Search

Cardiomyocytes, differentiated from induced pluripotent stem cells (iPSCs), have the potential to produce patient- and disease-specific pharmacological and toxicological platforms, in addition to their cardiac cell therapy applications. However, the lack of both a robust and a simple procedure for scalable cell substrate production is one of the major limitations in this area. Mimicking the natural healthy myocardium extracellular matrix (ECM) properties by altering the cell substrate properties, such as stiffness and chemical/biochemical composition, can significantly affect cell substrate interfacial characteristics and potentially influence cellular behavior and differentiation of iPSCs to cardiomyocytes. Here, we propose a systematic and biomimetic approach, based on the preparation of poly(dimethylsiloxane) (PDMS) substrates having the similar stiffness as healthy heart tissue and a well-defined surface chemistry obtained by conventional [(3-aminopropyl)triethoxysilane (APTES) and octadecyltrimethoxysilane (OTS)] and amino acid (histidine and leucine)-conjugated self-assembled monolayers (SAMs). Among a wide range of different concentrations, the 50:1 prepolymer cross-linker ratio of PDMS allowed adaptation of the myocardium stiffness with a Young's modulus of 23.79 +/- 0.61 kPa. Compared with conventional SAM modification, amino acidconjugated SAMs greatly improved iPSC adhesion, viability, and cardiac marker expression by increasing surface biomimetic properties, whereas all SAMs enhanced cell behavior, with respect to native PDMS. Furthermore, leucine-conjugated SAM modification provided the best environment for cardiac differentiation of iPSCs. This optimized approach can be easily adapted for cardiac differentiation of iPSCs in vitro, rendering a very promising tool for microfluidics, drug screening, and organ-on-chip platforms.

Cotton is widely used in various forms in textile industries, medical appliances, and different commercial materials and appropriate surface modification of cotton can greatly enhance its applicati...

BACKGROUND: Novel hybrid absorption coupled with membrane filtration technology is proposed for the recovery of oil from produced water. This study aims at developing a low cost superhydrophobic-superoleophilic kaolin-based hollow fiber ceramic membrane using phase inversion and sintering technique for the recovery of oil from synthetic produced water. The influence of different organosialanes, such as methyltriethoxysilane (MTES), octadecyltrimethoxysilane (OTMS), 1H,1H,2H,2H-perfluorooctyltriethoxysilane (FAS), trichloro(octadecyl)silane, and chlorotrimethylsilane, was investigated for the modification process. RESULTS: Field emission scanning electron microscopy results clearly indicated that membrane morphology was altered with coating of the organosilanes. The surface functionality of the organosilanes on kaolin membranes was also confirmed by X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. From the atomic force microscopy studies, membrane surface roughness was observed to be higher for MTES, FAS, and OTMS coated kaolin membranes. Contact analysis show that the membranes coated with MTES, FAS and OTMS organosilane agents possessed superhydrophobicity of 161.3°, 155.6°, and 150.2° as well as superoleophilicity of 0°, 1.5°, and 2.3°, respectively. CONCLUSION: Crude oil with a concentration of 2 g L−1 displayed a higher oil flux of 80 L m−2h−1 and absorption of 90% for MTES coated kaolin membrane. This study extends the frontier of knowledge in ceramic membrane application for produced water treatment.

Hypothesis: Surfactants are widely used in agri-sprays to improve pesticide efficiency, but the mechanism underlying their interactions with the surface wax film on plants remains poorly understood. To facilitate physical characterisations, we have reconstituted wheat cuticular wax films onto an optically flat silicon substrate with and without octadecyltrimethoxysilane modification to control surface hydrophobicity. Experiments: Imaging techniques including scanning electron microscopy (SEM) unravelled morphological features of the reconstituted wax films similar to those on leaves, showing little impact from the different substrates used. Neutron reflection (NR) established that reconstituted wax films were comprised of an underlying wax film decorated with top surface wax protrusions, a common feature irrespective of substrate hydrophobicity and highly consistent with what was observed from natural wax films. NR measurements, with the help of isotopic H/D substitutions to modify the scattering contributions of the wax and solvent, revealed different wax regimes within the wax films, illustrating the impact of surface hydrophilicity on the nanostructures within the wax films. Findings: It was observed from both spectroscopic ellipsometry and NR measurements that wax films formed on the hydrophobic substrate were more robust and durable against attack by nonionic surfactant C 12E 6 solubilised with pesticide Cyprodinil (CP) than films coated on the bare hydrophilic silica. Thus, the former could be a more feasible model for studying the wax-surfactant-pesticide interactions.

The physical properties of electronic devices made by 2,6-diphenyl anthracene (DPA) are influenced by the microtexture of DPA surfaces. This work focused on the experimental investigation of the 3-D surface microtexture of DPA thin films deposited on OTS (octadecyltrichlorosilane), HMDS (Hexamethyldisilasane), OTMS (octadecyltrimethoxysilane), and Si/SiO2 (300 nm SiO2 thickness) substrates with 5 and 50 nm thicknesses and 5 and 10 μm scan size. The thin film surfaces were recorded using atomic force microscopy (AFM) and their images were stereometrically analyzed to obtain statistical parameters, in accordance with ASME B46.1-2009 and ISO 25178-2: 2012. The results showed the effect of different manufacturing parameters on microtexture values where the granular structure is confirmed in all films. In addition, root mean square is increased by increasing the thickness from 5 to 50 nm for all types of substrates.

