Search

Background: Treatment of patients with Crowe type III and IV dislocated hips is challenging because of the hip deformity in these patients. In addition to the usual total hip replacement, shortening and reduction of the femur are often required. We herein report on our surgical technique using a monoblock cylindrical cementless stem and a direct lateral approach. Methods: This study included patients with a diagnosis of severe developmental dysplasia of the hip (Crowe types III and IV) who underwent primary total hip arthroplasty at our hospital from August 2019 to January 2022. Eleven hips of seven patients were treated. All patients underwent horizontal osteotomy using a monoblock cylindrical cementless stem and a direct lateral approach. Complications such as dislocation, infection, and implant dropout were evaluated. In addition, the clinical assessment included the hip range of motion at the last observation and hip function based on the Japanese Orthopaedic Association (JOA) hip score and the Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ). Results: The average operation time was 224 min (range, 194–296 min), and the average bleeding amount was 396.1 g (range, 20–1010 g). The main complications were acetabular implant dislocation, postoperative dislocation, intraoperative arterial injury, intraoperative proximal femoral fracture, subsidence of femoral implant. and postoperative pulmonary infarction, which occurred in one patient each. Conclusion: Total hip arthroplasty for Crowe type III and IV hips is associated with various surgical technical difficulties because of its anatomical characteristics. While patients with severe osteoporosis are contraindicated, the use of a cylindrical monoblock cementless stem and the direct lateral approach makes it possible to simplify the procedure for shortening the femur and increase the indications for surgery. Level of evidence: Therapeutic Level Ⅳ.

Background: Although surgeons must perform implantation of the cementless stem during total hip arthroplasty (THA) without complications, assessment is left to the surgeon’s intuitive judgement, which could contain inter/intra-observer bias variety. We therefore asked (1) whether the sound created during the stem implantation could be evaluated objectively and (2) whether those sounds are correlate to the complication specific to the cementless stems. Our hypothesis is that the sounds produced during stem insertion could be quantified and related to the complications. Patients and method: In 71 THAs, we quantified the sound produced during stem insertion and investigated the relationship between these sounds and the occurrence of intraoperative fracture and subsidence. Results: The sound data were divided into two patterns: Patterns A and B. The difference between the peak value (dB) at the most common frequency (near 7 kHz) and the second most common frequency (near 4 kHz) of strikes during the final phase of implantation in Patterns A and B showed a significant difference. Adverse events on intraoperative fracture and subsidence were significantly less common in patients with Pattern A than in those with Pattern B (six of 42 hips with Pattern A and 13 of 29 hips with Pattern B, p = 0.004). Pattern A in predicting a clinical course without those adverse events was 69.2% and the specificity was 68.4%. Positive and negative predictive values were 85.7% and 44.8%, respectively. Conclusion: The sound generated during stem insertion was quantified. Those sound patterns were associated with complications.

Background: In recent years, the use of tapered-wedge short stems has increased due to their ability to preserve bones and tendons. Surgical techniques occasionally result in a varus position of the stem, which is particularly pronounced in short stems. Although the varus position is not clinically problematic, there are reports of an increased incidence of stress shielding and cortical hypertrophy. Thus, we evaluated and examined the acceptable range of varus angles using finite element analysis., Methods: Patients diagnosed with osteoarthritis of the hip joint who had undergone arthroplasty were selected and classified into three types [champagne-flute (type A), intermediate (type B), and stovepipe (type C)]. Finite element analysis was performed using Mechanical Finder. The model was created using a Taperloc microplasty stem with the varus angle increased by 1° from 0° to 5° from the bone axis and classified into seven zones based on Gruen's zone classification under loading conditions in a one-leg standing position. The volume of interest was set, the mean equivalent stress for each zone was calculated., Results: A significant decrease in stress was observed in zone 2, and increased stress was observed in zones 3 and 4, suggesting the emergence of a distal periosteal reaction, similar to the results of previous studies. In zone 2, there was a significant decrease in stress in all groups at a varus angle ≥ 3°. In zone 3, stress increased from ≥ 3° in type B and ≥ 4° in type C. In zone 4, there was a significant increase in stress at varus angles of ≥ 2° in types A and B and at ≥ 3° in type C., Conclusion: In zone 2, the varus angle at which stress shielding above Engh classification grade 3 may appear is expected to be ≥ 3°. Distal cortical hypertrophy may appear in zones 3 and 4; the narrower the medullary cavity shape, the smaller the allowable angle of internal recession, and the wider the medullary cavity shape, the wider the allowable range. Long-term follow-up is required in patients with varus angles > 3°., (© 2024. The Author(s).)

Competing Interests: Declaration of competing interest None.

Competing Interests: There are no conflicts of interest.

Purpose: During distal tibial oblique osteotomy, external fixators can increase pin site infection risk, whereas plates can cause wound necrosis, necessitating a compromise between soft-tissue position and length. We provide the first report of the early results of intramedullary nail fixation in these osteotomies for avoiding soft tissue complications., Methods: Ten ankles, classed as Takakura-Tanaka stages 3a to 4 and unclassified and treated via distal tibial oblique osteotomy for ankle osteoarthritis between 2017 and 2021, were included. Osteotomy was performed obliquely from the distal medial tibia to the tibiofibular joint. The distal tibial fragment was rotated distally in the coronal plane for realignment. An intramedullary nail fixation was applied for stabilization. The resulting gap was filled with iliac bone graft. Ankles were evaluated on the Japanese Society for Surgery of the Foot ankle-Hindfoot Scale and Self-Administered Foot Evaluation Questionnaire before surgery and at final follow-up. Radiographic assessments were performed., Results: Bone union was achieved within 3 months in all patients. There were no cases of wound necrosis or correction loss postsurgery. Japanese Society scale scores significantly improved from 40.3 ± 15.9 to 87.5 ± 12.6 (P < 0.01). Mean self-evaluation scale scores (pain and pain-related, physical functioning and daily living, social functioning, general health and well-being) improved significantly. shoe-related scores did not change significantly but improved. There was no correction loss after surgery, with an average widening of 24.2 mm and opening angle of 22.6° at the osteotomy site., Conclusion: Our study showed that intramedullary nail for fixation of the osteotomy site in distal tibial oblique osteotomy effectively prevents soft tissues complications even in osteotomy sites with large openings.

