Search

Many systems are subject to periodic disturbances and exhibit repetitive behaviour. Model-based repetitive control employs knowledge of such periodicity to attenuate periodic disturbances and has seen a wide range of successful industrial implementations. The aim of this paper is to develop a data-driven repetitive control method. In the developed framework, linear periodically time-varying (LPTV) behaviour is lifted to linear time-invariant (LTI) behaviour. Periodic disturbance mitigation is enabled by developing an extension of Willems' fundamental lemma for systems with exogenous disturbances. The resulting Data-enabled Predictive Repetitive Control (DeePRC) technique accounts for periodic system behaviour to perform attenuation of a periodic disturbance. Simulations demonstrate the ability of DeePRC to effectively mitigate periodic disturbances in the presence of noise., Comment: Extended report

Model inversion is a fundamental technique in feedforward control. Unstable inverse models present a challenge in that useful feedforward control trajectories cannot be generated by directly propagating them. Stable inversion is a process for generating useful trajectories from unstable inverses by handling their stable and unstable modes separately. Piecewise affine (PWA) systems are a popular framework for modeling complicated dynamics. The primary contributions of this article are closed-form inverse formulas for a general class of PWA models, and stable inversion methods for these models. Both contributions leverage closed-form model representations to prove sufficient conditions for solution existence and uniqueness, and to develop solution computation methods. The result is implementable feedforward control synthesis from PWA models with either stable or unstable inverses. In practice, feedforward control alone may yield substantial tracking errors due to mismatch between the known system model and the unknowable complete system physics. Iterative learning control (ILC) is a technique for achieving robustness to model error in feedforward control. To demonstrate the primary contributions' validity and utility, this article also integrates PWA stable inversion with ILC in simulations based on a physical printhead positioning system., Comment: 16 pages, 6 figures

Block coordinate descent is an optimization technique that is used for estimating multi-input single-output (MISO) continuous-time models, as well as single-input single output (SISO) models in additive form. Despite its widespread use in various optimization contexts, the statistical properties of block coordinate descent in continuous-time system identification have not been covered in the literature. The aim of this paper is to formally analyze the bias properties of the block coordinate descent approach for the identification of MISO and additive SISO systems. We characterize the asymptotic bias at each iteration, and provide sufficient conditions for the consistency of the estimator for each identification setting. The theoretical results are supported by simulation examples., Comment: 6 pages, 2 figures

Iterative learning control (ILC) is capable of improving the tracking performance of repetitive control systems by utilizing data from past iterations. The aim of this paper is to achieve both task flexibility, which is often achieved by ILC with basis functions, and the performance of frequency-domain ILC, with an intuitive design procedure. The cost function of norm-optimal ILC is determined that recovers frequency-domain ILC, and consequently, the feedforward signal is parameterized in terms of basis functions and frequency-domain ILC. The resulting method has the performance and design procedure of frequency-domain ILC and the task flexibility of basis functions ILC, and are complimentary to each other. Validation on a benchmark example confirms the capabilities of the framework.

Factors like improved data availability and increasing system complexity have sparked interest in data-driven predictive control (DDPC) methods like Data-enabled Predictive Control (DeePC). However, closed-loop identification bias arises in the presence of noise, which reduces the effectiveness of obtained control policies. In this paper we propose Closed-loop Data-enabled Predictive Control (CL-DeePC), a framework that unifies different approaches to address this challenge. To this end, CL-DeePC incorporates instrumental variables (IVs) to synthesize and sequentially apply consistent single or multi-step-ahead predictors. Furthermore, a computationally efficient CL-DeePC implementation is developed that reveals an equivalence with Closed-loop Subspace Predictive Control (CL-SPC). Compared to DeePC, CL-DeePC simulations demonstrate superior reference tracking, with a sensitivity study finding a 48% lower susceptibility to noise-induced reference tracking performance degradation., Comment: DOIs for code and data are available in paper

