Search

Here we introduce Z-lock, an optogenetic approach for reversible, light-controlled steric inhibition of protein active sites. The light oxygen voltage (LOV) domain and Zdk, a small protein that binds LOV selectively in the dark, are appended to the protein of interest where they sterically block the active site. Irradiation causes LOV to change conformation and release Zdk, exposing the active site. Computer-assisted protein design was used to optimize linkers and Zdk-LOV affinity, for both effective binding in the dark, and effective light-induced release of the intramolecular interaction. Z-lock cofilin was shown to have actin severing ability in vitro, and in living cancer cells it produced protrusions and invadopodia. An active fragment of the tubulin acetylase αTAT was similarly modified and shown to acetylate tubulin on irradiation.

O’Shaughnessy et al. present new software called ImageTank to process lattice light-sheet images of FRET biosensors. ImageTank efficiently handles large 3D datasets and includes tools for visualization and analysis. Its capabilities are demonstrated using a new Rap1 biosensor in motile cells., Lattice light-sheet microscopy (LLSM) is valuable for its combination of reduced photobleaching and outstanding spatiotemporal resolution in 3D. Using LLSM to image biosensors in living cells could provide unprecedented visualization of rapid, localized changes in protein conformation or posttranslational modification. However, computational manipulations required for biosensor imaging with LLSM are challenging for many software packages. The calculations require processing large amounts of data even for simple changes such as reorientation of cell renderings or testing the effects of user-selectable settings, and lattice imaging poses unique challenges in thresholding and ratio imaging. We describe here a new software package, named ImageTank, that is specifically designed for practical imaging of biosensors using LLSM. To demonstrate its capabilities, we use a new biosensor to study the rapid 3D dynamics of the small GTPase Rap1 in vesicles and cell protrusions.

We systematically evaluated the performance and reliability of several widely used, commercially available actin-filament probes in a highly motile breast adenocarcinoma cell line to optimize the visualization of F-actin-rich dynamic lamellipodia. We evaluated four Phalloidin-fluorophores, two anti-actin antibodies, and three live-cell actin probes in five fixation conditions across three imaging platforms as a basis for the design of optimized protocols. Of the fluorescent phalloidin-dye conjugates tested, Alexa Fluor-488 Phalloidin ranked best in overall labeling of the actin cytoskeleton and maintenance of the fluorescence signal over time. Use of actin monoclonal antibodies revealed significant limitations under a variety of fixation–permeabilization conditions. Evaluation of commonly used live-cell probes provides evidence for actin filament bias, with TagRFP-Lifeact excluded from lamellipodia, but not mEGFP-Lifeact or F-tractin-EGFP.

Summary We describe an approach to study the conformation of individual proteins during single particle tracking (SPT) in living cells. "Binder/tag" is based on incorporation of a 7-mer peptide (the tag) into a protein where its solvent exposure is controlled by protein conformation. Only upon exposure can the peptide specifically interact with a reporter protein (the binder). Thus, simple fluorescence localization reflects protein conformation. Through direct excitation of bright dyes, the trajectory and conformation of individual proteins can be followed. Simple protein engineering provides highly specific biosensors suitable for SPT and FRET. We describe tagSrc, tagFyn, tagSyk, tagFAK, and an orthogonal binder/tag pair. SPT showed slowly diffusing islands of activated Src within Src clusters and dynamics of activation in adhesions. Quantitative analysis and stochastic modeling revealed in vivo Src kinetics. The simplicity of binder/tag can provide access to diverse proteins.

Over the past decade, two independent technologies have emerged and been widely adopted by the neuroscience community for remotely controlling neuronal activity: optogenetics which utilize engineered channelrhodopsin and other opsins, and chemogenetics which utilize engineered G protein-coupled receptors (Designer Receptors Exclusively Activated by Designer Drugs (DREADDs)) and other orthologous ligand–receptor pairs. Using directed molecular evolution, two types of DREADDs derived from human muscarinic acetylcholine receptors have been developed: hM3Dq which activates neuronal firing, and hM4Di which inhibits neuronal firing. Importantly, these DREADDs were not activated by the native ligand acetylcholine (ACh), but selectively activated by clozapine N-oxide (CNO), a pharmacologically inert ligand. CNO has been used extensively in rodent models to activate DREADDs, and although CNO is not subject to significant metabolic transformation in mice, a small fraction of CNO is apparently metabolized to clozapine in humans and guinea pigs, lessening the translational potential of DREADDs. To effectively translate the DREADD technology, the next generation of DREADD agonists are needed and a thorough understanding of structure–activity relationships (SARs) of DREADDs is required for developing such ligands. We therefore conducted the first SAR studies of hM3Dq. We explored multiple regions of the scaffold represented by CNO, identified interesting SAR trends, and discovered several compounds that are very potent hM3Dq agonists but do not activate the native human M3 receptor (hM3). We also discovered that the approved drug perlapine is a novel hM3Dq agonist with >10 000-fold selectivity for hM3Dq over hM3.