Purpose: Currently, sacroiliac joint dislocations, including crescent fracture-dislocations, are treated using several techniques that have certain issues. We present the technical details and clinical outcomes of a new technique, anterior sacroiliac stabilisation (ASIS), performed using spinal instrumentation., Methods: ASIS is performed with the patient in a supine position via the ilioinguinal approach. The displacements are reduced and fixed by inserting cancellous screws from the sacral ala and iliac brim; the screw heads are bridged using a rod and locked. We performed a retrospective review of patients with iliosacral disruption who underwent ASIS between May 2012 and December 2020 at two medical facilities. The patients were assessed for age, sex, injury type, associated injuries, complications, functional outcome by evaluating the Majeed pelvic score after excluding the sexual intercourse score and fracture union., Results: We enrolled 11 patients (median age: 63 years). The median operative time was 195 min, median blood loss was 570 g, and eight patients (72.3%) required blood transfusion. The sacral and iliac screws had a diameter of 6.0-8.0 mm and 6.2-8.0 mm, and a length of 50-70 mm and 40-80 mm, respectively. Bone union was achieved with no marked loss of reduction in the median follow-up period of 12 months in all cases. The median Majeed score at the final follow-up was 85/96., Conclusion: ASIS is a rigid internal fixation method that provides angular stability. Despite invasiveness issues compared to iliosacral screw fixation, this method is easy to confirm and achieves precise reduction., (© 2022. The Author(s).)

Introduction: Stable fixation with a wide-foot-plate expandable cage and lateral lumbar interbody fusion (LLIF) cage has been reported as the ideal treatment for vertebral pseudarthrosis or deformity after an osteoporotic vertebral fracture. (OVF). The procedure requires anterior surgery, which may be associated with unique complications. Therefore, we performed a novel procedure consisting of posterior vertebral column resection (PVCR) using a lateral lumbar interbody fusion LLIF cage., Case Presentation: In 2020, we prospectively studied three patients (one male and two female patients; mean age, 75.1 years) who underwent posterior insertion of a lateral lumbar interbody fusion LLIF cage for kyphotic deformity due to osteoporotic vertebral fractures. OVFs. The affected levels were L1, T12, and T11 in patients one, two, and three, respectively. The cage trajectory was confirmed by simulating the procedure using PowerPoint® software. Radiological outcomes were assessed using the angle of local kyphosis pre-preoperatively and postoperatively, and the clinical outcomes and neurological complications were reviewed. We inserted the cage smoothly and optimally in all three patients without sacrificing the nerve root, consistent with our pre-operative simulations. The mean operation time was 405 min (range, 368-433 min), and the mean blood loss was 845 mL (range, 800-865 mL). The mean local kyphotic angle was 46.3° preoperatively and 16.3° two2 weeks postoperatively. The pre-operative low back pain disappeared in all the patients. Post-operative neurological complications occurred in two of the patients, but did not interfere with walking rehabilitation., Conclusion: The present study is the first to demonstrate that posterior insertion of a lateral lumbar interbody fusionLLIF cage is feasible in patients undergoing posterior vertebral column resection.PVCR., Competing Interests: Conflict of Interest: Nil, (Copyright: © Indian Orthopaedic Research Group.)

Introduction: A virtual reality simulator developed for orthopaedic and trauma surgical training has been introduced. However, it is unclear whether the experiences of actual surgery are reflected in virtual reality simulation surgery (VRSS) using a simulator. The aim of this study is to investigate whether the results in VRSS differ between a trauma expert and a trauma novice., Methods: In Group A (expert), there are ten orthopaedic trauma surgeons and in Group B (novice) ten residents within 2 years after medical school graduation. VRSS for a femoral neck fracture using Hansson hook-pins (Test 1) and Hansson twin hook plate (Test 2) was performed. The parameters evaluated were total procedure time (s), fluoroscopy time (s), number of times X-ray was used (defined by the number of times the foot pedal was used), number of retries in guide placement, and final implant position., Results: In Test 1, the averages of four parameters (distance to posterior cortex (p = 0.009), distal pin distance above lesser trochanter (p = 0.015), distal pin hook angular error (p = 0.004), and distal pin tip distance to centre (lateral) (p = 0.015)) were significantly different between Groups A and B. In Test 2, no parameters in a mean were significantly different between groups, but seven parameters in a variance (guide wire distance to joint surface (p = 0.0191), twin hook length outside barrel (p = 0.011), twin hook tip distance to centre (lateral) (p = 0.042), twin hook distance to centre of lateral cortex (lateral) (p = 0.016), plate end alignment error (lateral) (p = 0.027), guide wire angle with lateral cortex (front) (p = 0.024), and 3.2-mm drill outside cortex (p = 0.000)) were significantly different between groups. In Test 1, Group B showed significantly longer fluoroscopy time than Group A (p = 0.044). In Test 2, Group B showed significantly fewer instances of X-ray use than Group A (p = 0.046)., Conclusions: Our study showed that the experiences of actual surgery are reflected in the result of VRSS using the simulator.

A patent foramen ovale provides a portal through which a thrombus might pass from the right side of the circulation to the left. A 65-year-old man underwent high tibial osteotomy after the diagnosis of the right knee osteoarthritis. On postoperative day 12, he developed bilateral arm paresthesia. Enhanced CT revealed emboli in the bilateral pulmonary and subclavian arteries and deep vein thrombosis in the left lower limb. Transesophageal echocardiography after treatment revealed a patent foramen ovale during the Valsalva maneuver. It was thought that bilateral arm paresthesias were caused by the arterial emboli in the bilateral subclavian arteries., (Copyright © 2019 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the American Academy of Orthopaedic Surgeons.)

