Search

Upconverting particles (UCPs), renowned for their capability to convert infrared to visible light, serve as invaluable imaging probes. Furthermore, their responsiveness to diverse external stimuli holds promise for leveraging UCPs as remote multiparametric sensors, capable of characterizing medium properties in a single assessment. However, the utility of UCPs in multiparametric sensing is impeded by crosstalk, wherein distinct external stimuli induce identical alterations in UCP luminescence, hindering accurate interpretation, and yielding erroneous outputs. Overcoming crosstalk requires alternative strategies in upconverting luminescence analysis. In this study, it is shown how a single spinning NaYF4:Er3+, Yb3+ upconverting particle enables simultaneous and independent readings of temperature and viscosity. This is achieved by decoupling thermal and rehological measurements—employing the luminescence of thermally‐coupled energy levels of Er3+ ions for thermal sensing, while leveraging the polarization of luminescence from non‐thermally coupled levels of Er3+ ions to determine viscosity. Through simple proof‐of‐concept experiments, the study validates the capability of a single spinning UCP to perform unbiased, simultaneous temperature, and viscosity sensing, thereby opening new avenues for advanced sensing in microenvironments. [ABSTRACT FROM AUTHOR]

Liquid-like protein condensates have recently attracted much attention due to their critical roles in biological phenomena. They typically show high fluidity and reversibility for exhibiting biological functions, while occasionally serving as sites for the formation of amyloid fibrils. To comprehend the properties of protein condensates that underlie biological function and pathogenesis, it is crucial to study them at the single-condensate level; however, this is currently challenging due to a lack of applicable methods. Here, we demonstrate that optical trapping is capable of inducing the formation of a single liquid-like condensate of α-synuclein in a spatiotemporally controlled manner. The irradiation of tightly focused near-infrared laser at an air/solution interface formed a condensate under conditions coexisting with polyethylene glycol. The fluorescent dye-labeled imaging showed that the optically induced condensate has a gradient of protein concentration from the center to the edge, suggesting that it is fabricated through optical pumping-up of the a-synuclein clusters and the expansion along the interface. Furthermore, Raman spectroscopy and thioflavin T fluorescence analysis revealed that continuous laser irradiation induces structural transition of protein molecules inside the condensate to β-sheet rich structure, ultimately leading to the condensate deformation and furthermore, the formation of amyloid fibrils. These observations indicate that optical trapping is a powerful technique for examining the microscopic mechanisms of condensate appearance and growth, and furthermore, subsequent aging leading to amyloid fibril formation. [ABSTRACT FROM AUTHOR]

Nanoparticles (NPs), including perovskite nanocrystals (PNCs) with single photon purity, present challenges in fluorescence correlation spectroscopy (FCS) studies due to their distinct photoluminescence (PL) behaviors. In particular, the zero‐time correlation amplitude [g2(0)] and the associated diffusion timescale (τD) of their FCS curves show substantial dependency on pump intensity (IP). Optical saturation inadequately explains the origin of this FCS phenomenon in NPs, thus setting them apart from conventional dye molecules, which do not manifest such behavior. This observation is apparently attributed to either photo‐brightening or optical trapping, both lead to increased NP occupancy (N) in the excitation volume, consequently reducing the g2(0) amplitude [since g2(0) α 1/N] at high IP. However, an advanced FCS study utilizing alternating laser excitation at two different intensities dismisses such possibilities. Further investigation into single‐particle blinking behaviors as a function of IP reveals that the intensity dependence of g2(0) primarily arises from the brightness heterogeneity prevalent in almost all types of NPs. This report delves into the complexities of the photophysical properties of NPs and their adverse impacts on FCS studies. [ABSTRACT FROM AUTHOR]

The performances of few‐layered (FL) material‐based devices are usually fixed after fabrication and difficult to be further dynamically tuned. As the thickness approaches the atomic scale, moving FL materials on solid substrates is challenging due to the substantial increase in interfacial friction and simultaneous decrease in stiffness. Here, believed to be the first, optical trapping of FL materials on dry solid substrates is demonstrated, with attractive advantages of ultralow excitation power (µW level), high precision, and wear‐free. The trapping mechanism relies on photothermal shock‐induced thermal gradient force traps. Precise motion control including translation and rotation is achieved, with step resolutions of ≈0.15 nm and ≈1.6 × 10−3 degrees per laser pulse, respectively. Direct locomotion of FL materials with a minimal thickness of 2.5 nm and indirect locomotion of tri‐layers MoS2 (≈1.9 nm thickness) by optically dragging multilayered sections are demonstrated. Furthermore, in situ construction of homo‐ and heterostructures and dynamic modulation of nanowire lasing spectra are showcased. This study will facilitate in situ fabrication of nanoelectronic/photonic devices with both structures and performances dynamically tuned. [ABSTRACT FROM AUTHOR]

