Search

Vinyl esters and carbonates have recently been demonstrated to have considerably lower cytotoxicity than their more commonly used (meth)acrylate counterparts, inspiring their use in the 3D printing of biomaterials. However, the degradation rates of such synthetic photopolymers are slow, especially in the mild conditions present in many biological environments. Some applications, for example, tissue regeneration scaffolds and drug release, require considerably faster biodegradation. Furthermore, it is essential to be able to easily tune the degradation rate to fit the requirements for a range of applications. Herein we present the design and synthesis of hydrolytically degradable polyphosphazenes substituted with a vinyl carbonate functionalized amino acid. Thiolene copolymerization with vinyl esters gave cured polymers which are demonstrated to considerably accelerate the degradation rates of cured vinylester/thiolene polymer scaffolds. Graphical abstract

Photochemical additive manufacturing technologies can produce complex geometries in short production times and thus have considerable potential as a tool to fabricate medical devices such as individualised patient-specific implants, prosthetics and tissue engineering scaffolds. However, most photopolymer resins degrade only slowly under the mild conditions required for many biomedical applications. Herein we report novel amino acid-based polyphosphorodiamidate (APdA) monomers with hydrolytically cleavable bonds. The substituent on the α-amino acid can be used as a handle for facile control of hydrolysis rates of the monomers into their endogenous components, namely phosphate and the corresponding amino acid. Furthermore, monomer hydrolysis is considerably accelerated at lower pH values. The monomers underwent thiol-yne photopolymerization and could be 3D structured via multi-photon lithography. Copolymerization with commonly used hydrophobic thiols demonstrates not only their ability to regulate the ambient degradation rate of thiol-yne polyester photopolymer resins but also rare but highly desirable surface erosion behaviour. Such degradation profiles, in the appropriate timeframes in suitably mild conditions, combined with their good cytocompatibility and 3D printability, render these novel photomonomers of significant interest for a wide range of biomaterial applications.

Herein, we report on the mechanochemical reaction of pyrrole and substituted benzaldehyde precursors to produce freebase corroles and demonstrate the one-pot mechanochemical synthesis of 5,10,15-Tris(4-[Formula: see text]-butylphenyl)corrole (H[Formula: see text]-buPhC), in which both, the condensation and oxidation reactions steps, took place in the ball mill. Moreover, we could achieve the mechanochemical synthesis of copper corroles with decent overall yields of 10–12%. With the mechanochemical approach we could shift the EcoScale obtained from common synthesis procedures to significant more positive values and the E-factor for the mechanochemical copper insertion was lowered by factor of 3.0.

Strategies for production and use of nanomaterials have rapidly moved towards safety and sustainability. Beyond these requirements, the novel routes must prove to be able to preserve and even improve the performance of the resulting nanomaterials. Increasing demand of high-performance nanomaterials is mostly related to electronic components, solar energy harvesting devices, pharmaceutical industries, biosensors, and photocatalysis. Among nanomaterials, Zinc oxide (ZnO) is of special interest, mainly due to its environmental compatibility and vast myriad of possibilities related to the tuning and the enhancement of ZnO properties. Doping plays a crucial role in this scenario. In this work we report and discuss the properties of undoped ZnO as well as lanthanide (Eu, Tb, and La)-doped ZnO nanoparticles obtained by using whey, a by-product of milk processing, as a chelating agent, without using citrate nor any other chelators. The route showed to be very effective and feasible for the affordable large-scale production of both pristine and doped ZnO nanoparticles in powder form.

This work reports a reversible braking system for micromotors that can be controlled by small temperature changes (≈5 °C). To achieve this, gated‐mesoporous organosilica microparticles are internally loaded with metal catalysts (to form the motor) and the exterior (partially) grafted with thermosensitive bottle‐brush polyphosphazenes to form Janus particles. When placed in an aqueous solution of H2O2 (the fuel), rapid forward propulsion of the motors ensues due to decomposition of the fuel. Conformational changes of the polymers at defined temperatures regulate the bubble formation rate and thus act as brakes with considerable deceleration/acceleration observed. As the components can be easily varied, this represents a versatile, modular platform for the exogenous velocity control of micromotors., A robust and easily tunable micromotor platform is reported, based on Janus gated‐mesoporous organosilica microparticles with reversible, external responsive braking systems using bottle‐brush polyphosphazenes to control acceleration/deceleration by small changes in temperature.