Background Treatment of volar-displaced distal radius fractures (DRF) accompanied by marginal rim fragment has recently been actively discussed. It is difficult to obtain a sufficient buttress effect on this fragment. Therefore, we actively apply a distal volar locking plate (DVLP) to fractures with this fragment. Here, we report the treatment outcomes and caveats of surgery of fractures with this fragment. Materials and Methods The subjects were 32 patients (male: 11, female: 21, and mean age: 59.4 years) with volar dislocated DRF accompanied by the marginal rim fragment treated using DVLP. The fracture type of AO classification was B3 in 6 patients, C1 in 12, C2 in 6, and C3 in 8. Results The mean duration of follow-up was 13.8 (12-30) months. The plate could be covered with the pronator quadratus muscle in surgery in all patients. On the final follow-up, visual analog scale score was 1.4/10, quick disabilities of the arm, shoulder, and hand score was 9.2/100, and the Mayo wrist score was 93.7/100. No complication was observed in the soft tissue, such as the nerves and flexor tendons. Conclusion The factor determining retention of the reduction position of the marginal rim fragment is a sufficient buttress effect, and DVLP is a useful implant in terms of this point.

Background: The upper limb surgery under the ultrasound-guided brachial plexus block is becoming popular due to its safety, effectiveness, and convenience. However, the uneven distribution of anesthesiologists become a social problem. Ultrasound-guided brachial plexus block by surgeons has been widespread especially in hand surgeons. We report the surgical treatment of distal radius fractures under the ultrasound-guided brachial plexus block performed by surgeons in our hospital. Methods: The subjects were 101 patients (41 males and 60 females, average age 61.6 years) who underwent surgery for distal radius fractures under ultrasound-guided brachial plexus block administered by orthopedists at our university or related facilities between January 2014 and June 2016. Brachial plexus block was administered through the supraclavicular approach. The time from initiation of anesthesia to initiation of surgery, mean operative time, the presence or absence of additional anesthesia (local infiltration anesthesia, intravenous anesthesia, and general anesthesia), and complications were evaluated. Results: The mean time from brachial plexus block to initiation of surgery was 35.7 (20-68) minutes, and the mean operative time was 90.5 (35-217) minutes. Surgery was completed with brachial plexus block alone in 62 patients (61.4%), and additional anesthesia was necessary in 39 patients (38.6%). Furthermore, general anesthesia was employed in 6 patients (5.9%). No serious complications occurred. Conclusions: According to our results, the operation could be completed with brachial plexus block alone and additional local infiltration anesthesia or intravenous anesthesia in 94.1% (95 cases). However, 6 cases (5.9%) shifted to general anesthesia. Although it needs training, we consider that hand surgery including distal radius fractures treatment under the ultrasound-guided brachial plexus block is possible. On the other hand, cooperation or a cooperative system with anesthesiologists is necessary for surgeons to administer this anesthesia.

Hemophilia A is a congenital bleeding disorder caused by an X-linked hereditary pattern. Female hemophilia A carriers are usually asymptomatic, although some have far lower levels of clotting factor because more X chromosomes with the normal gene are switched off, a phenomenon referred to as "lyonization." During a medical checkup at our hospital, a 56-year-old Japanese woman with coxalgia was also diagnosed as an obligate hemophilia A carrier based on World Federation of Hemophilia criteria. She underwent total hip arthroplasty using blood product coagulation factor VIII to address her hemophilia. Immediate female relatives (mother, sisters, daughters) of a person with hemophilia should have their clotting factor levels checked, especially prior to any invasive intervention or childbirth, or if any symptoms occur.

Posterior tibial stress fractures are more frequent than anterior tibial stress fractures, and they are considered to have a good prognosis for returning to sports; cases leading to a complete fracture are rare. A 17-year-old male involved in high school athletics middle-distance running had a 3-week history of pain with training. He was running up to 300 km/week on streets and cross-country in an even distribution. He had posterior tibial stress fractures, but despite the lower leg pain, he continued running. One year later, he was brought to the emergency department after having sustained an injury to the right lower leg while running in a middle-distance race; bilateral tibial stress fractures, with one side complete and the opposite side incomplete, had developed simultaneously. This relatively rare case of bilateral posterior stress fractures, with one side a complete fracture and the opposite side an incomplete fracture, that was treated surgically via exchange intramedullary nailing is reported. The patient could begin light jogging from 3 months after surgery and was without symptoms at 5 months after surgery. He could resume middle-distance racing after 1 year. Posterior tibial cortical fractures are more common and respond better to conservative treatment than anterior tibial stress fractures, and they are a common fracture type in runners. We believe that close, careful follow-up is necessary if patients continue excessive training.

Introduction: In total hip arthroplasty via a direct anterior approach, the femur must be elevated at the time of femoral implant placement. For adequate elevation, division of the posterior soft tissues is necessary. However, if we damage and separate the posterior muscle tissue, we lose the benefits of the intermuscular approach. Furthermore, damage to the posterior soft tissue can result in posterior dislocation. We investigate that protecting the posterior soft tissue increases the joint stability in the early postoperative period and results in a lower dislocation rate., Methods: We evaluated muscle strength recovery by measuring the maximum width of the internal obturator muscle on CT images (GE-Healthcare Discovery CT 750HD). We compared the maximum width of the muscle belly preoperatively versus 10 days and 6 months postoperatively. As clinical evaluations, we also investigated the range of motion of the hip joint, hip joint function based on the Japanese Orthopaedic Association hip score (JOA score), and the dislocation rate 6 months after surgery., Results: The width of the internal obturator muscle increased significantly from 15.1 ± 3.1 mm before surgery to 16.4 ± 2.8 mm 6 months after surgery. The JOA score improved significantly from 50.8 ± 15.1 points to 95.6 ± 7.6 points. No dislocations occurred in this study., Conclusions: We cut only the posterosuperior articular capsule and protected the internal obturator muscle to preserve muscle strength. We repaired the entire posterosuperior and anterior articular capsule. These treatments increase joint stability in the early postoperative period, thus reducing the dislocation rate., Level of Evidence: Therapeutic, Level IV.