The stability of luminescent materials is a key factor for the practical application in white light-emitting diodes (LEDs). Poor chemical stability of narrow-band green-emitting RbLi(Li3 SiO4 )2 :Eu2+ (RLSO:Eu2+ ) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al2 O3 and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture-resistant dual-shelled RLSO:Eu2+ @Al2 O3 @ODTMS composite. The growth mechanisms of both the Al2 O3 inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water-stability of this narrow-band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu2+ @Al2 O3 @ODTMS is a promising candidate for the high-performance display backlights, and this dual-shelled strategy provides an alternative method to improve the moisture-resistant property of humidity-sensitive phosphors.

Cp2ZrCl2 was entrapped in dual-layered silica by two iterated nonhydrolytic sol-gel steps with organosilanes (methyltriethoxysilane, isopropyltriethoxysilane, octyltriethoxysilane, octadecyltrimethoxysilane) and WCl6 as modifiers. For comparative reasons, organic-inorganic hybrid one-layer systems were also synthesized. The hybrid systems were evaluated for ethylene polymerization, with methylaluminoxane (MAO) as the cocatalyst. Increasing catalytic activity was observed in the case of the dual-layered silica systems. Modification of the silica surface with octadecylsilane (C8-Si) in combination with the presence of added Lewis acid centers (W) afforded the highest catalytic activity among the systems tested. The presence of organosilanes on the silica surface may affect polyethylene polydispersity. In the case of dual systems, the presence of two distinct hybrid silica layer effects, an internal silica layer modified with C18-Si and an external layer with C8-Si moieties, impinged on the broadening of polydispersity. Inverse moieties have distinct polydispersity indexes that indicate the surface modification at internal/external silica layers affects polymer characteristics. Microstructural features of hybrid silicas determined by small-angle X-ray scattering indicate that a low number of neighbors and larger correlation distances could explain higher catalytic activities. Similarly, long carbon chains in organoalkoxysilanes tend to reduce the radii of second level particles in a hierarchical structure of dual-shell systems, which in turn leads to higher catalytic activity.

Solid wastes, such as polystyrene foam waste and silica gel waste which are ubiquitous products have caused serious environmental issues, such as “white pollution”, threatening the health of humans and animals. As such, the need to recycle and re-use of solid wastes has attracted increasing attention in the last few years. In this work, a self-healing superhydrophobic coating is successfully fabricated by blending polystyrene foam waste with fluorinated silica gel waste (F-silica gel waste), octadecyltrimethoxysilane (OTMS) modified silica particles (OTMS-silica particles), and near-infrared (NIR) light responsive microcapsules. The F-silica gel waste and OTMS-silica nanoparticles act as hydrophobic fillers meanwhile the polystyrene foam waste acts as a coating binder. The NIR-responsive microcapsules are obtained by the electrostatic adsorption of carbon nanoparticles onto the surface of microcapsules loaded with 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane. The superhydrophobic property of the coating can be healed after 10 minutes of NIR irradiation. Additionally, the as-prepared coating can be coated on several different substrates, similar to commercial coatings, and it is seen that its excellent superhydrophobic property is durable and is maintained even when the coating is subjected to a sand-drop test. The self-healing mechanism of the superhydrophobic coatings is also investigated.

BACKGOUND Membrane distillation (MD) is a promising low-cost and efficient desalination process, yet it has not been fully implemented at an industrial scale. Membrane wetting and low porosity are limiting factors leading to low water recovery rates. The current study involved the synthesis of membranes that combined high mechanical stability, porosity and superhydrophobicity, to prevent wetting, with high salt rejection and water flux. RESULTS Silica nanoparticles (SiO(2)NPs) were synthesized by a novel green chemistry procedure, modified with three different silane reagents [octadecyltrimethoxysilane, N-octadecyltrichlorosilane (ODTS) and chlorodimethyl-octadecyl silane] and finally embedded on polyvinylidene fluoride (PVDF) nanofibre membranes using an in-situ electrospinning technique. These modified membranes displayed a Young's modulus of similar to 43 MPa and showed highly porous properties (similar to 80% porosity, 1.24-1.41 mu m pore sizes) and superhydrophobic surfaces (contact angle >150(o)); thus possessing parameters falling within the range of highly recommended values in MD. Remarkably, the concentration of modified SiO(2)NPs used to produce the superhydrophobic PVDF nanofibre membranes was significantly lower (1% w/w) than those reported in the literature (3-4% w/w), clearly indicating the efficiency of these silane reagents. CONCLUSION Membranes embedded with ODTS-modified SiO(2)NPs were the most efficient; rejecting salts at high efficiencies (>99.9%) with water fluxes of approximate to 34.2 LMH at 60 degrees C, thus indicating their capacity as an energy-efficient process to produce high purity water. (c) 2019 Society of Chemical Industry

Secondary reactions of surface coating are of great importance and have drawn great attentions, since it can make the coating as a versatile platform for different uses via tailoring surface properties. A good example is the polydopamine (PDA) coating which has been widely used for preparation of various functional materials owing to its secondary reactions. In our recent study, we have developed hierarchical tannic acid (TA)-aminopropyltriethoxysilane (APTES) coating with distinct layer-nanospheres structure. Herein, the secondary reactions of the TA-APTES coating has been investigated in detail. And for the first time, various (TA-APTES)-based functional materials including superhydrophobic, adsorbent, and catalytic materials have been prepared for oil/water separation, dye adsorption, and 4-nitrophenol reduction, respectively. Significantly, under the same conditions, the performance of the (TA-APTES)-based functional materials is much better than that of the PDA-based materials: (a) The adsorptive capacity of the (TA-APTES)-based adsorbent toward rose bengal, methyl bule, orange G, and amaranthus red is 80.1%, 96.2%, 86.1%, and 98.6% higher than that of the PDA-based adsorbent, respectively; (b) The (TA-APTES)-based catalytic material can reduce about 98% of 4-NP in 10 min, while the PDA-based material can only reduce 60% of 4-NP under the same conditions; (c) After reacting with octadecyltrimethoxysilane, the TA-APTES coating can be directly transformed into superhydrophobic coating for oil/water separation, while the PDA coating is only hydrophobic and cannot separate oil/water mixture. The reasons for the significantly improved performance of the (TA-APTES)-based materials have been revealed. Our findings demonstrate that the TA-APTES coating can act as an outstanding platform for preparation of various functional materials with preferable performance, and the TA-APTES coating will be a promising substitute for PDA coatings.