It is common knowledge that molecular energy level offsets of a type II heterojunction formed at the donor–acceptor interface are considered to be the driving force for photoinduced charge transfer in organic solar cells. Usually, these offsets – present between molecular energy levels of the donor and acceptor – are obtained via cyclic voltammetry (CV) measurements of organic semiconductors cast in a film or dissolved in solution. Simply transferring such determined energy levels from solution or film of single materials to blend films may be obviously limited and not be possible in full generality. Herein, we report various cases of material combinations in which novel non-fullerene acceptors did not yield successful charge transfer, although energy levels obtained by CV on constituting single materials indicate a type II heterojunction. Whilst the integer charge transfer (ICT) model provides one explanation for a relative rise of molecular energy levels of acceptors, further details and other cases have not been studied so far in great detail. By applying energy-resolved electrochemical impedance spectroscopy (ER-EIS) on several donor–acceptor combinations, a Fano-like resonance feature associated with a distinctive molecular energy level of the acceptor as well as various relative molecular energy level shifts of different kinds could be observed. By analyzing ER-EIS and absorption spectra, not only the exciton binding energy within single materials could be determined, but also the commonly unknown binding energy of the CT state with regard to the joint density of states (jDOS) of the effective semiconductor. The latter is defined by transitions between the highest occupied molecular orbitals (HOMO) of the donor and the lowest unoccupied molecular orbitals (LUMO) of the acceptor. Using this technique among others, we identified cases in which charge generation may occur either via uphill or by downhill processes between the charge transfer exciton and the electronic gap of the effective semiconductor. Exceptionally high CT-exciton binding energies and thus low charge generation yields were obtained for a case in which the donor and acceptor yielded a too intimate blend morphology, indicating π–π stacking as a potential cause for unfavorable molecular energy level alignment.

The ability to prepare block, multiblock and segmented polymers is an essential and established tool in polymer chemistry to tailor the properties of materials and steer the formation of complex nanostructures. The preparation of segmented or block copolymers with pre-defined block lengths is, however, inherently difficult for polyimides, one of the most important and versatile high-performance polymers. The most accessible route to polyimides, a step-growth polyamic acid formation between diamines and dianhydrides, is in dynamic equilibrium, which leads to chain scrambling of attempted block copolymers. We provide herein a solution to this by utilizing a Diels–Alder reaction on phenylethynyl end-functionalized oligomers containing pre-formed, ring-closed imides. The reaction of the alkynes with a bistetraphenylcyclopentadienone chain extender undergoes a chelotropic evolution of CO gas at high temperatures forming phenylene segments and polymerizing the chains in the process. Furthermore, we could use this reaction for the chain extension of different phenylethynyl functionalized telechelic oligoimides and thus produce random multiblock copolymers. Importantly the reaction is also demonstrated to enable chain extension reactions with insoluble oligoimides, considerably expanding the scope of potential as many important polyimides are either insoluble, or poorly soluble, in common organic solvents. This Diels–Alder polymerization is thus demonstrated to be a highly versatile route to prepare novel polyimides with wide-ranging possibilities and considerable potential to prepare advanced materials ranging from electronic applications to high-performance materials.

This work reports on an optimized procedure to synthesize methylammonium bromide perovskite nanoparticles. The ligand-assisted precipitation synthetic pathway for preparing nanoparticles is a cost-effective and promising method due to its ease of scalability, affordable equipment requirements and convenient operational temperatures. Nevertheless, there are several parameters that influence the resulting optical properties of the final nanomaterials. Here, the influence of the choice of solvent system, capping agents, temperature during precipitation and ratios of precursor chemicals is described, among other factors. Moreover, the colloidal stability and stability of the precursor solution is studied. All of the above-mentioned parameters were observed to strongly affect the resulting optical properties of the colloidal solutions. Various solvents, dispersion media, and selection of capping agents affected the formation of the perovskite structure, and thus qualitative and quantitative optimization of the synthetic procedure conditions resulted in nanoparticles of different dimensions and optical properties. The emission maxima of the nanoparticles were in the 508–519 nm range due to quantum confinement, as confirmed by transmission electron microscopy. This detailed study allows the selection of the best optimal conditions when using the ligand-assisted precipitation method as a powerful tool to fine-tune nanostructured perovskite features targeted for specific applications.