This study investigates the promotion of sodium chlorate (NaClO3) crystallization through optical trapping, enhanced by the addition of gold nanoparticles (AuNPs) and silicon nanoparticles (SiNPs). Using a focused laser beam at the air–solution interface of a saturated NaClO3 solution with AuNPs or SiNPs, the aggregates of these particles were formed at the laser focus, the nucleation and growth of metastable NaClO3 (m-NaClO3) crystals were induced. Continued laser irradiation caused these m-NaClO3 crystals to undergo repeated cycles of growth and dissolution, eventually transitioning to a stable crystal form. Our comparative analysis showed that AuNPs, due to their significant heating due to higher photon absorption efficiency, caused more pronounced size fluctuations in m-NaClO3 crystals compared to the stable behavior observed with SiNPs. Interestingly, the maximum diameter of the m-NaClO3 crystals that appeared during the size fluctuation step was consistent, regardless of nanoparticle type, concentration, or size. The crystallization process was also promoted by using polystyrene nanoparticles, which have minimal heating and electric field enhancement, suggesting that the reduction in activation energy for nucleation at the particle surface is a key factor. These findings provide critical insights into the mechanisms of laser-induced crystallization, emphasizing the roles of plasmonic heating, particle surfaces, and optical forces. [ABSTRACT FROM AUTHOR]

In recent years, Raman spectroscopy has garnered growing interest in the field of biomedical research. It offers a non-invasive and label-free approach to defining the molecular fingerprint of immune cells. We utilized Raman spectroscopy on optically trapped immune cells to investigate their molecular compositions. While numerous immune cell types have been studied in the past, the characterization of living human CD3/CD28-stimulated T cell subsets remains incomplete. In this study, we demonstrate the capability of Raman spectroscopy to readily distinguish between naïve and stimulated CD4 and CD8 cells. Additionally, we compared these cells with monocytes and discovered remarkable similarities between stimulated T cells and monocytes. This paper contributes to expanding our knowledge of Raman spectroscopy of immune cells and serves as a launching point for future clinical applications. [ABSTRACT FROM AUTHOR]

Copyright of Laser Technology is the property of Gai Kan Bian Wei Hui and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Micro and nano-scale manipulation of living matter is crucial in biomedical applications for diagnostics and pharmaceuticals, facilitating disease study, drug assessment, and biomarker identification. Despite advancements, trapping biological nanoparticles remains challenging. Nanotweezer-based strategies, including dielectric and plasmonic configurations, show promise due to their efficiency and stability, minimizing damage without direct contact. Our study uniquely proposes an inverted hybrid dielectric–plasmonic nanobowtie designed to overcome the primary limitations of existing dielectric–plasmonic systems, such as high costs and manufacturing complexity. This novel configuration offers significant advantages for the stable and long-term trapping of biological objects, including strong energy confinement with reduced thermal effects. The metal's efficient light reflection capability results in a significant increase in energy field confinement (EC) within the trapping site, achieving an enhancement of over 90% compared to the value obtained with the dielectric nanobowtie. Numerical simulations confirm the successful trapping of 100 nm viruses, demonstrating a trapping stability greater than 10 and a stiffness of 2.203 fN/nm. This configuration ensures optical forces of approximately 2.96 fN with an input power density of 10 mW/μm2 while preserving the temperature, chemical–biological properties, and shape of the biological sample. [ABSTRACT FROM AUTHOR]

Holographic Metasurfaces (HMs) in the visible range enable advanced imaging applications in compact, planarized systems. The ability to control and structure light with high accuracy and a high degree of freedom is particularly relevant in lab‐on‐chip biophotonic applications. Pushing the operation wavelength into the blue region and below is an open challenge. Here, it is demonstrated that Zirconium dioxide (ZrO2) metasurfaces (MSs) are particularly well‐suited to satisfy these requirements. Specifically, MSs are designed for optical trapping applications with a high numerical aperture (NA = 1.2) at a wavelength as low as 488 nm, with trap stiffness >200 pN (µmW)−1. [ABSTRACT FROM AUTHOR]

In this work is a low-cost and custom-designed optical tweezers using two He-Ne lasers (λ=632.8 nm) positioned in parallel is developed to trap and manipulate micron-sized particles. Polystyrene beads in water and yeast cells in yogurt culture were used as samples. To determine the characteristics of these optical tweezers, the stiffness and trapping force were determined using the Brownian Motion method for Laser 1, Laser 2 and the case where both lasers were used simultaneously. Small adjustments of the optical components affected the trapping force, resulting in a lower trapping force for Laser 2. In addition, the viscosity of the scattering medium has a significant effect on the trapping force; the higher viscosity of the yogurt culture prevents the capture of yeast cells with the simultaneous use of both lasers. The use of two lasers in parallel allows one laser to be used to capture and move particles while the other is used to capture multiple particles. This custom-designed optical tweezer, whose performance was investigated for different samples, has the potential to be applied in life science fields such as viscosity measurements, intracellular investigations, food engineering and drug delivery systems. [ABSTRACT FROM AUTHOR]

Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects, ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in the life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nano-particle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration.