Patterned arrays of nanoholes and nanorings were prepared using colloidal lithography combined with steps of solution immersion and vapor deposition of organosilanes. Samples prepared with colloidal lithography exhibit millions of reproducible test structures with a periodic arrangement throughout areas of the surface according to the dimensions and spacing of the particle mask. Views of the size and morphology of nanopatterns obtained with atomic force microscopy (AFM) can provide information of progressive steps of chemical reactions as nanostructures are grown within spatially confined areas surrounded by a resist film. A surface mask of colloidal latex or silica spheres was used to protect discrete areas of a Si(111) substrate from the deposition of organosilanes. When the mask was removed, the uncovered areas of the surface revealed regularly-shaped, small sites of uncovered substrate available for further reaction steps to build hierarchical surface structures. Nanostructures of zinc phthalocyanines (ZnPcs) were constructed using amine-terminated nanopatterns as sites for binding. Spatial selectivity was achieved for directing the attachment of ZnPcs to the surface using resist films of 2-methoxy(polyethyleneoxy)propyl]trichlorosilane (PEO-silane) and also with octadecyltrimethoxysilane (OTMS). The molecule chosen as a linker was (3-aminopropyl)triethoxysilane (APTES) which presents an amine group at the interface. In general, phthalocyanine molecules tend to bind in a coplanar orientation by physisorption to the surface and can stack together through pi-pi interactions between adjacent macrocycles. However, the nature of the substituents will also influence whether the molecules assemble on surfaces in a side-on orientation or with the macrocycle oriented in a coplanar arrangement. Hydroxyl and isothiocyanate pendant groups were attached to the macrocycles of ZnPcs chosen for this study, to investigate conformational differences when attached to APTES nanopatterns. The size and morphology of nanostructures was visualized and sensitively measured with tapping-mode AFM. The elastic response of samples patterned with ZnPc was mapped with force modulation AFM. Changes in the height of nanostructures indicate whether the macrocycles are oriented upright or parallel to the surface plane, or if multilayers were formed.

In the present work octadecyltrimethoxysilane (ODTMS) was deposited on mild steel in one and two-step treatments for corrosion resistance against a chloride medium (with and without sulphate reducing bacteria (SRB)). Electrochemical results showed that a hydrolysis of ODTMS for 3 h at pH 4 was sufficient for achieving a considerable enhancement in corrosion protection due to just one-step coating. However, corrosion resistance was found to be significantly superior due to the two-step treatment. The influence of the coating developed upon two-step treatment on the corrosion resistance of mild steel in the chloride solution containing SRB was assessed using comprehensive electrochemical analysis.

Textured growth of ZnO nanorods with no restriction of the substrate material is beneficial to their applications. The approaches to grow ZnO nanorods with texture are based on preparing suitable surface structure on the growth substrate, e.g. using a crystalline substrate with a specific surface structures or pre-depositing seed layers by high-temperature annealing of precursors. In the aqueous nutrient solution of the chemical bath deposition (CBD) process for ZnO growth, the concentration of Zn2+ ions at the extended hydrophobic surface is sufficiently high for forming self-assembly nuclei with a preferred orientation, resulting in the subsequent textured growth of ZnO nanorods. In this research, the hydrophobic surface is prepared by modifying Si surface with a self-assembly octadecyltrimethoxysilane (OTMS) monolayer. The formation mechanism of the nuclei on this hydrophobic surface for the textured growth of ZnO nanorods is investigated. It is shown that the nuclei form at the beginning of the CBD process and later transform into the Wurtzite structure to seed ZnO growth. An alternative approach to prepare seed layers is therefore involved in the aqueous CBD process, which is applicable to a range of hydrophobic substrates for textured growth of ZnO nanorods.

As a promising insulation material for HVDC cable, polypropylene (PP)-based nanocomposite shows excellent electrical properties under high operating temperature. The coupling agent plays an important role in the nanocomposite and may affect the high-temperature performance. In this paper, octyltrimethoxysilane and octadecyltrimethoxysilane were used to surface-modify MgO nanoparticles respectively. The PP/MgO nanocomposites were prepared and the surface-modification effect on electrical properties under 30 °C and 90 °C were investigated. The results show that deep traps were introduced in the nanocomposites by surface-modified MgO, whose density is proportional to the alkyl length of silane. Both PP/MgO nanocomposites show better electrical properties than pure PP. The nanocomposite with octadecyl-modified MgO shows the highest DC breakdown strength and lowest DC leakage current under 30 °C. Whereas octyl-modified PP/MgO nanocomposite performs better on these electrical properties under 90 °C. The reason of them may be correlated with the chemical stability of silane under high electric field and temperature. The work can be useful for selecting coupling agents in PP-based nanocomposite cable insulation considering high operating temperature.

