Search

We report measurements of the cross section and a complete set of polarization transfer observables for the ${}^{16}{\rm O}(\vec{p},\vec{n}){}^{16}{\rm F}$ reaction at a bombarding energy of $T_p$ = 296 MeV and a reaction angle of $\theta_{\rm lab}$ = $0^{\circ}$. The data are compared with distorted-wave impulse approximation calculations employing the large configuration-space shell-model (SM) wave functions. The well-known Gamow-Teller and spin-dipole (SD) states at excitation energies of $E_x$ $\lesssim$ 8 MeV have been reasonably reproduced by the calculations except for the spin--parity $J^{\pi}$ = $2^-$ state at $E_x$ = 5.86 MeV. The SD resonance at $E_x$ $\simeq$ 9.5 MeV appears to have more $J^{\pi}$ = $2^-$ strength than $J^{\pi}$ = $1^-$ strength, consistent with the calculations. The data show significant strength in the spin-longitudinal polarized cross section $ID_L(0^{\circ})$ at $E_x$ $\simeq$ 15 MeV, which indicates existence of the $J^{\pi}$ = $0^-$ SD resonance as predicted in the SM calculations., Comment: 6 figures, submitted to Physical Review C

Comparisons of lattice-QCD calculations of semileptonic form factors with experimental measurements often display two sets of points, one each for lattice QCD and experiment. Here we propose to display the output of a lattice-QCD analysis as a curve and error band. This is justified, because lattice-QCD results rely in part on fitting, both for the chiral extrapolation and to extend lattice-QCD data over the full physically allowed kinematic domain. To display an error band, correlations in the fit parameters must be taken into account. For the statistical error, the correlation comes from the fit. To illustrate how to address correlations in the systematic errors, we use the Becirevic-Kaidalov parametrization of the D -> pi l nu and D -> K l nu form factors, and a analyticity-based fit for the B -> pi l nu form factor f_+., Comment: 6 pp; v2 conforms with published version (one additional sentence and reference to clarify a point)

We calculate the form factor f_+(q^2) for B-meson semileptonic decay in unquenched lattice QCD with 2+1 flavors of light sea quarks. We use Asqtad-improved staggered light quarks and a Fermilab bottom quark on gauge configurations generated by the MILC Collaboration. We simulate with several light quark masses and at two lattice spacings, and extrapolate to the physical quark mass and continuum limit using heavy-light meson staggered chiral perturbation theory. We then fit the lattice result for f_+(q^2) simultaneously with that measured by the BABAR experiment using a parameterization of the form factor shape in q^2 which relies only on analyticity and unitarity in order to determine the CKM matrix element |V(ub)|. This approach reduces the total uncertainty in |V(ub)| by combining the lattice and experimental information in an optimal, model-independent manner. We find a value of |V(ub)| x 10^3 = 3.38 +/- 0.36., Comment: 59 pages, 11 figures v2: Added table with form factor covariance matrix. Added references. v3: Fixed typos. Corrected heavy-quark discretization errors and subsequent determination of Vub. Central value of Vub unchanged, but error in Vub changed in last decimal place. Version submitted to Phys. Rev. D

We present the first lattice QCD calculation of the form factor for B-> D* l nu with three flavors of sea quarks. We use an improved staggered action for the light valence and sea quarks (the MILC configurations), and the Fermilab action for the heavy quarks. The form factor is computed at zero recoil using a new double ratio method that yields the form factor more directly than the previous Fermilab method. Other improvements over the previous calculation include the use of much lighter light quark masses, and the use of lattice (staggered) chiral perturbation theory in order to control the light quark discretization errors and chiral extrapolation. We obtain for the form factor, F_{B-> D*}(1)=0.921(13)(20), where the first error is statistical and the second is the sum of all systematic errors in quadrature. Applying a 0.7% electromagnetic correction and taking the latest PDG average for F_{B-> D*}(1)|V_cb| leads to |V_cb|=(38.7 +/- 0.9_exp +/- 1.0_theo) x 10^-3., Comment: 48 pages, 9 figures. Sections VI and VII D clarified, minor typos corrected and references added. Version published in PRD

We perform numerical simulations of lattice QCD with two flavors of dynamical overlap quarks, which have exact chiral symmetry on the lattice. While this fermion discretization is computationally demanding, we demonstrate the feasibility to simulate reasonably large and fine lattices by a careful choice of the lattice action and algorithmic improvements. Our production runs are carried out on a 16^3 \times 32 lattice at a single lattice spacing around 0.12 fm. We explore the sea quark mass region down to m_s/6, where m_s is the physical strange quark mass, for a good control of the chiral extrapolation in future calculations of physical observables. We describe in detail our setup and algorithmic properties of the production simulations and present results for the static quark potential to fix the lattice scale and the locality of the overlap operator., Comment: 38 pages, 28 figures; v2: minor changes in text, references added, version published in PRD

