Search

Aim: The purpose of this work was to develop and validate a rapid and robust LC–MS/MS method for the determination of dexmedetomidine (DEX) in plasma, suitable for analysis of a large number of samples. Method: Systematic approach, Design of Experiments, was applied to optimize ESI source parameters and to evaluate method robustness, therefore, a rapid, stable and cost-effective assay was developed. The method was validated according to US FDA guidelines. LLOQ was determined at 5 pg/ml. The assay was linear over the examined concentration range (5–2500 pg/ml), Results: Experimental design approach was applied for optimization of ESI source parameters and evaluation of method robustness. The method was validated according to the US FDA guidelines. LLOQ was determined at 5 pg/ml. The assay was linear over the examined concentration range (R2 > 0.98). The accuracies, intra- and interday precisions were less than 15%. The stability data confirmed reliable behavior of DEX under tested conditions. Conclusion: Application of Design of Experiments approach allowed for fast and efficient analytical method development and validation as well as for reduced usage of chemicals necessary for regular method optimization. The proposed technique was applied to determination of DEX pharmacokinetics in pediatric patients undergoing long-term sedation in the intensive care unit.

The purpose of this study was to assess the pharmacokinetics of dexmedetomidine in the ICU settings during the prolonged infusion and to compare it with the existing literature data using the Bayesian population modeling with literature-based informative priors. Thirty-eight patients were included in the analysis with concentration measurements obtained at two occasions: first from 0 to 24 h after infusion initiation and second from 0 to 8 h after infusion end. Data analysis was conducted using WinBUGS software. The prior information on dexmedetomidine pharmacokinetics was elicited from the literature study pooling results from a relatively large group of 95 children. A two compartment PK model, with allometrically scaled parameters, maturation of clearance and t-student residual distribution on a log-scale was used to describe the data. The incorporation of time-dependent (different between two occasions) PK parameters improved the model. It was observed that volume of distribution is 1.5-fold higher during the second occasion. There was also an evidence of increased (1.3-fold) clearance for the second occasion with posterior probability equal to 62 %. This work demonstrated the usefulness of Bayesian modeling with informative priors in analyzing pharmacokinetic data and comparing it with existing literature knowledge. Electronic supplementary material The online version of this article (doi:10.1007/s10928-016-9474-0) contains supplementary material, which is available to authorized users.

Fluoroquinolones are the drugs of choice in the prevention of bacterial infections after transrectal ultrasound guided prostate biopsy. In order to improve assessment of antibacterial efficacy in the target tissue a simple, selective, rapid and robust HPLC-ESI-MS/MS method for the determination of levofloxacin and ciprofloxacin concentrations in human prostate bioptates was developed and validated. Preparation procedure for prostate samples (10mg) was carried out using homogenization and filtration steps. Analyses were performed within 3.5min using RP C18 column in the isocratic elution mode with mobile phase composed of a mixture of 0.1% formic acid aqueous solution and 0.1% formic acid methanol solution (v/v; 79:21). The method was linear between 0.3μg/g and 15μg/g for levofloxacin and ciprofloxacin with coefficient of correlation (r) ≥0.999. The limit of detection and the limit of quantification for levofloxacin were 0.06μg/g and 0.2μg/g and for ciprofloxacin were 0.04μg/g and 0.13μg/g, respectively. Average concentrations (±SD) of levofloxacin and ciprofloxacin obtained from patients tissue were 5.4±2.2μg/g and 3.9±1.5μg/g, respectively. Additionally, during validation procedure a novel, experimental design approach was applied for the robustness study. For evaluation of analytical method robustness, Plackett-Burman design was employed and for sample preparation method robustness Fractional Factorial design was used. The developed and validated method was successfully applied to examine prostate tissue samples obtained from patients enrolled into a clinical study. Up to now, there has been no other HPLC-ESI-MS/MS method reported for the simultaneous determination of levofloxacin and ciprofloxacin in human prostatic tissue.

