Search

Despite the attractive combinations of cell/surface interactions, biocompatibility, and good mechanical properties of Ti-6Al-4V, there is still a need to enhance the early stages of cell/surface integration that are associated with the implantation of biomedical devices into the human body. This paper presents a novel, easy and reproducible method of nanoscale and nanostructured hydroxyapatite (HA) coatings on Ti-6Al-4V. The resulting nanoscale coatings/nanostructures are characterized using a combination of Raman spectroscopy, scanning electron microscopy equipped with energy dispersive x-ray spectroscopy. The nanostructured/nanoscale coatings are shown to enhance the early stages of cell spreading and integration of bone cells (hFOB cells) on Ti-6Al-4V surfaces. The improvements include the acceleration of extra-cellular matrix, cell spreading and proliferation by nanoscale HA structures on the coated surfaces. The implications of the results are discussed for the development of HA nanostructures for the improved osseointegration of Ti-6Al-4V in orthopedic and dental applications., (© 2024 Wiley Periodicals LLC.)

This study presents LHRH conjugated drug delivery via a magnetite nanoparticle-modified microporous Poly-Di-Methyl-Siloxane (PDMS) system for the targeted suppression of triple-negative breast cancer cells. First, the MNP-modified PDMS devices are fabricated before loading with targeted and untargeted cancer drugs. The release kinetics from the devices are then studied before fitting the results to the Korsmeyer-Peppas model. Cell viability and cytotoxicity assessments are then presented using results from the Alamar blue assay. Apoptosis induction is then elucidated using flow cytometry. The in vitro drug release studies demonstrated a sustained and controlled release of unconjugated drugs (Prodigiosin and paclitaxel) and conjugated drugs [LHRH conjugated paclitaxel (PTX+LHRH) and LHRH-conjugated prodigiosin (PG+LHRH)] from the magnetite nanoparticle modified microporous PDMS devices for 30 days at 37 °C, 41 °C, and 44 °C. At 24, 48, 72, and 96 h, the groups loaded with conjugated drugs (PG+LHRH and PTX+LHRH) had a significantly higher ( p < 0.05) percentage cell growth inhibition than the groups loaded with unconjugated drugs (PG and PTX). Additionally, throughout the study, the MNP+PDMS (without drug) group exhibited a steady rise in the percentage of cell growth inhibition. The flow cytometry results revealed a high incidence of early and late-stage apoptosis. The implications of the results are discussed for the development of biomedical devices for the localized and targeted release of cancer drugs that can prevent cancer recurrence following tumor resection.

Triple-negative breast cancer (TNBC) treatment is challenging and frequently characterized by an aggressive phenotype and low prognosis in comparison to other subtypes. This paper presents fabricated implantable drug-loaded microporous poly-di-methyl-siloxane (PDMS) devices for the delivery of targeted therapeutic agents [Luteinizing Hormone-Releasing Hormone conjugated paclitaxel (PTX-LHRH) and Luteinizing Hormone-Releasing Hormone conjugated prodigiosin (PG-LHRH)] for the treatment and possible prevention of triple-negative cancer recurrence. In vitro assessment using the Alamar blue assay demonstrated a significant reduction (p < 0.05) in percentage of cell growth in a time-dependent manner in the groups treated with PG, PG-LHRH, PTX, and PTX-LHRH. Subcutaneous triple-negative xenograft breast tumors were then induced in athymic female nude mice that were four weeks old. Two weeks later, the tumors were surgically but partially removed, and the device implanted. Mice were observed for tumor regrowth and organ toxicity. The animal study revealed that there was no tumor regrowth, six weeks post-treatment, when the LHRH targeted drugs (LHRH-PTX and LHRH-PGS) were used for the treatment. The possible cytotoxic effects of the released drugs on the liver, kidney, and lung are assessed using quantitative biochemical assay from blood samples of the treatment groups. Ex vivo histopathological results from organ tissues showed that the targeted cancer drugs released from the implantable drug-loaded device did not induce any adverse effect on the liver, kidneys, or lungs, based on the results of qualitative toxicity studies. The implications of the results are discussed for the targeted and localized treatment of triple negative breast cancer., (© 2024. The Author(s).)

The paper presents the results of the experimental and analytical study of targeted drug-loaded polymer-based microspheres made from blend polymer of polylactic-co-glycolic acid and polycaprolactone (PLGA-PCL) for targeted and localized cancer drug delivery. In vitro sustained release with detailed thermodynamically driven drug release kinetics, over a period of three months using encapsulated targeted drugs (prodigiosin-EphA2 or paclitaxel-EphA2) and control drugs [Prodigiosin (PGS), and paclitaxel (PTX)] were studied. Results from in vitro study showed a sustained and localized drug release that is well-characterized by non-Fickian Korsmeyer-Peppas kinetics model over the range of temperatures of 37 °C (body temperature), 41 °C, and 44 °C (hyperthermic temperatures). The in vitro alamar blue, and flow cytometry assays in the presence of the different drug-loaded polymer formulations resulted to cell death and cytotoxicity that was evidence through cell inhibition and late apoptosis on triple negative breast cancer (TNBC) cells (MDA-MB 231). In vivo studies carried out on groups of 4-week-old athymic nude mice that were induced with subcutaneous TNBC, showed that the localized release of the EphA2-conjugated drugs was effective in complete elimination of residual tumor after local surgical resection. Finally, ex vivo histopathological analysis carried out on the euthanized mice revealed no cytotoxicity and absence of breast cancer metastases in the liver, kidney, and lungs 12 weeks after treatment. The implications of the results are then discussed for the development of encapsulated EphA2-conjugated drugs formulation in the specific targeting, localized, and sustain drug release for the elimination of local recurred TNBC tumors after surgical resection., (© 2023. The Author(s).)