Here, a simple method for controlling the size of the perovskite nanoparticles (PNPs) during preparation is reported. Metal halide PNPs have great potential for application in optoelectronic device...

Photon cooling via anti-Stokes photoluminescence (ASPL) is a promising approach to realize all-solid-state cryo-refrigeration by photoexcitation. Photoluminescence quantum yields close to 100% and a strong coupling between phonons and excited states are required to achieve net cooling. We have studied the anti-Stokes photoluminescence of thin films of methylammonium lead bromide nanoparticles. We found that the anti-Stokes photoluminescence is thermally activated with an activation energy of ∼80 meV. At room temperature the ASPL up-conversion efficiency is ∼60% and it depends linearly on the excitation intensity. Our results suggest that upon further optimization of their optical properties, the investigated particles could be promising candidates for the demonstration of photon cooling in thin solid films.

Despite the current advancements, yet improving the intrinsic structure and external environmental stability of hybrid metal halide perovskite nanomaterials is required for developing efficient perovskite-based devices. Up-to-date, a very attractive method is growing and/or embedding perovskite nanocrystals within organic polymeric matrices, or into porous inorganic and hybrid nano/micromaterials (e. g., metal-organic frameworks, mesoporous silica, zeolites, and others), favored through confinement effect within the pores. In this review, we highlighted the last two years of research progress on enhancing the stabilization of perovskite nanoparticles based on methylammonium cations. In the future generation of optoelectronic and photovoltaic devices along with other interesting applied fields, it is predicted that an effective way to trigger the widespread use of this type of perovskite nanocrystals may involve combining different functional host materials, acting as a smarter protection method for the guest nanocrystals.

A water-soluble hydrolysate of silk fibroin (SF) (~30 kDa) was esterified with tocopherol, ergocalciferol, and testosterone to form SF aggregates for the controlled delivery of the anticancer drug camptothecin (CPT). Elemental analysis and 1H NMR spectroscopy showed a degree of substitution (DS) on SF of 0.4 to 3.8 mol %. Yields of 58 to 71% on vitamins- and testosterone-grafted SF conjugates were achieved. CPT was efficiently incorporated into the lipophilic core of SF aggregates using a dialysis–precipitation method, achieving drug contents of 6.3–8.5 wt %. FTIR spectra and DSC thermograms showed that tocopherol- and testosterone-grafted SF conjugates predominantly adopted a β-sheet conformation. After the esterification of tyrosine residues on SF chains with the vitamin or testosterone, the hydrodynamic diameters almost doubled or tripled that of SF. The zeta potential values after esterification increased to about −30 mV, which favors the stability of aggregates in aqueous medium. Controlled and almost quantitative release of CPT was achieved after 6 days in PBS at 37 °C, with almost linear release during the first 8 h. MCF-7 cancer cells exhibited good uptake of CPT-loaded SF aggregates after 6 h, causing cell death and cell cycle arrest in the G2/M phase. Substantial uptake of the CPT-loaded aggregates into MCF-7 spheroids was shown after 3 days. Furthermore, all CPT-loaded SF aggregates demonstrated superior toxicity to MCF-7 spheroids compared with parent CPT. Blank SF aggregates induced no hemolysis at pH 6.2 and 7.4, while CPT-loaded SF aggregates provoked hemolysis at pH 6.2 but not at pH 7.4. In contrast, parent CPT caused hemolysis at both pH tested. Therefore, CPT-loaded SF aggregates are promising candidates for chemotherapy.

