., Materials and Methods: This was a retrospective study of 60 adults with skeletal deep overbite. Patients were divided into three groups: Invisalign (Align Technology, San Jose, Calif) with precision bite ramps (Invisalign with Bite Ramps [IBR] = 12), Invisalign with no bite ramps (INBR = 22), and full-fixed appliances (FFA = 26). Cone beam computed tomography records at T1 (pretreatment) and T2 (posttreatment) were used to measure eight skeletal, nine dental, and three soft-tissue cephalometric variables. Maxillary anterior teeth root length (mm), root volume (mm3), and percent root volume loss between T1 and T2 (%) were also recorded., Results: Significant changes from T1 to T2 among the three groups were seen in ANB(o), lower face height (%), ODI (overbite depth indicator) (o), and U1-SN (o). Reduction in root length was significantly less (P < .001) in the INBR and IBR groups compared to the FFA group. Reduction in root volume and percent volume loss were significantly higher in the INBR group compared to the IBR group (P < .001), but the difference between the two Invisalign groups and the FFA group was not significant., Conclusions: Skeletal deep overbite correction using Invisalign with or without bite ramps is comparable to FFA. Reduction in root length was significantly less with Invisalign compared to FFA. Bite ramps influenced root volume and volume loss but not root length., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Objectives: To compare vertical and transverse changes in mixed dentition patients treated with the Invisalign First System (IFS) to those treated with a banded hyrax expander with fixed appliances (Hyrax) and control groups, and to assess the efficiency rate of dental arch expansion with IFS., Materials and Methods: The study included 80 mixed dentition patients, with 40 in each group (IFS and Hyrax) and 40 controls from the American Association of Orthodontists Foundation Craniofacial Growth Legacy Collection. Skeletal and dental vertical dimension changes and arch width changes between pretreatment (T1) and posttreatment (T2) were evaluated., Results: Age at T1, time interval (T1-T2), sex, and Angle class did not significantly differ among the groups. Mandibular plane angle changes showed a similar reduction for the control and IFS groups, with no changes in the Hyrax group. However, the differences among the three groups did not reach statistical significance (P = .06). The Hyrax group showed significantly greater expansion in maxillary intermolar width compared to the IFS group, 4.4 vs 2.5 mm, respectively. The efficiency of maxillary expansion using IFS ranged from 52.3% to 76.87%., Conclusions: During the mixed dentition stage, no significant changes occurred in vertical dimensions among the control, Hyrax, and IFS groups. Although there was a trend suggesting a greater reduction in mandibular plane angle in the IFS group compared to the Hyrax group, this may not be clinically significant given the less than 1° difference. IFS can be a viable option for addressing mild arch width deficiencies, with a predictable increase in intermolar width of approximately 2.5 mm., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Objective: The purposes of this study were to evaluate the survival rate of a tube-type mandibular fixed retainer and compare it to conventional multistrand retainers., Materials and Methods: In all, 66 patients who had completed their orthodontic treatment were enrolled in this study. They were allocated randomly to a tube-type retainer group or a 0.020 multistrand fixed retainer group. In case of the tube-type retainer, a thermoactive 0.012 NiTi was placed into 6 mini-tubes passively bonded to the anterior teeth. The patients were recalled at 1, 3, 6, 12, and 24 months after retainer placement. During the 2‑year follow-up period, any first-time failure of retainers was recorded. Kaplan-Meier survival analysis and log-rank tests were used to compare the failure rates between the two types of retainers., Results: Of the 34 patients, 14 (41.2%) showed failure in the multistrand retainer group, whereas only 2 of 32 (6.3%) reported failure in the tube-type retainer group. There was a statistically significant difference in failure between the multistrand retainer and the tube-type retainer (log-rank test, P = 0.001). The hazard ratio was 11.937 (95% confidence interval 2.708-52.620; P = 0.005)., Conclusion: The tube-type retainer can be used with fewer concerns about recurrent retainer detachments during orthodontic retention., (© 2023. Springer Medizin Verlag GmbH, ein Teil von Springer Nature.)