This study investigates the compressive deformation and the effect of structural architecture on the compressive strength of bioprocessed mycelium biocomposites reinforced with laterite particles. In the mycelium blocks, lignocellulosic hemp hurds function as reinforcing and nutritional substrates. The mycelium acts as a supportive matrix, binding the hemp hurds and the laterite particles which are integrated for further reinforcement to improve the compressive strength of the composite. The compressive behavior of the composites is elucidated using a combined approach of experimental and theoretical studies. The deformation mechanisms are investigated via in-situ observations of the specimens under uniaxial compressive loading. The experiments show that the compressive deformation results in progressive micro-buckling in slender specimens, whereas thicker samples exhibit a soft elastic response at small strain levels followed by continuous stiffening at larger strains. Based on the experimental observations and the morphological characterization, a column buckling analysis was developed for the mycelium-hemp composites to further explain the observed deformation phenomena., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Irregular biomechanics are a hallmark of cancer biology subject to extensive study. The mechanical properties of a cell are similar to those of a material. A cell's resistance to stress and strain, its relaxation time, and its elasticity are all properties that can be derived and compared to other types of cells. Quantifying the mechanical properties of cancerous (malignant) versus normal (non-malignant) cells allows researchers to further uncover the biophysical fundamentals of this disease. While the mechanical properties of cancer cells are known to consistently differ from the mechanical properties of normal cells, a standard experimental procedure to deduce these properties from cells in culture is lacking. This paper outlines a procedure to quantify the mechanical properties of single cells in vitro using a fluid shear assay. The principle behind this assay involves applying fluid shear stress onto a single cell and optically monitoring the resulting cellular deformation over time. Cell mechanical properties are subsequently characterized using digital image correlation (DIC) analysis and fitting an appropriate viscoelastic model to the experimental data generated from the DIC analysis. Overall, the protocol outlined here aims to provide a more effective and targeted method for the diagnosis of difficult-to-treat cancers.

This article presents silica nanoparticles for the sustained release of AMACR antibody-conjugated and free doxorubicin (DOX) for the inhibition of prostate cancer cell growth. Inorganic MCM-41 silica nanoparticles were synthesized, functionalized with phenylboronic acid groups (MCM-B), and capped with dextran (MCM-B-D). The nanoparticles were then characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, zeta potential analysis, nitrogen sorption, X-ray diffraction, and thermogravimetric analysis, before exploring their potential for drug loading and controlled drug release. This was done using a model prostate cancer drug, DOX, and a targeted prostate cancer drug, α-Methyl Acyl-CoA racemase (AMACR) antibody-conjugated DOX, which attaches specifically to AMACR proteins that are overexpressed on the surfaces of prostate cancer cells. The kinetics of sustained drug release over 30 days was then studied using zeroth order, first order, second order, Higuchi, and the Korsmeyer-Peppas models, while the thermodynamics of drug release was elucidated by determining the entropy and enthalpy changes. The flux of the released DOX was also simulated using the COMSOL Multiphysics software package. Generally, the AMACR antibody-conjugated DOX drug-loaded nanoparticles were more effective than the free DOX drug-loaded formulations in inhibiting the growth of prostate cancer cells in vitro over a 96 h period. The implications of the results are then discussed for the development of drug-eluting structures for the localized and targeted treatment of prostate cancer., (© 2022 Wiley Periodicals LLC.)

This paper presents the results of an experimental and computational study of the effects of laser-induced heating provided by magnetite nanocomposite structures that are being developed for the localized hyperthermic treatment of triple-negative breast cancer. Magnetite nanoparticle-reinforced polydimethylsiloxane (PDMS) nanocomposites were fabricated with weight percentages of 1%, 5%, and 10% magnetite nanoparticles. The nanocomposites were exposed to incident Near Infrared (NIR) laser beams with well-controlled powers. The laser-induced heating is explored in: (i) heating liquid media (deionized water and cell growth media [Leibovitz L15+]) to characterize the photothermal properties of the nanocomposites, (ii) in vitro experiments that explore the effects of localized heating on triple-negative breast cancer cells, and (iii) experiments in which the laser beams penetrate through chicken tissue to heat up nanocomposite samples embedded at different depths beneath the chicken skin. The resulting plasmonic laser-induced heating is explained using composite theories and heat transport models. The results show that the laser/nanocomposite interactions decrease the viability of triple-negative breast cancer cells (MDA-MB-231) at temperatures in the hyperthermia domain between 41 and 44°C. Laser irradiation did not cause any observed physical damage to the chicken tissue. The potential in vivo performance of the PDMS nanocomposites was also investigated using computational finite element models of the effects of laser/magnetite nanocomposite interactions on the temperatures and thermal doses experienced by tissues that surround the nanocomposite devices. The implications of the results are then discussed for the development of implantable nanocomposite devices for localized treatment of triple-negative breast cancer tissue via hyperthermia., (© 2022 Wiley Periodicals LLC.)

