Search

Edible insects (EIs) have recently gained attention as an alternative and more sustainable food, emerging as an alternative to other protein foods with higher environmental impacts, like bovine meat. EIs contain a valuable composition of macro and micronutrients, important for human nutrition. Nevertheless, their consumption is not yet widespread in Western countries, such as in Europe. This work aimed to study how consumers in three different European locations perceive the role of EIs in human nutrition. Data collection was carried out by a questionnaire survey in three countries (Croatia, Lithuania, and Portugal), and 1723 participants were included in the study. For the treatment of the data, SPSS software was used, and chi-square tests and tree classification analysis were performed. The results showed that for all the statements presented to the participants, significant differences were found in information about EIs according to country. The results further highlighted that the participants were better informed about the high protein content of EIs, while not being well informed about their possible anti-nutritive effects. Tree classification revealed that the most important discriminating variable was country, with Lithuanian participants being better informed than those from Portugal or Croatia.

In the present study, the nutritive composition and mineral content of the leaves of eight species of Acacia trees were evaluated to assess their potential for different purposes, such as food resources for ruminants and mineral sources in soils. Caco-2 cells were employed to assess cytotoxicity, revealing that the extracts exhibited no cytotoxic effects after cellular incubation, suggesting their suitability as an alternative animal feed. The leaves proved to be a promising source of protein and fiber, offering an alternative to meet the needs of ruminants. The protein content differed among species, ranging from 18.96% in A. cyclops to 14.04% in A. melanoxylon. Similarly, fiber content varied from 35.52% in A. melanoxylon to 16.43% in A. cyclops. The species displayed moderate to high levels of minerals, particularly concentrations of Ca, P, and K. These values varied among species, ranging from 8452.90 to 28,465.31 mg/kg DM for Ca, 309.61 to 1293.82 mg/kg DM for P, and 5557.24 to 11,475.85 mg/kg DM for K, respectively. Each species displayed a distinct profile regarding the analyzed parameters, suggesting varied potential for their respective use. Additionally, vibrational spectroscopy analysis proved to be a highly valuable and dependable method for distinguishing between species.

Plant-based beverages (PBB) consumption has increased significantly worldwide due to an interest in vegetarian/vegan diets, taste preferences, health and ethical and environmental issues. Therefore, this study intends to investigate consumption habits, consumer preferences and consumers’ level of knowledge about PBB. In this study, a voluntary, anonymous questionnaire survey was applied to a sample of participants from Portugal. The sample was recruited by convenience, and therefore, the distribution among the groups was not even. Data analysis involved different statistical techniques: basic statistics, chi-square tests, factor analysis, cluster analysis and tree classification analysis. The results indicated that the most consumed PBB were almond, soy and oat beverages. The majority of consumers chose these beverages for nutritional and health reasons, while a smaller number consumed them as part of a vegetarian or vegan diet. The main motivations for consuming PBB are mainly associated with sustainability and health benefits. The results regarding the respondents’ knowledge about PBB revealed that a health-related profession was the most significant predictor. These results allowed us to conclude that the factors of nutrition, health, ethics and practice of a vegetarian/vegan diet influence the consumption of PBB. It was also concluded that being in a healthcare profession, along with age and professional status within this field, were significant factors influencing the level of knowledge about PBB.

Although edible insects (EIs) are encouraged as a sustainable source of protein, their consumption is not as generalised as other types of food that are internationally accepted. While in some regions of the world, EIs are part of the gastronomic and cultural traditions, in other regions, people are not so receptive to this type of food, and some people even express some disgust towards it. Hence, this research focused on the habits of the participants regarding the consumption of insects as well as their perceptions about EIs being or not a part of the local culture or gastronomic patrimony. A questionnaire survey was implemented in fourteen countries (Brazil, Croatia, Greece, Latvia, Lebanon, Lithuania, Mexico, Poland, Portugal, Romania, Serbia, Slovenia, Spain, and Turkey), and globally, 7222 adult participants responded to the questionnaire. SPSS software (version 28) was used to process the data and carry out chi-square tests and Factor Analyses (FA). The obtained results showed significant differences between countries for all the questions included in the survey, either those regarding the habits of the participants or their opinions about the facts linked with EI tradition or cultural aspects. It was found that participants from Mexico consume EIs more than in all other countries and that strong motivations that would lead to consumption among those who do not consume include curiosity and food shortage. The solution obtained with FA considering the ten statements of the scale consisted of two factors: F1—Culture and Tradition of EIs (α = 0.675) and F2—Acceptance of EIs (α = 0.614). In conclusion, the consumption of EIs and the perceptions of people are highly variable according to geographic location and cultural environment.

In ancient times, the shoots of certain species within the Cytisus genus were used as animal feed. Cytisus striatus is a plentiful and widespread shrub that has long been utilized as a soil fertilizer in the Iberian Peninsula. The flowers of this shrub have traditionally been employed for medicinal purposes. However, the nutritional value of yellow broom flowers and fruits remains largely unexplored. In this study, flowers and fruit of C. striatus (Cytisus striatus) were collected from natural shrubs at three different locations in Portugal during the same year. An analytical assessment of their macro and micronutrient content was conducted. Regarding nutritional composition, flowers and fruits exhibited a fibre content of 18% and 42%, protein content of 21% and 12%, lipid content of 2% and 1%, carbohydrate content of 43% and 14%, and ash content of 4% and 3%, respectively. Potassium was the most abundant mineral, with concentrations of approximately 20,094 mg/kg in the flowers and 11,746 mg/kg in the fruits, followed by calcium, phosphorus, and magnesium. Compared to some edible flowers and fruits, these plant parts of C. striatus showed macro and micronutrient values similar to species such as lavender, lupins, and cowpea pod husks.