Switched Reluctance Motors (SRMs) are cost-effective electric actuators that utilize magnetic reluctance to generate torque, with torque ripple arising from unaccounted manufacturing defects in the rotor tooth geometry. This paper aims to design a versatile, resource-efficient commutation function for accurate control of a range of SRMs, mitigating torque ripple despite manufacturing variations across SRMs and individual rotor teeth. The developed commutation function optimally distributes current between coils by leveraging the variance in the torque-current-angle model and is designed with few parameters for easy integration on affordable hardware. Monte Carlo simulations and experimental results show a tracking error reduction of up to 31% and 11%, respectively. The developed approach is beneficial for applications using a single driver for multiple systems and those constrained by memory or modeling effort, providing an economical solution for improved tracking performance and reduced acoustic noise., Comment: 6 pages, 7 figures. Final version

Ensuring stability of discrete-time (DT) linear parameter-varying (LPV) input-output (IO) models estimated via system identification methods is a challenging problem as known stability constraints can only be numerically verified, e.g., through solving Linear Matrix Inequalities. In this paper, an unconstrained DT-LPV-IO parameterization is developed which gives a stable model for any choice of model parameters. To achieve this, it is shown that all quadratically stable DT-LPV-IO models can be generated by a mapping of transformed coefficient functions that are constrained to the unit ball, i.e., a small-gain condition. The unit ball is then reparameterized through a Cayley transformation, resulting in an unconstrained parameterization of all quadratically stable DT-LPV-IO models. As a special case, an unconstrained parameterization of all stable DT linear time-invariant transfer functions is obtained. Identification using the stable DT-LPV-IO model with neural network coefficient functions is demonstrated on a simulation example of a position-varying mass-damper-spring system., Comment: Accepted for presentation at the European Control Conference, Stockholm, 2024

When identifying electrical, mechanical, or biological systems, parametric continuous-time identification methods can lead to interpretable and parsimonious models when the model structure aligns with the physical properties of the system. Traditional linear system identification may not consider the most parsimonious model when relying solely on unfactored transfer functions, which typically result from standard direct approaches. This paper presents a novel identification method that delivers additive models for both open and closed-loop setups. The estimators that are derived are shown to be generically consistent, and can admit the identification of marginally stable additive systems. Numerical simulations show the efficacy of the proposed approach, and its performance in identifying a modal representation of a flexible beam is verified using experimental data., Comment: 14 pages, 6 figures

A direct data-driven iterative algorithm is developed to accurately estimate the $H_\infty$ norm of a linear time-invariant system from continuous operation, i.e., without resetting the system. The main technical step involves a reversed-circulant matrix that can be evaluated in a model-free setting by performing experiments on the real system., Comment: 7 pages, 4 figures

Distributionally robust optimization (DRO) incorporates robustness against uncertainty in the specification of probabilistic models. This paper focuses on mitigating the curse of dimensionality in data-driven DRO problems with optimal transport ambiguity sets. By exploiting independence across lower-dimensional components of the uncertainty, we construct structured ambiguity sets that exhibit a faster shrinkage as the number of collected samples increases. This narrows down the plausible models of the data-generating distribution and mitigates the conservativeness that the decisions of DRO problems over such ambiguity sets may face. We establish statistical guarantees for these structured ambiguity sets and provide dual reformulations of their associated DRO problems for a wide range of objective functions. The benefits of the approach are demonstrated in a numerical example.

Switched Reluctance Motors (SRMs) enable power-efficient actuation with mechanically simple designs. This paper aims to identify the nonlinear relationship between torque, rotor angle, and currents, to design commutation functions that minimize torque ripple in SRMs. This is achieved by conducting specific closed-loop experiments using purposely imperfect commutation functions and identifying the nonlinear dynamics via Bayesian estimation. A simulation example shows that the presented method is robust to position-dependent disturbances, and experiments suggest that the identification method enables the design of commutation functions that significantly increase performance. The developed approach enables accurate identification of the torque-current-angle relationship in SRMs, without the need for torque sensors, an accurate linear model, or an accurate model of position-dependent disturbances, making it easy to implement in production., Comment: 6 pages, 6 figures

The performance of a feedforward controller is primarily determined by the extent to which it can capture the relevant dynamics of a system. The aim of this paper is to develop an input-output linear parameter-varying (LPV) feedforward parameterization and a corresponding data-driven estimation method in which the dependency of the coefficients on the scheduling signal are learned by a neural network. The use of a neural network enables the parameterization to compensate a wide class of constant relative degree LPV systems. Efficient optimization of the neural-network-based controller is achieved through a Levenberg-Marquardt approach with analytic gradients and a pseudolinear approach generalizing Sanathanan-Koerner to the LPV case. The performance of the developed feedforward learning method is validated in a simulation study of an LPV system showing excellent performance., Comment: Final author version, accepted for publication at 62nd IEEE Conference on Decision and Control, Singapore, 2023