The design and study of efficient polymer-based drug delivery systems for the controlled release of anticancer drugs is one of the pillars of nanomedicine. The fight against metastatic and invasive cancers demands therapeutic candidates with increased and selective toxicity towards malignant cells, long-term activity and reduced side effects. In this sense, polyphosphazene nanocarriers were synthesized for the sustained release of the anticancer drugs camptothecin (CPT) and epirubicin (EPI). Linear poly(dichloro)phosphazene was modified with lipophilic tocopherol or testosterone glycinate, with antioxidant and antitumor activity, and with hydrophilic Jeffamine M1000 to obtain different polyphosphazene nanocarriers. It allowed us to encapsulate the lipophilic CPT and the more hydrophilic EPI. The encapsulation process was carried out via solvent exchange/precipitation, attaining a 9.2–13.6 wt% of CPT and 0.3–2.4 wt% of EPI. CPT-loaded polyphosphazenes formed 140–200 nm aggregates in simulated body physiological conditions (PBS, pH 7.4), resulting in an 80–100-fold increase of CPT solubility. EPI-loaded polyphosphazenes formed 250 nm aggregates in an aqueous medium. CPT and EPI release (PBS, pH 7.4, 37 °C) was monitored for 202 h, being almost linear during the first 8 h. The slow release of testosterone and tocopherol was also sustained for 150 h in PBS (pH 7.4 and 6.0) at 37 °C. The co-delivery of testosterone or tocopherol and the anticancer drugs from the nanocarriers was expected. Cells of the human breast cancer cell line MCF-7 demonstrated good uptake of anticancer-drug-loaded nanocarriers after 6 h. Similarly, MCF-7 spheroids showed good uptake of the anticancer-drug-loaded aggregates after 72 h. Almost all anticancer-drug-loaded polyphosphazenes exhibited similar or superior toxicity against MCF-7 cells and spheroids when compared to raw anticancer drugs. Additionally, cell-cycle arrest in the G2/M phase was increased in response to the drug-loaded nanocarriers. Almost no toxicity of anticancer-drug-loaded aggregates against primary human lung fibroblasts was observed. Furthermore, the aggregates displayed no hemolytic activity, which is in contrast to the parent anticancer drugs. Consequently, synthesized polyphosphazene-based nanocarriers might be potential nanomedicines for chemotherapy.

Steroid-grafted silk fibroin (SF) conjugates with a degree of substitution of 1.1–4.3 mol% were efficiently synthesised for controlled release of anticancer drug diosgenin and agrochemicals DI31 and S7. The esterification of tyrosine residues in SF conjugates was confirmed using elemental analysis, ATR-FTIR and 1H NMR spectroscopies. The thermal properties of SF conjugates analysed using DSC and TGA confirmed the ATR-FTIR findings on SF conjugates that β-sheet conformation was the predominant one in solid state. DLS revealed the impact of hydrophobic modification of SF on its hydrodynamic parameters, which resulted in more than doubled hydrodynamic sizes and zeta potential values. SF conjugates were observed as 250–600 nm aggregates formed by nanoparticles of 25–41 nm, as depicted using TEM and AFM. Controlled release of 40–50% grafted steroids from SF conjugates at pH 6.0 was achieved after 5 days. Agrochemical-grafted SF conjugates showed better plant growth enhancing effect than parent DI31 and S7 when evaluated on radish plants. SF conjugates showed low cytotoxicity at concentrations below 0.025 mg/mL when applied on MCF-7 and HEK-293 cells. Due to these results, we envisage that the synthesised DI31- and S7-grafted SF conjugates are good candidates for agrochemical use. This work also contributes to progress the use of silk fibroin in sustainable agriculture.

Versatile approaches to nanoparticle synthesis offer unprecedented opportunities for the development of optoelectronics, photonics, and biosciences. With the current advancement of hybrid organic–i...

An approach to reduce cycle times in injection molding of poly (lactic acid) through the use of bio-based nucleating agents is presented. Talc is commonly used as nucleant and will be used as the reference in this study. The other investigated additives are kraft lignin, lignosulfonate, and carbon black. This is an in-depth study of certain bio-based nucleating agents for use with poly (lactic acid) under various processing conditions. Bio-based compounds of poly (lactic acid) and different nucleating agents were produced via twin-screw extrusion. Subsequent injection molding yielded standard samples for tensile testing; cycle times were recorded during injection molding. Thermal and mechanical testing showed direct dependence upon the degree of crystallinity in the matrix polymer. The ability of certain bio-based nucleating agents (e.g. kraft lignin) to reduce the cycle time in injection molding was proven.