We perform lattice simulations of two-flavor QCD using Neuberger's overlap fermion, with which the exact chiral symmetry is realized at finite lattice spacings. The epsilon-regime is reached by decreasing the light quark mass down to 3 MeV on a 16^3 32 lattice with a lattice spacing \sim 0.11 fm. We find a good agreement of the low-lying Dirac eigenvalue spectrum with the analytical predictions of the chiral random matrix theory, which reduces to the chiral perturbation theory in the epsilon-regime. The chiral condensate is extracted as \Sigma(2 GeV) = (251(7)(11) MeV)^3, where the errors are statistical and an estimate of the higher order effects in the epsilon-expansion., Comment: 10pages, 4figures

We present an overview of our project of large-scale simulations with dynamical overlap fermions. The first production run in two-flavor QCD is on-going using the Iwasaki gauge action on a 16^3 \times 32 lattice at the lattice spacing of 0.12fm with six sea quark masses down to m_{s,phys}/6, where m_{s,phys} is the physical strange quark mass. We briefly introduce our choice of the lattice action and simulation algorithm, and describe the present status of the production run. Preliminary results on the light meson masses and the static quark potential are also reported., Comment: 7 pages, 8 figures, talk presented at Lattice 2006 (Chiral Symmetry)

We report on the two-flavor QCD simulation in the epsilon-regime using the overlap fermion formulation. Sea quark mass is reduced to ~ 2 MeV on a 16^3x32 lattice with the lattice spacing ~ 0.11fm. Topological charge is fixed at Q=0. We compare the eigenvalue distribution of the overlap-Dirac operator with the prediction of the chiral random matrix theory. Preliminary results on meson correlators are also reported., Comment: 7 pages, talk presented at Lattice 2006 (chiral symmetry); to appear in Proceedings of Science, PoS(LAT2006)050

We launched a project to perform dymanical fermion simulations using the overlap fermion formulation for sea quarks. In order to avoid the appearace of near-zero modes of the hermitian Wilson-Dirac operator $H_W$, we introduce a pair of extra Wilson fermions with a large negative mass term. Crossing of the topological boundary is then strictly prohibited, and the topological charge is conserved during simulations. It makes the simulations substantially faster compared to the algorithms which allow the topology change. We discuss on the finite volume effects due to the fixed global topology., Comment: 7 pages, 4 figures, talk presented at Lattice 2006 (chiral symmetry); to appear in Proceedings of Science, PoS(LAT2006)052

We perform a systematic study of low-lying eigenmodes of $H_w$ with various gauge actions to find the optimal choice for dynamical overlap fermion simulations, with which one may achieve lower numerical cost for HMC and better locality property of the overlap kernel. For this purpose, our study is made with emphasis on the distribution of low-lying eigenvalues and the mobility edge with and without dynamical overlap fermions., Comment: 7 pages, 7 figures, talk presented at Lattice 2006 (chiral symmetry). References added

In the past year, we calculated with lattice QCD three quantities that were unknown or poorly known. They are the $q^2$ dependence of the form factor in semileptonic $D\to Kl\nu$ decay, the decay constant of the $D$ meson, and the mass of the $B_c$ meson. In this talk, we summarize these calculations, with emphasis on their (subsequent) confirmation by experiments., Comment: v1: talk given at the International Conference on QCD and Hadronic Physics, Beijing, June 16-20, 2005; v2: poster presented at the XXIIIrd International Symposium on Lattice Field Theory, Dublin, July 25-30

We present the first lattice QCD calculation with realistic sea quark content of the D^+ meson decay constant f_{D^+}. We use the MILC Collaboration's publicly available ensembles of lattice gauge fields, which have a quark sea with two flavors (up and down) much lighter than a third (strange). We obtain f_{D^+} = 201 +/- 3 +/- 17 MeV, where the errors are statistical and a combination of systematic errors. We also obtain f_{D_s} = 249 +/- 3 +/- 16 MeV for the D_s meson., Comment: note added on recent CLEO measurement; PRL version

We determine the leptonic decay constants in three flavor unquenched lattice QCD. We use O(a^2)-improved staggered light quarks and O(a)-improved charm quarks in the Fermilab heavy quark formalism. Our preliminary results, based upon an analysis at a single lattice spacing, are f_Ds = 263(+5-9)(+/-24) MeV and f_D = 225(+11-13)(+/-21) MeV. In each case, the first reported error is statistical while the is the combined systematic uncertainty., Comment: Talk presented at Lattice2004(heavy), Fermilab, June 21-26, 2004. 3 pages, 2 figures