Fast-sampled models are essential for control design, e.g., to address intersample behavior. The aim of this paper is to develop a non-parametric identification technique for fast-sampled models of systems that have relevant dynamics and actuation above the Nyquist frequency of the sensor, such as vision-in-the-loop systems. The developed method assumes smoothness of the frequency response function, which allows to disentangle aliased components through local models over multiple frequency bands. The method identifies fast-sampled models of slowly-sampled systems accurately in a single identification experiment. Finally, an experimental example demonstrates the effectiveness of the technique.

The performance of fault detection filters relies on a high sensitivity to faults and a low sensitivity to disturbances. The aim of this paper is to develop an approach to directly shape these sensitivities, expressed in terms of minimum and maximum singular values. The developed method offers an alternative solution to the $\mathcal{H}_{-}/\mathcal{H}_{\infty}$ synthesis problem, building upon traditional multiobjective synthesis results. The result is an optimal filter synthesized via iterative convex optimization and the approach is particularly useful for fault diagnosis as illustrated by a numerical example.

Control applications are increasingly sampled non-equidistantly in time, including in motion control, networked control, resource-aware control, and event-triggered control. Some of these applications use measurement devices that sample equidistantly in the amplitude domain. The aim of this paper is to develop a non-parametric estimator of the impulse response of continuous-time systems based on such sampling strategy, known as Lebesgue-sampling. To this end, kernel methods are developed to formulate an algorithm that adequately takes into account the output intersample behavior, which ultimately leads to more accurate models and more efficient output sampling compared to the standard approach. The efficacy of this method is demonstrated through a mass-spring damper case study., Comment: 6 pages, 3 figures. arXiv admin note: substantial text overlap with arXiv:2303.06045

Sensors in high-precision mechatronic systems require accurate calibration, which is achieved using test beds that, in turn, require even more accurate calibration. The aim of this paper is to develop a cascaded calibration method for position sensors of mechatronic systems while taking into account the variance of the calibration model of the test bed. The developed calibration method employs Gaussian Process regression to obtain a model of the position-dependent sensor inaccuracies by combining prior knowledge of the sensor with data using Bayesian inference. Monte Carlo simulations show that the developed calibration approach leads to significantly higher calibration accuracy when compared to alternative regression techniques, especially when the number of available calibration points is limited. The results indicate that more accurate calibration of position sensors is possible with fewer resources., Comment: 6 pages, accepted for 22nd IFAC World Congress

Tracking performance of physical-model-based feedforward control for interventional X-ray systems is limited by hard-to-model parasitic nonlinear dynamics, such as cable forces and nonlinear friction. In this paper, these nonlinear dynamics are compensated using a physics-guided neural network (PGNN), consisting of a physical model, embedding prior knowledge of the dynamics, in parallel with a neural network to learn hard-to-model dynamics. To ensure that the neural network learns only unmodelled effects, the neural network output in the subspace spanned by the physical model is regularized via an orthogonal projection-based approach, resulting in complementary physical model and neural network contributions. The PGNN feedforward controller reduces the tracking error of an interventional X-ray system by a factor of 5 compared to an optimally tuned physical model, successfully compensating the unmodeled parasitic dynamics., Comment: Included conference information in banner of paper

The increasing demands for motion control result in a situation where Linear Parameter-Varying (LPV) dynamics have to be taken into account. Inverse-model feedforward control for LPV motion systems is challenging, since the inverse of an LPV system is often dynamically dependent on the scheduling sequence. The aim of this paper is to develop an identification approach that directly identifies dynamically scheduled feedforward controllers for LPV motion systems from data. In this paper, the feedforward controller is parameterized in basis functions, similar to, e.g., mass-acceleration feedforward, and is identified by a kernel-based approach such that the parameter dependency for LPV motion systems is addressed. The resulting feedforward includes dynamic dependence and is learned accurately. The developed framework is validated on an example., Comment: Final author version