The adhesive interactions between molecular recognition units (such as specific peptides and antibodies) and antigens or other receptors on the surfaces of tumors are of great value in the design of targeted nanoparticles and drugs for the detection and treatment of specific cancers. In this paper, we present the results of a combined experimental and theoretical study of the adhesion between Luteinizing Hormone Releasing Hormone (LHRH)/Epherin type A2 (EphA2)-AFM coated tips and LHRH/EphA2 receptors that are overexpressed on the surfaces of human Triple Negative Breast Cancer (TNBC) tissues of different histological grades. Following a histochemical and immuno-histological study of human tissue extracts, the receptor overexpression, and their distributions are characterized using Immunohistochemistry (IHC), Immunofluorescence (IF), and a combination of fluorescence microscopy and confocal microscopy. The adhesion forces between LHRH or EphA2 and human TNBC breast tissues are measured using force microscopy techniques that account for the potential effects of capillary forces due to the presence of water vapor. The corresponding adhesion energies are also determined using adhesion theory. The pull off forces and adhesion energies associated with higher grades of TNBC are shown to be greater than those associated with normal/non-tumorigenic human breast tissues, which were studied as controls. The observed increase in adhesion forces and adhesion energies are also correlated with the increasing incidence of LHRH/EphA2 receptors at higher grades of TNBC. The implications of the results are discussed for the development of targeted nanostructures for the detection and treatment of TNBC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This paper presents the results of an experimental and computational study of the adhesion of triptorelin-conjugated PEG-coated biosynthesized gold nanoparticles (GNP-PEG-TRP) to triple-negative breast cancer (TNBC) cells. The adhesion is studied at the nanoscale using a combination of atomic force microscopy (AFM) experiments and molecular dynamics (MD) simulations. The AFM measurements showed that the triptorelin-functionalized gold nanoparticles (GNP-TRP and GNP-PEG-TRP) have higher adhesion to triple-negative breast cancer cells (TNBC) than non-tumorigenic breast cells. The increased adhesion of GNP-TRP and GNP-PEG-TRP to TNBC is also attributed to the overexpression of LHRH receptors on the surfaces of both TNBC. Finally, the molecular dynamics model reveals insights into the effects of receptor density, molecular configuration, and receptor-ligand docking characteristics on the interactions of triptorelin-functionalized PEG-coated gold nanoparticles with TNBC. A three to nine-fold increase in the adhesion is predicted between triptorelin-functionalized PEG-coated gold nanoparticles and TNBC cells. The implications of the results are then discussed for the specific targeting of TNBC., (Copyright © 2022 Elsevier B.V. All rights reserved.)

This article presents the results of cell-surface interactions on polydimethylsiloxane (PDMS)-based substrates coated with nanoscale gold (Au) thin films. The surfaces of PDMS and PDMS-magnetite (MNP)-based substrates were treated with UV-ozone, prior to thermal vapor deposition (sputter-coated) of thin films of titanium (Ti) onto the substrates to improve the adhesion of Au coatings. The thin layer of Ti was thermally evaporated to improve interfacial adhesion, which was enhanced by a 40-nm thick film microwrinkled/buckled wavy layer of Au, that was coated to enhance cell-surface interactions and protein absorption. Cell-surface interactions were studied on the hybrid surfaces using a combination of optical and fluorescence microscopy. Consequently, cell proliferation and surface cytotoxicity (of the sputter-coated PDMS surfaces) were elucidated by characterizing the metabolic activity in the presence of breast cancer and normal breast cells. The photothermal conversion efficiency associated with laser-materials interactions with the PDMS/PDMS-magnetite-based composites was shown to have an optimum efficiency of ~31.8%. The implications of the results are discussed for potential applications of PDMS nanocomposites in implantable biomedical devices., (© 2021 Wiley Periodicals LLC.)

This paper presents in vitro studies of the sustained release of Annona muricata leaf extracts (AME) from hybrid electrospun fibers for breast cancer treatment. Electrospun hybrid scaffolds were fabricated from crude AME extracts, poly(lactic-co-glycolic acid)/gelatin (PLGA/Ge) and pluronic F127. The physicochemical properties of the AME extract and scaffolds were studied. The antiproliferative effects of the scaffolds were also assessed on breast cancer (MCF-7 and MDA-MB-231) and non-tumorigenic breast (MCF10A) cell lines. Scanning electron microscope micrographs revealed a random network of micro- and submicron fibers. In vitro drug release profiles, governed by quasi-Fickian diffusion at pH 7.4 and non-Fickian super case II at pH 6.7, showed initial burst AME release from the PLGA/Ge-AME and PLGA/Ge-F127/AME fibers at pH 7.4, and burst release from PLGA/Ge-F127/AME (not observed from PLGA/Ge-AME) at pH 6.7. Then, a slower, sustained release of the remaining AME from the fibers, attributed to the onset of degradation of the PLGA/Ge backbone, was observed for the next 72 hr. The cumulative release of AME was 89.33 ± 0.73% (PLGA/Ge-AME) and 51.17 ± 7.96% (PLGA/Ge-F127/AME) at pH 7.4, and 9.27 ± 2.3% and 73.5 ± 4.5%, respectively, at pH 6.7. Pluronic F127 addition increased the drug loading capacity and prolonged the sustained AME release from the fibers. The released AME significantly inhibited the in vitro growth of the breast cancer cells more than the non-tumorigenic cells, due to the induction of apoptosis, providing evidence for using pluronic F127-containing electrospun fibers for sustained and localized AME delivery to breast cancer cells., (© 2021 Wiley Periodicals LLC.)