Current optical tweezering techniques are actively employed in the manipulation of nanoparticles, e.g., biomedical cells. However, there is still huge room for improving the efficiency of manipulating multiple nanoparticles of the same composition but different shapes. In this study, we designed an array of high-index all-dielectric disk antennas, each with an asymmetric open slot for such applications. Compared with the plasmonic counterparts, this all-dielectric metasurface has no dissipation loss and, thus, circumvents the Joule heating problem of plasmonic antennas. Furthermore, the asymmetry-induced excitation of quasi-bound states in continuum (QBIC) mode with a low-power intensity (1 mW/µm2) incidence imposes an optical gradient force of −0.31 pN on 8 nm radius nanospheres, which is four orders of magnitude stronger than that provided by the Fano resonance in plasmonic antenna arrays, and three orders of magnitude stronger than that by the Mie resonance in the same metasurface without any slot, respectively. This asymmetry also leads to the generation of large optical moments. At the QBIC resonance wavelength, a value of 88.3 pN-nm will act on the nanorods to generate a rotational force along the direction within the disk surface but perpendicular to the slot. This will allow only nanospheres but prevent the nanorods from accurately entering into the slots, realizing effective sieving between the nanoparticles of the two shapes. [ABSTRACT FROM AUTHOR]

Using tight focusing light, optical tweezers (OT) are tools that can manipulate and capture microscopic particles and biological cells as well as characterize a wide range of micro and nanomaterials. In this paper, we focused on fibroblasts, which are widely used in the biomedical area for a variety of purposes, including promoting human wound healing and preventing the early proliferation of tumor cells. We first built an optical tweezer experimental platform, using an 808 nm continuous-wave laser as the capture light source, to confirm that the device can precisely control the movement of single or multiple particles as well as fibroblasts. Then, a 1030 nm femtosecond laser was employed as the capture light source to study the manipulation of microparticles and fibroblasts at different powers. Lastly, a protracted manipulation protocol was used to prevent the fibroblasts from adhering to the wall. This method can be used to isolate and precisely block adherent growth of fibroblasts in cell populations. This experimental result can be further extended to other biological cells. [ABSTRACT FROM AUTHOR]

In recent years, Raman spectroscopy has garnered growing interest in the field of biomedical research. It offers a non-invasive and label-free approach to defining the molecular fingerprint of immune cells. We utilized Raman spectroscopy on optically trapped immune cells to investigate their molecular compositions. While numerous immune cell types have been studied in the past, the characterization of living human CD3/CD28-stimulated T cell subsets remains incomplete. In this study, we demonstrate the capability of Raman spectroscopy to readily distinguish between naïve and stimulated CD4 and CD8 cells. Additionally, we compared these cells with monocytes and discovered remarkable similarities between stimulated T cells and monocytes. This paper contributes to expanding our knowledge of Raman spectroscopy of immune cells and serves as a launching point for future clinical applications.

Nucleosome DNA unwrapping and its disassembly into hexasomes and tetrasomes is necessary for genomic access and plays an important role in transcription regulation. Previous single-molecule mechanical nucleosome unwrapping revealed a low- and a high-force transitions, and force-FRET pulling experiments showed that DNA unwrapping is asymmetric, occurring always first from one side before the other. However, the assignment of DNA segments involved in these transitions remains controversial. Here, using high-resolution optical tweezers with simultaneous single-molecule FRET detection, we show that the low-force transition corresponds to the undoing of the outer wrap of one side of the nucleosome (∼27 bp), a process that can occur either cooperatively or noncooperatively, whereas the high-force transition corresponds to the simultaneous unwrapping of ∼76 bp from both sides. This process may give rise stochastically to the disassembly of nucleosomes into hexasomes and tetrasomes whose unwrapping/rewrapping trajectories we establish. In contrast, nucleosome rewrapping does not exhibit asymmetry. To rationalize all previous nucleosome unwrapping experiments, it is necessary to invoke that mechanical unwrapping involves two nucleosome reorientations: one that contributes to the change in extension at the low-force transition and another that coincides but does not contribute to the high-force transition.