Sampling in control applications is increasingly done non-equidistantly in time. This includes applications in motion control, networked control, resource-aware control, and event-based control. Some of these applications, like the ones where displacement is tracked using incremental encoders, are driven by signals that are only measured when their values cross fixed thresholds in the amplitude domain. This paper introduces a non-parametric estimator of the impulse response and transfer function of continuous-time systems based on such amplitude-equidistant sampling strategy, known as Lebesgue sampling. To this end, kernel methods are developed to formulate an algorithm that adequately takes into account the bounded output uncertainty between the event timestamps, which ultimately leads to more accurate models and more efficient output sampling compared to the equidistantly-sampled kernel-based approach. The efficacy of our proposed method is demonstrated through a mass-spring damper example with encoder measurements and extensive Monte Carlo simulation studies on system benchmarks., Comment: 16 pages, 8 figures

Feedforward for motion systems is getting increasingly more important to achieve performance requirements. This leads to a situation where position-dependent effects cannot be neglected anymore., Comment: 3 page abstract; to appear in euspen Special Interest Group Meeting on Precision Motion Systems & Control

Unknown nonlinear dynamics often limit the tracking performance of feedforward control. The aim of this paper is to develop a feedforward control framework that can compensate these unknown nonlinear dynamics using universal function approximators. The feedforward controller is parametrized as a parallel combination of a physics-based model and a neural network, where both share the same linear autoregressive (AR) dynamics. This parametrization allows for efficient output-error optimization through Sanathanan-Koerner (SK) iterations. Within each SK-iteration, the output of the neural network is penalized in the subspace of the physics-based model through orthogonal projection-based regularization, such that the neural network captures only the unmodelled dynamics, resulting in interpretable models., Comment: Accepted for presentation at the 2022 Conference on Decision and Control (CDC)

Advanced feedforward control methods enable mechatronic systems to perform varying motion tasks with extreme accuracy and throughput. The aim of this paper is to develop a data-driven feedforward controller that addresses input nonlinearities, which are common in typical applications such as semiconductor back-end equipment. The developed method consists of parametric inverse-model feedforward that is optimized for tracking error reduction by exploiting ideas from iterative learning control. Results on a simulated set-up indicate improved performance over existing identification methods for systems with nonlinearities at the input., Comment: 6 pages, 8 figures, to be presented at Modeling Estimation and Control Conference 2022 in Jersey City, NJ, to be published in IFAC-PapersOnLine

Switched reluctance motors are appealing because they are inexpensive in both construction and maintenance. The aim of this paper is to develop a commutation function that linearizes the nonlinear motor dynamics in such a way that the torque ripple is reduced. To this end, a convex optimization problem is posed that directly penalizes torque ripple in between samples, as well as power consumption, and Gaussian Process regression is used to obtain a continuous commutation function. The resulting function is fundamentally different from conventional commutation functions, and closed-loop simulations show significant reduction of the error. The results offer a new perspective on suitable commutation functions for accurate control of reluctance motors., Comment: 6 pages, 11 figures

Direct data-driven control has attracted substantial interest since it enables optimization-based control without the need for a parametric model. This paper presents a new Instrumental Variable~(IV) approach to Data-enabled Predictive Control (DeePC) that results in favorable noise mitigation properties, and demonstrates the direct equivalence between DeePC and Subspace Predictive Control (SPC). The methodology relies on the derivation of the characteristic equation in DeePC along the lines of subspace identification algorithms. A particular choice of IVs is presented that is uncorrelated with future noise, but at the same time highly correlated with the data matrix. A simulation study demonstrates the improved performance of the proposed algorithm in the presence of process and measurement noise., Comment: paper submitted to the CDC

Cross-coupled iterative learning control (ILC) can achieve high performance for manufacturing applications in which tracking a contour is essential for the quality of a product. The aim of this paper is to develop a framework for norm-optimal cross-coupled ILC that enables the use of exact contour errors that are calculated offline, and iteration- and time-varying weights. Conditions for the monotonic convergence of this iteration-varying ILC algorithm are developed. In addition, a resource-efficient implementation is proposed in which the ILC update law is reframed as a linear quadratic tracking problem, reducing the computational load significantly. The approach is illustrated on a simulation example., Comment: To appear in Conference on Decision and Control 2022