Actomyosin supracellular networks emerge during development and tissue repair. These cytoskeletal structures are able to generate large scale forces that can extensively remodel epithelia driving tissue buckling, closure and extension. How supracellular networks emerge, are controlled and mechanically work still remain elusive. During Drosophila oogenesis, the egg chamber elongates along the anterior-posterior axis. Here we show that a dorsal-ventral polarized supracellular F-actin network, running around the egg chamber on the basal side of follicle cells, emerges from polarized intercellular filopodia that radiate from basal stress fibers and extend penetrating neighboring cell cortexes. Filopodia can be mechanosensitive and function as cell-cell anchoring sites. The small GTPase Cdc42 governs the formation and distribution of intercellular filopodia and stress fibers in follicle cells. Finally, our study shows that a Cdc42-dependent supracellular cytoskeletal network provides a scaffold integrating local oscillatory actomyosin contractions at the tissue scale to drive global polarized forces and tissue elongation., During development, organs undergo large scale forces driven by the cytoskeleton but the precise molecular regulation of cytoskeletal networks remains unclear. Here, the authors report a Cdc42-dependent supracellular cytoskeletal network integrates local actomyosin contraction at tissue scale and drives global tissue elongation.

The spatial and temporal organization of protein activity is an essential but poorly understood aspect of cellular signaling. Optogenetics is emerging as a powerful tool for precise modulation of specific protein's activity within living cells and animals. For non-channel proteins, optical control of protein activity has been accomplished through light-regulated protein dimerization, oligomerization, and by light-controlled steric block of a protein or peptide active site using the LOV (light-oxygen-voltage) domain. Illumination triggers a conformational change in LOV that reversibly releases the steric block. A challenge in this approach has been the difficulty of controlling the orientation of LOV in the dark to efficiently block the protein site. Recently our lab has generated a novel LOV-binding protein based on z-affibodies, a class of engineered protein scaffold. Our z-affibody (termed Zdk) binds selectively to the dark state of LOV ( 4 μM affinity in the light). We show that Zdk can be used to control the orientation of LOV in the dark state and efficiently block the actin-binding site of cofilin in a light-dependent, reversible manner. To make photoactivatable cofilin (PA-cofilin), Zdk was fused to the N-terminus of cofilin and LOV was fused to the C-terminus. We used Rosetta-based molecular modeling to rationally design linkers that oriented the Zdk-LOV complex over the actin-binding interface and also to rationally design Zdk variants with a range of affinities for LOV. Using a Zdk of the optimum affinity for LOV was found to be critical in the design. PA-cofilin undergoes a five-fold increase in actin-binding in response to light, demonstrating the tight control of protein activity that can be achieved using Zdk. Ongoing studies using PA-cofilin to probe the role of cofilin in polarized migration will be described.

The spatial and temporal organization of protein activity controls the flow of information through signaling networks. Optogenetics, the regulation of protein activity with light, has proven very useful to dissect the role of spatio-temporal control by inducing specific protein activities with seconds and microns resolution in living cells. However, current methods are not applicable to many important proteins. Here we describe Zlock, a broadly applicable optogenetic method to control protein or small-peptide activity in living cells using modifications of Zdark (Zdk), a small protein that binds only to the dark state of the LOV2 domain from Phototropin. The LOV2 domain undergoes a reversible conformational change induced by 400-500 nm light. Zdk, derived by screening a library of Z domain variants of protein A, binds selectively to the dark state of LOV2 with dark Kd 10 micromolar. In the “Zlock” system, Zdk and LOV2 are fused to the N- and C- termini of a target protein or small-peptide. In the dark, they bind to one another and cover or distort the active site. Upon irradiation they release one another in less than a second, freeing the active site for target interaction. We have engineered Zdk for the reversible intramolecular binding needed in the Zlock design. We have successfully applied Zlock to generate photoactivatable analogs of important cytoskeletal regulators including cofilin and Alpha Tubulin Acetyltransferase 1 (ATAT). Photoactivation of cofilin and ATAT in live cells controls cell protrusion and microtubule acetylation, and has demonstrated a clear role for cofilin in regulating directionality during cancer cell migration. Current work is focused on ‘caging’ photoactivatable small-peptide inhibitors of Cdc42, PP1, JNK and Gqα, to control endogenous proteins with light.