Optical tweezers have a wide range of uses for mechanical manipulation of objects in the microscopic range. This includes both living and static cells in a variety of biomedical and research applications. Single‐focus optical tweezers, formed by focusing a laser beam through a high numerical aperture immersion objective, create a significant force, which enables controlled transport of a variety of different cell types and morphologies in three dimensions. Optical tweezers have been previously reported to capture and separate spermatozoa from a reconstituted simulated postcoital sample. We report herein the development of a simplified, more efficient cell transfer protocol that can separate and isolate both spermatozoa as well as leukocytes, with similar efficiencies as those previously reported. The new cell transfer method was used to separate sperm cells from a reconstituted mixture of spermatozoa and vaginal epithelial cells, with complete STR profiles developed from 50 cells with little evidence of contribution from the female contributor to the mixture. This modified protocol was then used to separate 21 samples of enriched leukocytes, with trapped cells ranging from 5 to 22 cells. Complete STR profiles were developed from as few as 10 leukocytes. Thus, with minimal sample preparation and a short trapping time, this method has the potential to provide an alternative to traditional differential extraction methods for separation of sperm:nonsperm mixtures while also providing versatility for separation of cells with differing morphologies. [ABSTRACT FROM AUTHOR]

Higher magic angle spinning (MAS) frequencies than currently available are desirable to improve spectral resolution in NMR and EPR systems. While conventional strategies employ pneumatic spinning limited by fluid dynamics, this paper demonstrates the development of an optical spinning technique in which vacuum quality dictates the maximum achievable spinning frequency. Using optical traps, we levitated a range of micron-sized samples. Under vacuum we achieved optical rotation of a single ∼10 μm diameter particle of vaterite at several mbar up to hundreds of Hz and of 20 μm diameter SiO2 particles at ≤10−2 mbar at several kHz. At ambient conditions, we optically levitated γ-irradiated alanine particles of 20–50 μm diameter. Additionally, using a single chip EPR detector operating at 11 GHz, we measured the EPR spectrum for a 30 μm γ-irradiated alanine particle in contact with the chip surface (i.e., without optical levitation) in a single scan lasting 92 s. These observations suggest that a γ-irradiated alanine particle having a diameter in the order of 30 μm is a promising candidate for our aim of demonstrating the first magnetic resonance experiment on optically levitated samples. Furthermore, we discuss strategies, limitations, and the potential of implementing MAS with optical traps for NMR and EPR.

Micro and nano-scale manipulation of living matter is crucial in biomedical applications for diagnostics and pharmaceuticals, facilitating disease study, drug assessment, and biomarker identification. Despite advancements, trapping biological nanoparticles remains challenging. Nanotweezer-based strategies, including dielectric and plasmonic configurations, show promise due to their efficiency and stability, minimizing damage without direct contact. Our study uniquely proposes an inverted hybrid dielectric–plasmonic nanobowtie designed to overcome the primary limitations of existing dielectric–plasmonic systems, such as high costs and manufacturing complexity. This novel configuration offers significant advantages for the stable and long-term trapping of biological objects, including strong energy confinement with reduced thermal effects. The metal’s efficient light reflection capability results in a significant increase in energy field confinement (EC) within the trapping site, achieving an enhancement of over 90% compared to the value obtained with the dielectric nanobowtie. Numerical simulations confirm the successful trapping of 100 nm viruses, demonstrating a trapping stability greater than 10 and a stiffness of 2.203 fN/nm. This configuration ensures optical forces of approximately 2.96 fN with an input power density of 10 mW/μm2 while preserving the temperature, chemical–biological properties, and shape of the biological sample.

Single particles trapped in an optical trap may experience temperature elevation, yet direct measurement of temperature and its distribution inside the optical trap of several to hundreds of microns in size remains a big challenge. We introduce a method that can measure the temperature inside a universal optical trap (UOT) using Raman spectroscopy of single trapped particles of high thermal conductivity. We measured temperature and temperature distributions inside the UOT using Raman shifts of single-walled carbon nanotubes (SWCNTs) and micron-sized diamonds (MSDs), which are heated by trapping laser beams directly or indirectly, depending on the location of the particle in the trap. We show that the temperature at the center of the UOT is much lower than the temperature along the hollow beams that form a hollow, cage-shaped UOT. In the range of the trapping laser power of 200–2950 mW, the surface temperature of particles trapped at the center of a UOT changes from 322 K to 830 K, correspondingly. This result gives a heating rate as a high thermal-absorbing particle trapped in the center of the UOT with 18.3 ± 0.4 °C/100 mW. In addition, the temperature gradient outside the UOT was also characterized by trapping SWCNT particles outside the UOT. Results show that when a light-absorbing particle is trapped for the study of material property, phase transitions, surface equilibrium process, chemical reactions, etc., this method can be used to measure temperature distribution and its variations in the trap and its surroundings. Graphical Abstract This is a visual representation of the abstract. [ABSTRACT FROM AUTHOR]