Parameterized feedforward control is at the basis of many successful control applications with varying references. The aim of this paper is to develop an efficient data-driven approach to learn the feedforward parameters for MIMO systems. To this end, a cost criterion is minimized using a stochastic gradient descent algorithm, in which both the search direction and step size are determined through system experiments. In particular, the search direction is chosen as an unbiased estimate of the gradient which is obtained from a single experiment, regardless of the size of the MIMO system. The approach is illustrated using a simulation example, in which it is shown to be superior to a deterministic method in terms of convergence speed and thus experimental cost., Comment: To appear in Modeling, Estimation and Control Conference (MECC) 2022

Frequency-domain representations of multirate systems are essential for controller design and performance evaluation of multirate systems and sampled-data control. The aim of this paper is to develop a time-efficient closed-loop identification approach for multirate systems in the frequency-domain. The developed method utilizes local polynomial modeling for lifted representations of LPTV systems, which enables direct identification of closed-loop multirate systems in a single identification experiment. Unlike LTI identification techniques, the developed method does not suffer from bias due to ignored LPTV dynamics. The developed approach is demonstrated on a multirate example, resulting in accurate and fast identification in the frequency domain., Comment: To appear in IEEE 61st Conference on Decision and Control, Cancun, Mexico, 2022, uploaded to arXiv 31-08-2022

An increasing trend in the use of neural networks in control systems is being observed. The aim of this paper is to reveal that the straightforward application of learning neural network feedforward controllers with closed-loop data may introduce parameter inconsistency that degrades control performance, and to provide a solution. The proposed method employs instrumental variables to ensure consistent parameter estimates. A nonlinear system example reveals that the developed instrumental variable neural network (IVNN) approach asymptotically recovers the optimal solution, while pre-existing approaches are shown to lead to inconsistent estimates.

Mechatronic systems have increasingly high performance requirements for motion control. The low-frequency contribution of the flexible dynamics, i.e. the compliance, should be compensated for by means of snap feedforward to achieve high accuracy. Position-dependent compliance, which often occurs in motion systems, requires the snap feedforward parameter to be modeled as a function of position. Position-dependent compliance is compensated for by using a Gaussian process to model the snap feedforward parameter as a continuous function of position. A simulation of a flexible beam shows that a significant performance increase is achieved when using the Gaussian process snap feedforward parameter to compensate for position-dependent compliance., Comment: To appear in: 2022 IEEE American Control Conference. arXiv admin note: text overlap with arXiv:2201.07511

Mechatronic systems have increasingly stringent performance requirements for motion control, leading to a situation where many factors, such as position-dependency, cannot be neglected in feedforward control. The aim of this paper is to compensate for position-dependent effects by modeling feedforward parameters as a function of position. A framework to model and identify feedforward parameters as a continuous function of position is developed by combining Gaussian processes and feedforward parameter learning techniques. The framework results in a fully data-driven approach, which can be readily implemented for industrial control applications. The framework is experimentally validated and shows a significant performance increase on a commercial wire bonder., Comment: in IEEE 17th International Conference on Advanced Motion Control, Padova, Italy, 2022

Linearising the dynamics of nonlinear mechanical systems is an important and open research area. In this paper, we adopt a data-driven and feedback control approach to tackle this problem. A model predictive control architecture is developed that builds upon data-driven dynamic models obtained using nonlinear system identification. The overall methodology shows a high degree of performance combined with significant robustness against imperfect modelling and extrapolation. These findings are demonstrated using large set of synthetic experiments conducted on a asymmetric Duffing oscillator and using an experimental prototype of a high-precision motion system.