Background Hydrophobic interaction chromatography (HIC) most commonly requires experimental determination (i.e., scouting) in order to select an optimal chromatographic medium for purifying a given target protein. Neither a two-step purification of untagged green fluorescent protein (GFP) from crude bacterial lysate using sequential HIC and size exclusion chromatography (SEC), nor HIC column scouting elution profiles of GFP, have been previously reported. Methods and Results Bacterial lysate expressing recombinant GFP was sequentially adsorbed to commercially available HIC columns containing butyl, octyl, and phenyl-based HIC ligands coupled to matrices of varying bead size. The lysate was fractionated using a linear ammonium phosphate salt gradient at constant pH. Collected HIC eluate fractions containing retained GFP were then pooled and further purified using high-resolution preparative SEC. Significant differences in presumptive GFP elution profiles were observed using in-line absorption spectrophotometry (A395) and post-run fluorimetry. SDS-PAGE and western blot demonstrated that fluorometric detection was the more accurate indicator of GFP elution in both HIC and SEC purification steps. Comparison of composite HIC column scouting data indicated that a phenyl ligand coupled to a 34 µm matrix produced the highest degree of target protein capture and separation. Conclusions Conducting two-step protein purification using the preferred HIC medium followed by SEC resulted in a final, concentrated product with >98% protein purity. In-line absorbance spectrophotometry was not as precise of an indicator of GFP elution as post-run fluorimetry. These findings demonstrate the importance of utilizing a combination of detection methods when evaluating purification strategies. GFP is a well-characterized model protein, used heavily in educational settings and by researchers with limited protein purification experience, and the data and strategies presented here may aid in development other of HIC-compatible protein purification schemes.

In contrast to other chromatographic methods for purifying proteins (e.g. gel filtration, affinity, and ion exchange), hydrophobic interaction chromatography (HIC) commonly requires experimental determination (referred to as screening or "scouting") in order to select the most suitable chromatographic medium for purifying a given protein (1). The method presented here describes an automated approach to scouting for an optimal HIC media to be used in protein purification. HIC separates proteins and other biomolecules from a crude lysate based on differences in hydrophobicity. Similar to affinity chromatography (AC) and ion exchange chromatography (IEX), HIC is capable of concentrating the protein of interest as it progresses through the chromatographic process. Proteins best suited for purification by HIC include those with hydrophobic surface regions and able to withstand exposure to salt concentrations in excess of 2 M ammonium sulfate ((NH(4;))(2;)SO(4;)). HIC is often chosen as a purification method for proteins lacking an affinity tag, and thus unsuitable for AC, and when IEX fails to provide adequate purification. Hydrophobic moieties on the protein surface temporarily bind to a nonpolar ligand coupled to an inert, immobile matrix. The interaction between protein and ligand are highly dependent on the salt concentration of the buffer flowing through the chromatography column, with high ionic concentrations strengthening the protein-ligand interaction and making the protein immobile (i.e. bound inside the column) (2). As salt concentrations decrease, the protein-ligand interaction dissipates, the protein again becomes mobile and elutes from the column. Several HIC media are commercially available in pre-packed columns, each containing one of several hydrophobic ligands (e.g. S-butyl, butyl, octyl, and phenyl) cross-linked at varying densities to agarose beads of a specific diameter (3). Automated column scouting allows for an efficient approach for determining which HIC media should be employed for future, more exhaustive optimization experiments and protein purification runs (4). The specific protein being purified here is recombinant green fluorescent protein (GFP); however, the approach may be adapted for purifying other proteins with one or more hydrophobic surface regions. GFP serves as a useful model protein, due to its stability, unique light absorbance peak at 397 nm, and fluorescence when exposed to UV light (5). Bacterial lysate containing wild type GFP was prepared in a high-salt buffer, loaded into a Bio-Rad DuoFlow medium pressure liquid chromatography system, and adsorbed to HiTrap HIC columns containing different HIC media. The protein was eluted from the columns and analyzed by in-line and post-run detection methods. Buffer blending, dynamic sample loop injection, sequential column selection, multi-wavelength analysis, and split fraction eluate collection increased the functionality of the system and reproducibility of the experimental approach.