Purpose: Spinopelvic fixation and triangular osteosynthesis give firm internal fixation for unstable pelvic ring injuries (UPRI), but with sacrifice of mobility of the lumbar spine. Here, we describe the procedure and outcomes of a new approach, which we refer to as "within ring"-based sacroiliac rod fixation (SIRF)., Methods: The patient was placed in a prone position and longitudinal skin incisions were made at the medial margins of the bilateral posterior superior iliac spines (PSIS). After reduction of fracture, a pedicle screw was inserted into the first sacral vertebra on the injured side and iliac screws inserted through the bilateral PSIS were bridged using rods., Results: SIRF was performed in 15 patients. The AO/OTA classification was 61-B2.3 in 1, C1.3 in 4, C2.3 in 7, C3.3 in 1, and H-type spinopelvic dissociation in two cases. The mean operative time was 179 (110-298) minutes, mean blood loss was 533 (100-2700) cc. One patient died during hospitalization and three patients stopped outpatient treatment. The other 11 patients achieved bone union without major loss of reduction in a mean post-operative follow-up period of 23.8 (4-50) months. The mean Majeed score at final follow-up was 86.7 (73-96) out of 96, excluding scoring sexual intercourse., Conclusions: "Within ring"-based SIRF not including the lumbar spine in the fixation range is a simple, safe, and low-invasive internal fixation method for UPRI.

Purpose: The aim of this study was to compare the fixation power of sacroiliac rod fixation (SIRF), which was developed based on our original "within ring" concept to exclude the lumbar vertebra from the fixation range, and spinopelvic fixation (SPF) in a biomechanical experiment., Methods: SPF and SIRF were applied to the posterior element in four bones each with the pelvic ring fracture model (AO/OTA classification 61-C1.3). A 300-N axial force was loaded on the fifth lumbar vertebra of the simulated pelvis. Then the stiffness (N/m) and deformation (mm) of SPF and SIRF were determined, and the final displacement (mm) of the fracture region and angular deformity (degrees) were measured. Displacements were measured using the markers at two sites of the sacral fracture [upper margin of the sacral ala (Ala) and second sacral vertebra level (S2)] and one site of the pubic symphysis (PS), and angular deformity was measured at Ala and PS., Results: In SPF and SIRF, the mean stiffnesses and deformations showed no statistically significant difference. Only the vertical displacement at Ala differed significantly between SPF and SIRF (p = 0. 045), and the fixing force of SPF was higher. There was no other significant difference in vertical and horizontal displacement. The mean angular deformities also showed no significant difference between the two methods., Conclusions: In biomechanics experiments, vertical resistance was stronger in SPF-treated than SIRF-treated bone, but stiffness and deformation, horizontal resistance, and angular deformity did not differ significantly.

Rationale: Cubital tunnel syndrome has been recognized as a common pathology in rheumatoid arthritis (RA) of the elbow. We encountered a patient with RA of the elbow showing attrition rupture of the ulnar nerve. This pathology is extremely rare, and we discussed preventive measures for similar cases in the future based on our case., Patient Concerns: A 53-year-old woman, received drug treatment for RA since 30 years earlier, had numbness in the left ulnar nerve territory, dorsal interossei muscle atrophy, and resulting claw hand., Diagnoses: Plain x-ray examination showed bone destruction of the left elbow joint and marked osteophyte formation in the medial joint space. In nerve conduction velocity (NCV) tests, the Motor NCV was immeasurable in the ulnar nerve territory. Based on these findings, a diagnosis of left cubital tunnel syndrome was made, and anterior transposition of the ulnar nerve was planned., Interventions: When the ulnar nerve dissection was advanced, about 80% portion of the ulnar nerve was ruptured. After the ends of the divided nerve were freshened, end-to-end anastomosis was possible by anterior transposition of the ulnar nerve., Outcomes: Two years after the operation, numbness and muscle atrophy also remained. There were no changes in the level of daily activities after the operation. However, motor NCV, showed improvement (22.8 m/s) after the operation., Lessons: In patients with RA showing ulnar neuropathy symptoms, marked osteophyte formation in the medial joint space or valgus deformity may indicate attrition nerve rupture. In the future, when such patients with RA are examined, active nerve exposure and dissection should be considered in terms of ulnar nerve protection.

Distal ulna fractures often occur with distal radius fractures, and their treatment method is still controversial. We considered reduction of the distal radio-ulnar joint (DRUJ) surface the most important factor when treating distal ulna fractures accompanied by residual dislocation. We herein presented a patient with a distal ulna fracture accompanied by dislocation of the DRUJ surface in whom an autogenous bone fragment collected from the radius was grafted onto the ulnar bone defect after open reduction and Herbert screw fixation. In this technique, the bone fragment was supported through the medullary cavity by inserting a Herbert screw, which was less likely to cause irritation between the screw and surrounding tissue, because the screw was almost entirely present in the bone. In addition, an autogenous bone graft from the same surgical field may be less invasive than that from another region.

Purpose: Malalignment of syndesmosis is generally associated with a poor outcome, yet occurs at a high rate in malleolar ankle fractures. In this study, we examine whether malreduction of syndesmosis injury associated with malleolar ankle fracture can be avoided using Weber's three indexes in the mortise view., Materials and Methods: Of 156 patients with malleolar ankle fracture who underwent surgery from December 2012 to March 2016 at two medical facilities, 24 patients who received syndesmotic screw fixation were included in the study. Fractures were Danis-Weber types B and C in 8 (8/134, 6.0%) and 16 (16/22, 72.7%) patients, respectively. Using axial computed tomography (CT), we calculated the difference between injured and non-injured sides for each of three parameters: tibiofibular clear space (TFCS), anterior tibiofibular interval (ATF), and fibular rotation (θ fib ). Malreduction was diagnosed if one or more of the three parameters had an abnormal value. Weber's three indexes in the mortise view on the injured side were used to determine whether reduction of syndesmosis was performed successfully. Consistency between the evaluation of reduction of syndesmosis in axial CT images and reevaluation of mortise views was examined by calculation of sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV)., Results: The rate of malreduction of syndesmosis in axial CT images was 29.2% (7/24). Re-evaluation in the mortise view confirmed malreduction of syndesmosis in six of the seven subjects, all of whom also had malreduction based on axial CT images. The one subject in whom malreduction could not be detected in a mortise view showed an abnormal value only for ATF. Use of the mortise view for perioperative diagnosis had a sensitivity of 0.857, specificity of 1.000, PPV of 1.000, and NPV of 0.944., Conclusion: The results of our study show that malreduction of syndesmosis can be avoided by careful interpretation of intraoperative perspective mortise views based on Weber's three indexes. To increase the diagnostic accuracy further, it is important to detect anteroposterior deviation of the fibula in intraoperative lateral views., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Introduction: Bipolar hip arthroplasty is a good option for treating femoral neck fractures, although some contraindications have been indicated. We report a case of intraoperative dislocation of the trial bipolar cup into the pelvis during bipolar hip arthroplasty., Case Presentation: A 74-year-old woman underwent bipolar hip arthroplasty for a femoral neck fracture (AO31-B2). She was placed in a lateral decubitus position, and a direct lateral approach was used. During intraoperative trial reduction, the trial bipolar cup became disengaged and dislocated into the anterior space of hip joint. Several attempts to retrieve it failed. The permanent femoral component was inserted, and the wound was closed. The patient was repositioned supine to allow an ilioinguinal approach, and the component was easily removed. She had an uneventful, good recovery., Discussion: Several cases of intraoperative dislocation of the femoral trial head during total hip arthroplasty have been reported, this is the first report of dislocation of a bipolar trial cup. A previous report described difficulty retrieving a trial cup., Conclusion: We easily removed our trial cup using another approach. It is vital to plan systematically for this frustrating complication.