There is a trend towards the commercialisation of strawberry tree fruit spirit (AUS) with wood ageing, motivated by its favourable sensory characteristics. Additionally, further studies are necessary to elucidate the optimal conditions regarding ageing time and toasting level. This study evaluated the changes in colour and low molecular weight compounds (LMWC) of AUS aged for three and six months using oak wood (Quercus robur L.) with light, medium and medium plus toasting levels. For this purpose, phenolic acids (gallic, ellagic, ferulic and syringic acids), phenolic aldehydes (vanillin, syringaldehyde, coniferaldehyde and sinapaldehyde) and furanic aldehydes (furfural, 5-hydroxymethylfurfural and 5-methylfurfural) were quantified using the HPLC method. Chromatic characteristics, colour sensory analysis and total polyphenol index were also analysed. Fourier transform near-infrared spectroscopy (FT-NIR) was used to discriminate between samples. The results emphasized the favourable effect of oak wood contact on enhancing the colour and enriching AUS with low molecular weight compounds (LMWC). AUS aged in medium toasted wood exhibits high levels of total phenolic index, 5-hydroxymethylfurfural, furfural, coniferaldehyde, sinapaldehyde, sum LMWC and chromatic characteristics b* and C. Concentrations of syringaldehyde, ellagic acid, vanillin and syringic acid and a lighter colour (a* chromaticity coordinates) are higher in AUS aged with slightly more toasted wood. Nearly all analysed parameters showed an increase with ageing time. The FT-NIR technique allowed for the differentiation of aged AUS, focusing more on ageing time than on toasting level.

Beekeeping management is greatly influenced by spatial factors (e.g., land use/land cover, roads, or electrical energy networks), so GIS are a powerful tool to overlap and relate a variety of spatial data levels and, consequently, a very useful tool for beekeeping activity planning. This study was developed within the intervention area of three controlled zones managed by Portuguese Beekeepers Associations. The methodology, based on multi-criteria decision analysis, integrates several criteria, such as hydrographic networks, road networks, soil occupation, solar radiation, and electromagnetic radiation sources. These criteria were proposed and evaluated through online questionnaires carried out with beekeepers. Concerning the selected criteria and the respective geographical data, the most relevant were land use/land cover and water availability, with a significance of 44% and 24%, respectively. The beekeeping suitability map enabled us to evaluate the degree of compliance for the actual location of apiaries, with 60% of the apiaries being installed in high potential areas. In the context of beekeeping planning, the potential of the techniques applied seems to be an important tool for optimizing the location of apiaries and the profitability of beekeeping.

Because edible insects (EI) have been, in recent years, recommended as a nutritious animal protein food with enormous environmental advantages over other sources of animal protein for human consumption, studies aimed at investigating the consumer perspective have become more prominent. Hence, this study intended to examine the perceptions of participants from different countries about the commercialization and economic and social impacts of edible insects. The study was made using a questionnaire survey, and data were collected in Brazil, Croatia, Greece, Latvia, Lebanon, Lithuania, Mexico, Poland, Portugal, Romania, Serbia, Slovenia, Spain, and Turkey. The final number of received answers was 7222 participants. For the treatment of the results, different statistical techniques were used: factor analysis, internal reliability by Cronbach’s alpha, cluster analysis, ANOVA to test differences between groups, and Chi-square tests. The results obtained confirmed the validity of the scale, constituted by 12 out of the 14 items initially considered, distributed by 4 factors: the first related to the economic impact of EIs, the second related to the motivation for consumption of EIs, the third related to the places of purchase of EIs, and the fourth corresponding to a question presented to the participants as a false statement. A cluster analysis allowed identifying three clusters, with significant differences between them according to all the sociodemographic variables tested. Also, it was found that the participants expressed an exceptionally high level of agreement with aspects such as the difficulty in finding EIs on sale, knowledge acting as a strong motivator for EI consumption, and the role of personalities and influencers in increasing the will to consume EIs. Finally, practically all sociodemographic variables were found to be significantly associated with perceptions (country, sex, education, living environment, and income), but not age. In conclusion, the perceptions about EI commercialization were investigated and revealed differences among samples originating from different countries. Moreover, the sociodemographic characteristics of the participants were found to be strongly associated with their perceptions.

This study intended to evaluate the potential industrial applications of various Acacia species (Acacia melanoxylon, Acacia longifolia, Acacia cyclops, Acacia retinodes, Acacia pycnantha, Acacia mearnsii, and Acacia dealbata) by examining their chemical composition, antioxidant, and antimicrobial properties. Using high-resolution mass spectrometry, a comprehensive analysis successfully identified targeted compounds, including flavonoids (flavonols/flavones) and phenolic acids, such as 4-hydroxybenzoic acid, p-coumaric acid, and ellagic acid. Additionally, p-coumaric acid was specifically identified and quantified within the hydroxycinnamic aldehydes. This comprehensive characterization provides valuable insights into the chemical profiles of the studied species. Among the studied species, A. pycnantha exhibited a higher concentration of total phenolic compounds, including catechin, myricetin, quercetin, and coniferaldehyde. Furthermore, A. pycnantha displayed notable antibacterial activity against K. pneumoniae, E. coli, S. Typhimurium, and B. cereus. The identified compounds in Acacia pods and their shown antibacterial activities exhibit promising potential for future applications. Moreover, vibrational spectroscopy was a reliable method for distinguishing between species. These significant findings enhance our understanding of Acacia species and their potential for various industrial applications.

Digestate contains many essential nutrients for crops, including nitrogen (N) and phosphorus (P), and it can alter the biogeochemical cycle of nutrients and soil functionality. This work aimed to assess the fertilizing effects of digestate on chemical and biological soil properties in a field experiment in eastern Portugal with two horticultural crops involving nine treatments: control without fertilization; mineral N fertilization with 85 kg ha−1; fertilization with digestate (DG) with increasing N rates (85, 170, 255, or 340 kg N ha−1); and fertilization with different combinations of digestate plus mineral N (DG at 85 or 170 kg N plus 60 kg mineral N ha–1 or DG at 170 kg N plus 25 kg mineral N ha–1). In addition to N, digestate supplied significant amounts of P, Ca, K, and Mg and significantly increased soil Olsen P, mineral N, and organic C. At high doses, it decreased phosphatase and β-glucosidase activities, as well as fungi and bacterial biomass, compared to the control or mineral N fertilization, and it also negatively affected soil P and C cycling capacity and microbial biomass. The organic to total N ratio and the N to P ratio in digestate are crucial properties for evaluating its agronomic management as fertilizer.

