Search

Due to the rise of e-mobility applications, there is an increased demand to create more accurate control methods, which can reduce the loss in an e-drive system. The accurate modeling of the rotating machines needs to resolve a partial differential equation system that describes the thermal and mechanical behavior of the different parts in addition to the electromagnetic design. Due to these models' limited resources and high computation demand, they cannot be used directly for real-time control. Model order reduction methods have been of growing interest in the past decades and offer solutions for this problem. According to the processed literature, many model order reduction-based methods are used for a wide range of problems. However, a paper has not been published that discusses a model order reduction-based real-time control model that is actually used in the industry. This paper aims to summarize and systematically review the model order reduction methods developed for rotating electrical machines in the last two decades and examine the possible usage of these methods for a real-time control problem. [ABSTRACT FROM AUTHOR]

Induction heating is a clear, cheap, and highly effective technology used for many industrial and commercial applications. Generally, a time-varying magnetic field produces the required heat in the workpiece with a specially designed coil. The efficiency of the heating process depends highly on the coil design and the geometrical arrangement. A detailed and accurate finite element analysis of the induction heating process usually needs to resolve a coupled thermoelastic–magnetic problem, whose parameters values depend on the solution of another field. The paper deals with a shrink-fitting process design problem: a gear should be assembled with an axe. The interesting part of this case study is given the prescribed low limits for critical stress, the temperature of the gear material, and the heat-treated wearing surfaces. A coupled finite-element-based model and a genetic algorithm-based parameter determination methodology were presented. A thermal imaging-based measurement validated the presented numerical model and parameter determination task. The results show that the proposed methodology can be used to calibrate and validate the numerical model and optimize an induction heating process. [ABSTRACT FROM AUTHOR]

Additive manufacturing of soft magnetic materials is a promising technology for creating topologically optimized electrical machines. High-performance electrical machines can be made from high-silicon-content FeSi alloys. Fe-6.5wt%Si material has exceptional magnetic properties; however, manufacturing this steel with the classical cold rolling methodology is not possible due to the brittleness of this material. Laser powder bed fusion technology (L-PBF) offers a solution to this problem. Finding the optimal printing parameters is a challenging task. Nevertheless, it is crucial to resolve the brittleness of the created materials so they can be used in commercial applications. The temperature dependence of magnetic hysteresis properties of Fe-6.5wt%Si materials is presented in this paper. The magnetic hysteresis properties were examined from 20 °C to 120 °C. The hysteresis measurements were made by a precision current generator–based hysteresis measurement tool, which uses fast Fourier transformation–based filtering techniques to increase the accuracy of the measurements. The details of the applied scalar hysteresis sensor and the measurement uncertainties were discussed first in the paper; then, three characteristic points of the static hysteresis curve of the ten L-PBF-manufactured identical toroidal cores were investigated and compared at different temperatures. These measurements show that, despite the volumetric ratio of the porosities being below 0.5%, the mean crack length in the samples is not significant for the examined samples. These small defects can cause a significant 5% decrement in some characteristic values of the examined hysteresis curve. [ABSTRACT FROM AUTHOR]

The European Union's increasing focus on sustainable and eco-friendly product design has resulted in significant pressure on original equipment manufacturers to adopt more environmentally conscious practices. As a result, the remanufacturing of end-of-life electric machines is expected to become a promising industrial segment. Identifying the missing parameters of these types of machines will play an essential role in creating feasible and reliable redesigns and remanufacturing processes. A few case studies related to this problem have been published in the literature; however, some novel, openly accessible benchmark problems can facilitate the research and function as a basis for comparing and validating novel numerical methods. This paper presents the identification process of an experimental synchronous machine. It outlines methodologies for identifying material properties, winding schemes, and other critical parameters for the finite element analysis and modelling of electric machines with incomplete information. The machine in question is intended for remanufacturing, with the plan to replace its faulty winding with an aluminium-based alternative. It also serves as an open benchmark problem for researchers, designers, and practitioners. [ABSTRACT FROM AUTHOR]

Due to the growing pressure from governmental entities and customers in the European Union, Original Equipment Manufacturers are being pushed to design and manufacture sustainable and environmentally friendly products. A profitable industrial segment is expected to emerge from recycling end-of-life electric machines. This paper aims to identify an experimental synchronous reluctance machine with faulty copper windings to remanufacture the machine. The rewound design aims to achieve similar or improved characteristics and fit the novel requirements of the circular economy. The recyclability of the machine can be significantly increased by changing the copper windings to aluminum-based hairpin windings. The paper shows the geometrical, material, and winding identification plus finite element method-based analysis of the initial machine. The electric machine's slot-filling factor can be improved using an appropriate aluminum-based hairpin winding design compared to the original, even in the case of standard slots where the sides of the slots are not parallel. [ABSTRACT FROM AUTHOR]

A good transformer design satisfies certain functions and requirements. We can satisfy these requirements by various designs. The aim of the manufacturers is to find the most economic choice within the limitations imposed by the constraint functions, which are the combination of the design parameters resulting in the lowest cost unit. One of the earliest application of the Geometric Programming [GP] is the optimization of power transformers. The GP formalism has two main advantages. First the formalism guarantees that the obtained solution is the global minimum. Second the new solution methods can solve even large-scale GPs extremely efficiently and reliably. The design optimization program seeks a minimum capitalized cost solution by optimally setting the transformer's geometrical and electrical parameters. The transformer's capitalized cost chosen for object function, because it takes into consideration the manufacturing and the operational costs. This paper considers the optimization for three winding, three phase, core-form power transformers. This paper presents the implemented transformer cost optimization model and the optimization results.

Many machine learning-based document processing applications have been published in recent years. Applying these methodologies can reduce the cost of labor-intensive tasks and induce changes in the company's structure. The artificial intelligence-based application can replace the application of trainees and free up the time of experts, which can increase innovation inside the company by letting them be involved in tasks with greater added value. However, the development cost of these methodologies can be high, and usually, it is not a straightforward task. This paper presents a survey result, where a machine learning-based legal text labeler competed with multiple people with different legal domain knowledge. The machine learning-based application used binary SVM-based classifiers to resolve the multi-label classification problem. The used methods were encapsulated and deployed as a digital twin into a production environment. The results show that machine learning algorithms can be effectively utilized for monotonous but domain knowledge- and attention-demanding tasks. The results also suggest that embracing the machine learning-based solution can increase discoverability and enrich the value of data. The test confirmed that the accuracy of a machine learning-based system matches up with the long-term accuracy of legal experts, which makes it applicable to automatize the working process. [ABSTRACT FROM AUTHOR]

Cost optimization of power transformers is a complex engineering task. The design engineers have to solve this multidisciplinary, non-linear optimization problem in a very short-time. Due to the importance of the topic, numerous optimization methods have been developed in the industry to solve this problem. These methods generally use different, simplified two-winding transformer models, where the windings are generally modeled by their copper filling factors. These models cannot consider the eddy current losses and the temperature gradients of the windings properly, because the calculation of these quantities needs knowledge of the conductor dimensions. This paper proposes a novel method, which uses a general geometric programming search based sub-problem to determine the optimal conductor dimensions for the optimal winding shape. The proposed method considers the temperature gradients of the windings and uses FEM to determine the eddy losses of the windings. The whole optimization process is made by an evolutionary algorithm (NSGA-II)-based search. The paper presents this novel transformer optimization methodology and then illustrates it with a practical example. [ABSTRACT FROM AUTHOR]