Controlling the nano‐ and micropatterning of metal structures is an important requirement for various technological applications in photonics and biosensing. This work presents a method for controllably creating silver micropatterns by laser‐induced photosculpting. Photosculpting is driven by plasmonic interactions between pulsed laser radiation and silver nanorods (AgNRs) in aqueous suspension; this process leads to optical binding forces transporting the AgNRs in the surroundings, while electronic thermalization results in photooxidation, melting, and ripening of the AgNRs into well‐defined 3D structures. This work call these structures Airy castles due to their structural similarity with a diffraction‐limited Airy disk. The photosculpted Airy castles contain emissive Ag nanoclusters, allowing for the visualization and examination of the aggregation process using luminescence microscopy. This work comprehensively examines the factors that define the photosculpting process, namely, the concentration and shape of the AgNRs, as well as the energy, power, and repetition rate of the laser. Finally, this work investigates the potential applications by measuring the metal‐enhanced luminescence of a europium‐based luminophore using Airy castles. [ABSTRACT FROM AUTHOR]

In this work, we present an enhanced nano-optical tweezers based on the new triple-nanoaperture structure for trapping nanoparticles using low power laser. Different structures with a single, double and triple-nanoaperture with nanometer gap created in 65 nm gold film, are examined. The results show there is a several times enhancement in transmission coefficient for proposed triple-nanoaperture based design. Considering this structure, the geometrical parameters like radius (R), center-to-center distance (D) and configuration of aperture have been manipulated to achieve optimum design. Using optimized parameters both transmission and optical force calculated and compared with the original structure which uses a single aperture. The results show total optical force inserted to 30 nm nanoparticle, enhanced up to 20 times as compared with the original structure. This structure and related results can be used to design new enhanced nano-optical tweezers with high accuracy for different applications. [ABSTRACT FROM AUTHOR]

Hypertrophic cardiomyopathy (HCM) is the most common inherited form of heart disease, associated with over 1,000 mutations, many in β-cardiac myosin (MYH7). Molecular studies of myosin with different HCM mutations have revealed a diversity of effects on ATPase and load-sensitive rate of detachment from actin. It has been difficult to predict how such diverse molecular effects combine to influence forces at the cellular level and further influence cellular phenotypes. This study focused on the P710R mutation that dramatically decreased in vitro motility velocity and actin-activated ATPase, in contrast to other MYH7 mutations. Optical trap measurements of single myosin molecules revealed that this mutation reduced the step size of the myosin motor and the load sensitivity of the actin detachment rate. Conversely, this mutation destabilized the super relaxed state in longer, two-headed myosin constructs, freeing more heads to generate force. Micropatterned human induced pluripotent derived stem cell (hiPSC)-cardiomyocytes CRISPR-edited with the P710R mutation produced significantly increased force (measured by traction force microscopy) compared with isogenic control cells. The P710R mutation also caused cardiomyocyte hypertrophy and cytoskeletal remodeling as measured by immunostaining and electron microscopy. Cellular hypertrophy was prevented in the P710R cells by inhibition of ERK or Akt. Finally, we used a computational model that integrated the measured molecular changes to predict the measured traction forces. These results confirm a key role for regulation of the super relaxed state in driving hypercontractility in HCM with the P710R mutation and demonstrate the value of a multiscale approach in revealing key mechanisms of disease.

Current optical tweezering techniques are actively employed in the manipulation of nanoparticles, e.g., biomedical cells. However, there is still huge room for improving the efficiency of manipulating multiple nanoparticles of the same composition but different shapes. In this study, we designed an array of high-index all-dielectric disk antennas, each with an asymmetric open slot for such applications. Compared with the plasmonic counterparts, this all-dielectric metasurface has no dissipation loss and, thus, circumvents the Joule heating problem of plasmonic antennas. Furthermore, the asymmetry-induced excitation of quasi-bound states in continuum (QBIC) mode with a low-power intensity (1 mW/µm2) incidence imposes an optical gradient force of −0.31 pN on 8 nm radius nanospheres, which is four orders of magnitude stronger than that provided by the Fano resonance in plasmonic antenna arrays, and three orders of magnitude stronger than that by the Mie resonance in the same metasurface without any slot, respectively. This asymmetry also leads to the generation of large optical moments. At the QBIC resonance wavelength, a value of 88.3 pN-nm will act on the nanorods to generate a rotational force along the direction within the disk surface but perpendicular to the slot. This will allow only nanospheres but prevent the nanorods from accurately entering into the slots, realizing effective sieving between the nanoparticles of the two shapes.