This article presents the results of the combined effects of RGD (arginine-glycine-aspartate) functionalization and mechanical stimulation on osteogenesis that could lead to the development of implantable robust tissue-engineered mineralized constructs. Porous polycaprolactone/hydroxyapatite (PCL/HA) scaffolds are functionalized with RGD-C (arginine-glycine-aspartate-cysteine) peptide. The effects of RGD functionalization are then explored on human fetal osteoblast cell adhesion, proliferation, osteogenic differentiation (alkaline phosphatase activity), extracellular matrix (ECM) production, and mineralization over 28 days. The effects of RGD functionalization followed by mechanical stimulation with a cyclic fluid shear stress of 3.93 mPa in a perfusion bioreactor are also elucidated. The tensile properties (Young's moduli and ultimate tensile strengths) of the cell-laden scaffolds are measured at different stages of cell culture to understand how the mechanical properties of the tissue-engineered structures evolve. RGD functionalization is shown to promote initial cell adhesion, proliferation, alkaline phosphatase (ALP) activity, and ECM production. However, it does not significantly affect mineralization and tensile properties. Mechanical stimulation after RGD functionalization is shown to further improve the ALP activity, ECM production, mineralization, and tensile properties, but not cell proliferation. The results suggest that combined RGD functionalization and mechanical stimulation of cell-laden PCL/HA scaffolds can be used to accelerate the regeneration of robust bioengineered bone structures., (© 2020 Wiley Periodicals, Inc.)

Multi-colloidal systems exhibit a variety of structural and functional complexity owing to their ability to interact amongst different components into self-assembled structures. This paper presents experimental confirmations that reveal an interesting sharp phase transition during the drying state and in the dried film as a function of diluting concentrations ranging from 100% (undiluted whole blood) to 12.5% (diluted concentrations). An additional complementary contact angle measurement exhibits a monotonic decrease with a peak as a function of drying. This peak is related to a change in visco-elasticity that decreases with dilution, and disappears at the dilution concentration for the observed phase transition equivalent to 62% (v/v). This unique behavior is clearly commensurate with the optical image statistics and morphological analysis; and it is driven by the decrease in the interactions between various components within this bio-colloid. The implications of these phenomenal systems may address many open-ended questions of complex hierarchical structures.

Hybrid composite nanofibers, with the potential to enhance cell adhesion while improving sustained drug release profiles, were fabricated by the blend electrospinning of poly(d,l-lactic-co-glycolic acid) (PLGA), gelatin, pluronic F127 and prodigiosin (PG). Scanning Electron Microscopy (SEM) images of the nanofibers revealed diameters of 1.031 ± 0.851 μm and 1.349 ± 1.264 μm, corresponding to PLGA/Ge-PG and PLGA/Ge-F127/Ge, respectively. The Young's moduli were also determined to be 1.446 ± 0.496 kPa and 1.290 ± 0.617 kPa, while the ultimate tensile strengths were 0.440 ± 0.117 kPa and 0.185 ± 0.480 kPa for PLGA/Ge-PG and PLGA/Ge-F127/Ge, respectively. In-vitro drug release profiles showed initial (burst) release for a period of 1 h to be 26.000 ± 0.004% and 16.000 ± 0.015% for PLGA/Ge and PLGA/Ge-F127 nanofibers, respectively. This was followed by 12 h of sustained release, and subsequent slow sustained release of PG from the composite nanofibers. The cumulative release of PG (for three days) was determined to be 82.0 ± 0.1% for PLGA/Ge and 49.7 ± 0.1% for PLGA/Ge-F127 nanofibers. The release exponents (n) show that both nanofibers exhibit diffusion-controlled release by non-Fickian (zeroth order) and quasi-Fickian diffusion in the initial and sustained release regimes, respectively. The suitability of the composite nanofibers for supporting cell proliferation and viability, as well as improving sustained release of the drug were explored. The in-vitro effects of cancer drug (PG) release were also studied on breast cancer cell lines (MCF-7 and MDA-MB-231 cells). The implications of the results are discussed for the potential applications of drug-nanofiber scaffolds as capsules for localized delivery of chemotherapeutic drugs for the treatment of triple negative breast cancer., Competing Interests: Declaration of competing interest The authors do solemnly declare that there are no conflicts of interest in this work., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Triple-negative breast cancer (TNBC) is more aggressive and difficult to treat using conventional bulk chemotherapy that is often associated with increased toxicity and side effects. In this study, we encapsulated targeted drugs [A bacteria-synthesized anticancer drug (prodigiosin) and paclitaxel] using single solvent evaporation technique with a blend of FDA-approved poly lactic-co-glycolic acid-polyethylene glycol (PLGA&#95;PEG) polymer microspheres. These drugs were functionalized with Luteinizing Hormone-Releasing hormone (LHRH) ligands whose receptors are shown to overexpressed on surfaces of TNBC. The physicochemical, structural, morphological and thermal properties of the drug-loaded microspheres were then characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), Nuclear Magnetic Resonance Spectroscopy (NMR), Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results obtained from in vitro kinetics drug release at human body temperature (37 °C) and hyperthermic temperatures (41 and 44 °C) reveal a non-Fickian sustained drug release that is well-characterized by Korsmeyer-Peppas model with thermodynamically non-spontaneous release of drug. Clearly, the in vitro and in vivo drug release from conjugated drug-loaded microspheres (PLGA-PEG&#95;PGS-LHRH, PLGA-PEG&#95;PTX-LHRH) is shown to result in greater reductions of cell/tissue viability in the treatment of TNBC. The in vivo animal studies also showed that all the drug-loaded PLGA-PEG microspheres for the localized and targeted treatment of TNBC did not caused any noticeable toxicity and thus significantly extended the survival of the treated mice post tumor resection. The implications of this work are discussed for developing targeted drug systems to treat and prevent local recurred triple negative breast tumors after surgical resection.