Data Sources: The Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Scopus, Web of Science, Google Scholar, Trip, CINAHL via EBSCO, EMBASE via OVID and ProQuest searched up to June 2023. Any clinical study with parallel arms and matched malocclusion severity should include permanent dentition participants with mild to mild-to-moderate anterior crowding. Participants should have undergone orthodontic treatment with either orthodontic labial fixed appliances or removable clear aligners. Total treatment time (primary outcome), chair time, number of appointments, and emergency visits (secondary outcomes) should also be reported., Study Selection: Two reviewers selected the studies to be considered in two stages. If needed, a third reviewer was included to solve discrepancies. Endnote and Rayyan software supported the process., Data Extraction and Synthesis: The same two reviewers independently extracted the required data from the included studies. If needed, a third reviewer was included to solve discrepancies. Endnote and Rayyan software supported the process., Results: Ten studies were finally included (six RCTs and four non-RCTs). Only one included samples in which teeth were extracted due to crowding. The total included sample was 718 participants (aged 20-29 years). Only one study did not report crowding equivalency between groups., Conclusions: Based on low to very low certainty levels, treatment duration is likely similar, chair time and emergency visits are less frequent, and the number of appointments is increased with clear aligners., (© 2024. The Author(s), under exclusive licence to British Dental Association.)

This paper describes the orthodontic treatment of two cases that were successful in winning the William Houston Gold Medal at the Membership in Orthodontics Examinations of the Royal College of Surgeons of Edinburgh in 2022. Both cases discuss the management of palatally impacted maxillary canines and treatment was initiated during the emerging COVID-19 crisis and completed over a 27-month period. The first case describes the management of a 15-year-old female with a Class II division 1 incisor relationship complicated by a palatally impacted upper left canine, moderate upper and lower arch crowding, and a lower centreline discrepancy with an associated right lateral displacement on closure. Treatment involved open surgical exposure of the impacted canine, a quad helix appliance, premolar extractions, and upper and lower fixed appliances. The second case describes the management of a 14-year-old female with a Class III incisor relationship complicated by bilaterally impacted maxillary canines, impeded eruption of the lower right second molar, moderate lower and severe upper arch crowding, and an upper centreline discrepancy. These case reports aim to demonstrate the high standards of care achieved by Orthodontic Specialty Trainee Registrars in the UK and provide aspirational standards for future trainees., Competing Interests: Declaration of conflicting interestsThe author declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Objectives: To compare the effectiveness and side effects of miniscrew-assisted rapid maxillary expansion (MARME) with conventional rapid maxillary expansion (RME) in the treatment of transverse maxillary deficiency. Materials and methods: We conducted a systematic review and meta-analysis of randomized controlled trials (RCTs). We searched in the MEDLINE, Embase, and Cochrane Central databases. The quality of included RCTs was evaluated using the Cochrane risk-of-bias tool. The primary outcome was the extent of dentoskeletal expansion achieved. Secondary outcomes were the dental and periodontal side effects. We calculated summary weighted mean differences (MD) with 95% confidence intervals (CI) using random-effects meta-analysis. Results: Six RCTs involving 287 participants met the inclusion criteria. Compared to conventional RME, MARME was associated with a greater palatal suture opening (mm) measured at the anterior nasal spine (MD = 1.21, 95% CI 0.75 to 1.66), first premolars (MD = 1.13, 95% CI 0.72 to 1.55), first molars (MD = 1.18, 95% CI 0.28 to 2.09), and posterior nasal spine (MD = 1.14, 95% CI 0.30 to 1.98), increased palatal width (mm) at the first molars (MD = 0.75, 95% CI 0.30 to 1.20), and reduced buccal inclination (degrees) of the first premolars (MD = − 6.06, 95% CI − 10.36 to − 1.76) and first molars (MD = − 3.17, 95% CI − 5.35 to − 0.99). Conclusions: MARME is associated with the following advantages over traditional tooth-borne RME: increased palatal suture opening, increased palatal width, and reduced buccal tooth inclination. Registration: This study is registered with PROSPERO, CRD42021256750. Clinical relevance: MARME may be preferred over conventional RME in cases with fused mid-palatal sutures or where further buccal tooth inclination is undesirable. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Skeletal class III malocclusion is a therapeutic challenge in orthodontic practice. Reverse functional appliances such as reverse twin block (RTB) are used to correct class III skeletal and occlusal disharmonies associated with functional anterior shift in growing patients. However, treatment options become limited with increasing age, especially when patients desire nonsurgical and nonextraction camouflage treatment. This report illustrates the successful nonsurgical treatment of class III malocclusion during adolescence and adulthood, exacerbated by a functional anterior shift that resulted in overclosure of the mandible. A modified fixed RTB was utilized to posture the mandible backwards, thereby inducing active clockwise rotation of the mandible. After treatment, patients demonstrated significantly improved maxillomandibular relationships, well-maintained stable occlusion, and facial esthetics. Satisfactory occlusal, esthetic, and functional outcomes achieved in the present cases underline the fact that dentoalveolar changes induced by fixed RTB can be utilized even past a patient's peak pubertal growth period to obtain changes that aid in correcting a class