Using tight focusing light, optical tweezers (OT) are tools that can manipulate and capture microscopic particles and biological cells as well as characterize a wide range of micro and nanomaterials. In this paper, we focused on fibroblasts, which are widely used in the biomedical area for a variety of purposes, including promoting human wound healing and preventing the early proliferation of tumor cells. We first built an optical tweezer experimental platform, using an 808 nm continuous-wave laser as the capture light source, to confirm that the device can precisely control the movement of single or multiple particles as well as fibroblasts. Then, a 1030 nm femtosecond laser was employed as the capture light source to study the manipulation of microparticles and fibroblasts at different powers. Lastly, a protracted manipulation protocol was used to prevent the fibroblasts from adhering to the wall. This method can be used to isolate and precisely block adherent growth of fibroblasts in cell populations. This experimental result can be further extended to other biological cells.

Hydrogen peroxide (H2O2), a strong oxidizer, is a commonly used sterilization agent employed during aseptic food processing and medical applications. To assess the sterilization efficiency with H2O2, bacterial spores are common microbial systems due to their remarkable robustness against a wide variety of decontamination strategies. Despite their widespread use, there is, however, only little information about the detailed time-resolved mechanism underlying the oxidative spore death by H2O2. In this work, we investigate chemical and morphological changes of individual Bacillus atrophaeus spores undergoing oxidative damage using optical sensing with trapping Raman microscopy in real-time. The time-resolved experiments reveal that spore death involves two distinct phases: (i) an initial phase dominated by the fast release of dipicolinic acid (DPA), a major spore biomarker, which indicates the rupture of the spore's core; and (ii) the oxidation of the remaining spore material resulting in the subsequent fragmentation of the spores' coat. Simultaneous observation of the spore morphology by optical microscopy corroborates these mechanisms. The dependence of the onset of DPA release and the time constant of spore fragmentation on H2O2 shows that the formation of reactive oxygen species from H2O2 is the rate-limiting factor of oxidative spore death. [ABSTRACT FROM AUTHOR]

Mitochondria play a crucial role in the physiological functions and energy metabolism of neurons, which can help in the understanding of complex biochemical reactions associated with various neurodegenerative diseases. Neurons, being highly differentiated terminal cells, require a greater number of mitochondria than ordinary cells to generate significant amounts of ATP, which is necessary for the growth of differentiated neuronal structures like axons and dendrites and the transmission of electrical signals along neuronal axons. Advancements in imaging technology, electrophysiology, and fluorescence targeting labeling have facilitated the study of mitochondrial movements in neurons and axons. However, disordered mitochondrial movements can hinder their analysis and characterization. Thus, it becomes necessary to artificially control their transport. Here, we demonstrate the utilization of scanning optical tweezers (SOTs) on the stable trapping and precise transport of soma or axon of neurons and enable. The presented method provides an optical approach to the control of mitochondria or other organelles in complex and variable biological environment. [ABSTRACT FROM AUTHOR]

We used laser trapping to study the effects of suffruticosol B on lung cancer cells. Physical and mechanical changes were found to be statistically significant, with a 63.97% increase over untreated cells and a 79.57% increase over untreated cells after treatment for 3 or 6 h, respectively. The treatment affected the internal structure of the cells, with changes in their elastic properties. The cellular responses showed that treatment with suffruticosol B resulted in the decreased proliferation and invasion of cancer cells. These results suggest that the treatment may be useful in preventing or treating lung cancer.

Copyright of Laser Technology is the property of Gai Kan Bian Wei Hui and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

It is very important for holographic optical tweezers (OTs) to develop high-quality phase holograms through calculation by using some computer algorithms, and one of the most commonly used algorithms is the Gerchberg–Saxton (GS) algorithm. An improved GS algorithm is proposed in the paper to further enhance the capacities of holographic OTs, which can improve the calculation efficiencies compared with the traditional GS algorithm. The basic principle of the improved GS algorithm is first introduced, and then theoretical and experimental results are presented. A holographic OT is built by using a spatial light modulator (SLM), and the desired phase that is calculated by the improved GS algorithm is loaded onto the SLM to obtain expected optical traps. For the same sum of squares due to error SSE and fitting coefficient η, the iterative number from using the improved GS algorithm is smaller than that from using traditional GS algorithm, and the iteration speed is faster about 27%. Multi-particle trapping is first achieved, and dynamic multiple-particle rotation is further demonstrated, in which multiple changing hologram images are obtained continuously through the improved GS algorithm. The manipulation speed is faster than that from using the traditional GS algorithm. The iterative speed can be further improved if the computer capacities are further optimized. [ABSTRACT FROM AUTHOR]