Herein, light-responsive nanocarriers based on hollow mesoporous silica (HMS) nanoparticles modified with spiropyran-containing light-responsive copolymer (PRMS-FA) were fabricated via a simple self-assembly process. HMS modified with long-chain hydrocarbon octadecyltrimethoxysilane was an ideal base material owing to its good biocompatibility and drug capability. The spiropyran-containing amphiphilic copolymer could shift its hydrophilic–hydrophobic balance to become hydrophilic upon UV (λ = 365 nm) irradiation and then break away from the hydrophobic surface of the HMS core, followed by the uncaging and release of the pre-loaded anticancer drug. Simultaneously, the fluorescence resonance energy transfer (FRET) process based on the structural transformation of PRMS-FA was observed, which could act as a real-time monitor for the light-controlled drug release. Our model experiments in vitro tested and verified that this composite nanocarrier has good biocompatibility, active tumour targeting to the folate receptor over-expressed in tumour cells, is non-toxic to normal cells and that light-controlled drug release with real-time monitoring can be achieved.

A new multifunctional nanovehicle for tumor therapy and cell imaging was fabricated by coating NIR light-responsive polymers (HAMAFA-b-DDACMM) onto the surface of octadecyltrimethoxysilane (C18)-modified hollow mesoporous silica nanoparticles (HMS@C18) via self-assembly. First, the targeting NIR light-responsive block copolymer was synthesized by the RAFT living polymerization of [7-(didodecylamino) coumarin-4-yl] methyl methacrylate with hydroxyethylacrylate and N-(3-aminopropyl) methacrylamide hydrochloride and then grafted with folic acid (FA). The copolymers could be disrupted by excitation by a femtosecond NIR light laser (800 nm) via a two-photon absorption process due to the high two-photon absorption cross-section of the coumarin moiety. In order to enhance the drug loading capacity and biological stability of the nanovehicle, HMS nanoparticles modified by hydrophobic octadecyl chains were selected as the “core”, which had a considerable drug loading efficiency of more than 70%. Then the core–shell nanocomposites (HMS@C18@HAMAFA-b-DDACMM) were obtained by coating the amphiphilic copolymers onto the core via self-assembly. Under excitation by NIR light at 800 nm, the pre-loaded drugs could be released from the nanocomposites due to the degradation of the light-responsive copolymers and the release efficiency was correlated with the irradiation time and light power. The in vitro experiments indicated that the nanocomposites were easily targeted into the tumor cells that over-expressed folic acid receptor (FR(+)) such as KB cells by endocytosis. Furthermore, the copolymer itself had strong fluorescence, which could be used to track the process of drug delivery.

In this work, a two-stage methodology to design super-hydrophobic surfaces was proposed. The first step consists of creating a rough nano/micro-structure and the second step consists of reducing the surface energy using octadecyltrimethoxysilane. The surface roughening was realized by three different short-term pretreatments: (i) Boiling water, (ii) HNO3/HCl etching, or (iii) HF/HCl etching. Then, the surface energy was reduced by dip-coating in diluted solution of octadecyltrimethoxysilane to allow the formation of self-assembled silane monolayers on a 6082-T6 aluminum alloy surface. Super-hydrophobic aluminum surfaces were investigated by SEM-EDS, FTIR, profilometry, and contact and sliding angles measurements. The resulting surface morphologies by the three approaches were structured by a dual hierarchical nano/micro-roughness. The surface wettability varied with the applied roughening pretreatment. In particular, an extremely high water contact angle (around 180&deg, ) and low sliding angle (0&deg, ) were evidenced for the HF/HCl-etched silanized surface. The results of electrochemical tests demonstrate a remarkable enhancement of the aluminum alloy corrosion resistance through the proposed superhydrophobic surface modifications. Thus, the obtained results evidenced that the anti-wetting behavior of the aluminum surface can be optimized by coupling an appropriate roughening pretreatment with a self-assembled silane monolayer deposition (to reduce surface energy) for anticorrosion application.

ZSM-5-TiO2 composites are usually used as adsorbents as well as photocatalyst in waste treatment. However, these composites are less effective insoluble waste treatment, so it needs to modify by adding organic substances that can react with the waste. In this study, Octadecyltrimethoxysilane (OTMS) was added to the surface of the ZSM-5-TiO2 composite. The effect of addition OTMS on morphology ZSM-5-TiO2 composite was studied. ZSM-5-TiO2-OTMS composite was characterized by X-Ray Diffraction (XRD), Fourier Transformation Infrared Spectroscopy (FTIR), and Energy Dispersive X-ray Scanning Electron Microscopy (SEM-EDX). ZSM-5-TiO2-OTMS shows a carbon-related peak at 2900 and 1470 cm−1 that can be ascribed as C-H stretching and C-O stretching vibration respectively from FTIR spectra. ZSM-5-TiO2-OTMS composite retains the hexagonal shape surrounded by round-shaped. The addition of OTMS affects the morphology of the ZSM-5-TiO2 composite. The more OTMS is added, the morphology of the ZSM-5-TiO2-OTMS composite to be more irregular than composite ZSM-5-TiO2. It also affects the amount of carbon content that is distributed on the surface of the ZSM-5-TiO2 composite. This provides information material that can be used in synthesize catalysts in the insoluble waste treatment.

The present investigation deals with the surface modification of sub-micrometer boron particles with octadecyltrimethoxysilane (OTMS, a silane compound) to improve the dispersion stability of boron...