III malocclusion. A synergistic combination of modified fixed RTB therapy accompanied by comprehensive fixed mechanotherapy is a viable treatment alternative for the correction of aptly selected mild to moderate skeletal class III malocclusions associated with functional anterior shift, anterior crossbites, and mandibular overclosure., (This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: To study and compare the effects of clear aligners without brackets and traditional fixed aligners in orthodontic treatment., Methods: The samples were collected from January 2022 to April 2023. The control group (n = 26) received orthodontic treatment using traditional fixed appliances. The research group (n = 20) received orthodontic treatment using the clear aligners without brackets. Compare the therapeutic effects and related evaluation indicators between two groups., Results: The total effective ratio was compared between the 2 groups, and the study group was greater(P < 0.05). After treatment, the detected values of the periodontal condition indicators (plaque index, debris index, and gingival bleeding index), serum inflammatory factors (CRP, IL-6 and TNF-α) of the two groups, were less than before, also were all less than the control group. (P < 0.05). After therapy, in comparison of the control group, the value of mastication efficiency, comfort and psychological evaluation, sleep indicators and the points of the four dimensions of life quality in the study group was greater, and the detection results were obviously greater than before(P < 0.05)., Conclusion: In the orthodontic therapy of sufferers with malocclusion, compared with the traditional fixed appliance, the clear aligners without brackets can enhance the treatment effects, improve the periodontal condition and masticatory function, and reduce the inflammatory responses, so that patients can feel more comfortable, thereby improving their psychology, sleep and quality of life. In the future, with the continual advancement of technology and people's pursuit of beauty, the application of clear aligners without brackets in orthodontic treatment will become more and more extensive. The continuous introduction of new materials and new technologies will further improve the effects and comfort of the clear aligners without brackets, reduce treatment time and discomfort, and also reduce patients' resistance to aligners, bringing patients a better treatment experience., (© 2024. The Author(s).)

Introduction: Oral microbiota of patients is impacted during orthodontic treatment. The objective of this systematic review was to observe the evolution of oral microbiota (primary objective) and periodontal health (secondary objective) during orthodontic treatment, and to compare these changes during treatment with vestibular fixed appliances and aligners., Materials and Methods: In accordance with PRISMA guidelines, an electronic search was performed in four databases until January 2022, completed by a manual search, including all prospective controlled studies, randomized or not, on the subject. Two independent authors were involved in the selection of studies, and a third author was consulted in case of disagreement. The Cochrane Collaboration's tool and ROBINS-I tool was used to assess the risk-of-bias in randomized and non-randomized trials, respectively. Finally, the risk of bias graphs were made with the robvis visualization tool., Results: Out of the 994 results obtained from these searches, 11 eligible articles were included (4 randomized clinical trials and 7 non-randomized controlled studies) with varying levels of bias. Results suggested that patients treated with aligner appliances have more favorable microbial flora and less biofilm mass during their treatment compared with those treated with fixed appliances. In addition, inflammatory marker cytokines and periodontal indices were higher in fixed orthodontic treatment compared to aligners treatment., Conclusion: Considering the limitations of this systematic review of the literature, the results suggested that aligners have a more favorable impact on the oral microbiota and periodontium compared to vestibular fixed appliances. PROSPERO registration: CRD42022276486.

Purpose: To analyze the effects of fixed appliance and invisible appliance without bracket on anterior tooth root and alveolar bone in patients with mild to moderate overcrowding of Class Ⅰmalocclusion., Methods: A total of 120 patients with mild to moderate dental crowding were selected from January 2018 to February 2022,and divided into control group and experimental group by random number table method, with 60 cases in each group. The control group was treated with traditional fixed appliance, while the experimental group was treated with invisible appliance without bracket. Cone-beam CT(CBCT) was taken before and 12 months after treatment to measure the root length and alveolar bone height and thickness of maxillary central incisor teeth, height of alveolar bone of anterior teeth lip and lingual side and cusp teeth in both groups. Statistical analysis was performed with SPSS 22.0 software package., Results: The root length changes of maxillary central incisor, lateral incisor and cusp teeth in the experimental group were significantly lower than those in the control group before and after treatment(P＜0.05). The alveolar bone height changes in the labial side and lingual palatine side of upper anterior teeth, labial side and lingual palatine side of inferior anterior teeth in the experimental group before and after treatment were significantly lower than those in the control group(P＜0.05). The thickness changes of labiolingual alveolar bone at the neck, middle root and apex of upper and inferior anterior teeth in the experimental group were significantly lower than those in the control group before and after treatment(P＜0.05)., Conclusions: Compared with fixed appliance, invisible appliance without bracket can reduce root resorption and the loss of alveolar bone height and thickness in the treatment of Class I patients with mild to moderate dental crowding.