The cheese rind is the natural food packaging of cheese and is subject to a wide range of external factors that compromise the appearance of the cheese, including color defects caused by spoilage microorganisms. First, eight films based on whey protein isolate (WPI) coatings were studied, of which IS3CA (WPI 5% + sorbitol 3% + citric acid 3%) was selected for presenting better properties. From the IS3CA film, novel films containing melanin M1 (74 µg/mL) and M2 (500 µg/mL) were developed and applied to cheese under proof-of-concept and industrial conditions. After 40 days of maturation, M2 presented the lowest microorganism count for all the microbial parameters analyzed. The cheese with M2 showed the lowest lightness, which indicates that it is the darkest cheese due to the melanin concentration. It was found that the mechanical and colorimetric properties are the ones that contribute the most to the distinction of the M2 film in cheese from the others. Using FTIR-ATR, it was possible to distinguish the rinds of M2 cheeses because they contained the highest concentrations of melanin. Thus, this study shows that the film with M2 showed the best mechanical, chemical and antimicrobial properties for application in cheese.

The Acacia genus is considered one of the most invasive taxa in some habitats, namely coastal dunes, maritime calcareous soils, fresh lands in the valleys, mountainous areas, and the banks of watercourses and roadsides. In Portugal, the severity risk is very high, so this study aimed to evaluate the nutritional and mineral contents of the green pods as a potential source for livestock feeds and soil fertilizer because, as far as we know, there is no use for this species. The seven different species of Acacia (Acacia mearnsii Link, Acacia longifolia (Andrews) Willd, Acacia melanoxylon R. Br., Acacia pycnantha Bentham, Acacia dealbata Link., Acacia retinodes Schlecht, and Acacia cyclops A. Cunn. ex G. Don fil) were evaluated. The results showed that Acacia green pods have a high protein, fibre and minerals content, especially in potassium (K), calcium (Ca) and magnesium (Mg). All species present a different profile of the studied parameters, suggesting different potentials for their future use. Near-infrared spectroscopy was a potential tool to predict the earlier quality of the Acacia green pods to better select the raw material for the different applications.

Due to its high prevalence, infertility has become a prominent public health issue, posing a significant challenge to modern reproductive medicine. Some clinical conditions that lead to female infertility include polycystic ovary syndrome (PCOS), endometriosis, and premature ovarian failure (POF). Follicular fluid (FF) is the biological matrix that has the most contact with the oocyte and can, therefore, be used as a predictor of its quality. Volatilomics has emerged as a non-invasive, straightforward, affordable, and simple method for characterizing various diseases and determining the effectiveness of their current therapies. In order to find potential biomarkers of infertility, this study set out to determine the volatomic pattern of the follicular fluid from patients with PCOS, endometriosis, and POF. The chromatographic data integration was performed through solid-phase microextraction (SPME), followed by gas chromatography–mass spectrometry (GC-MS). The findings pointed to specific metabolite patterns as potential biomarkers for the studied diseases. These open the door for further research into the relevant metabolomic pathways to enhance infertility knowledge and diagnostic tools. An extended investigation may, however, produce a new mechanistic understanding of the pathophysiology of the diseases.

Possible effects caused by mineral elements during wine spirit ageing are diverse. In this study, the evolution of the mineral composition of wine spirit during ageing with chestnut (Castanea sativa Mill.) wood was investigated. A wine distillate was aged in 250 L wooden barrels (traditional ageing) and in 50 L glass demijohns with wood staves and micro-oxygenation (alternative ageing). Sampling was performed after 21, 60, 180, 270, and 365 days of ageing. The elemental composition of the wine spirits, including alkaline, alkaline earth metals, and heavy metals, was assessed by quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS). For most of the elements, no significant differences between wine spirits from distinct ageing modalities were observed. Ageing time had significant effect on most of them, with different trends and distinct magnitude of changes, depending on each specific element. The concentrations of the mineral elements found in the wine spirits were very low, especially those of heavy metals, which is quite positive in terms of quality and food safety. Novel information on metals released from chestnut wood to wine spirits confirms its appropriateness for ageing this beverage.

The consumption of edible insects (EI) is traditional in many parts of the world, but not in others. In fact, despite globalization and the multiple advantages pointed out about the consumption of EI, there are still many countries where entomophagy is seen with disgust and aversion. This systematic review aimed to examine the motivations that influence the consumption of EI in diverse cultures and understand if there are differences between Western countries (WC) and insect-eating countries (IEC). It further evaluated whether the degree of acceptability was influenced by the form of consumption of the insects (eating whole insects or foods containing insects). This literature review was conducted in November 2021 within three databases, Web of Science, PubMed and Scopus, according to the Preferred Reporting of Items for Systematic Reviews and Meta-analysis and using PRISMA directives. From a total of 245 studies, 31 were selected to be included in this review, based on the inclusion criteria defined: only original research articles, from 2010 or beyond, and written in English. The results indicated that the main motivations that determine the consumption of EI are related to gender, age, sustainability, nutritional value, sensory attributes, tradition/culture, food neophobia, disgust and familiarity/past experiences. Moreover, whereas in IEC, there is a greater focus on factors related to sensory attributes, availability, affordability and preferences, in WC, there is a bigger emphasis on determinants such as nutritional value, sustainability, benefits, familiarity/past experience, tradition/culture, food neophobia and disgust. Finally, it was observed that people in WC are more willing to accept food products containing insects rather than the whole insect, which is one of the most promising points to be addressed in the future. Overall, this review highlights that there are numerous factors influencing the consumption of edible insects, and differences between WC and IEC are clear in what concerns the motivations of consumers. Hence, targeting market segments and consumers’ characteristics has to be present when designing strategies to incentivize the consumption of EI in WC as a part of a global strategy for sustainability of food systems.

The blending of wine spirits (WSs) produced in different ageing conditions is a key operation to impart specific features, enhance complexity, increase the final product’s quality and ensure brand consistency over the years, but requires time, labour and experienced blenders. This work aimed to develop a novel technology, natural blending, towards innovation and a more sustainable production process, adding value to the final product. WSs were aged in 250 L barrels and in 1000 L stainless steel tanks with wood staves and micro-oxygenation (MOX), using Limousin oak and chestnut wood simultaneously at a 50:50 ratio (natural blending) and separately; after 18 months of ageing, the last ones underwent the blending operation at the same ratio. All WSs were bottled and thereafter the following traits were analysed: alcoholic strength, acidity, dry extract, total phenolic index, low molecular weight compounds by HPLC method, chromatic characteristics and sensory profile. No significant differences in the physicochemical characteristics and sensory profile between the WSs resulting from the two blending technologies were found. Natural blending did not induce changes in the characteristics imparted by each ageing technology. These findings point to natural blending as a reliable alternative to the blending operation, especially in combination with ageing in tanks with staves and MOX.