This paper presents the results of theoretical and experimental studies of the compressive deformation of bamboo (Bambusa Vulgaris-Schrad) in the middle section. The deformation mechanisms are elucidated via in-situ observations of deformation in specimens oriented for loading in directions that are either longitudinal or transverse. Compressive deformation is shown to result in progressive micro-buckling and kink band formation. The onset of micro-buckling is also shown to be well predicted by an Euler buckling model. The critical loads for failure in the transverse orientation are also shown to be consistent with the conditions for shear yielding in the plies with fibers that are oriented in an orthogonal direction to the loading axis., Competing Interests: Declaration of competing interest The authors declare that there are no conflicts of interest in this work., (Copyright © 2020. Published by Elsevier Ltd.)

This paper presents the results of a combined experimental and analytical study of blended FDA-approved polymers [polylactic-co-glycolic acid (PLGA), polyethylene glycol (PEG) and polycaprolactone (PCL)] with the potential for sustained localized cancer drug release. Porous drug-loaded 3D degradable PLGA-PEG and PLGA-PCL scaffolds were fabricated using a multistage process that involved solvent casting and particulate leaching with lyophilization. The physicochemical properties including the mechanical, thermal and biostructural properties of the drug-loaded microporous scaffolds were characterized. The release of the encapsulated prodigiosin (PG) or paclitaxel (PTX) drug (from the drug-loaded polymer scaffolds) was also studied experimentally at human body temperature (37 °C) and hyperthermic temperatures (41 and 44 °C). These characteristic controlled and localized in vitro drug release from the properties of the microporous scaffold were analyzed using kinetics and thermodynamic models. Subsequently, normal breast cells (MCF-10A) were cultured for a 28-day period on the resulting 3D porous scaffolds in an effort to study the possible regrowth of normal breast tissue, following drug release. The effects of localized cancer drug release on breast cancer cells and normal breast cell proliferation are demonstrated for scenarios that are relevant to palliative breast tumor surgery for 16 weeks under in vivo conditions. Results from the in vitro drug release show a sustained anomalous (non-Fickian) drug release that best fits the Korsmeyer-Peppas (KP) kinetic model with a non-spontaneous thermodynamic process that leads to a massive decrease in breast cancer cell (MDA-MB-231) viability. Our findings from the animal suggest that localized drug release from drug-based 3D resorbable porous scaffolds can be used to eliminate/treat local recurred triple negative breast tumors and promote normal breast tissue regeneration after surgical resection., Competing Interests: Declaration of competing interest The authors declare that there are no conflicts of interest in this work., (Copyright © 2020. Published by Elsevier B.V.)

Bulk chemotherapy and drug release strategies for cancer treatment have been associated with lack of specificity and high drug concentrations that often result in toxic side effects. This work presents the results of an experimental study of cancer drugs (prodigiosin or paclitaxel) conjugated to Luteinizing Hormone-Releasing Hormone (LHRH) for the specific targeting and treatment of triple negative breast cancer (TNBC). Injections of LHRH-conjugated drugs (LHRH-prodigiosin or LHRH-paclitaxel) into groups of 4-week-old athymic female nude mice (induced with subcutaneous triple negative xenograft breast tumors) were found to specifically target, eliminate or shrink tumors at early, mid and late stages without any apparent cytotoxicity, as revealed by in vivo toxicity and ex vivo histopathological tests. Our results show that overexpressed LHRH receptors serve as binding sites on the breast cancer cells/tumor and the LHRH-conjugated drugs inhibited the growth of breast cells/tumor in in vitro and in vivo experiments. The inhibitions are attributed to the respective adhesive interactions between LHRH molecular recognition units on the prodigiosin (PGS) and paclitaxel (PTX) drugs and overexpressed LHRH receptors on the breast cancer cells and tumors. The implications of the results are discussed for the development of ligand-conjugated drugs for the specific targeting and treatment of TNBC.