International audience; ure continues to inspire scientists to adapt solutions in order to satisfy human needs, mainly in the maritime domain with metallic surface corrosion and its mechanical friction. In this research, the source of innovation comes from the lotus leaf and its well-known super-hydrophobicity. In this study, we have investigated the lotus leaf as a model for a super-hydrophobic maritime surface. The hydrothermal technique, which is considered to be a simple, low-cost, and scalable coating method, is applied to create zinc oxide (ZnO) nanorods (NRs), and an evaporation method is used to apply octadecyltrimethoxysilane (ODS). We apply such eco-green coatings onto commercial epoxy paints. Superhydrophobic surfaces (SHS) are obtained on maritime aluminum substrates. The characterization of SHS indicates improved behavior of water droplets on the treated surface: higher water static contact angles (WCA) from 98° to more than 152° and reduced sliding angles (SA) from 46° to 7°. Sliding speeds (SS) have been largely raised from 54 in the epoxy case to 1300 mm·s-1 after treatment. These results clearly demonstrate the real opportunity to apply ZnO-based nanomaterials onto existing commercial maritime coatings.

A miniaturized solid-phase method was proposed for the extraction of aflatoxin M1 and B1 from milk and jujube samples. Target analytes were identified by ultra high performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry in positive mode. The main factors that affected the extraction ability and sensitivity of the analytical method were evaluated in detail. In the optimal conditions, 30 mg of silica particles functionalized with octadecyltrimethoxysilane and methanol were used as sorbent and desorption solvent in miniaturized solid-phase extraction, respectively. The calibration curves for aflatoxin B1 and M1 showed good linearity (r2 > 0.9921) within linear ranges. The limit of detection (S/N = 3) were determined to be 0.049 and 0.023 μg/kg for aflatoxin M1 and B1, respectively. In addition, the good spiked recoveries were obtained ranging from 88.24 to 105.35%. The results demonstrated that the proposed method had significant advantages including simple, inexpensive, rapid, and accurate, which considered as a suitable method for the trace analysis of aflatoxins.

Phospholipid monolayers at oil-water interfaces are often obtained via vesicle adsorption. However, the interaction mechanisms of vesicles with these oil-water interfaces remain unclear. Herein, we studied the adsorption of giant unilamellar vesicles (GUVs) of approximately 2-5 μm diameter onto silicone oil-water interfaces and glass surfaces modified with hexamethyldisilazane (HMDS) and octadecyltrimethoxysilane (ODTMS) using fluorescence microscopy. The GUVs exhibited various modes of interaction, adsorbing on the silanized glass surfaces without sizable deformation, whereas GUVs bound to the silicone oil-water interface exhibited large deformation. After adsorption, GUV rupture occurred within 350, 110, and 3 ms on HMDS-modified glass, ODTMS-modified glass, and silicone oil-water interface, respectively. On glass surfaces, GUV rupture was often initiated and proceeded with pore formation near the surface. The monolayer patches formed by GUV rupture on HMDS-modified glass remained for at least 1 h over an area approximately twice of that estimated from the original GUV. On the ODTMS-modified glass and silicone oil surfaces, the monolayer patch structures disappeared in milliseconds owing to lipid diffusion across the interface. When adsorbed on the oil-water interface, the GUVs spontaneously underwent dynamic shape changes, internal vesicle formation, and desorption without rupture. Thus, it can be concluded that these different pathways arose from different lipid-surface affinities.

[EN] Herein, a novel drug photorelease system based on gold nanostars (AuNSts), coated with a mesoporous silica shell and capped with paraffin as thermosensitive molecular gate, is reported. Direct measurements of the surface temperature of a single gold nanostar irradiated using a tightly focused laser beam are performed via a heat sensitive biological matrix. The surface temperature of a AuNSt increases by hundreds of degrees (degrees C) even at low laser powers. AuNSts coated with a mesoporous silica shell using a surfactant-templated synthesis are used as chemotherapeutic nanocarriers. Synthetic parameters are optimized to d avoid AuNSt reshaping, and thus to obtain nanoparticles with suitable and stable plasmonic properties for near-infrared (NIR) laser-triggered cargo delivery. The mesoporous silica-coated nanostars are loaded with doxorubicin (Dox) and coated with octadecyltrimethoxysilane and the paraffin heneicosane. The paraffin molecules formed a hydrophobic layer that blocks the pores, impeding the release of the cargo. This hybrid nanosystem exhibits a well-defined photodelivery profile using NIR radiation, even at low power density, whereas the nonirradiated sample shows a negligible payload release. Dox-loaded nanoparticles displayed no cytotoxicity toward HeLa cells, until they are irradiated with 808 nm laser, provoking paraffin melting and drug release. Hence, these novel, functional, and biocompatible nanoparticles display adequate plasmonic properties for NIR-triggered drug photorelease applications., The authors gratefully acknowledge financial support from the Spanish Government (Projects AGL2015-70235-C2-2-R and MAT2015-64139-C4-1-R), the Generalitat Valenciana (Project PROMETEOII/2014/047), and European Union (Programme European Union Action 2 Erasmus Mundus Partnerships, Grant-2014-0870/001-001). A. Samadi and L. B. Oddershede acknowledge financial support from the Novo Nordisk Foundation (NNF14OC0011361) and from the Danish National Research Foundation (DNRF116). A. H. Montoto thanks Erasmus Mundus Programme for his PhD scholarship at EurolnkaNet project. The authors thank UPV electron microscopy and CIPF confocal and electron microscopy services for technical support.

A superhydrophobic CeO2-modified kapok fiber (SCMKF) was fabricated using CeO2 and octadecyltrimethoxysilane (OTMS) by a simple chemical deposition method. Scanning electron microscopy, Fo...