Recent reports suggest the presence of a rare fracture type for which reduction and fixation cannot be achieved with volar locking plate (VLP). In particular, it is difficult to achieve reduction and fixation with volar lunate facet (VLF) fragments present on the volar ulnar aspect of the lunate facet, because of the anatomical structure and biomechanics in this region. Herein, we report two challenging cases of difficulty in fixation of the VLF fragment in distal radius fracture. For this fracture type, it is most important to identify the volar ulnar bone fragment before surgery; it may also be necessary to optimize distal placement of the VLP via a dual-window approach and to apply additional fixations, such as a small plate, anchor, and/or external fixation., Competing Interests: The authors declare that they have no competing interests.

Trust has been considered the "cement" of a society and is much studied in sociology and other social sciences. Most studies, however, have neglected one important aspect of trust: it involves an act of forgiving and showing tolerance toward another's failure. In this study, we refer to this concept as "generous trust" and examine the conditions under which generous trust becomes a more viable option when compared to other types of trust. We investigate two settings. First, we introduce two types of uncertainties: uncertainty as to whether trustees have the intention to cooperate, and uncertainty as to whether trustees have enough competence to accomplish the entrusted tasks. Second, we examine the manner in which trust functions in a broader social context, one that involves matching and commitment processes. Since we expect generosity or forgiveness to work differently in the matching and commitment processes, we must differentiate trust strategies into generous trust in the matching process and that in the commitment process. Our analytical strategy is two-fold. First, we analyze the "modified" trust game that incorporates the two types of uncertainties without the matching process. This simplified setting enables us to derive mathematical results using game theory, thereby giving basic insight into the trust mechanism. Second, we investigate socially embedded trust relationships in contexts involving the matching and commitment processes, using agent-based simulation. Results show that uncertainty about partner's intention and competence makes generous trust a viable option. In contrast, too much uncertainty undermines the possibility of generous trust. Furthermore, a strategy that is too generous cannot stand alone. Generosity should be accompanied with moderate punishment. As for socially embedded trust relationships, generosity functions differently in the matching process versus the commitment process. Indeed, these two types of generous trust coexist, and their coexistence enables a society to function well., Competing Interests: The authors have declared that no competing interests exist.

Acetabular fracture is usually treated with osteosynthesis. However, in the case of an intra-articular fracture, osteosynthesis can result in arthropathy of the hip joint and poor long-term results, hence, total hip arthroplasty is required. However, in total hip arthroplasty for postoperative acetabular fracture, sciatic nerve palsy tends to develop more commonly than after primary total hip arthroplasty. This is a case report of a 57-year-old Japanese male who had internal skeletal fixation for a left acetabular fracture that had occurred 2 years earlier. One year later, he developed coxarthrosis and severe pain of the hip joint and total hip arthroplasty was performed. After the second surgery, he experienced pain along the distribution of the sciatic nerve and weakness of the muscles innervated by the peroneal nerve, indicating sciatic nerve palsy. We performed a third operation, and divided adhesions around the sciatic nerve. Postoperatively, the anterior hip joint pain and the buttocks pain when the hip was flexed were improved. Abduction of the fifth toe was also improved. However, the footdrop and sensory disturbance were not improved. A year after the third operation, sensory disturbance was slightly improved but the footdrop was not improved. We believe the sciatic nerve palsy developed when we dislocated the hip joint as the sciatic nerve was excessively extended as the hip joint flexed and internally rotated. Sciatic nerve adhesion can occur easily in total hip replacement for postoperative acetabular fracture; hence, adhesiotomy should be conducted before performing hip dislocation to prevent injury caused by nerve tension. The patient agreed that the details of this case could be submitted for publication. The work has been reported in line with the CARE criteria and cite.