This paper presents the anomalous release kinetics of a cancer drug (prodigiosin) frompoly-n-isopropyl-acrylamide (P(NIPA))-based gels. The release exponents, n, which correspond to the drug release mechanisms, were found to be between 0.41 and 1.40. This is within a range that include Fickian case I (n = 0.45) and non-Fickian diffusion (case II) (n > 0.45) for cylindrical drug-loaded structures. The results, however, suggest that the release exponents, n, correspond mostly to anomalous case II and super case II transport mechanics with sigmoidal characteristics. The drug release kinetics of the P(NIPA)-based hydrogels are well described by bi-dose functions. The observed drug release behavour is related to the porosity of the hydrogels, which can be controlled by cross-linking and copolymerization with acrylamide, which also improves the hydrophilicity of the gels. The paper also presents the effects of cancer drug release on cell survival (%), as well as the cell metabolic activities of treated cells and non-treated cells. The implications of the results are discussed for the development of implantable thermosensitive gels for the controlled release of drugs for localized cancer treatment.

This paper presents the results of a combined experimental and analytical/computational study of viscoelastic cell deformation and detachment from poly-di-methyl-siloxane (PDMS) surfaces. Fluid mechanics and fracture mechanics concepts are used to model the detachment of biological cells observed under shear assay conditions. The analytical and computational models are used to compute crack driving forces, which are then related to crack extension during the detachment of normal breast cells and breast cancer cells from PDMS surfaces that are relevant to biomedical implants. The interactions between cells and the extracellular matrix, or the extracellular matrix and the PDMS substrate, are then characterized using force microscopy measurements of the pull-off forces that are used to determine the adhesion energies. Finally, fluorescence microscopy staining of the cytosketelal structures (actin, micro-tubulin and cyto-keratin), transmembrane proteins (vimentin) and the ECM structures (Arginin Glycine Aspartate - RGD) is used to show that the detachment of cells during the shear assay experiments occurs via interfacial cracking between (between the ECM and the cell membranes) with a high incidence of crack bridging by transmembrane vinculin structures that undergo pull-out until they detach from the actin cytoskeletal structure. The implications of the results are discussed for the design of interfaces that are relevant to implantable biomedical devices and normal/cancer tissue., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

An improved understanding of the evolution of cell structure and viscoelasticity with cancer malignancy could enable the development of a new generation of biomarkers and methods for cancer diagnosis. Hence, in this study, we present the viscoelastic properties (moduli and viscosities) and the actin cytoskeletal structures of triple negative breast cancer (TNBC) cells with different metastatic potential. These include: MCF-10A normal breast cells (studied as a control); MDA-MB-468 cells (less metastatic TNBC cells), and MDA-MB-231 cells (highly metastatic TNBC cells). A combination of shear assay and digital imaging correlation (DIC) techniques is used to measure the local viscoelastic properties of live breast cells subjected to constant shear stress. The local moduli and viscosities of the nuclei and cytoplasm are characterized using a generalized Maxwell model, which is used to determine the time-dependent creep responses of cells. The nuclei are shown to be stiffer and more viscous than the cytoplasms of the normal breast cells and TNBC cells. The MCF-10A normal breast cells are found to be twice as stiff as the less metastatic MDA-MB-468 breast cancer cells and over ten times stiffer than the highly metastatic MDA-MB-231 breast cancer cells. Similar trends are also observed in the viscosities of the nuclei and the cytoplasms. The measured differences in cell viscoelastic properties are also associated with significant changes in the cell cytoskeletal structure, which is studied using confocal fluorescence microscopy. This reveals significant differences in the levels of actin expression and organization in TNBC cells as they become highly metastatic. Our results suggest that the shear assay measurements of cell viscoelastic properties may be used as effective biomarkers for TNBC diagnosis and screening., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Targeted therapy is an emerging technique in cancer detection and treatment. This paper presents the results of a combined experimental and theoretical study of the specific targeting and entry of luteinizing hormone releasing hormone (LHRH)-conjugated PEG-coated magnetite nanoparticles into triple negative breast cancer (TNBC) cells and normal breast cells. The conjugated nanoparticles structures, cellular uptake of PEG-coated magnetite nanoparticles (MNPs) and LHRH-conjugated PEG-coated magnetite nanoparticles (LHRH-MNPs) into breast cancer cells and normal breast cells were investigated using a combination of transmission electron microscope, optical and confocal fluorescence microscopy techniques. The results show that the presence of LHRH enhances the uptake of LHRH-MNPs into TNBC cells. Nanoparticle entry into breast cancer cells is also studied using a combination of thermodynamics and kinetics models. The trends in the predicted nanoparticle entry times (into TNBC cells) and the size ranges of the engulfed nanoparticles (within the TNBC cells) are shown to be consistent with experimental observations. The implications of the results are then discussed for the specific targeting of TNBCs with LHRH-conjugated PEG-coated magnetite nanoparticles for the early detection and treatment of TNBC., (Copyright © 2018. Published by Elsevier B.V.)