Unknown nonlinear dynamics can limit the performance of model-based feedforward control. The aim of this paper is to develop a feedforward control framework for systems with unknown, typically nonlinear, dynamics. To address the unknown dynamics, a physics-based feedforward model is complemented by a neural network. The neural network output in the subspace of the model is penalized through orthogonal projection. This results in uniquely identifiable model coefficients, enabling both increased performance and good generalization. The feedforward control framework is validated on a representative system with performance limiting nonlinear friction characteristics., Comment: Submitted for presentation at the 2022 American Control Conference (ACC)

Feedforward control is essential to achieving good tracking performance in positioning systems. The aim of this paper is to develop an identification strategy for inverse models of systems with nonlinear dynamics of unknown structure using input-output data, which directly delivers feedforward signals for a-priori unknown tasks. To this end, inverse systems are regarded as noncausal nonlinear finite impulse response (NFIR) systems and modeled as a Gaussian Process with a stationary kernel function that imposes properties such as smoothness and periodicity. The approach is validated experimentally on a consumer printer with friction and shown to lead to improved tracking performance with respect to linear feedforward., Comment: 7 pages, 9 figures

The performance increase up to the sensor resolution in repetitive control (RC) invalidates the standard assumption in RC that data is available at equidistant time instances, e.g., in systems with package loss or when exploiting timestamped data from optical encoders. The aim of this paper is to develop an intermittent sampling RC framework for non-equidistant measurements. Sufficient stability conditions are derived that can be verified using non-parametric frequency response function data. This results in a frequency domain design procedure to explicitly address uncertainty. The RC framework is validated on an industrial printbelt setup for which exact non-equidistant measurement data is available., Comment: Accepted for presentation at the 60th Conference on Decision and Control 2021 (CDC2021)

Data-driven iterative learning control can achieve high performance for systems performing repeating tasks without the need for modeling. The aim of this paper is to develop a fast data-driven method for iterative learning control that is suitable for massive MIMO systems through the use of efficient unbiased gradient estimates. A stochastic conjugate gradient descent algorithm is developed that uses dedicated experiments to determine the conjugate search direction and optimal step size at each iteration. The approach is illustrated on a multivariable example, and it is shown that the method is superior to both the earlier stochastic gradient descent and deterministic conjugate gradient descent methods., Comment: 6 pages, 4 figures, 60th IEEE Conference on Decision and Control 2021

Control of systems with operating condition-dependent dynamics, including control moment gyroscopes, often requires operating condition-dependent controllers to achieve high control performance. The aim of this paper is to develop a frequency response data-driven linear parameter-varying control design approach for single-input single-output systems, which allows improved performance for a control moment gyroscope. A stability theory using closed-loop frequency response function data is developed, which is subsequently used in a synthesis procedure that guarantees local stability and performance. Experimental results on a control moment gyroscope demonstrate the performance improvements., Comment: 8 pages, 11 figures, submitted to Transactions on Control Systems Technology. arXiv admin note: substantial text overlap with arXiv:2107.09712

Output reference tracking can be improved by iteratively learning from past data to inform the design of feedforward control inputs for subsequent tracking attempts. This process is called iterative learning control (ILC). This article develops a method to apply ILC to systems with nonlinear discrete-time dynamical models with unstable inverses (i.e. discrete-time nonlinear non-minimum phase models). This class of systems includes piezoactuators, electric power converters, and manipulators with flexible links, which may be found in nanopositioning stages, rolling mills, and robotic arms, respectively. As these devices may be required to execute fine transient reference tracking tasks repetitively in contexts such as manufacturing, they may benefit from ILC. Specifically, this article facilitates ILC of such systems by presenting a new ILC synthesis framework that allows combination of the principles of Newton's root finding algorithm with stable inversion, a technique for generating stable trajectories from unstable models. The new framework, called Invert-Linearize ILC (ILILC), is validated in simulation on a cart-and-pendulum system with model error, process noise, and measurement noise. Where preexisting Newton-based ILC diverges, ILILC with stable inversion converges, and does so in less than one third the number of trials necessary for the convergence of a gradient-descent-based ILC technique used as a benchmark., Comment: International Journal of Robust and Nonlinear Control (2021)

Synthesizing controllers directly from frequency-domain measurement data is a powerful tool in the linear time-invariant framework. Ever-increasing performance requirements necessitate extending these approaches to account for plant variations. The aim of this paper is to develop frequency-domain analysis and synthesis conditions for local internal stability and $\mathcal{H}_\infty$-performance of single-input single-output linear parameter-varying systems. The developed synthesis procedure only requires frequency-domain measurement data of the system and does not need a parametric model of the plant. The capabilities of the synthesis procedure are demonstrated on an unstable nonlinear system., Comment: 8 pages, 8 figures, submitted in Proceedings of the 4th IFAC workshop on Linear Parameter-Varying Systems, 2021