Purpose: There are various types of intertrochanteric fractures that are unstable pertrochanteric fractures of the hip. The aim of this study was to develop a systematic and comprehensive classification of intertrochanteric fractures., Materials and Methods: This study enrolled 74 patients with intertrochanteric fractures treated by us between 2012 and 2015. The fractures were classified using 3D-CT images taken immediately after the fractures occurred based on the course of the lateral fracture line (LFL) that extends through the lateral femoral cortex distal to the vastus ridge of the greater trochanter in the intertrochanteric area. Furthermore, the presence or absence of additional typical fractures was also studied. Then, 4 orthopedic specialists examined the 3D-CT images of 20 patients randomly selected from the 74 patients to evaluate both the inter-rater and intra-rater agreement levels., Results: Intertrochanteric fractures were classified into three types according to the LFL patterns. Type I (41.9%), the Lateral Wall Pattern, has a LFL that extends towards the lateral fiber bundle attachment area of the iliofemoral ligament. Type II (24.3%), the Transverse Pattern, has a LFL that extends towards the medial bundle attachment area. Type III (33.8%), the Reverse Oblique Pattern, has a LFL that extends between the lateral and medial fiber bundle area of the iliofemoral ligament. Each type showed characteristic displacement and was associated with various combinations of typical fractures (fracture across the intertrochanteric line, posteromedial fragment, including the lesser trochanter, posterolateral fragment posterior to the femoral greater trochanter, and banana-shaped big fragment, including both the greater trochanter and the lesser trochanter). The mean κ values for the interobserver and intraobserver agreement levels were 0.77 (0.70-0.85) and 0.76 (0.70-0.85), respectively, which were considered substantial agreement levels., Conclusion: We believe our new classification is a useful communication tool for medical professionals in the diagnosis of fractures., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Introduction: Distal radius fracture (DRF) accompanied by intra-articular volar displaced fragment is difficult to reduce. This volar fragment remains when treated with a simple buttress effect alone, and V-shaped deformity may remain on the articular surface. We attempted to improve dorsal rotational deviation of volar fragment by osteosynthesis applying the condylar stabilizing technique. We report the surgical procedure and results., Materials and Methods: The subjects were 10 cases of DRF accompanied by intra-articular volar displaced fragments surgically treated (mean age: 69 years old). The fracture type based on the AO classification was B3 in 1 case, C1 in 4, C2 in 2, and C3 in 3 cases. All cases were treated with a volar locking plate. Reduction was applied utilizing the angle stability of the volar locking plate, similarly to the condylar stabilizing technique. On the final follow-up, we evaluated clinical and radiologic evaluation. To evaluate V-shaped valley deformity of the articular surface, the depth of the lunate fossa of the radius was measured using computed tomography (CT)., Results: The duration of postoperative follow-up was 11 (6-24) months. Mayo wrist score was 93 (Excellent in 10 cases). No general complication associated with a volar locking plate was noted in any case. Volar tilt on radiography were 11° (4-14). The depth of the lunate fossa on CT was 3.9 ± 0.7 mm in the patients., Conclusion: This procedure may be useful for osteosynthesis of distal radius fracture accompanied by intra-articular volar displaced fragments.

Introduction: Iliopsoas tendinitis after revision total hip arthroplasty (THA) is rare and its etiology and optimal treatment are still unclear. We report a case of iliopsoas impingement after revision THA with a Kerboull acetabular reinforcement device requiring two-level iliopsoas muscle transection., Presentation of Case: A 70-year-old woman presented to our hospital complaining of debilitating right groin pain after revision THA with a Kerboull reinforcement device. She had undergone multiple hip operations after experiencing a pelvic fracture in a motor vehicle accident. A lidocaine nerve block at the level of the Kerboull device resulted in temporary but marked reduction in pain and a diagnosis of psoas impingent. We performed surgery via an anterior approach to release the iliopsoas muscle from the lesser trochanter. After iliopsoas tenotomy was performed, the muscle was still under high tension because of dense adhesions. Repeat transection of the iliopsoas muscle at the level of the anterior branch of the Kerboull device resulted in loosening of the iliopsoas muscle and resolution of impingement. Postoperatively, the patient's groin pain completely disappeared, and she can now walk with a single cane and is satisfied with her result., Discussion: Adhesions around the iliopsoas muscle likely contributed to the patient's groin pain. Open surgery to perform complete release of iliopsoas muscle impingement should be considered in patients with pain after revision THA., Conclusion: We reported a patient with Iliopsoas tendinitis after revision THA requiring two-level iliopsoas muscle transection.

In the present study, the adaptability of the distal radioulnar joint (DRUJ) was evaluated using conventional computed tomography (CT) evaluation methods. In addition, we investigated/compared a new method to evaluate dorsal displacement of the ulnar head. Our subjects consisted of 32 healthy volunteers (64 wrists) and 11 patients (13 wrists) with extensor tendon injuries related to dorsal displacement of the ulnar head. To diagnose instability in the DRUJ based on CT scans, the radioulnar line method and the modified radioulnar line method were measured. Instability was evaluated by the new method that the ulnar head was located on the dorsal side from a line involving the peak of Lister's tubercle in parallel to this baseline was regarded as showing abnormal dorsal displacement of the ulnar head. The diagnostic accuracy of each method was calculated. The sensitivities, specificities, false-positive rates, positive predictive values and the negative predictive value of new methods were better than other two methods. The new method that we recommend is simple. Based on the results of this study, an evaluation of normal/abnormal dorsal displacement of the ulnar head in the DRUJ using the new method may be useful for determining the timing of surgery.

A 61-year-old Japanese man underwent right total hip arthroplasty for hereditary multiple exostosis. At first presentation, he had suffered from coxalgia for a long time. On radiographic images, there was a gigantic femoral head, increased shaft angle, and large diameter of the femoral neck. He had also developed coxarthrosis and severe pain of the hip joint. The transformation of the proximal femur bone causes difficulty in setting a cementless total hip prosthesis. Therefore, total hip arthroplasty using a cemented polished tapered stem was performed via a direct lateral approach. Using a cemented polished tapered stem allowed us to deal with the femoral bone transformation and bone substance defectiveness due to exostosis and also minimized the invasiveness of the operation.

The long-term treatment with anti-resorptive drugs for osteoporotic patients is suggested to be associated with an increase in atypical femoral fractures (AFFs). However, their incidence, patient characteristics, and risk factors have not been fully elucidated especially in Asian countries. This retrospective observational cohort study found fourteen AFFs in ten patients (four bilateral fractures) among 2,238 hip and femoral shaft fractures treated in our associated hospitals between 2005 and 2010; this incidence (0.63%) was similar to Caucasians. Of the ten patients with AFFs, nine (90%) and six (60%) were using bisphosphonates (BPs) and glucocorticoids (GCs), respectively, compared to 14.3 and 8.6% for patients with typical femoral fractures who were using these agents. As comorbid conditions, five patients had collagen disease (CD) and two had diabetes. A fracture location-, age- and gender-matched (1:3) case-control study revealed that administration of BPs, GCs, and suffering from collagen disease (CD) were significant risk factors for developing AFFs [odds ratios 36.0 (95% confidence intervals 3.8-342.2), 13.0 (2.3-74.1) and 9.0 (1.6-50.3), respectively]. Interestingly, all of the patients with atypical subtrochanteric femoral fractures, defined as those within 5 cm of the lesser trochanter, were taking GCs due to CD, and the age of these patients (average of 54.8 years) was significantly younger than those with atypical diaphyseal femoral fractures (average of 77.2 years, p < 0.05). In conclusion, the incidence of AFFs in the Japanese population was similar to that of Caucasians, and taking BPs and GCs and suffering from CD were risk factors for developing AFFs.