Objective: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic., Methods: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"-slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post-debond (T3) and analysed statistically at 5%., Results: A total of 157 patients were included (56.7% female; 11.6-year-old at T1), 16.6% of which were treated with premolars extractions. Non-extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P = .04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P > .05) or the first permanent molar (0.06 mm; P > .05). No overall significant differences in absolute relapse were seen between extraction and non-extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%-confidence interval 0.08-0.88; P = .003)., Conclusion: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objectives: Evaluate long-term spontaneous occlusal changes following L7 extraction in adolescent patients., Materials and Methods: Study models of 144 participants (63 males, 81 females) retrospectively assessed prior to L7 extraction (9-16 years old; T1) and following L8 eruption (14-25 years old; T2). All received upper fixed appliances. A sub-group (n = 86) received no lower fixed appliances and acted as controls. Occlusal changes were compared between treatment (lower fixed appliance) and control (no lower fixed appliance) groups using PAR index. At T2, L8 occlusal outcome was assessed using ABO grading system., Results: Mean follow-up period 6 (SD 2) years. At T1, lower scores observed in control group for Lower Anterior (P < .001), Midline (P = .033) and Lateral Segments (P = .040) components. At T2, lower scores continued being observed in control group for Midline (P < .001) and Lateral segment (P = .019) components. Higher decrease in Lower Anterior PAR scores observed in treatment group (<.001) with comparable scores between groups at T2 (P = .057). Similar PAR score changes between groups for Lateral Segments, Overjet and Overbite components. At T2, no significant difference observed in Total PAR score reduction between control (83%) and treatment (82%) groups. Good-to-acceptable occlusal outcome of the L8 observed in 81.55% of cases at T2 with no difference between groups., Conclusion: In growing patients with mild mandibular crowding, extraction of L7 followed by upper fixed appliance therapy, leads to favourable occlusal changes over a 6-year follow-up period, with or without lower fixed appliance therapy, being an alternative extraction protocol where lower fixed appliance therapy is not recommended., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objective: The aim of this study is to assess the microbial contamination of three different brands of esthetic elastomeric ligatures., Materials and Methods: Different brands of esthetic ligatures (Unistick Pearl [American Orthodontics, Sheboygan, WI, USA], Power Sticks Pearl [Ortho Technology, Tampa, FL, USA], and Ease [Obscure, 3M Unitek, Monrovia, CA, USA]) were randomly assigned to permanent canines of 25 patients (aged 11-18 years) undergoing corrective orthodontic treatment. After 30 days, the ligatures were removed, processed, and the biofilm composition was analyzed by checkerboard DNA-DNA hybridization for 40 bacterial species. The microbiological data were analyzed using a nonparametric mixed model., Results: The ligatures presented intense microbial contamination after 30 days, but no statistically significant differences were observed among the three groups (p > 0.05). The levels of the evaluated individual species and proportions of the microbial complexes showed no statistically significant differences among the ligature groups (p > 0.05)., Conclusions: Esthetic elastomeric ligatures became multicolonized by several bacterial species after 30 days of exposure to the oral cavity. However, no relevant differences were observed among the biofilm composition formed on the different ligature brands., (© 2024. The Author(s), under exclusive licence to Springer Medizin Verlag GmbH, ein Teil von Springer Nature.)