Thermoplastic materials used in coatings, paints and adhesives as well as structural applications for sensitive substrates, such as wood, paper or polymers, often lack the required chemical and environmental resistance for many applications, which can be overcome by covalent cross-linking. Covalent cross-linking improves chemical and mechanical properties of the material and has been used for many different materials and applications. Room temperature cross-linking can be initiated by different mechanisms and eliminates energy intensive heating as well as conditions potentially harmful for the substrate. The present article focuses on cross-linking strategies applied for different materials, such as thermoplastics and thermosets. It is organized by material class, followed by an overview about triggering mechanisms for cross-linking reactions at room temperature. The authors hope to provide helpful insights about the methods for covalent cross-linking already published.

A switchable silane derived stimuli-responsive bottle-brush polyphosphazene (PPz) was prepared and attached to the surface of mesoporous silica nanoparticles (MSNs). The hybrid polymer with PEG-like Jeffamine® M-2005 side-arms undergo conformational changes in response to both pH and temperature due to its amphiphilic substituents and protonatable main-chain, hence were investigated as a gatekeeper. Safranin O as control fluorophore or the anticancer drug camptothecin (CPT) were encapsulated in the PPz-coated MSNs. At temperatures below the lower critical solution temperature (LCST), the swollen conformation of PPz efficiently blocked the cargo within the pores. However, above the LCST, the PPz collapsed, allowing release of the payload. Additionally, protonation of the polymer backbone at lower pH values was observed to enhance opening of the pores from the surface of the MSNs and therefore the release of the dye.

The present research aims at controlled delivery of anticancer drugs camptothecin and doxorubicin through encapsulation in self-assembled hyaluronic acid (HA)-testosterone conjugates. The conjugates were obtained by functionalization of either natural sodium hyaluronate or hydrazide-modified HA derivatives with testosterone hemisuccinate. From 2.0 to 7.7% of HA disaccharide units were linked to testosterone via two types of linkers of different length. Fourier transform infrared and proton nuclear magnetic resonance spectroscopies confirmed modification of HA. Conjugation of hydrophobic testosterone to hydrophilic backbone of HA resulted in the self-assembly of amphiphilic HA-testosterone conjugates in aqueous medium and the formation of stable and negatively charged nanoparticles with hydrodynamic diameter ranging from 172 to 380 nm and ζ-potential ranging from −37 to −26 mV, as evidenced from dynamic light scattering measurements. Examination of the dried conjugates by transmission electron microscopy revealed almost spherical particles of 50–100 nm size. Entrapment of camptothecin and doxorubicin in the hydrophobic core of HA-testosterone nanoparticles was performed with the drugs content of ca. 2.8 wt% and 3.5 wt% respectively. The sustained release of the anticancer drugs over 96 h was observed in phosphate buffered saline at pH 7.4. Cytotoxicity of camptothecin- and doxorubicin-loaded HA-testosterone nanoparticles against MCF-7 cancer cell line was found to be similar to the cytotoxicity of the free anticancer drugs. Based on the results of the in vitro studies, we can conclude that the developed HA-testosterone nanoparticles are promising candidates in chemotherapy treatments of cancers.

Commercial sodium hyaluronate (HA) and synthetic hydrazide-modified HA were functionalized with diosgenin and two agrochemicals (brassinosteroids DI31 and S7) with degree of substitution ranging from 5.6 to 13.1%. The HA-steroid conjugates were studied with FTIR, 1H NMR and differential scanning calorimetry. Dynamic light scattering revealed self-assembly of the HA-steroid conjugates into stable negatively charged nanoparticles of around 159nm-441nm in water, which after drying appeared as 140nm-370nm spherically shaped nanoparticles according to transmission electron microscopy. These nanoparticles exhibited almost constant release rates of steroids for the first 8h, demonstrating sustained steroids delivery for 72h in acidic medium. The nanoparticles formed from HA-steroid conjugates were not cytotoxic to human microvascular endothelial cells (HMVEC), while the HA- brassinosteroid nanoparticles showed in vitro agrochemical activity that was superior to the activity observed for the parent brassinosteroids DI31 and S7 at 10-5 to 10-7mgmL-1.