Introduction: Treatment of femoral neck fractures in young adults may require total hip arthroplasty or hip hemiarthroplasty using a bipolar cup. The latter can, however, result in migration of the femoral head and poor long-term results., Case Presentation: We report a case of femoral head migration after hemiarthroplasty performed for femoral neck fracture that had occurred 22 years earlier, when the patient (a Japanese man) was 20 years old. He experienced peri-prosthetic fracture of the femur, subsequent migration of the prosthesis, and a massive bone defect of the pelvic side acetabular roof. After bone union of the femoral shaft fracture, the patient was referred to our hospital for reconstruction of the acetabular roof. Intra-operatively, we placed two alloimplants of bone from around the transplanted femoral head into the weight-bearing region of the acetabular roof using an impaction bone graft method. We then implanted an acetabular roof reinforcement plate and a cemented polyethylene cup in the position of the original acetabular cup. Eighteen months post-operatively, X-rays showed union of the transplanted bone., Conclusions: Treatment of femoral neck fractures in young adults is usually accomplished by osteosynthesis, but it may be complicated by femoral head avascular necrosis or by infection or osteomyelitis. In such cases, once an infection has subsided, either hip hemiarthroplasty using a bipolar cup or total hip arthroplasty may be required. However, if the acetabular side articular cartilage is damaged, a bipolar cup should not be used. Total hip arthroplasty should be performed to prevent migration of the implant.

Introduction: It is commonly thought that Salter-Harris type I or II appears in mallet fingers in childhood, with S-H type III appearing in adolescence., Presentation of Case: We present a case of bony mallet finger in childhood. Radiographs showed a small fragment above the distal interphalangeal joint, and this fragment was separated from the dorsal epiphysis without injury to the epiphyseal plate. Open reduction and fixation were performed and bone union was achieved without complications., Discussion: Bony mallet finger in childhood manifests as S-H types I, II, and III in typical cases. However, it depends on narrowing of the epiphysis and the strength of the axial forces on the tip of the distal phalanx. In the case of epiphysis narrowing and only small forces affecting the region, an avulsion fracture without injury to the epiphyseal plate will occur in rare cases., Conclusion: We presented here a rare case of a bony mallet finger in childhood without epiphyseal plate injury., (Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Introduction: We encountered a patient with distal radius fracture (DRF) after proximal row carpectomy (PRC). The mechanism of the DRF after PRC is discussed in this report., Presentation of Case: The patient was a 73-year-old female who had undergone PRC due to Kienböck disease before. The wrist range of motion was: 45° on dorsiflexion and 20° on flexion. DRF has occurred at 3 years after PRC. The fracture type was extra-articular fracture. Osteosynthesis was performed using a volar locking plate. No postoperative complication developed, the Mayo score was excellent at 6 months after surgery, and the daily living activity level recovered to that before injury., Discussion: Since the wrist range of motion decreased and the lunate fitted into the joint surface after PRC, making the forearm join with the hand like a single structure, pressure may have been loaded on the weak distal end of the radius from the dorsal side, causing volar displacement and fracture., Conclusion: The pressure distribution and range of motion of the radiocarpal joint after PRC are different from those of a normal joint, and the mechanism of fracture also changes due to PRC., (Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Purpose: To describe our management of 3 patients with chronic renal failure who sustained distal radius fractures in limbs containing dialysis shunts., Methods: The 3 patients were 48-61 years old, and 2 of them were men. Because the injured limbs contained arteriovenous shunts, tourniquets were not used. Volar locking plate fixation was applied via the Henry approach. The patients' grip strength; visual analog scale scores; Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) scores; modified Mayo scores; and their range of wrist joint motion were assessed during the final follow-up examination. In addition, complications and the presence/absence of dysfunction of the forearm shunt were also investigated., Results: The mean duration of the postoperative follow-up period was 9 months (range, 7-10 mo), and the subjects' mean wrist motion values were 75°, 79°, 78°, and 87° during flexion, extension, pronation, and supination, respectively. Grip strength on the affected side as a percentage of that seen on the healthy side ranged from 71% to 90%. The patients' visual analog scale; QuickDASH; and modified Mayo scores were all excellent, and bone union was achieved in all 3 cases. No shunt dysfunction or skin soft tissue complications were noted., Conclusions: Volar locking plate fixation via the Henry approach might be useful for treating distal radius fractures in cases in which an arteriovenous shunt is present in the same limb. Shunt dysfunction and hemorrhaging are of concern during open surgery, but these were not issues in our patients., Type of Study/level of Evidence: Therapeutic IV., (Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

Introduction: In a patient with recurrent Dupuytren's disease, we performed dermofasciectomy including the diseased skin and soft tissue, and covered the soft tissue defect using an ulnar parametacarpal flap., Case Report: A 65-year-old man had undergone invasive aponeurectomy for Dupuytren's contracture of the right 5th finger 3 years before, but showed recurrence about 1 year after surgery. Since a skin ulcer was noted at the site of recurrence, dermofasciectomy including the scarred skin was performed on the palmar side of the 5th finger, and the skin defect was covered with an ulnar parametacarpal flap. No recurrence has been noted for the 6 months since the surgery., Conclusion: The ulnar parametacarpal flap, in which the vascular pedicle is easy to identify, is useful for covering a skin defect on the palmar side of the 5th finger if used as an island flap. However, a disadvantage of this flap is that it is likely to develop congestion due to poor venous return.