We present results for form factors of semileptonic decays of $D$ and $B$ mesons in 2+1 flavor lattice QCD using the MILC gauge configurations. With an improved staggered action for light quarks, we successfully reduce the systematic error from the chiral extrapolation. The results for $D$ decays are in agreement with experimental ones. The results for B decays are preliminary. Combining our results with experimental branching ratios, we then obtain the CKM matrix elements $|V_{cd}|$, $|V_{cs}|$, $|V_{cb}|$ and $|V_{ub}|$. We also check CKM unitarity, for the first time, using only lattice QCD as the theoretical input., Comment: Talk presented at Lattice2004(heavy); 3 pages, 3 figures

We present the first three-flavor lattice QCD calculations for $D\to \pi l\nu$ and $D\to K l\nu$ semileptonic decays. Simulations are carried out using ensembles of unquenched gauge fields generated by the MILC collaboration. With an improved staggered action for light quarks, we are able to simulate at light quark masses down to 1/8 of the strange mass. Consequently, the systematic error from the chiral extrapolation is much smaller than in previous calculations with Wilson-type light quarks. Our results for the form factors at $q^2=0$ are $f_+^{D\to\pi}(0)=0.64(3)(6)$ and $f_+^{D\to K}(0) = 0.73(3)(7)$, where the first error is statistical and the second is systematic, added in quadrature. Combining our results with experimental branching ratios, we obtain the CKM matrix elements $|V_{cd}|=0.239(10)(24)(20)$ and $|V_{cs}|=0.969(39)(94)(24)$, where the last errors are from experimental uncertainties., Comment: Fermilab Lattice, MILC, and HPQCD Collaborations; 4 pp

This is a list of open problems on invariants of knots and 3-manifolds with expositions of their history, background, significance, or importance. This list was made by editing open problems given in problem sessions in the workshop and seminars on `Invariants of Knots and 3-Manifolds' held at Kyoto in 2001., Comment: Edited by T. Ohtsuki. Published by Geometry and Topology Monographs at http://www.maths.warwick.ac.uk/gt/GTMon4/paper24.abs.html

We present a detailed study of the charmonium spectrum using anisotropic lattice QCD. We first derive a tree-level improved clover quark action on the anisotropic lattice for arbitrary quark mass. The heavy quark mass dependences of the improvement coefficients, i.e. the ratio of the hopping parameters $\zeta=K_t/K_s$ and the clover coefficients $c_{s,t}$, are examined at the tree level. We then compute the charmonium spectrum in the quenched approximation employing $\xi = a_s/a_t = 3$ anisotropic lattices. Simulations are made with the standard anisotropic gauge action and the anisotropic clover quark action at four lattice spacings in the range $a_s$=0.07-0.2 fm. The clover coefficients $c_{s,t}$ are estimated from tree-level tadpole improvement. On the other hand, for the ratio of the hopping parameters $\zeta$, we adopt both the tree-level tadpole-improved value and a non-perturbative one. We calculate the spectrum of S- and P-states and their excitations. The results largely depend on the scale input even in the continuum limit, showing a quenching effect. When the lattice spacing is determined from the $1P-1S$ splitting, the deviation from the experimental value is estimated to be $\sim$30% for the S-state hyperfine splitting and $\sim$20% for the P-state fine structure. Our results are consistent with previous results at $\xi = 2$ obtained by Chen when the lattice spacing is determined from the Sommer scale $r_0$. We also address the problem with the hyperfine splitting that different choices of the clover coefficients lead to disagreeing results in the continuum limit., Comment: 43 pages, 49 eps figures, revtex; minor changes, version to appear in Physical Review D

We present our final results of the charmonium spectrum in quenched QCD on anisotropic lattices. Simulations are made with the plaquette gauge action and a tadpole improved clover quark action employing $\xi = a_s/a_t = 3$. We calculate the spectrum of S- and P-states and their excitation, and study the scaling behavior of mass splittings. Comparison is made with the experiment and previous lattice results. The issue of hyperfine splitting for different choices of the clover coefficients obtained by Klassen is discussed., Comment: Lattice2001(heavyquark), 3 pages, 7 eps figures

We present results for the equation of state for pure SU(3) gauge theory obtained on anisotropic lattices with the anisotropy $\xi \equiv a_s/a_t = 2$. The pressure and energy density are calculated on $N_t / \xi = 4, 5$ and 6 lattices with the integral method. They are found to satisfy the leading $1/N_t^2$ scaling from our coarsest lattice $N_t/\xi=4$. This enables us to carry out well controlled continuum extrapolations. We find that the pressure and energy density agree with those obtained using the isotropic plaquette action, but have smaller and more reliable errors., Comment: Lattice2001(hightemp), 3 pages, 4 figures