The present work focuses on the hydrophobic functionalization of water soluble celluloses methyl cellulose, hydroxyethyl cellulose and (hydroxypropyl)methyl cellulose with the anticancer steroid diosgenin, and two synthetic brassinosteroids (DI31 and S7) used as agrochemicals. Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopies confirmed the cellulose modification. Prepared amphiphilic steroid-cellulose conjugates can self-assemble in water as stable and almost neutral particles with micelle-like structure, as depicted using dynamic light scattering. Whereas scanning and transmission electron microscopies showed 50–300 nm almost spherical particles and aggregates in dried state, atomic force microscopy assessed particles aggregates with mean sizes of 220–355 nm. These cellulose particles showed sustained steroid release in acidic aqueous medium over 72 h, and good stimulatory agrochemical activity in radish cotyledons assay. Thus, the outlined synthesis of steroid-cellulose conjugates, which would be capable to form self-assembled particles in water for controlled release of agrochemicals, is envisioned as a promising strategy.

The synthesis and characterisation of novel polyphosphazene nanocarriers, based on hydrophilic polyalkylene oxide Jeffamine M1000 and hydrophobic steroids with a glycinate linker for pH-controlled release of diosgenin and two brassinosteroids (DI31 and S7) with agrochemical and potential anticancer activity, is hereby described. Polyphosphazenes carrying approximately 17 wt% of DI31 or S7 self-assembled in water to form 120–150 nm nanoaggregates, which showed an excellent plant growth effect on radish cotyledons due to sustained delivery of approximately 30% of the agrochemicals after 4 days. Cytotoxic evaluation showed that all polymers carrying steroids and Jeffamine M1000 resulted in strong to moderate toxicity to MCF-7 cancer cells and were non-toxic to primary human lung fibroblast cells at 0.1 to 0.025 mg mL−1. Thus, DI31 and S7 bearing polymers applied at 10−4 to 10−6 mg mL−1 for delivery of recommended DI31 or S7 quantities to crops should be harmless to humans. Particularly, DI31 and S7 bearing polymers with strong cytotoxicity on MCF-7 and non-toxicity on primary human lung fibroblasts, good cell uptake after 6 hours, proper hydrodynamic sizes between 100 and 200 nm, and slow sustained release of cytotoxic drugs (DI31, S7) in acidic conditions might potentiate their accumulation in cancer tissues with good antitumour effects and minor side effects. These results demonstrated that preparation of brassinosteroid bearing polymers is a promising strategy for the preparation of better agrochemicals with reduced pollutant impact on sustainable agriculture and potential anticancer formulations based on analogues of brassinosteroids.

Combining the unique properties of peptides as versatile tools for nano- and biotechnology with lead halide perovskite nanoparticles can bring exceptional opportunities for the development of optoelectronics, photonics, and bioelectronics. As a first step towards this challenge sub 10 nm methylammonium lead bromide perovskite colloidal nanoparticles have been synthetizes using commercial cyclic peptide Cyclo(RGDFK), containing 5 amino acids, as a surface stabilizer. Perovskite nanoparticles passivated with Cyclo(RGDFK) possess charge transfer from the perovskite core to the peptide shell, resulting in lower photoluminescence quantum yields, which however opens a path for the application where charge transfer is favorable.

In this paper we present the preparation and application of a novel soluble phosphine functionalized polyphosphazene (poly[3-(diphenylphosphino)propylamino]phosphazene) and investigate its application as a polymeric reagent. Upon chlorination of the pendant phosphine groups, the polymer was found to facilitate the rapid and efficient transformation of alcohols to the corresponding chlorides and bromides under Appel-type conditions. Reaction times followed by 31P NMR spectroscopy are shown to be rapid (several minutes) and the yields for the transformation of alcohols to the corresponding halides are in the range 80–99 %. The facile recovery of the oxidized polymeric agent by precipitation is also described, offering a significant advantage over notoriously difficult to remove small molecule phosphine oxide by-products. Furthermore the regeneration of the reactive phosphine chloride pendant groups is demonstrated, which could be efficiently re-used in a further chlorination reaction.