We investigated synthetic strategies for the functionalization of Si(111) surfaces with organic species containing amine moieties. We employed the functionalized surfaces to chemically "glue" perovskites to silicon with efficient electron transfer and minimal oxidation leading to deleterious recombination at the silicon substrate. A two-step halogenation-alkylation reaction produced a mixed allyl-methyl monolayer on Si(111). Subsequent reactions utilized multiple methods of brominating the allyl double bond including reaction with HBr in acetic acid, HBr in THF, and molecular bromine in dichloromethane. Reaction with ammonia in methanol effected conversion of the bromide to the amine. X-ray photoelectron spectroscopy (XPS) quantified chemical states and coverages, transient-microwave photoconductivity ascertained photogenerated carrier lifetimes, atomic force microscopy (AFM) quantified perovskite-silicon adhesion, and nonaqueous photoelectrochemistry explored solar-energy-conversion performance. The HBr bromination followed by the amination yielded a surface with ∼10% amine sites on the Si(111) with minimal oxide and surface recombination velocity values below 120 cm s -1 , following extended exposures to air. Importantly, conversion of amine sites to ammonium and deposition of methylammonium lead halide via spin coating and annealing did not degrade carrier lifetimes. AFM experiments quantified adhesion between perovskite films and alkylammonium-functionalized or native-oxide silicon surfaces. Adhesion forces/interactions between the perovskite and the alkylammonium-functionalized films were comparable to the interaction between the perovskite and native-oxide silicon surface. Photoelectrochemistry of perovskite thin films on alkylammonium-functionalized n + -Si showed significantly higher V oc than n + -Si with a native oxide when in contact with a nonaqueous ferrocene +/0 redox couple. We discuss the present results in the context of utilizing molecular organic recognition to attach perovskites to silicon utilizing organic linkers so as to inexpensively modify silicon for future tandem-junction photovoltaics.

This paper explores the adhesion of biosynthesized gold nanoparticles (AuNPs) and gold (Au) nanoparticle/prodigiosin (PG) drug nanoparticles to breast cancer cells (MDA-MB-231 cells). The AuNPs were synthesized in a record time (less than 30 s) from Nauclea latifolia leaf extracts, while the PG was produced via bacterial synthesis with Serratia marcescens sp. The size distributions and shapes of the resulting AuNPs were characterized using transmission electron microscopy (TEM), while the resulting hydrodynamic diameters and polydispersity indices were studied using dynamic light scattering (DLS). Atomic Force Microscopy (AFM) was used to study the adhesion between the synthesized gold nanoparticles (AuNPs)/LHRH-conjugated AuNPs and triple negative breast cancer cells (MDA-MB-231 cells), as well as the adhesion between LHRH-conjugated AuNP/PG drug and MDA-MB-231 breast cancer cells. The adhesion forces between LHRH-conjugated AuNPs and breast cancer cells are shown to be five times greater than those between AuNPs and normal breast cells. The increase in adhesion is shown to be due to the over-expression of LHRH receptors on the surfaces of MDA-MB-231 breast cancer cells, which was revealed by confocal immuno-fluorescence microscopy. The implications of the results are then discussed for the selective and specific targeting and treatment of triple negative breast cancer.

This paper presents the results of an experimental study of the adhesion forces between components of model conjugated magnetite nanoparticle systems for improved selectivity in the specific targeting of triple negative breast cancer. Adhesion forces between chemically synthesized magnetite nanoparticles (CMNPs), biosynthesized magnetite nanoparticles (BMNPs), as well as their conjugated systems and triple negative breast cancer cells (MDA-MB-231) or normal breast cells (MCF 10A) are elucidated at a nanoscale. In all cases, the BMNPs had higher adhesion forces (to breast cancer cells and normal breast cells) than CMNPs. The adhesion of LHRH-conjugated BMNPs or BSA-conjugated BMNPs to cancer cells is shown to be about 6 times to that of normal breast cells. The increase in adhesion forces between luteinizing hormone-releasing hormone, LHRH- or EphA2, a breast specific antibody(BSA)-conjugated BMNPs to breast cancer cells is attributed to van der Waals interactions between the peptides/antibodies from the conjugated nanoparticles and the over-expressed receptors (revealed using immunofluorescence staining) on the surfaces of the breast cancer. The implications of the results are discussed for the selectivity and specificity of breast cancer targeting by ligand-conjugated BMNPs., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The kinetics of degradation and sustained cancer drugs (paclitaxel (PT) and prodigiosin (PG)) release are presented for minirods (each with diameter of ~5 and ~6 mm thick). Drug release and degradation mechanisms were studied from solvent-casted cancer drug-based minirods under in vitro conditions in phosphate buffer solution (PBS) at a pH of 7.4. The immersed minirods were mechanically agitated at 60 revolutions per minute (rpm) under incubation at 37 °C throughout the period of the study. The kinetics of drug release was studied using ultraviolet visible spectrometry (UV-Vis). This was used to determine the amount of drug released at 535 nm for poly(lactic-co-glycolic acid) loaded with prodigiosin (PLGA-PG) samples, and at 210 nm, for paclitaxel-loaded samples (PLGA-PT). The degradation characteristics of PLGA-PG and PLGA-PT are elucidated using optical microscope as well as scanning electron microscope (SEM). Statistical analysis of drug release and degradation mechanisms of PLGA-based minirods were performed. The implications of the results are discussed for potential applications in implantable/degradable structures for multi-pulse cancer drug delivery.