Finite temperature SU(3) gauge theory is studied on anisotropic lattices using the standard plaquette gauge action. The equation of state is calculated on $16^{3} \times 8$, $20^{3} \times 10$ and $24^{3} \times 12$ lattices with the anisotropy $\xi \equiv a_s / a_t = 2$, where $a_s$ and $a_t$ are the spatial and temporal lattice spacings. Unlike the case of the isotropic lattice on which $N_t=4$ data deviate significantly from the leading scaling behavior, the pressure and energy density on an anisotropic lattice are found to satisfy well the leading $1/N_t^2$ scaling from our coarsest lattice, $N_t/\xi=4$. With three data points at $N_t/\xi=4$, 5 and 6, we perform a well controlled continuum extrapolation of the equation of state. Our results in the continuum limit agree with a previous result from isotropic lattices using the same action, but have smaller and more reliable errors., Comment: RevTeX, 21 pages, 17 PS figures. A quantitative test about the benefit of anisotropic lattices added, minor errors corrected. Final version for PRD

We present results of a first study of equation of state in finite-temperature QCD with two flavors of Wilson-type quarks. Simulations are made on lattices with temporal size $N_t=4$ and 6, using an RG-improved action for the gluon sector and a meanfield-improved clover action for the quark sector. The lines of constant physics corresponding to fixed values of the ratio $m_{\rm PS}/m_{\rm V}$ of the pseudo-scalar to vector meson masses at zero temperature are determined, and the beta functions which describe the renormalization-group flow along these lines are calculated. Using these results, the energy density and the pressure are calculated as functions of temperature along the lines of constant physics in the range $m_{\rm PS}/m_{\rm V} = 0.65$--0.95. The quark mass dependence in the equation of state is found to be small for $m_{\rm PS}/m_{\rm V} \simlt 0.8$. Comparison of results for $N_t=4$ and $N_t=6$ lattices show significant scaling violation present in the $N_t=4$ results. At high temperatures the results for $N_t=6$ are quite close to the continuum Stefan-Boltzmann limit, suggesting the possibility of a precise continuum extrapolation of thermodynamic quantities from simulations at $N_t\simgt 6$., Comment: RevTeX, 33 pages, 27 PS figures. A test of finite spatial volume effect presented and a few other discussions added. Final version for PRD

We present the results of quenched charmonium spectrum for S- and P-states, obtained by a relativistic heavy quark method on anisotropic lattices. Simulations are carried out using the standard plaquette gauge action and a meanfield-improved clover quark action at $a_t^{-1} = 3$--6 GeV with the renormalized anisotropy fixed to $\xi \equiv a_s/a_t =3$. We study the scaling of our fine and hyperfine mass splittings, and compare with previous results., Comment: Lattice 2000 (Heavy Quark Physics), 4 pages, 6 eps figures, LaTeX(espcrc2.sty)

We study the finite-temperature phase structure and the transition temperature of QCD with two flavors of dynamical quarks on a lattice with the temporal size $N_t=4$, using a renormalization group improved gauge action and the Wilson quark action improved by the clover term. The region of a parity-broken phase is identified, and the finite-temperature transition line is located on a two-dimensional parameter space of the coupling ($\beta=6/g^2$) and hopping parameter $K$. Near the chiral transition point, defined as the crossing point of the critical line of the vanishing pion mass and the line of finite-temperature transition, the system exhibits behavior well described by the scaling exponents of the three-dimensional O(4) spin model. This indicates a second-order chiral transition in the continuum limit. The transition temperature in the chiral limit is estimated to be $T_c = 171(4)$ MeV., Comment: Typographical errors fixed. RevTeX, 19 pages, 17 PS figures

We study finite-temperature phase transition and equation of state for two-flavor QCD at $N_t=4$ using an RG-improved gauge action and a meanfield-improved clover quark action. The pressure is computed using the integral method. The O(4) scaling of chiral order parameter is also examined., Comment: LATTICE99(finite temperature), 3 pages

We present results for the equation of state for pure SU(3) gauge theory obtained with a renormalization-group (RG) improved action. The energy density and pressure are calculated on a $16^3\times 4$ and a $32^3\times 8$ lattice employing the integral method. Extrapolating the results to the continuum limit, we find the energy density and pressure to be in good agreement with those obtained with the standard plaquette action within the error of 3-4%., Comment: LaTeX(espcrc2.sty), 3 pages, 4 eps figures, Talk presented at LATTICE99(finite temperature)

A lattice study of the equation of state for pure SU(3) gauge theory using a renormalization-group (RG) improved action is presented. The energy density and pressure are calculated on a $16^3\times 4$ and a $32^3\times 8$ lattice employing the integral method. Extrapolating the results to the continuum limit, we find the energy density and pressure to be in good agreement with those obtained with the standard plaquette action within the error of 3-4%., Comment: 17 pages, 14 figures, revtex