Honey bee broods (larvae and pupae) can be consumed as human food, offering a rich nutritional value. Therefore, the objective of this work was to present an overview of the nutritional value of the honey bee brood and its gastronomic potential. The results indicated that honey bee broods are rich in protein (including essential amino acids), fat (essentially saturated and monounsaturated fatty acids), carbohydrates, vitamin C and those of the B complex, and minerals such as potassium, magnesium, calcium, and phosphorous. The results further highlight some variability according to the stage of development, with increasing content of fat and protein and decreasing carbohydrates from the larval to the pupal stages. The production of the honey bee brood in the hive, as well as its removal, can impact the wellbeing of the hive. This limits the production potential of the brood aimed at application for gastronomic purposes. The consumption and purchase of honey bee broods as food may be accessible in specialised markets where, for example, ethnic communities consume this type of food. However, in some markets, insects or products produced from insects are not readily accepted because of neophobia and disgust. The role of culinary chefs allied to traditional ways of preparing culinary dishes that include honey bee broods are relevant to motivate more people in western societies to consume of these types of food products.

Acacia spp. is an invasive species that is widespread throughout the Portuguese territory. Thus, it is pertinent to better understand this species in order to find different applications that will value its use. To evaluate the phenolic profile in Acacia flowers, ethanolic extracts obtained through an energized guided dispersive extraction were analysed, focusing on two species, Acacia retinodes and Acacia mearnsii, at two flowering stages. The phytochemical profile of each extract was determined by ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry and high-performance liquid chromatography coupled with diode array detector. The FTIR-ATR technique was used to distinguish the different samples’ compositions. The results showed the presence of high concentrations of phenolic compounds (>300 mg GAE/g extract), among which are flavonoids (>136 mg QE/g extract), for all combinations of species/flowering stages. The phytochemical profile showed a complex composition with 21 compounds identified and quantified (the predominant ones being epicatechin, rutin, vanillin, and catechol). Both species and flowering stages presented significant variations regarding the presence and quantity of phenols and flavonoids, so much so that a principal component analysis performed with FTIR-ATR spectra data of the extracts was able to discriminate between species and flowering stages.

Some diseases still need better therapeutic approaches, including the prevention of development. Natural resources are investigated with this purpose; among them, we decided to use an invasive plant as a main strategy. This will help in two ways: screening new compounds in flowers prevents the plant from causing widespread damage by controlling the dissemination and also obtains crude material for further applications. In the present study, flower extracts from Acacia dealbata Link harvested in Portugal were studied during three stages of flowering. Phenolic compounds were evaluated using HPLC/DAD and the total phenolics as the total flavonoids content was determined. The bioactivities screened were antioxidant potential, inhibitory activities of some enzymes (acetylcholinesterase, lipase and α-glucosidase) and, to complete the screening, the inhibition of microbial growth was determined against Gram-negative and Gram-positive bacteria, as well as for yeasts. The data obtained suggested that the hydroethanolic extracts gave good results for all these biological activities and varied according to the maturation status of the flowers, with the early stage being the most active, which can be related to the chalcones content. This new approach will lead to the possible control of the invasive plant and also future perspective research for therapeutic purposes.

The venom from Apis mellifera intermissa, the main honey bee prevailing in Morocco, has been scarcely studied, despite its known potential for pharmacological applications. In the present work, we investigated the composition, the anti-inflammatory activity, and the venom’s cytotoxic properties from fifteen honey bee venom (HBV) samples collected in three regions: northeast, central, and southern Morocco. The chemical assessment of honey bee venom was performed using LC-DAD/ESI/MSn, NIR spectroscopy and AAS spectroscopy. The antiproliferative effect was evaluated using human tumor cell lines, including breast adenocarcinoma, non-small cell lung carcinoma, cervical carcinoma, hepatocellular carcinoma, and malignant melanoma. Likewise, we assessed the anti-inflammatory activity using the murine macrophage cell line. The study provides information on the honey bee venom subspecies’ main components, such as melittin, apamin, and phospholipase A2, with compositional variation depending on the region of collection. Contents of toxic elements such as cadmium, chromium, and plumb were detected at a concentration below 5 ppm, which can be regarded as safe for pharmaceutical use. The data presented contribute to the first study in HBV from Apis mellifera intermissa and highlight the remarkable antiproliferative and anti-inflammatory effects of HBV, suggesting it to be a candidate natural medicine to explore.

Different ageing technology of wine spirits (WSs) has been investigated, but little has been published on the chemical evolution of aged WS during storage in bottle. The purpose of this study was to examine how 12 months of storage in bottle affected the evolution of antioxidant activity (DPPH, FRAP and ABTS assays), total phenolic index (TPI) and low molecular weight (LMW) compounds content of the WSs aged through alternative technology using three micro-oxygenation levels (MOX) and nitrogen control (N). Results revealed the ability of phenolic compounds from aged WSs to scavenge free radicals during storage in bottle. Among the in vitro antioxidant-activity methods, FRAP assay was the more effective to differentiate WSs according to the ageing technology. Concerning the overall influence of storage in bottle on antioxidant activity, and TPI and LMW compounds content, the higher results were obtained for the MOX modalities (O15, O30 and O60), which showed a similar evolution. In summary, this study provides innovative information, demonstrating that the differences between the aged WSs imparted throughout the ageing process (resulting from different MOX levels) were mostly retained, and only slight modifications during storage in bottle were found.