Objective: The effectiveness of supragingival dental biofilm control during orthodontic treatment and changes in the bacterial profile were analyzed., Design: Sixty-four participants aged 12-22 years (57% female) were included in the study. Participants underwent orthodontic treatment with fixed appliances and were randomly assigned to one of the three groups, which during a period of one month: (I) used chlorhexidine digluconate (CHX), (II) used high concentration of fluoride (F) gel and (III) performed standard oral hygiene. The plaque and gingivitis index, pH of biofilm and white spot lesions (WSL) were assessed. Changes of the bacteria in the biofilm were analyzed by the quantitative polymerase chain reaction RESULTS: Increase in the plaque index, pH of biofilm, and WSL was observed during orthodontic treatment with standard oral hygiene. Large interindividual variability was present, and the effects of one-month use of fluorides and CHX on clinical parameters were not significant. Despite standard hygiene the abundance of studied biofilm bacteria increased - the most Streptoccocus mutans (14.2x) and S. salivarius (3.3x), moderate Veillonella parvula (3x) and the least S. sobrinus (2.3x) and Agregatibacter actinomycetemcomitans (1.9x). The use of CHX reduced S. sobrinus (2.2x) and A. actinomycetemcomitans (1.9x). Fluoride use reduced A. actinomycetemcomitans (1.3x) and S. sobrinus (1.2x). Fluorides better controlled S. mutans than CHX., Conclusion: Bacterial biomass in supragingival biofilm increased during treatment with metal orthodontic appliances, with greater increase in cariogenic bacteria than periopathogens. Fluoride controlled S. mutans, while CHX S. sobrinus and A. actinomycetemcomitans., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objectives: To compare self-reported pain levels across various treatment phases using passive self-ligating (Damon) and conventional (Victory) standardized fixed appliance systems., Materials and Methods: Adolescents (12-17 years old) with crowding and displaced teeth, planned for non-extraction treatment, were recruited from four orthodontic clinics. They were randomized into stratified blocks (1:1 ratio) using concealed allocation to receive Damon Q™ (34 boys, 28 girls) or Victory™ (39 boys, 31 girls). Pain and analgesic intake were assessed on seven different occasions with validated self-report questionnaires using a 10-grade scale., Results: Of the 132 patients included, six were lost to follow up. Clinically relevant mean pain scores (≥4) were registered in both groups after bonding upper and lower arches and after insertion of 0.019 × 0.025 stainless steel archwire. The highest mean scores were reported on day two after bonding the upper arch (Damon 5.96, Victory 7.18, P = .011). In both groups, at least 40% reported taking analgesics during various treatment phases. The Damon group reported a lower intake of analgesics on days one and two (P = .042 and .037) after treatment initiation. In the entire sample, boys reported significantly higher mean pain scores than girls on the second and third days after bonding (P = .008 and .026, respectively)., Conclusions: Lower pain levels were reported from the Damon group after bonding. In general, boys reported higher pain than girls did. Clinicians and adolescents need to be aware that clinically relevant pain levels can be expected not only after bonding but also in later phases., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objective: This study compared clinical outcomes between aligners and fixed appliances in class II adolescent patients., Materials and Methods: Records of 31 aligners and 35 fixed class II patients, aged 13.5 ± 1.6 years were compared. Class II elastics was the mechanism employed for correcting the malocclusion. DI scores were used to compare initial complexity, and the PAR index scores were used to compare the clinical outcomes. Data on demographics, treatment and finishing durations, number of visits and refinements, duration of class II correction, and changes in the IMPA were collected., Results: The mean pre-, post-treatment, and overall reduction in PAR index scores between the groups were not significantly different (P > 0.05). The clear aligners group had significantly shorter treatment duration (20.0 ± 11.6 months) than the fixed group (27.4 ± 9.1 months) (P < 0.001). The number of visits for the aligners' group was significantly less (12.7 ± 6.2) than in the fixed group (17.8 ± 5.8) (P < 0.001). Duration for class II correction was significantly shorter for clear aligners (13.3 ± 10.0 months) compared to the fixed group (17.4 ± 9.0 months) (P = 0.026). A smaller post-treatment change in IMPA (2 ± 6°) was detected in the aligners group compared to the fixed group (5 ± 6°) (P < 0.05)., Conclusions: Treatment outcomes for aligners in class II adolescent patients were comparable to those achieved in fixed appliances. Shorter treatment and class II correction durations, fewer visits, and better control for the IMPA were noticed in the aligners' group., Clinical Relevance: Treating class II adolescent patients with aligners seems promising and demands shorter treatment time and fewer visits., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background and Objectives : To compare the oral-health-related quality of life (OHRQoL) outcomes between patients treated with modified Ni-Ti spring-based alignment appliances or conventional fixed appliances using the Oral Health Impact Profile 14 (OHIP-14), as well as the levels of satisfaction with the appliance appearance, treatment progress, and outcomes. Materials and Methods : Thirty-six patients (11 males, 25 females) were randomly divided into two groups: either the modified aligner appliance with Ni-Ti springs group (MAA) or the traditional fixed appliances group (FA). The allocation ratio was 1:1, and the randomization process was carried out by an independent investigator not involved in this study. Mild crowding cases were included in this study. The OHRQoL of patients was evaluated using the short-form Oral Health Impact Profile (OHIP-14) at five time points: before the treatment commencement (T0); 2 weeks (T1), 1 month (T2), and 2 months (T3) after the treatment initiation; and post-treatment (T4). The visual analog scale (VAS) was used to evaluate the patient satisfaction. Blinding was performed only during the outcomes assessment. Results : This randomized controlled trial had no dropouts, and the demographic characteristics of the groups were comparable. The MAA group experienced significantly greater functional limitations compared with the FA group at all three evaluation time points (T1, T2, and T3), as evidenced by the statistically significant p -values ( p = 0.004, p = 0.001, and p < 0.001, respectively). The psychological disability in the MAA group was significantly lower than in the FA group at both T2 ( p = 0.005) and T3 ( p = 0.003). The patient satisfaction with the appliance appearance was significantly higher in the MAA group than in the FA group ( p = 0.002). Conclusions : The OHRQoL improved in both the modified aligner appliance with Ni-Ti springs and fixed appliance groups after the treatment. Moreover, the functional limitations during the treatment were less severe in the FA group, while the psychological disability was lower, and the patient satisfaction with the appliance appearance was higher in the MAA group.