Camptothecin (CPT), a potent anticancer drug with known antiviral activity, is halted of clinical use. Few drug delivery systems of CPT are approved for therapy. Hereby, we propose the encapsulation of hydrophobic CPT in the inner core of cellulose nanoaggregates for sustained release with retaining of antiproliferative activity. Cellulose conjugates were synthesized by esterification of methyl cellulose, hydroxyethyl cellulose and (hydroxypropyl)methyl cellulose with testosterone, ergocalciferol and dl -α-tocopherol hemisuccinates. The degree of substitution attained ranged from 0.004 to 0.025 and no depolymerization was observed by size exclusion chromatography. ATR-FTIR and NMR spectroscopies confirmed grafting of testosterone and vitamins to celluloses. According to dynamic light scattering, it resulted in their self-assembly in aqueous medium as stable and slightly negatively charged nanoaggregates of 213 to 731 nm. Nanoaggregates formation was also assessed using transmission electron and atomic force microscopies. CPT was encapsulated in the cellulose nanoaggregates, achieving a content of 1.7–13.0 wt %. Sustained release of camptothecin over 150 h was observed in simulated physiological conditions. CPT-loaded cellulose nanoparticles appeared to be possible candidates for chemotherapy, according to observed cytotoxicity against MCF-7 cancer cells.

Chitosan microspheres (CS) prepared by water-in-oil emulsion/glutaraldehyde cross-linking-evaporation and simple coacervation/cross-linking with sodium tripolyphosphate were covalently linked to diosgenin hemiesters. The diosgenin content found using elemental analysis was ca. 6 to 42 wt-% and it showed dependence on the type of diosgenin hemiesters and on the method of preparation of the CS microspheres. Fourier transform infrared spectroscopy confirmed the hydrophobic functionalization of CS with the diosgenin hemiesters by amide bond formation. The effect of CS modification with diosgenin on the thermal properties was also studied using differential scanning calorimetry. Microsphere sizes determined using optical microscopy ranged from 60 to 700 um, while scanning electron microscopy depicted morphology dependent on the selected method to obtain CS microspheres. In vitro release studies performed in aqueous medium indicated a drug release dependence on the diosgenin hemiester linkers, the steroid content and the acidity of the solution. Sustained diosgenin release in acidic aqueous solution (pH 6.0) reached from 34 to 81% after 48 h.

Within this work we aimed to improve the pharmacodynamics and toxicity profile of organoruthenium and -rhodium complexes which had previously been found to be highly potent in vitro but showed unselective activity in vivo. Different organometallic complexes were attached to a degradable poly(organo)phosphazene macromolecule, prepared via controlled polymerization techniques. The conjugation to hydrophilic polymers was designed to increase the aqueous solubility of the typically poorly soluble metal-based half-sandwich compounds with the aim of a controlled, pH-triggered release of the active metallodrug. The synthesized conjugates and their characteristics have been thoroughly studied by means of 31P NMR and UV-Vis spectroscopy, ICP-MS analyses and SEC coupled to ICP-MS. In order to assess their potential as possible anticancer drug candidates, the complexes, as well as their respective macromolecular prodrug formulations were tested against three different cancer cell lines in cell culture. Subsequently, the anticancer activity and organ distribution of the poly(organo)phosphazene drug conjugates were explored in vivo in mice bearing CT-26 colon carcinoma. Our investigations revealed a beneficial influence of this macromolecular prodrug by a significant reduction of adverse effects compared to the free metallodrugs.

Two series of water soluble novel conjugates of the photosensitizer hypericin were prepared and evaluated for their use as agents for photodynamic therapy, with covalently and non-covalently loaded hypericin on functionalised, hydrolytically degradable inorganic-organic hybrid polyphosphazenes. The conjugates showed excellent aqueous solubility and similar fluorescence spectra to pristine hypericin. Detailed in vitro investigations revealed that the substances were non-toxic in the dark over a wide concentration range, but displayed phototoxicity upon irradiation. Cell uptake studies showed rapid uptake with localization of hypericin observed in endoplasmic reticulum, Golgi complex and particularly in the lysosomes. Furthermore, a DNA fragmentation assay revealed that the photosensitizer conjugates are efficient inducers of apoptosis with some tumor cell selectivity caused by faster and enhanced accumulation in A431 than in HaCaT cells, and thus a moderately higher phototoxicity of A431 compared to HaCaT cells. These novel photosensitizer conjugates hence represent viable hydrolytically degradable alternatives for the advanced delivery of hypericin.