A simple and effective approach for vertical alignment of liquid crystals (LCs) over a functionalized transparent flexible substrate is described. Surface characterization of this commercially available plastic substrate through X-ray photoelectron spectroscopy (XPS) and attenuated total reflection infrared spectroscopy (ATR-IR) indicated that cellulose acetate is main component of the transparent substrate. This substrate was chemically functionalized with a suitable LC compound. A trimethoxysilane terminated new rod-shaped mesogen is synthesized and covalently attached to the pre-treated film through silane condensation reaction. LC functionalization of the polymer film is confirmed through contact angle (CA), atomic force microscopy (AFM), XPS and ATR-IR spectroscopy studies. Versatility of the LC modified flexible substrates for the alignment of bulk LC sample at substrate-LC interface was assessed for nematic (N) and smectic A (SmA) phases. Remarkably, LC functionalized cellulose acetate films were found to be highly efficient in assisting a perfect homeotropic alignment of LCs (for both, a room temperature N and a high temperature SmA phase) over the entire area of the LC sample under observation indicating their superior aligning ability in comparison to their unmodified and octadecyltrimethoxysilane (OTS) modified counterparts. The demonstrated method of surface modification of flexible polymer film is easy, surface modified substrates are stable for several months, retained their aligning ability intact and more importantly they are reusable with maximum delivery.

Hollow mesoporous silica nanoparticles (HMSNs) with different dispersities, mesoporous structures and particle sizes have been systematically synthesized by simply changing the octadecyltrimethoxysilane (C18TMS, mesopore-forming agent) percentage of the total silica sources over a wide range. The effects of the C18TMS percentage on the dispersity, mesoporous structure and particle size of HMSNs have been discussed in detail based on elaborate structure characterization. In addition, the volume of the core-etching agent and etching time have been adjusted carefully to further modulate the mesoporous structure of HMSNs. Encouragingly, the obtained HMSNs show excellent performance in removing organic pollutants with short equilibrium adsorption time, high adsorption capacity and outstanding recyclability. It is believed that these prepared HMSNs with different dispersities, mesoporous structures and particle sizes possess the potential to be used in many fields.

A novel superhydrophobic octadecyltrimethoxysilane (OTMS)-modified composite membrane was fabricated by incorporating recycled carbon black (CB) into a polyvinylidene fluoride (PVDF) membrane. Waste tires have been treated with extraction and high-temperature calcination to obtain recycled CB. After incorporating CB into the PVDF solution, a steep increase of 18–20% was observed in the loss and storage moduli. CB was observed to be an ideal filler for doping the PVDF solution to enhance the mechanical properties of the material. OTMSs are known for their low surface energy, which improves hydrophobicity. Moreover, OTMSs were found to be ideal agents for enhancing the superhydrophobicity of PVDF membranes. The results of surface treatment with OTMS, CB loading, particle size, and membrane properties and their effect on desalination performance were thoroughly studied. The composite membrane was observed to be superhydrophobic with a contact angle of 160° and exhibited high desalination performance in terms of permeate water flux and salt rejection. The fabricated membrane has been reused after physical cleaning in order to analyse the anti-wetting and long-term performance.

Superhydrophobic membranes are essential for improved seawater desalination. This study presents the successful casting of a three-layered membrane composed of a top superhydrophobic coating onto a polypropylene (PP) mat through simple sol-gel processing of octadecyltrimethoxysilane (OTMS), and the bottom layer was casted with hydrophilic poly(vinyl alcohol) (PVA) by using a knife casting technique; this membrane represents a novel class of improved-performance membranes consisting of a top superhydrophobic coating onto a hydrophobic PP mat and a hydrophilic layer (PVA) at the bottom. OTMSs are well known low-surface-energy materials that enhance superhydrophobicity, and they were observed to be the ideal chemical group for increasing the hydrophobicity of the PP mat. The PVA layer acted as base layer absorbing the condensed vapor and thus enhancing the vapor flux across the membrane. The hybrid three-layered membrane exhibited superhydrophobicity, with an average contact angle of more than 160°, and demonstrated high performance in terms of rejection and water flux. This study also examined the pore size distribution, surface roughness, surface area, tensile strength, water flux, and salt rejection of the fabricated membrane. The salt rejection level was calculated to be 99.7%, and a high permeate flux of approximately 6.7 LMH was maintained for 16 h.

With unique and efficient narrow-band red emission and broadband blue light absorption characteristics, Mn4+-activated fluoride red phosphors have gained increasing attention in warm white LEDs (WLEDs) and liquid crystal display (LCD) backlighting applications, whereas the intrinsic hygroscopic nature of these phosphors have inevitably limited their practical applications. Herein, a waterproof narrow-band fluoride phosphor K2TiF6:Mn4+ (KTF) has been demonstrated via a facile superhydrophobic surface-modification strategy. With the use of superhydrophobic surface modification with octadecyltrimethoxysilane (ODTMS) on KTF surfaces, the moisture-resistance performance and thermal stability of the phosphor KTF can be significantly improved. Meanwhile, the absorption, and quantum efficiency did not show obvious changes. The surface-modification processes and mechanism, as well as moisture-resistance performances and luminescence properties, of the phosphors have been carefully investigated. It was found that the luminous efficiency (LE) of the modified KTF was maintained at 83.9% or 84.3% after being dispersed in water for 2 h or aged at high temperature (85 °C) and high humidity (85%) atmosphere (HTHH) for 240 h, respectively. The WLEDs fabricated with modified KTF phosphor showed excellent color rendition with lower color temperature (2736 K), higher color rendering index (CRI, Ra = 87.3, R9 = 80.6), and high luminous efficiency (LE = 100.6 lm/W) at 300 mA. These results indicate that hydrophobic silane coupling agent (SCA) surface modification was a promising strategy for enhancing moisture resistance of humidity-sensitive phosphors, exhibiting great potential for practical applications.