The quenching in luminescence emission of an optically trapped ligand-free hydrophilic NaYF4:Yb, Er upconversion nanoparticle (UCNP) as a function of rose Bengal dye molecule is investigated here. The removal of oleate capping of the as-prepared UCNPs was achieved via acid treatment and characterized via FTIR and Raman spectroscopic techniques. Further, the capping removed hydrophilic single UCNP is optically trapped and the emission studies were carried out as a function of excitation laser power. Compared to the studies using the bulk solution, the single UCNP luminescence spectrum exhibited additional spectral lines. The excitation laser power-dependent studies using the bulk solution yield a slope value between 1 and 2 for Blue, Green 1, Green 2, and Red emission and thus indicate that upconversion is a two-photon upconversion process. On the other hand, in the case of laser power-dependent studies on an optically trapped single-particle study, Blue and Green 1 yield a slope value of less than 1 whereas Green 2 and Red emission gave a slope value between 1 and 2. The energy transfer studies between an optically trapped ligand-free single UCNP and the rose Bengal dye show a concentration-dependent quenching in the emission of Green emissions and illustrate the potential of developing sensor platforms. [ABSTRACT FROM AUTHOR]

Plasmonic slot waveguides provide extreme light confinement with the benefits of having naturally present electrodes for switching and high thermal conductivity of the metal layers to remove excess heat. Past works relied on numerical computation for these structures, which is time-consuming and lacks physical insight. Here, we present an analytical model of plasmonic slot waveguides to determine the modal properties based on single-mode matching to continuum. The model is accurate to within 3% of rigorous numerical simulations. The theory allows for rapid design and provides physical insight into mode propagation in plasmonic slot waveguides for information processing, optical manipulation, and sensing applications. [ABSTRACT FROM AUTHOR]

Scalable methods to access single-photon sources on demand are highly sought after. As a potential strategy, we demonstrate the optical trapping and chemical anchoring of NaYF4 nanoparticles (NPs) and NaYF4 NPs doped with on average a single Er3+ ion. The anchoring method we present involves surface coating the NPs with thiol-functionalized phospholipids, where the thiol group is protected with a chemical group photoremovable at 340 nm 2-bromo-4′-hydroxyacetophenone. Functionalized NPs are trapped optically in a gold double-nanohole aperture using a 980 nm laser. A 340 nm light beam is focused on the particle, resulting in deprotection of the thiol groups and attachment of the thiols to the gold surface, permanently anchoring the NPs. Electron microscopic imaging proves the successful anchoring after removal of the trapping laser, 340 nm light source, and solvent. The approach is promising for reliably fabricating a single-photon emitting material in a scalable and potentially automatable manner. [ABSTRACT FROM AUTHOR]

Mechanical forces play an important role in the behaviour of cells, from differentiation to migration and the development of diseases. Optical tweezers provide a quantitative tool to study these forces and must be combined with other tools, such as phase contrast and fluorescence microscopy. Detecting the retro-reflected trap beam is a convenient way to monitor the force applied by optical tweezers, while freeing top access to the sample. Accurate in situ calibration is required especially for single cells close to a surface where viscosity varies rapidly with height. Here, we take advantage of the well contrasted interference rings in the back focal plane of the objective to find the height of a trapped bead above a cover slip. We thus map the viscous drag dependence close to the surface and find agreement between four different measurement techniques for the trap stiffness down to 2 μm above the surface. Combining this detection scheme with phase contrast microscopy, we show that the phase ring in the back focal plane of the objective must be deported in a conjugate plane on the imaging path. This simplifies implementation of optical tweezers in combination with other techniques for biomechanical studies. [ABSTRACT FROM AUTHOR]

We used laser trapping to study the effects of suffruticosol B on lung cancer cells. Physical and mechanical changes were found to be statistically significant, with a 63.97% increase over untreated cells and a 79.57% increase over untreated cells after treatment for 3 or 6 h, respectively. The treatment affected the internal structure of the cells, with changes in their elastic properties. The cellular responses showed that treatment with suffruticosol B resulted in the decreased proliferation and invasion of cancer cells. These results suggest that the treatment may be useful in preventing or treating lung cancer. [ABSTRACT FROM AUTHOR]

Bimodal optical-electrical data generated when a 20 nm diameter silica (SiO2) nanoparticle was trapped by a plasmonic nanopore sensor were simulated using Multiphysics COMSOL and compared with sensor measurements for closely matching experimental parameters. The nanosensor, employed self-induced back action (SIBA) to optically trap nanoparticles in the center of a double nanohole (DNH) structure on top a solid-state nanopores (ssNP). This SIBA actuated nanopore electrophoresis (SANE) sensor enables simultaneous capture of optical and electrical data generated by several underlying forces acting on the trapped SiO2 nanoparticle: plasmonic optical trapping, electroosmosis, electrophoresis, viscous drag, and heat conduction forces. The Multiphysics simulations enabled dissecting the relative contributions of those forces acting on the nanoparticle as a function of its location above and through the sensor's ssNP. Comparisons between simulations and experiments demonstrated qualitative similarities in the optical and electrical time-series data generated as the nanoparticle entered and exited from the SANE sensor. These experimental parameter-matched simulations indicated that the competition between optical and electrical forces shifted the trapping equilibrium position close to the top opening of the ssNP, relative to the optical trapping force maximum that was located several nm above. The experimentally estimated minimum for the optical force needed to trap a SiO2 nanoparticle was consistent with corresponding simulation predictions of optical-electrical force balance. The comparison of Multiphysics simulations with experiments improves our understanding of the interplay between optical and electrical forces as a function of nanoparticle position across this plasmonic nanopore sensor.