Near-infrared spectroscopic (NIR) technique was used, for the first time, to predict volatile phenols content, namely guaiacol, 4-methyl-guaiacol, eugenol, syringol, 4-methyl-syringol and 4-allyl-syringol, of aged wine spirits (AWS). This study aimed to develop calibration models for the volatile phenol’s quantification in AWS, by NIR, faster and without sample preparation. Partial least square regression (PLS-R) models were developed with NIR spectra in the near-IR region (12,500–4000 cm−1) and those obtained from GC-FID quantification after liquid-liquid extraction. In the PLS-R developed method, cross-validation with 50% of the samples along a validation test set with 50% of the remaining samples. The final calibration was performed with 100% of the data. PLS-R models with a good accuracy were obtained for guaiacol (r2 = 96.34; RPD = 5.23), 4-methyl-guaiacol (r2 = 96.1; RPD = 5.07), eugenol (r2 = 96.06; RPD = 5.04), syringol (r2 = 97.32; RPD = 6.11), 4-methyl-syringol (r2 = 95.79; RPD = 4.88) and 4-allyl-syringol (r2 = 95.97; RPD = 4.98). These results reveal that NIR is a valuable technique for the quality control of wine spirits and to predict the volatile phenols content, which contributes to the sensory quality of the spirit beverages.

Edible insects (EI) have been consumed as traditional foods in many parts of the globe, but in other regions, they are not readily accepted, particularly in Western countries. However, because EI are suggested to constitute a more sustainable protein food as compared with other sources of animal protein, they can be considered a future food that could help mitigate hunger and malnutrition. Additionally, new gastronomic trends are already targeting this area for exploring new potentialities. The objective of this work was to develop and validate a questionnaire to assess consumers’ perceptions and knowledge about EI in seven different domains: D1. Culture and Tradition, D2. Gastronomic Innovation and Gourmet Kitchen, D3. Environment and Sustainability, D4. Economic and Social Aspects, D5. Commercialization and Marketing, D6. Nutritional Aspects and D7. Health Effects. The 64 items were subjected to item analysis and reliability analysis for validation, and factor analysis was also conducted to identify a grouping structure. The results validated all the items of the seven subscales with high values of Cronbach’s alpha (α = 0.732 for D1, α = 0.795 for D2, α = 0.882 for D3, α = 0.742 for D4, α = 0.675 for D5, α = 0.799 for D6 and α = 0.788 for D7). However, by eliminating 17 items, the final values of the alpha increased in all subscales. Factor analysis with extraction by principal component analysis with varimax rotation extracted 14 factors that explained, in total, 65% of the variance, although the first two factors were the most important (35.7% variance explained). In conclusion, the confirmed usefulness of the questionnaire has been hereby validated for assessing consumer perceptions of and knowledge about EI.

Introduction: A. melanoxylon wood has a large commercial application given its anatomical characteristics and mechanical properties. However studies on the anatomical characterisation of this species grown in Portugal are scarce. Objectives: To describe the transverse anatomical characteristics and their within-tree variation of A. melanoxylon trees growing in Portugal. Methods: 20 trees were analysed in transverse section for tree radial position (10%; 50%; 90%) and five height levels (base, 15%; 35%; 65%; 80%) in north and south directions. Measurements included: fibre diameter (m), fibre wall thickness (m), Runkle index; Flexibility index, vessel number (vessel number /mm2), porosity (%) and vessel width (m). Results: Earlywood fibres have lower wall thickness and higher lumen diameter than latewood fibres. Runkle and flexibility indexes confirm its potential for pulp and paper production. Porosity was lower near the pith as a result of a slight increase of vessel number with smaller size. Conclusion: Blackwood showed potential as an alternative species to supply the industry.

Many species of the so-called exotic plants coexist with native species in a balanced way, but others thrive very quickly and escape human control, becoming harmful—these are called invasive alien species. In addition to overcoming geographic barriers, these species can defeat biotic and abiotic barriers, maintaining stable populations. Ailanthus altissima is no exception; it is disseminated worldwide and is considered high risk due to its easy propagation and resistance to external environmental factors. Currently, it has no particular use other than ornamental, even though it is used to treat epilepsy, diarrhea, asthma, ophthalmic diseases, and seborrhoea in Chinese medicine. Considering its rich composition in alkaloids, terpenoids, sterols, and flavonoids, doubtlessly, its use in medicine or other fields can be maximised. This review will focus on the knowledge of the chemical composition and the discovery of the biological properties of A. altissima to understand this plant better and maximise its possible use for purposes such as medicine, pharmacy, or the food industry. Methods for the extraction and detection to know the chemical composition will also be discussed in detail.

The emergence of multidrug-resistant bacteria has prompted the development of alternative therapies, including the use of natural products with antibacterial properties. The antibacterial properties of Zantaz honey produced in the Moroccan Atlas Mountains against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus was evaluated and analyzed using chemometric tools. Minimum inhibitory concentration (MIC) and Minimum bactericidal concentration (MBC) against S. aureus were the lowest (112.5 ± 54.5 mg/mL), revealing that this species was most sensitive to Zantaz honey. P. aeruginosa showed an intermediate sensitivity (MIC= 118.75 ± 51.9 mg/mL), while E. coli was the most resistant to treatment (MIC = 175 ± 61.2 mg/mL). Content of monosaccharides, certain minerals, and phenolic compounds correlated with antibacterial activity (p < 0.05). Principal component analysis of physicochemical characteristics and antibacterial activity indicated that the parameters most associated with antibacterial activity were color, acidity, and content of melanoidins, fructose, epicatechin, methyl syringate, 4-coumaric acid, and 3-coumaric acid.

Arbutus unedo spirit is a valuable product in Mediterranean countries. This spirit is usually marketed in Portugal without wood ageing. This work aims to characterize the ageing effect on the Arbutus unedo spirit, for three and six months with oak wood (Quercus robur L.) submitted to different toasting levels, based on its chemical composition and its sensory properties. For this purpose, several parameters were analysed: acidity, pH, dry extract, and volatile compounds (methanol, acetaldehyde, ethyl acetate and fusel alcohols). The volatile compounds were identified by GC-MS and quantified by GC-FID. Sensory analysis was performed by a trained panel, who have profiled this beverage, as well as the changes acquired during ageing. Spectroscopic techniques, namely FTIR–ATR, were applied to discriminate the different beverages produced. The results highlighted an increase in Arbutus unedo spirit’s quality with the wood contact, mainly based on the sensory attributes. Additionally, they showed that the best beverages were produced using oak wood with medium toasting levels during three months of ageing.