Purpose: Atypical femoral fractures (AFFs) are stress-related fractures that are speculated to associate with long-term treatment with bisphosphonates for osteoporosis. A history of AFF is a high risk factor for the development of a subsequent AFF in the same location of the contralateral femur, suggesting that a patient's individual anatomical factor(s) are related to the fracture site of AFFs. In this study, we investigated the radiographs of fourteen AFFs (four bilateral fractures among ten patients) treated at six hospitals associated with our university between 2005 and 2010. The fracture site and standing femorotibial angle (FTA), which reflects the mechanical axis of the lower limb, were measured on weight-bearing lower limb radiographs. The fracture site and FTA of patients with typical femoral fractures (TFF) were compared to those of patients with AFFs. The correlations were examined using Spearman's rank correlation coefficients. The fracture locations in the femora were almost the same in the patients with bilateral AFFs. There was a positive correlation between the fracture site and the standing FTA in the patients with AFFs (r=0.82, 95% confidence interval; 0.49 to 0.94), indicating that the larger the standing FTA (varus alignment), the more distal the site of the fracture in the femur. The FTA of the patients with atypical diaphyseal femoral fracture were significantly larger compared to that of those with not only atypical subtrochanteric fractures but also TFFs. In conclusion, the fracture sites of AFFs are associated with the standing lower limb alignment, while those of TFFs are not., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Dislocation of the thumb interphalangeal (IP) joint is uncommon because of the inherent stability of the joint. Cases in which reduction was blocked by the volar plate, the flexor pollicis longus (FPL) tendon, the sesamoid bone, and an osteochondral fragment have been described in the literature. This article reports a case of closed thumb IP joint dislocation caused by the displacement of the FPL tendon. A new percutaneous reduction technique for this injury will also be presented. A 63-year-old woman presented to the emergency room with an obvious thumb deformity. Radiographs confirmed dorsal dislocation of the thumb IP joint without associated fracture. Closed reduction was not successful. Percutaneous reduction was performed under locoregional anesthesia, because the dislocation was due to an FPL tendon that had displaced dorsally and radially to the proximal phalanx. After reduction, Kirschner wire fixation was not needed, but IP joint immobilization with a splint was required for 3 weeks. Postoperatively, there were no complications in soft tissues and the operative scar was almost unrecognizable. This technique enables a mini-invasive reduction by operating percutaneously on the FPL. In addition, unlike with a volar zigzag approach, it is possible to suppress the occurrence of postoperative adhesion of the flexor tendon. This new minimally invasive reduction technique is useful for irreducible dislocation of the thumb IP joint due to a displaced FPL tendon.

The patella plays an important role in the knee joint extension, and a patella fracture requires surgical treatment when it is accompanied by displacement of bone fragments and a joint surface gap. In patella fractures, there is disruption of the soft tissue structures that support the knee extension mechanism. We use a method of percutaneous cerclage wiring to fix the patella and include the peripatellar soft tissues in five patients. All cases were closed fractures, and the AO classification was type A in 1 and type C in 4. At a mean follow-up of 11.2 months, union was achieved in four cases with failure in one inferior pole fracture avulsion. There was no extensor lag noted in any patient, with mean flexion at 141° (120-160). As this percutaneous cerclage wiring method includes soft tissue approximation in the wiring, it may be especially suitable for comminuted fractures for which classic tension band wiring techniques cannot be used. We employed this procedure to atraumatically manipulate peripatellar soft tissues together with the fracture fragments in order to obtain optimal restoration of continuity of the extensor mechanism.

Background: Pulmonary thromboembolism after upper extremity operation is rare. We report a patient with thromboembolism after debridement open reduction and internal fixation for bilateral open distal radius fractures., Case Presentation: The Japanese patient was an 80-year-old previously healthy female who was able to walk on her own. She fell down and was taken to our hospital. She was diagnosed with bilateral open distal radius fractures and we performed debridement open reduction and internal fixation on the same day. Although she could not walk and was depressed, she was discharged on the ninth postoperative day. However, on the eleventh postoperative day, she returned to our emergency department with complaints of dyspnea and cold sweat. Her serum D-dimer level was 19.0 μg/dl, troponin T was positive, and urgent contrast computed tomography scan of her thorax revealed thrombosis in the bilateral main pulmonary artery. She was diagnosed with pulmonary thromboembolism and admitted to our hospital again. On the second admission, although she had breathing problems, she did not require a respirator. Oxygen was supplied as well as anticoagulants. On the seventh day after being diagnosed with embolism, thrombosis in the bilateral main pulmonary arteries had disappeared., Conclusion: The patient did not have any "strong" risk factors as reported in the Japanese Orthopedic Association Clinical Practice Guideline on the Prevention of Venous Thromboembolism in Patients Undergoing Orthopedic Treatments. In general, upper extremity operation carries a low risk for pulmonary thromboembolism. For patients with decreased activity of daily living and depression, we should consider postponing discharge and performing rehabilitation until activity of daily living is improved.

Rupture of the triceps tendon is a rare condition. We report a case of triceps tendon rupture with avulsion fracture of the olecranon with discussion about pathogenesis from the viewpoint of healing of the olecranon ossification nucleus. An 18-year-old man presented with avulsion fracture of the olecranon and triceps tendon rupture. Operative treatment was conducted with good results. Rupture of the triceps tendon is a rare injury comprising approximately 2% of all tendon injuries, and avulsion at insertion into the olecranon is the most common site of rupture. This injury is most likely to happen in young people as sports-related trauma. Among young people who have insufficient healing of the olecranon ossification nucleus, avulsion fracture of the olecranon may occur due to strong contraction force of the triceps tendon. Our clinical evidence may suggest that avulsion fracture of the olecranon is related in olecranon ossification center healing. Most triceps tendon ruptures are accompanied by avulsion fracture of the olecranon, and it is important to suspect this injury when radiographs show a small fleck of bone avulsed from the olecranon.

In total hip arthroplasty of the acetabular roof fixed by press-fit without screw fixation, there is little possibility for loosening to occur, because it is difficult for wear debris to enter between the cup and the acetabular roof, as screw holes are not present. However, stability is provided only by contact. In the case of acetabular dysplasia, it is not well understood whether sufficient initial fixation power is provided. We performed a torsion test and a lever-out test. In the torsion test, in the case of a normal hip joint, as the cup grew bigger, the fixation power tended to increase in strength. In the acetabular dysplasia model, with cups of each size, as the protrusion angle increased, the fixation power of the cup tended to become weak. When the protrusion angle approaches 15 degrees, we must use a cup that is 4 mm larger than the original cup to achieve the same initial fixation power. Furthermore, when the protrusion angle is 15 degrees in cups that are over 48 mm in size, we obtain fixation power that is theoretically adequate, but when small cups, for example, 46 mm in size are set with protrusion, the initial fixation power decreases significantly, and we cannot obtain a fixation power that is theoretically adequate.