We demonstrate the trapping and analysis of individual proteins using a portable optical fiber tweezer setup with a double-nanohole in a gold film coating the fiber’s end and aligned with the fiber core. The instrument was used to trap and analyze cytochrome c, carbonic anhydrase, bovine serum albumin, and PR65 (wild-type and various point mutants). This approach was compared with a free-space optical tweezer setup that requires alignment of the laser focus to the aperture, whereas the fiber-based approach is both portable and alignment-free, which holds promise for applications in antibody discovery, small molecule drug discovery, protein interaction analysis and other applications using the standard well-plate format.

Bacterial attachment on root surfaces is an important step preceding the colonization or internalization and subsequent infection of plants by pathogens. Unfortunately, bacterial attachment is not well understood because the phenomenon is difficult to observe. Here we assessed whether this limitation could be overcome using optical trapping approaches. We have developed a system based on counter-propagating beams and studied its ability to guide Pectobacterium atrosepticum (Pba) cells to different root cell types within the interstices of transparent soils. Bacterial cells were successfully trapped and guided to root hair cells, epidermal cells, border cells, and tissues damaged by laser ablation. Finally, we used the system to quantify the bacterial cell detachment rate of Pba cells on root surfaces following reversible attachment. Optical trapping techniques could greatly enhance our ability to deterministically characterize mechanisms linked to attachment and formation of biofilms in the rhizosphere. [ABSTRACT FROM AUTHOR]

A nano-optical conveyor belt is a unique type of near-field optical tweezer, capable not only of capturing nanoparticles, but also transporting them. In this study, we propose a multichannel nano-optical conveyer, based on a simple rectangular distributed grating array. The design was optimized by varying the number of slits in the gratings, and particle transport was achieved by adjusting the phase difference of the excitation beams. Simulation and calculation results indicate that multiple optical traps and parallel transport channels can be generated by exciting the gratings with four incident beams. The optical force and trapping potential were used to confirm that 20 nm metallic nanoparticles can be stably attracted to the traps and dynamically transported along channels by adjusting the phase of the excitation beams. Compared to existing nano-photon conveyors, this design boasts a straightforward structure and exceptional performance, offering a promising new approach to particle manipulation. [ABSTRACT FROM AUTHOR]

Recently, we have developed an optical tweezers technique based on nanostructured Si (Black-Si). The spike-like nanostructure enhances the electric field of the incident light, thereby strengthening the grip made by the tweezers. In the present study, we applied the tweezers to poly-(N-isopropylacrylamide) (PNIPAM) in aqueous solutions. This polymer has frequently been used as a target in the field of optical manipulation chemistry. Using the technique, we succeeded in forming a PNIPAM microdroplet on the surface of the Black-Si. The formation of PNIPAM droplets is important in polymer chemistry, analytical chemistry, and droplet chemistry. Importantly, herein, we demonstrate that the trapping behavior is very sensitive to the wavelength of the trapping laser light (1064 or 808 nm). Using 808 nm laser light, the polymer can be trapped with a 100-fold-greater efficiency compared to that using 1064 nm laser light. Moreover, with 808 nm laser light, the chemical structure of the droplet can be modulated. By changing the laser intensity at 808 nm, we succeeded in varying the internal polarity of the droplet, while at 1064 nm the polarity is fixed. The production of the PNIPAM microdroplet is purely due to the enhanced optical force of the 808 nm laser light. The selection of laser wavelength is very important in the Black-Si-based optical tweezers. [ABSTRACT FROM AUTHOR]

We calculate the fully retarded one-photon exchange interaction potential between electrically neutral, identical atoms, one of which is assumed to be in an excited state, by matching the scattering matrix (S matrix) element with the effective Hamiltonian. Based on the Feynman prescription, we obtain the imaginary part of the interaction energy. Our results lead to precise formulas for the distance-dependent enhancement and suppression of the decay rates of entangled superradiant and subradiant Dicke states (Bell states), as a function of the interatomic distance. The formulas include a long-range tail due to entanglement. We apply the result to an example calculation involving two hydrogen atoms, one of which is in an excited P state. [ABSTRACT FROM AUTHOR]