The purpose of this work is to evaluate the wine spirit aged by an alternative process (staves combined with different micro-oxygenation levels) and its comparison with the traditional process (wooden barrels). This evaluation was made by analyzing the volatile compounds and sensory profile of the spirits during 365 days of ageing. The findings confirmed the role played by oxygen in the volatile profile of aged wine spirits. Samples of alternative ageing modalities were well distinguished from those of wooden barrels based on the volatile profile, namely on the concentrations of several volatile phenols. From a sensory point of view, the results are promising with high overall consistency scores obtained from samples of alternative ageing process modalities.

Alternative technologies for a more sustainable wine spirits’ ageing have been studied but a lack of knowledge on the effect of oxygenation level remains. This work examined the behaviour of low molecular weight compounds, iron and copper of a wine spirit aged in 50 L demijohns with chestnut wood staves combined with three levels of micro-oxygenation or nitrogen. Compounds and mineral elements were quantified by HPLC and FAAS, respectively, in samples collected at 8, 21, 60, 180, 270 and 365 days of ageing. Results showed that most of the compounds underwent significant changes in their content over time and behave differently depending on the wine spirit’s oxygenation level: higher contents of gallic acid, syringic acid and vanillin were associated with lower micro-oxygenation level while higher contents of ellagic acid, syringaldehyde, coniferaldehyde and sinapaldehyde resulted from higher one; lowest contents of these compounds were found in the nitrogen modality. Weak correlation between copper and the studied compounds was evidenced whereas closer relationship between iron, vanillin, gallic, syringic and ellagic acids at end of ageing was observed. This study provides innovative information on the role of oxygen in wine spirit’s ageing, and on chestnut wood effect on wine spirit’s mineral composition.

Sociodemographic characteristics, including regional variations, have been associated with different food consumption patterns. Behavioral factors and lifestyle variables may also contribute to different food dietary trends. In this way, the present study intended to investigate the consumption habits of the most relevant types of dairy products around the world and relate them to sociodemographic factors, for example, age, sex, education and country as well as with some anthropometric and behavioral aspects, for example, body mass index, satisfaction with body weight and exercise or sedentary lifestyles. One other objective of the study was to categorize the lifestyles of the participants, according to measured variables linked with hours of inactivity or exercise, in order to use these as possible differentiating variables for the consumption of dairy products. The study involved a questionnaire survey undertaken on a non-probabilistic convenience sample of participants from Portugal (PT) and Brazil (BR), and participation was voluntary and anonymous. The data analysis involved different statistical techniques: basic statistics, chi-square tests, factor analysis, cluster analysis and tree classification analysis. The results showed that semi skimmed milk is never consumed by about half of the participants (47.4% for PT and 46.7 for BR), and those numbers increase for skimmed (64.8% for PT and 50.9% for BR), chocolate flavored milk (82.6% for PT and 65.6% for BR) and enriched milks (94.8% for PT and 85.3% for BR). Cheeses are also consumed in the two countries by small numbers of people. The number of participants consuming imported cheeses in both countries was particularly low (only 4.0% consume these more than once a week in both countries), suggesting national products may be preferred. It was further observed that those who consume cheese do it seldom (once a week) or sometimes (2–3 times per week). Butter is also consumed by only about half of the adult population (43.8% for PT and 49.5% for BR), but the percentage of those who never consume butter increases for skimmed butter (66.0% for PT and 82.6% for BR) and unsalted butter (70.2% for PT and 69.1% for BR). The consumption of yogurts also follows similar low consumption patterns. The most frequently consumed yogurt types in Portugal are liquid (30.5% consume regularly) and natural yogurts (34.8% consume regularly), while in Brazil the most frequent are creamy fruit pulp yogurt (14.4% consume regularly), liquid (13.7% consume regularly) and Greek type yogurt (10.2% consume regularly). A factor analysis and a cluster analysis established groups according to lifestyles, as follows: 1—Screeners, 2—Exercisers, 3—Travelers and 4—Others. These lifestyles were found to be influential in the consumption of dairy products for all classes of dairy tested: milk, cheese, yogurt and butter. For example, the screeners were found to consume more milk, more butter, more cheese and more yogurt. Additionally, other influential factors were age, sex, education, BMI and satisfaction with body weight. Nevertheless, country was not a meaningfully discriminant variable in relation to the other variables included in the classification analysis. The results concluded that, despite some small differences in the patterns of consumption of dairy products in both countries, the levels of consumption of dairy products are extremely low, for all classes studied (milk, cheese, yogurt or butter). Additionally, it was concluded that some factors are influential on the level of consumption of dairy products, and therefore decision makers can plan their interventions according to the characteristics of the targeted segments of the population, according to lifestyle, age, sex, education, BMI and satisfaction with body weight.

“Pera Rocha do Oeste” is a pear (Pyrus communis L.) variety native from Portugal with a Protected Designation of Origin (PDO). To supply the world market for almost all the year, the fruits are kept under controlled storage. This study aims to identify which classical physicochemical parameters (colour, total soluble solids (TSS), pH, acidity, ripening index, firmness, vitamin C, total phenols, protein, lipids, fibre, ash, other compounds including carbohydrates, and energy) could be fingerprint markers of PDO “Pera Rocha do Oeste”. For this purpose, a data set constituting fruits from the same size, harvested from three orchards of the most representative PDO locations and stored in refrigerated conditions for 2 or 5 months at atmospheric conditions or for 5 months under a modified atmosphere, were selected. To validate the fingerprint parameters selected with the first set, an external data set was used with pears from five PDO orchards stored under different refrigerated conditions. Near infrared (NIR) spectroscopy was used as a complementary tool to assess the global variability of the samples. The lightness of the pulp; the b* CIELab coordinate of the pulp and peel; and the pulp TSS, pH, firmness, and total phenols, due to their lower variability, are proposed as fingerprint markers of this pear.

New lifestyles, higher incomes and better consumer awareness are increasing the demand for a year-round supply of innovative food products. In past decades, important developments have been achieved in areas related to food and the food industry. This review shows that factors influencing performance in new product development (NPD) are dynamic and continuously guiding project development. The data obtained by direct involvement of consumers can impact positively successful product development and enhance the company’s financial performance. The study of consumer behaviour and attitudes towards new foods encompasses multiple aspects, such as preference, choice, desire to eat certain foods, buying intentions and frequency of consumption. Additionally, both the consumers’ willingness to purchase and the willingness to pay a premium are important in NPD, launching and success.