Fluoroquinolones are considered as gold standard for the prevention of bacterial infections after transrectal ultrasound guided prostate biopsy. However, recent studies reported that fluoroquinolone- resistant bacterial strains are responsible for gradually increasing number of infections after transrectal prostate biopsy. In daily clinical practice, antibacterial efficacy is evaluated only in vitro, by measuring the reaction of bacteria with an antimicrobial agent in culture media (i.e. calculation of minimal inhibitory concentration). Such approach, however, has no relation to the treated tissue characteristics and might be highly misleading. Thus, the objective of this study was to develop, with the use of Design of Experiments approach, a reliable, specific and sensitive ultra-high performance liquid chromatography- diode array detection method for the quantitative analysis of levofloxacin in plasma and prostate tissue samples obtained from patients undergoing prostate biopsy. Moreover, correlation study between concentrations observed in plasma samples vs prostatic tissue samples was performed, resulting in better understanding, evaluation and optimization of the fluoroquinolone-based antimicrobial prophylaxis during transrectal ultrasound guided prostate biopsy. Box-Behnken design was employed to optimize chromatographic conditions of the isocratic elution program in order to obtain desirable retention time, peak symmetry and resolution of levofloxacine and ciprofloxacine (internal standard) peaks. Fractional Factorial design 2(4-1) with four center points was used for screening of significant factors affecting levofloxacin extraction from the prostatic tissue. Due to the limited number of tissue samples the prostatic sample preparation procedure was further optimized using Central Composite design. Design of Experiments approach was also utilized for evaluation of parameter robustness. The method was found linear over the range of 0.030-10μg/mL for human plasma and 0.300-30μg/g for human prostate tissue samples. The intra-day and inter-day variability for levofloxacine from both plasma and prostate samples were less than 10%, with accuracies between 93 and 108% of the nominal values. The limit of detection and the limit of quantification for human plasma were 0.01μg/mL and 0.03μg/mL, respectively. For the prostate tissue, the limit of detection and the limit of quantification were 0.1μg/g and 0.3μg/g, respectively. The average recoveries of levofloxacin were in the range from 99 to 106%. Also, the method fulfills requirements of robustness what was determined and proved by Design of Experiments. The developed method was successfully applied to examine prostate tissue and plasma samples from 140 hospitalized patients enrolled into the clinical study, 12h after oral administration of LVF at a dose of 500mg. The mean (±SD) LVF concentration in prostate was 6.22±3.52μg/g and in plasma 2.54±1.14μg/mL. Due to simplicity of the method and relative small amount of sample needed for the assay, the method can be applied in clinical practice for monitoring of LVF concentrations in plasma and prostate gland.

The aim of the study was to develop and validate a simple and rapid method for the determination of cyclosporine A (CsA) in ocular rabbit tissues using reversed-phase ultra-high-performance liquid chromatography (UHPLC) with UV detection. Previous publications on chromatographic methods of CsA determination in ocular tissues involved only reversed-phase HPLC separation, usually in combination with such detection techniques as radio-immunoassay and mass spectrometry. The application of the UHPLC technique allowed us to significantly decrease the analysis time. Cyclosporine D (CsD) was applied as the internal standard. Satisfactory separation was achieved on an XB-C18 Kinetex column at 60°C with the use of gradient elution mode. The retention times of CsA and CsD were found to be 4.5 and 5.1 min, respectively. The developed assay is specific, sensitive (limit of detection = 6 ng/mL and limit of quantitation = 18 ng/mL) and linear within the analyte concentration range of 0.018-5 µg/mL, with a correlation coefficient of 0.999. High sensitivity, low injection volume (10 μL), short time of analysis (6.5 min) and simplicity make this method useful for the fast analysis of CsA in rabbit ocular tissues and fluids: lacrimal fluid, aqueous humor, cornea, conjunctiva and eye globe.