Introduction: Extraction vs. non-extraction is a crucial decision in orthodontic therapy., Objective: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system., Material and Methods: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant., Results: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01)., Conclusion: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.

Objectives: To evaluate leveling of the Curve of Wilson (COW) by two different treatment appliances (clear aligners [CA] and continuous archwire fixed appliances [FA]) in a permanent dentition sample of patients., Materials and Methods: Digital casts of 40 patients (CA group = 20 patients; FA group = 20 patients) were collected. Angular values for COW, right and left vertical height difference of lower first molars, and linear distance between lower teeth and the WALA ridge were analyzed for pre- (T1), posttreatment (T2) and on final virtual (ClinCheck) models (T2-CC) of the CA group. An unpaired t-test was used to evaluate significant intergroup differences (P < .05), while a paired t-test was used for posttreatment CA intragroup comparison., Results: FA group showed better control of second molar crown positions compared to CA group (47-WALA = -0.2 ± 0.1 mm, 37-WALA = -0.6 ± 0.3 mm). No significant difference was detected for linear distance of lower first molars and the WALA ridge or for vertical height difference. CA group showed a greater reduction of distance between lower premolars and the WALA ridge (mean difference: -0.5 mm for both 45-WALA and 35-WALA; mean difference: -0.5 mm for 44-WALA, -0.6 mm for 34-WALA). Predictability for the CA group was high for every measurement (87% Right COW, 89% Left COW, 88% 46 Vertical Diff, 87% 36 Vertical Diff)., Conclusions: Clear aligner and continuous archwire mechanics were effective in leveling COW. FA was more effective in changing crown position of lower second molars with respect to the WALA ridge, while CA provided a greater distance reduction between lower premolars and WALA ridges compared to FA., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Introduction: Understanding the rationale for adult patients undertaking orthodontic treatment and the impact of appliances on their quality of life has become increasingly important to research efforts and clinical care. This study aimed to understand why adult patients undergo orthodontic treatment and their overall experience with the choice of appliance., Methods: A cross-sectional qualitative study using semistructured interviews with adult patients from 4 private specialist orthodontic practices in the London region involving a purposive homogeneous sampling technique to obtain variation regarding gender, treatment modalities (fixed ceramic [FC], removable aligner [RA], and fixed lingual [FL] appliances), and stages of treatment (early, late, and posttreatment stage) was undertaken. A piloted topic guide was used to standardize data collection. Interviews were audio recorded, and field notes were taken. Data were transcribed verbatim and analyzed using framework methodology until data saturation was reached., Results: A total of 22 participants (FC, 8; RA, 8; and FL, 6), with a mean age of 38.9 ± 11.7 years, with the majority being female (n = 13; 59.1%), were interviewed. Psychosocial and dental health-related factors were reported as the main reasons to seek orthodontic treatment. Social factors and appliance features influence an adult's decision-making in selecting a specific orthodontic appliance. Wearing FC, RA, and FL was seen to have both positive and negative impacts on an adult's quality of life. Functional and psychological factors were the strong influencers on patients' treatment experience., Conclusions: The study highlighted the influence of psychosocial factors and dental health concerns in the decision-making processes of adults seeking orthodontic treatment. FC, RA, and FL appear to affect an adult's quality of life, with functional and psychosocial factors being commonly reported., (Crown Copyright © 2024. Published by Elsevier Inc. All rights reserved.)