This study investigated the knowledge and use of edible flowers (EF) in two countries, Portugal, in Europe, and Costa Rica, in Latin America, and aimed to evaluate the similarities and/or differences regarding the utilization of EF in gastronomy. This work consisted of a questionnaire survey, undertaken on a sample of 290 participants. The results indicate that most people surveyed (87%) have heard about EF but believe there is not enough information about them (96%). Only one third of participants consider there are risks associated with the consumption of EF, being those related to toxicity and pesticides. Significant differences (p < 0.05) were found between participants from the two countries but not with different professional areas. About half (48%) of the participants had already consumed EF, mostly for decoration or confection of dishes (77% positive answers) and in salads (75%). The flowers consumed most frequently were chamomile and rose, respectively, in Costa Rica and Portugal. Reasons pointed out to consume EF include decoration, taste, novelty and aroma, while aspects such as nutritional value or antioxidant capacity are prized by fewer consumers. EF were mostly acquired in supermarkets, cultivated at home or collected in the wild. In general, most participants (85%) consider the use of EF in gastronomy interesting, but less than one third (27%) believe we should eat EF more often. Finally, discriminant function analysis revealed that country was the variable for which the differences in the consumption of EF was more pronounced, while education level and age group showed the lowest variability between groups.

Fourier transform infrared spectroscopy (FTIR) with Attenuated Total Reflection (ATR) combined with functional data analysis (FDA) was applied to differentiate aged wine spirits according to the ageing technology (traditional using 250 L wooden barrels versus alternative using micro-oxygenation and wood staves applied in 1000 L stainless steel tanks), the wood species used (chestnut and oak), and the ageing time (6, 12, and 18 months). For this purpose, several features of the wine spirits were examined: chromatic characteristics resulting from the CIELab method, total phenolic index, concentrations of furfural, ellagic acid, vanillin, and coniferaldehyde, and total content of low molecular weight phenolic compounds determined by HPLC. FDA applied to spectral data highlighted the differentiation between all groups of samples, confirming the differentiation observed with the analytical parameters measured. All samples in the test set were differentiated and correctly assigned to the aged wine spirits by FDA. The FTIR-ATR spectroscopy combined with FDA is a powerful methodology to discriminate wine spirits resulting from different ageing technologies.

Food safety and diversification of agri-food products are increasingly important. A new spirit drink produced from the arbutus fruit (strawberry tree fruit) and honey was designed, taking advantage of the best features of these two ingredients and limiting the methanol content. This work reports the first approach to its development, considering in particular its chemical composition, especially the volatile components, and sensory properties. Methanol, acetaldehyde, ethyl acetate, and fusel alcohols were quantified and identified by GC–FID/GC–MS. Sensory analyses were performed by a trained panel. Promising results were obtained, showing that the new spirit has features close to those of honey spirit. Significantly lower contents of methanol, acetaldehyde, and ethyl acetate were observed in the new spirit compared to arbutus spirit (359.0 vs. 994.4 g/hL of pure alcohol (P.A.), 20.5 vs. 25.6 g/hL P.A., and 35.5 vs. 53.9 g/hL P.A., respectively), which is advantageous from the food safety and quality perspectives. The total content of fusel alcohols in the new spirit was significantly lower than in honey spirit (261.4 vs. 388.85 g/hL P.A.). Distinct aroma and flavor profiles were examined, but only four attributes were significantly different between the these spirit drinks: dried fruits, unctuous, varnish (although at very low perception), and sweet.

Predicting paper properties based on a limited number of measured variables can be an important tool for the industry. Mathematical models were developed to predict mechanical and optical properties from the corresponding paper density for some softwood papers using support vector machine regression with the Radial Basis Function Kernel. A dataset of different properties of paper handsheets produced from pulps of pine (Pinus pinaster and P. sylvestris) and cypress species (Cupressus lusitanica, C. sempervirens, and C. arizonica) beaten at 1000, 4000, and 7000 revolutions was used. The results show that it is possible to obtain good models (with high coefficient of determination) with two variables: the numerical variable density and the categorical variable species.

Paper properties determine the product application potential and depend on the raw material, pulping conditions, and pulp refining. The aim of this study was to construct mathematical models that predict quantitative relations between the paper density and various mechanical and optical properties of the paper. A dataset of properties of paper handsheets produced with pulps of Acacia dealbata, Acacia melanoxylon, and Eucalyptus globulus beaten at 500, 2500, and 4500 revolutions was used. Unsupervised classification techniques were combined to assess the need to perform separated prediction models for each species, and multivariable regression techniques were used to establish such prediction models. It was possible to develop models with a high goodness of fit using paper density as the independent variable (or predictor) for all variables except tear index and zero-span tensile strength, both dry and wet.

A total of 120 Acacia melanoxylon R. Br. (Australian blackwood) stem discs, belonging to 20 trees from four sites in Portugal, were used in this study. The samples were kraft pulped under standard identical conditions targeted to a Kappa number of 15. A Near Infrared (NIR) partial least squares regression (PLSR) model was developed for the Kappa number prediction using 75 pulp samples with a narrow Kappa number variation range of 10 to 17. Very good correlations between NIR spectra of A. melanoxylon pulps and Kappa numbers were obtained. Besides the raw spectra, also pre-processed spectra with ten methods were used for PLS analysis (cross validation with 48 samples), and a test set validation was made with 27 samples. The first derivative spectra in the wavenumber range from 6110 to 5440 cm-1 yielded the best model with a root mean square error of prediction of 0.4 units of Kappa number, a coefficient of determination of 92.1%, and two PLS components, with the ratios of performance to deviation (RPD) of 3.6 and zero outliers. The obtained NIR-PLSR model for Kappa number determination is sufficiently accurate to be used in screening programs and in quality control.