A novel immobilized enzyme reactor was developed as prototypes for biosynthetic purposes and the performance in the phosphatidylserine (PS) synthesis was evaluated. Phospholipase D (PLD) was immobilized into ordered mesoporous silica cube (OMSC) modified with octadecyltrimethoxysilane (-C18). The modified OMSC with immobilized PLD (OMSC-C18-PLD) preserved more than 90 % of its activity after incubation at 40 ℃ for 2 h, while the free enzyme showed only 23.25 % of its maximum activity. OMSC-C18-PLD could achieve 91.2 % PS conversion and less than 5 % hydrolysis reaction within 9 h, and still maintain more than 30 % enzyme activity after 9 consecutive runs. The catalytic efficiency (CE) of free and immobilized enzyme were 24.24 μmol / (g h) and 35.87 μmol / (g h), respectively. The half-life period of enzyme increased from 25 days to 40 days after immobilization. Transphosphatidylation reaction catalyzed by OMSC-C18-PLD approved its practical applications in the phosphatidylserine synthesis.

Three-dimensional porous sponge has been demonstrated as an outstanding candidate in oil/water separation due to its hydrophobicity and oleophilicity that originates from the synergistic effect of rough structure and low surface energy, but the separation process has not been illuminated clearly. This paper presents the study of the synthesis of oil/water separation sponge, mechanism of separation process and establishment of kinetic model, via the combination among dopamine chemistry, covalent modification, theoretical analysis, experimental results and mathematical model. Results show that both the dopamine deposition time and the octadecyltrimethoxysilane hydrolysis system significantly affect the hydrophobicity of the modified-melamine sponge and that the oil/water separation process is composed of six scenarios with different physical state. Furthermore, with the experimental results, established iso-potential separation model and the height-quantized model, we conclude that the time-dependent separation patterns and kinetics are subjected to the modulation of the viscosity of the separated substance and the immersion depth of the sponge.

Nanoscience and nanotechnology present ubiquitous possibilities in almost any scientific field because of property enhancement occurring in nanoparticles with unique size and shape. The physicochemical characteristics of nanoparticles play an imperative role in their prospective applications. This article reports an in-depth study on the variance of the physicochemical characteristics, the methane decomposition activity, and the sustainability of nano-NiO/SiO 2 ( n- NiO/SiO 2 ) catalysts with different preparation parameters. The influence of nickel/silicate ratio, octadecyltrimethoxysilane (C18TMS)/tetraethylorthosilicate (TEOS) ratio, and of different solvents was investigated. The characteristic features of the prepared catalysts were inspected using N 2 adsorption–desorption measurements, X-ray diffraction, hydrogen temperature-programmed reduction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and methane cracking catalytic activity in a fixed bed reactor. Methane decomposition activity was evaluated by measuring the instantaneous hydrogen production (vol %) and carbon yield (%) at the end of the examination. The results showed that C18TMS has extensively improved the microporosity of the material, hence resulting in the improvement of the catalytic performance. The microporosity of the n- NiO/SiO 2 catalyst has increased from 10.7% to 26.8% when the quantity of C18TMS was increased from 0 to 1.2 mL in the synthesis mixture. Catalysts prepared with a maximum quantity of C18TMS and a minimum quantity of tetraethylorthosilicate exhibited a minimum activity loss of 17.46%.

Hybrid sodalite zeolites were produced by grinding, homogenizing and heating the reactants, including different organosilanes, without the addition of solvent (water). Hybrid sodalite zeolites were produced in the presence of triethoxy(octyl)silane (C8Si), 3-chloropropyltrimethoxysilane, triethoxymethylsilane, hexamethyldisiloxane, octadecyltrimethoxysilane (ODS) and chlorotrimethylsilane. The resulting hybrid zeolites were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, water contact angle, small-angle X-ray scattering and thermogravimetric analysis. The presence of 6 wt.-% of organosilane introduced in the reaction medium caused no disturbance to the crystal growth. All materials exhibited dense, spherical and uniform particles, with slightly rough surfaces according to SAXS measurements. In the case of octadecylsilane, it appears that the alkyl chains are well packaged and organized, while for octylsilane, a more disordered structure seems to be present. Only organosilanes with longer alkyl chains (C8Si and ODS) show hydrophobic properties. The solvent-free method proved to be effective in synthesizing samples with good crystallinity and hydrophobic characteristics. This synthesis method was shown to be efficient, fast, economical and environmentally friendly.

Mesoporous silica nanoparticles (MSN) with tunable pore size have been proved to be excellent potential in molecular-related applications. Herein, in this study, we designed to synthesize MSN with tunable pore size by varying the n -octadecyltrimethoxysilane (C 18 TMS)/tetraethylorthosilicate (TEOS) molar ratio or the ethanol (EtOH)/H 2 O volume ratio in a water-ethanol-ammonia system, where C 18 TMS acted as structure-directing agent, TEOS as silica source, ammonia as catalyst, EtOH and H 2 O as solvents. The as-obtained MSN were characterized by the scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N 2 adsorption-desorption analysis. The results showed that the as-synthesized MSN possessed spherical morphology with diameter ranging from 100 to 200 nm, and the pore size of MSN could be easily tailored from 2.4 to 6.5 nm simply by varying the C 18 TMS/TEOS molar ratio from 0.32 to 0.74 and the EtOH/H 2 O volume ratio from 3.6 to 7.5. Meanwhile, the pore volume also could be adjusted from 0.6 to 1.0 cm 3 /g by this strategy. These results suggested that our strategy could effectively enlarge and adjust the mesopores of the MSN. We supposed our approach may provide a platform of nanotechnology for preparation of porous silica materials with adjustable mesopores which would be great potential in practical applications where different sizes of molecules were involved.

