Search

Nowadays, both in the Russian Federation and in foreign countries, the use of global navigation satellite systems (GNSS) for solving various applied problems is an extremely popular solution. Taking into account the current level of development of satellite radio navigation systems, ordinary users have been able to determine their position with a sufficiently high accuracy. However, some tasks require the use of high-precision equipment of geodetic class. Such equipment allows obtaining navigation solutions with an accuracy of better than 10 cm. Unfortunately, the cost of navigation-class navigation equipment is extremely high. Specialists working in the field of satellite navigation are particularly interested in the possibility of using mass-produced GNSS modules to obtain high-precision navigation solutions. In this paper, the possibility of such an application will be considered, taking into account the results of laboratory tests of a mass-produced navigation module.

For successful implementation of unmanned technologies on water transport, it is proposed to create a specialized test area where autonomus ships and technologies of autonomus navigation could be tested in real conditions. The paper considers the solution of the problem of placement and technical equipment of the test aquatory, provided that risks are minimized, including collision prevention and environmental damage. To select the location of this aquatory, the features of the inland waterways of the European part of the Russian Federation were analyzed and the requirements for this water area were formulated. As a result, two test sites were proposed that allow for all the necessary types of tests of autonomus ships. The paper synthesizes the main parameters, such as the availability of navigation and hydrographic information, electronic cartography, etc. As a result of the study, a site in lake Ladoga was selected. In order to complete the full cycle of necessary measures during the tests and ensure the safety of navigation in a given area, it was decided to design the test aquatory as a set of three maneuvering zones for an unmanned vessel: the safe free maneuvering zone during testing, the turning zone - area of restricted maneuverability on courses and speeds, as well as on the shift of the steering wheel, and the extra safety maneuvering area used to prevent navigation accidents in difficult navigation conditions. The proposed location and concept of the test aquatory fully meet all the requirements for such an innovative infrastructure at the international level.

The paper presents the results of research the new technological process for producing bimetallic materials in the composition of “aluminum cast alloy - sintered iron powder” by the method of joint stamping of liquid metal. The purpose of this research is obtain parts with high wear-resistant properties, special sintered powder materials are used, which have an internal porosity to retain lubricant. However, such materials do not fit well with traditional aluminum alloys. This problem is may be solved by creating new bimetallic alloys, part of which is an outer casing, and the other materials is the functional bearing. To accomplish this task, we conducted a study of a new technology for joint stamping of liquid metal. In order to optimize and increase the reliability of the experiment, the pressing pressure, the pressure holding time, and the tooling temperature of the matrix were taken as quantitative factors. The effect of the applied pressure on the mechanical properties of the base material and the facing layer was determined on a longitudinal section of the obtained samples by the Vickers method. It was revealed that the gradient of increasing hardness is directed to the outer radius of the workpiece, that is, to the opposite crystallization front. The high level of bimetal adhesion is explained by the presence of a uniform moderate zone of mutual solubility, including due to the violation of the porous surface layer of the powder billet.

The features of the BIM model development for marine port facilities operation are discussed. Infrastructure objects differ significantly from linear and area objects, the use of information modeling for transport infrastructure requires a new approach to organization of design, construction and especially for operation. Most seaports were built long ago and there is not to have the project documentation for them. It is therefore very relevant is the problem of adapting existing building and design documentation to develop models of operation. Infrastructure projects always have a large number of interconnections that are irregular and difficult to formalize into an information model. Port berthing facilities in an intensive mode interact with the courts, a water space, the cargo base and special cargo handling equipment. On the example of the design model of the seaport, we collected sufficient data for their further integration into the BIM model and the transfer of information in digital form for its repeated use at different stages of the life cycle of the seaport. The individual information schemes and elements for standardization of the design of offshore mooring structures, taking into account of turnover in object-oriented format with attribute data are offered. The model includes the necessary information on all parameters of operation of the berthing facility, planning of measures for emergency situations, standard calendar work plan, schedules for monitoring the technical condition, financial estimates for operational maintenance, repairs, etc. The activities on the automation of deformation monitoring system, calculation of structural strength of the main structural elements and control risks are additionally proposed. The transition to life-cycle contracts in the operation of marine berthing facilities is justified.

The development of information modeling technologies for construction offers new tasks to develop operational models for facilities, which are locate in most difficult conditions, here an important example is the marine Arctic ports. To build a life cycle model, reliable long-time information about hydrometeorological conditions for the selected port facility is needed. It also requires accurate data on the design and past loads. We offer the basic methods for obtaining the initial data for operation BIM model subject to the technical and design documentation are absent, what is a common practice for old facilities. The main theses for development of information BIM model for a marine port’s facilities exploitation in the Arctic are proposed in this paper. At the initial stage of description of the structure life cycle, it is necessary to develop an electronic passport of the facility that would contain the basic geometric characteristics of the structures elements, the information about the applied materials and their physical and mechanical properties, coordinates of the plan and deformation geodetic network in the digital format. At the next stage, it is necessary to provide automated monitoring for measuring the main parameters of loads, deformations and climatic conditions, which in combination ensure the safety of the port’s structures.

The task of technical and economic regulation within mutual international recognition of testing laboratories are considered. Codes and procedures within requirements of international ISO/IEC standards of a series 17000 for elimination of non-tariff barriers and interlaboratory exchange of experts in the field of high-rise marine construction are considered. In paper, the methods of assessment of formation of economically justified cost of works at inspection and monitoring of technical condition of high-rise marine wharf engineering port structure based on settlement and actual labor input were applied. For the countries of EU, data on the average cost of works of testing laboratory within a week have been taken as a basis. Such approach will be objective as considers only expenses on obligatory actions in the course of inspection of technical condition of port engineering constructions. The analysis of public results of financial activities of the accredited organizations allowed to calculate the main indicators of the size of necessary profit and overheads at observance of all requirements imposed to test laboratories including taking into account their future technical development. The offered practice corresponds to the general direction by mutual international recognition of independent testing laboratories and can be use in the future.