Wood samples of Cupressus arizonica, C. lusitanica, and C. sempervirens were evaluated for chemical, anatomical, and pulp characteristics as raw material for pulp production. Two 17-year-old trees per species were harvested, and wood samples were taken at a height of 2 m. Wood chips from Pinus pinaster (Portugal) and P. sylvestris (Finland) were used as references. C. arizonica differed from C. lusitanica and C. sempervirens with significantly lower (p < 0.05) tracheid diameter and wall thickness in the earlywood. The total extractives contents were 3.9%, 3.3%, and 2.5% for C. lusitanica, C. sempervirens, and C. arizonica, respectively, lower than the 5.1% for P. pinaster and 4.5% for P. sylvestris. Klason lignin content ranged from 33.0 to 35.6%, higher than the 28.0 to 28.7% for the pinewoods. The kraft pulp yields for C. arizonica, C. lusitanica, and C. sempervirens were 37.7%, 36.7%, and 38.7%, respectively, with kappa numbers of 32.0, 31.6, and 28.7, respectively; the yield values were 40.8% and 42.8%, with kappa numbers of 23.4 and 21.0, for P. pinaster and P. sylvestris, respectively. The cypress species are clearly different from pine in relation to wood pulping behavior. Among the cypress, C. sempervirens provided the best pulping results.

Ligustrum lucidum Aiton and its berries have been used in Chinese traditional medicine for around two thousand years. In the present study, L. lucidium berries harvested in two regions of Portugal were studied. Haemolytic activity and inhibition of oxidative haemolysis as well as the enzyme inhibitory activities (α-amylase enzyme and acetylcholinesterase) were assessed. Results suggest that the different biological activities varied according to the region where samples were collected. Results demonstrated that the sample obtained from region R1 was the most efficient extract for all parameters evaluated, presenting the lowest values of IC50, 10.67 ± 0.46 μg/mL for the inhibition of erythrocyte oxidative haemolysis, 58.28 ± 3.77 μg/mL for the α-amylase enzyme and 67.67 ± 2.10 μg/mL for the acetylcholinesterase inhibition. L. Lucidum berries may be an interesting source of compounds for use in the development of the therapeutic armamentarium for diseases where enzymatic disruption is believed to play a role.

A indústria florestal produz resíduos com características e potenciais de utilização muito distintos. Por um lado, a queima de biomassa florestal para obtenção de energia conduz à produção de grandes quantidades de cinzas como produto final e, por outro lado, durante o processo de produção da pasta de papel e na sequência do tratamento por causticação é também produzido um resíduo em quantidades significativas. O objectivo deste trabalho foi avaliar o potencial fertilizante destes dois resíduos, ou seja, das cinzas provenientes da incineração de biomassa florestal e das cinzas provenientes da causticação da pasta de papel, resíduos provenientes da indústria florestal. Num ensaio em vasos estudou-se a resposta do azevém à aplicação de doses crescentes destes resíduos que corresponderiam à aplicação ao solo de 0, 0,5, 1, 3 e 5 toneladas por ha. Verificou-se que a cinza de biomassa florestal pode ser aplicada ao solo, não se observando efeitos negativos na produção ou propriedades do solo. Esta aplicação conduzirá ao fornecimento de alguns nutrientes, nomeadamente K e Ca. Em solos com relação Ca/Mg elevada aconselha-se a aplicação simultânea de Mg. O resíduo proveniente da causticação da pasta de papel, deve ser incorporado no solo com antecedência relativamente à sementeira devido à sua causticidade. Nas culturas plurianuais não deverá ser utilizado. Apresentou valor como correctivo alcalinizante, possuindo elevado teor em Na que conduziu a um aumento significativo da condutividade eléctrica e do Na de troca, não se aconselhando uma aplicação em quantidades superiores a 1 t/ha.Forestry industry originates residues with distinct properties which can have also differences in its management reutilization. This study aimed at evaluating the fertilizer potential of forestry biomass burning ashes and causticizing lime mud from pulp and paper industry process, which are both residues from forestry industries. In a pot trial we evaluated the effect on ryegrass biomass production and on soil properties due to soil application of increasing amounts of the two forestry industry residues. These amounts corresponds to soil incorporation of 0, 0.5, 1, 3 and 5 t per ha of the residues. It was observed that ashes from biomass burning can be applied to soil without any negative effects, neither on productivity, nor on soil proprieties. This residue might supply some nutrients as K and Ca. In the case of soils with a high Ca to Mg ratio the simultaneous supply of ashes and Mg might be necessary. The other residue (causticizing lime mud) should be incorporated into soil long before seeding, due to its caustic effect. It should not be applied on perennial crops. As a fertilizer it might be used for alkali effect. As it has high Na content it induced a significant increase in electrical conductivity and exchangeable Na. Therefore, its application to soil should not be higher than 1 t per ha.

Aim of the study: The ability of NIR spectroscopy for predicting the ISO brightness was studied on unbleached Kraft pulps of Acacia melanoxylon R. Br. Area of study: Sites covering littoral north, mid interior north and centre interior of Portugal. Materials and methods: The samples were Kraft pulped in standard identical conditions targeted to a kappa number of 15. A Near Infrared (NIR) partial least squares regression (PLSR) model was developed for the ISO brightness prediction using 75 pulp samples with a variation range of 18.9 to 47.9 %. Main results: Very good correlations between NIR spectra and ISO brightness were obtained. Ten methods were used for PLS analysis (cross validation with 48 samples), and a test set validation was made with 27 samples. The 1stDer pre-processed spectra coupling two wavenumber ranges from 9404 to 7498 cm-1 and 4605 to 4243 cm-1 allowed the best model with a root mean square error of ISO brightness prediction of 0.5 % (RMSEP), a r2 of 99.5 % with a RPD of 14.7. Research highlights: According to AACC Method 39-00, the present model is sufficiently accurate to be used for process control (RPD ≥ 8)

Distilled spirits are usually made from fermented sugar-based materials, such as wines or fermented fruits, but other products can be used, namely berries or honey. In this work, an evaluation of honey spirits is done based on its physicochemical and sensory characteristics. Fourteen honey spirit samples of different brands of honey spirit were purchased at the market and from artisan Portuguese producers. Several analytical determinations, namely alcoholic strength, dry matter, density, total acidity, chromatic characteristics, methanol, acetaldehyde, ethyl acetate and higher alcohols were done to characterize all samples. The results pointed out several differences in physicochemical composition of samples. In general, these drinks are characterized by an alcohol strength between 37.4% and 53.0% and a low methanol content, quite null for most samples. Samples with higher ethanol content corresponded to the artisanal samples. Significant differences (p < 0.05) were also observed in the volatile composition and chromatic characteristics suggesting different production technologies. A first list of sensory attributes was obtained for this beverage. Therefore, further research must be done in order to characterize this spirit drink, which has gained market value.