The dependence of performance on the dielectric-semiconductor interface in pentacene-based organic field-effect transistors (OFETs) was investigated by modification of the substrate with octadecylsilane (OTS) compared with octadecyltrimethoxysilane (OTMS). The hole mobility of OFETs was enhanced from 0.43 cm2/V s to 0.72 cm2/V s when treating the substrate with OTMS versus OTS. However, the subsequent ammonia vapor did not lead to enhanced FET performance, which might be closely related to its negative influence on the pentacene growth. According to atomic force microscopy (AFM) and X-ray diffraction (XRD) measurements, flat pentacene domains with larger grain sizes and less crystal boundaries were observed for the OTS treated surface, demonstrating higher crystallinity, which may play a positive role for the charge transport and thus accounts for the improved mobility.

Diatomaceous earth (DE) was modified with octadecyltrimethoxysilane (C18-TMS) in the presence of p-toluenesulfonic acid (PTSA) as an acid catalyst. However, in the presence of a non-volitile acid catalyst, the determination of the adsorbed amount of the C18-TMS is complicated. Silanol groups on DE allowed the sulfonate groups on PTSA to attach to the surfaces and these surface-adsorbed acid groups stayed on the surfaces until higher temperatures. These temperatures were similar to where the decomposition of the C18-TMS silane occurred. We propose a model for the estimation of the amount of C18-TMS silane under "no-rinse" conditions based on the co-adsorption of the acid and silane. Both the acid and silane adsorb on the surface with the silane preferentially adsorbing and the PTSA filling the remainder of the surface sites. This model allows the accurate determination of the amounts of C18-TMS on DE.

The possibility and conditions for the formation of nano- or submicrocapsules loaded with hydrophobic active ingredients (alkoxysilanes) into the matrix of coatings with self-lubricating effect are considered. The optimal composition of the alkoxysilane submicrocapsules, and their physicochemical properties were determined. The longer the radical chain length is, the lower is the rate of hydrolysis, and, accordingly, the more stable is the formed emulsion. The methods of laser correlation spectroscopy in measuring the size and zeta potentials of the submicrocapsules with different loads of the active agent allowed to determine the optimal ratios of the active ingredients. The optimal concentration of the active agent is between 4 and 9%. Based on contact angle studies, octadecyltrimethoxysilane was selected as optimum compound. The introduction of 4 wt% of octadecyltrimethoxysilane reduces the friction coefficient of coatings by 20–30% under vibrating motion and by 15–20% under continuous motion. The data obtained can also be useful for the encapsulation of other hydrophobic active agents and for various other purposes, for example, for the introduction of biocidal agents.

A new bent-core liquid crystal (LC) compound 4-Cyano-1,3-phenylenebis[4-(4-(S)-2-Dodecyloxypropionyloxyphenoxycarbonyl)benzoate] (CyPDB) consisting of O-dodecyl lactate substituted terephthalate based rod-like units which were located at 1,3-positions of 4-cyanoresorcinol central unit has been synthesized and LC/1.0% modified Fe3O4 nanocomposite has been prepared. The effects of being the doped with 1.0% modified Fe3O4 (magnetite) nanoparticles on mesomorphic properties of the new bent-core liquid crystal, which exhibits an enantiotropic SmA phase with a ferroelectric-like switching, were investigated by differential scanning calorimetry, optical polarizing microscopy and electro-optic studies. The surface of Fe3O4 (magnetite) nanoparticles was modified with a silane surfactant, octadecyltrimethoxysilane (OTMS), used as a compatibilizer for the attractive interaction of liquid crystal molecule with Fe3O4 nanoparticles. The size, morphology and distribution of modified Fe3O4 (magnetite) nanoparticles in LC host were investigated by using Transmission Electron Microscope (TEM) and Scanning Electron Microscopy (SEM). The magnetic properties of nanocomposite were studied using a vibrating-Sample Magnetometer (VSM).

In recent years, various slippery liquid-infused porous surfaces (SLIPSs) have been reported in protection of various materials. However, these SLIPSs are restricted to specific substrates, complicated fabrication process and poor durability. Herein, natural attapulgite (APT) with existing micro-nano porous structure was selected as raw material, avoiding complex hole making process involved in the traditional SLIPSs preparation. Subsequently, a robust superhydrophobic surface (SHS) was successfully fabricated by one-step process via manipulation of both the surface roughness and surface energy through spraying suspension containing attapulgite (APT) and octadecyltrimethoxysilane (OTMS) on desired substrates. Besides, inorganic aluminum phosphate (AP) binder was selected as a building block to improve the adhesive strength between the APT and the substrates. Finally, the SLIPSs were fabricated successfully after infused the SHSs with silicone oil, which showed superior liquid repellency, anti-corrosion, anti-icing performance with intensified durability compared with the original SHSs. This facile method can be applied to protect various materials without the restriction of specific substrates, which is essential to guide the manufacture of SLIPS and expand potential applications in engineering.