The encapsulation of drugs in polymeric materials has brought opportunities to the targeted delivery of chemotherapeutic agents. These polymeric delivery systems are capable of maximizing the therapeutic activity, as well as reducing the side effects of anti-cancer agents. Prodigiosin, a secondary metabolite extracted from the bacteria, Serratia marcescens, exhibits anti-cancer properties. Prodigiosin-loaded chitosan microspheres were prepared via water-in-oil (w/o) emulsion technique, using glutaraldehyde as a cross-linker. The morphologies of the microspheres were studied using scanning electron microscopy. The average sizes of the microspheres were between 40μm and 60μm, while the percentage yields ranged from 42±2% to 55.5±3%. The resulting encapsulation efficiencies were between 66.7±3% and 90±4%. The in-vitro drug release from the microspheres was characterized by zeroth order, first order and Higuchi and Korsmeyer-Peppas models., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This paper presents the synthesis and physicochemical characterization of biodegradable poly (d,l-lactide-co-glycolide) (PLGA)-based microparticles that are loaded with bacterial-synthesized prodigiosin drug obtained from Serratia marcescens subsp. Marcescens bacteria for controlled anticancer drug delivery. The micron-sized particles were loaded with anticancer drugs [prodigiosin (PG) and paclitaxel (PTX) control] using a single-emulsion solvent evaporation technique. The encapsulation was done in the presence of PLGA (as a polymer matrix) and poly-(vinyl alcohol) (PVA) (as an emulsifier). The effects of processing conditions (on the particle size and morphology) are investigated along with the drug release kinetics and drug-loaded microparticle degradation kinetics. The localization and apoptosis induction by prodigiosin in breast cancer cells is also elucidated along with the reduction in cell viability due to prodigiosin release. The implication of this study is for the potential application of prodigiosin PLGA-loaded microparticles for controlled delivery of cancer drug and treatment to prevent the regrowth or locoregional recurrence, following surgical resection of triple negative breast tumor., (Copyright © 2016 Elsevier B.V. All rights reserved.)

We present the results of swelling experiments on poly(N-isopropylacrylamide) P(NIPA)-based hydrogels. The swelling characteristics of P(NIPA)-based homo-polymer and P(NIPA)-based co-polymers with Acrylamide (AM) and Butyl Methacrylate (BMA), were studied using weight gain experiments. The swelling due to the uptake of biosynthesized cancer drug, prodigiosin (PG), was compared to swelling in controlled environments (distilled water (DW), paclitaxel™ (PT) and bromophenol blue (BB)). PG was synthesized with Serratia marcescens (SM) subsp. marcescens bacteria. The mechanisms of drug diffusion and swelling of P(NIPA)-based hydrogels are also elucidated along with characterizing the heterogeneous porous structure of the P(NIPA)-based hydrogels. High Performance Liquefied Chromatography (HPLC) analysis revealed the purity of the biosynthesized prodigiosin to be 92.8%. PG was then absorbed by P(NIPA)-based hydrogels at temperatures between 28-48°C. This is a temperature range that might be encountered during the implantation of biomedical devices for localized cancer treatment via drug delivery and hyperthermia. The results obtained are shown to provide insights for the design of implantable biomedical devices for the localized treatment of breast cancer., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This paper presents the results of an experimental study of the biosynthesis of magnetite nanoparticles (BMNPs) with particle sizes between 10 nm and 60 nm. The biocompatible magnetic nanoparticles are produced from Magnetospirillum magneticum (M.M.) bacteria that respond to magnetic fields. M.M. bacteria were cultured and used to synthesize magnetite nanoparticles. This was done in an enriched magnetic spirillum growth medium (EMSGM) at different pH levels. The nanoparticle concentrations were characterized with UV-Visible (UV-Vis) spectroscopy, while the particle shapes were elucidated via transmission electron microscopy (TEM). The structure of the particles was studied using X-ray diffraction (XRD), while the hydrodynamic radii, particle size distributions and polydispersity of the nanoparticles were characterized using dynamic light scattering (DLS). Carbodiimide reduction was also used to functionalize the BMNPs with a molecular recognition unit (luteinizing hormone releasing hormone, LHRH) that attaches specifically to receptors that are over-expressed on the surfaces of most breast cancer cell types. The resulting nanoparticles were examined using Fourier Transform Infrared (FTIR) spectroscopy and quantitative image analysis. The implications of the results are then discussed for the potential development of magnetic nanoparticles for the specific targeting and treatment of breast cancer., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This paper presents an implantable encapsulated structure that can deliver localized heating (hyperthermia) and controlled concentrations of prodigiosin (a cancer drug) synthesized by bacteria (Serratia marcesce (subsp. marcescens)). Prototypical Poly-di-methyl-siloxane (PDMS) packages, containing well-controlled micro-channels and drug storage compartments, were fabricated along with a drug-storing polymer produced by free radical polymerization of Poly(N-isopropylacrylamide)(PNIPA) co-monomers of Acrylamide (AM) and Butyl-methacrylate (BMA). The mechanisms of drug diffusion of PNIPA-base gels were elucidated. Scanning Electron Microscopy (SEM) was also used to study the heterogeneous porous structure of the PNIPA-based gels. The release exponents, n, of the gels were found to between 0.5 and 0.7. This is in the range expected for Fickian (n=0.5). Deviation from Fickian diffusion was also observed (n>0.5) diffusion. The gel diffusion coefficients were shown to vary between 2.1×10(-12)m(2)/s and 4.8×10(-6)m(2)/s. The implications of the results are then discussed for the localized treatment of cancer via hyperthermia and the controlled delivery of prodigiosin from encapsulated PNIPA-based devices., (Copyright © 2014 Elsevier B.V. All rights reserved.)